SHARP LPE267 Technical Report

LASER PRINTER: JX-9685

Date

:

Mar. 28, 1997

(Part change information)

No. : LPE-267

1.PREVENTING DIAGONAL PAPER FEED.

2.THE ADDITION OF A C-TICK STICKER.

1. Preventing diagonal paper feed.

1.Model Name: JX-9685

2.General: We have changed some of the parts used in the front cover of the above model to

prevent diagonal paper feed during two-sided copying.

3.Description: Part name Before change After change

DU spring L MSPRC0280GCZZ MSPRC0261GCZZ
Front cover mylar PSHEP0228GCZZ PSHEP0244GCZZ

Changed DU spring L
(MSPRC0261GCZZ)

Changed front cover mylar SC
(PSHEP0244GCZZ)

Front cover

4.Action: From November, 1996 production on.

SHARP CORPORATION Printer and Scanner Division

1/2

Orange

C

2. The addition of a C-TICK sticker.

1.Model Name: JX-9685

2.General: In order to comply with EMC standards, we have added a C-TICK mark to the standard

mark plate for the Australian version of the above model.

3.Description: A sticker was attached from December, 1996 production on.

As of February, 1997, we have commenced use of a newly printed version of the
standard mark plate.

Ref.

Model

No.

1 JX-9685 All

<Interchange>

1. Interchangeable. 4. Not interchangeable.

2. Current type can be used in place of new type.

3. Current type cannot be used in place of new type.

Parts marked with ‘‘ ’’ is important for maintaining the safety of the set. Be sure to replace these parts with

specified ones for maintaining the safety and performance of the set.

Version P/G No.

name

1 -31 MSPRC0280GCZZ MSPRC0261GCZZ AB DU spring L
1 -29 PSHEP0228GCZZ PSHEP0244GCZZ AC Front cover mylar 4

New type cannot be used in place of current type.

New type can be used in place of current type.

Current parts New parts

Parts code Parts code

5. Interchangeable if replaced with same types of
related parts in use.

6. Others.

Price

rank

Parts name

Effec-

tive

time

’96/11

Inter-

change-

ability

3

Note

2/2