SHARP LPE276 Technical Report

LASER PRINTER: JX-9200 series

Date

:

Jan. 16, 1998

No. : LPE-276

[Change carried out in parts]

1.CHANGE CARRIED OUT IN PARTS.

2.CHANGE CARRIED OUT IN THE DIAMETER OF THE PAPER
DELIVERY ROLLER.

1. Change carried out in parts.

1.Model Name: JX-9210

2.General: The following changes have been carried out in the parts described below for the

models listed above. This action has been carried out as a measure to improve
productivity.

3.Description:

Part name Old New
FAN belt NBLTH0008GCZ1 NBLTH0008GCA1
Separator PTME-0020GCZZ PTME-0022GCZZ
PU roller NROLP0056GCZ1 NROLP0056GCA1
FU-PSV roller NROLP0091GCZZ NROLP0091GCAZ
PO roller NROLP0095GCZ1 NROLP0095GCA1

SHARP CORPORATION Printer and Scanner Division

1/2

Orange

C

2. Change carried out in the diameter of the paper delivery roller.

1.Model Name: JX-9230

2.General: A change has been carried out in the diameter of the paper delivery roller of the models

listed above. This action has been carried out as a measure to alleviate problems of
streaking on the copy surfaces caused by the ribs of the fusing section.

3.Description:

Part name Old New Roller diameter
PO roller NROLP0057GCAZ NROLP0104GCZZ ø10.5 → ø10.0 [mm]
PO roller L NROLP0066GCAZ NROLP0103GCZZ ø10.5 → ø10.0 [mm]

4.Action: From 1997 March production. (for machines bound for SEEG market destinations).

From 1997 June production. (for all other machines).

Ref.

Model

No.

1 JX-9210

2 JX-9230

<Interchange>

1. Interchangeable. 4. Not interchangeable.

2. Current type can be used in place of new type.

3. Current type cannot be used in place of new type.

Parts marked with ‘‘ ’’ is important for maintaining the safety of the set. Be sure to replace these parts with

specified ones for maintaining the safety and performance of the set.

Version P/G No.

name

1 -1 NBLTH0008GCZ1 NBLTH0008GCA1 AC Fan belt ’97/1
5 -22 PTME-0020GCZZ PTME-0022GCZZ AF Separator ’97/4
3 -15 NROLP0056GCZ1 NROLP0056GCA1 AQ PU roller

All

4 -18 NROLP0091GCZZ NROLP0091GCAZ AE FU-PSV roller
5 -19 NROLP0095GCZ1 NROLP0095GCA1
5 -1 NROLP0057GCAZ NROLP0104GCZZ PO roller
5 -18 NROLP0066GCAZ NROLP0103GCZZ AF PO roller L

New type cannot be used in place of current type.

New type can be used in place of current type.

Current parts New parts

Parts code Parts code

5. Interchangeable if replaced with same types of
related parts in use.

6. Others.

Price
rank

AG

Parts name

PO roller N1

Effec-

tive

time

’97/6

∗ 3

Inter-

change-

ability

∗ From 1997 March production. (for machines bound for SEEG market destinations).

From 1997 June production. (for all other machines).

Note

1

2/2