
Date: Jan. 30, 1997
LASER PRINTER: JX-9210
No. : LPE-264
(Part change information)
1.A CHANGE TO THE DRIVER.
2.A CHANGE TO THE SHAPE OF THE LOWER FRAME.
3.A CHANGE TO THE REAR CABINET SHEET.
1. A change to the driver.
1.Model Name: JX-9200/9210
2.General: We have perfected a driver which handles English, Cantonese, and Mandarin.
Therefore, we have discontinued the Mandarin and Cantonese drivers (three floppy
disks) and will replace them with the English/Cantonese/Mandarin (ECM) driver (four
floppy disks). Furthermore, we have changed the Turkish driver in compliance with
requests from the marketplace.
3.Description:
Ref.
Model
No.
name
1 JX-9200
2 JX-9210
3 JX-9210 Turkey UFLPC0060GCZZ UFLPC0027GCZZ English driver
Version
China/Hong Kong UFLPC0045GCZZ
Hong Kong/Taiwan UFLPC0055GCZZ
China/Hong Kong UFLPC0046GCZZ
Hong Kong/Taiwan UFLPC0056GCZZ
Current parts New parts
Parts code Parts code
UFLPC0079GCZZ ECM driver
UFLPC0080GCZZ ECM driver
Parts name
4.Action: From September, 1996 production on.
2. A change to the shape of the lower frame.
1.Model Name: JX-9200/9210/9230
2.General: In the lower frame (type 2), there is an opening near the attachment area. There is no
such opening in the type 1 frame. Condensed steam from the fusing section may pass
through this opening and drop onto the PWB, causing a short circuit. To prevent this
problem, we have changed the molds and sealed this opening.
SHARP CORPORATION Printer and Scanner Division
1/4
Orange
C

3.Description: Before change After change
Lower frame LFRM-0027GCZ2 LFRM-0027GCZ3
Filling the pressure plate hole
FU metal plate gutter
There is an opening in this face
AA
This hole has been completely filled in
Changed section of mold
Cross section A-A
4.Action: From the middle of November, 1996 production.
3. A change to the rear cabinet sheet.
1.Model Name: JX-9200/9210/9230
2.General: To improve productivity, we had been attaching both rear cabinet sheets A (3 sheets)
and B (one sheet), but we will now change that to sheets A (4 sheets) only.
2/4

3.Description: We have changed the sheet pasted in the rear cabinet (rear cabinet sheet B,
PSHEP0178GCZZ) to rear cabinet sheet A (PSHEP0177GCAZ). (See figure below).
Rear cabinet sheet attachment position
Rear cabinet ..... viewed from below
R-CAB-SHT-A
R-CAB-SHT-A
Edge position
Corner section position
R-CAB-SHT-A
R-CAB-SHT-B
Before change
R-CAB-SHT-A
Edge position
R-CAB-SHT-A
After change
Corner
section
position
Edge
position
4.Action: From January, 1997 production (Japan).
From February, 1997 production (SOCC).
Corner section position
3/4

Ref.
Model
No.
name
JX-9200
1
JX-9210
2
JX-9200
JX-9210
3
<Interchange>
1. I nt er ch an ge ab le . 4. N ot i n te r cha ng ea bl e.
2. C urr e nt t y pe c a n be u s ed i n place of n ew type.
New ty pe cann ot be us ed in place of curr ent type .
3. C urr e nt t y pe c a nn ot b e us e d in p l ace o f ne w ty p e.
New t y pe c a n be u sed in pl a ce of cu r ren t ty p e.
Parts marked with “ ” is important for maintaining the safety of the set. Be sure to replace these parts with
specified ones for maintaining the safety and performance of the set.
Version P/G No.
China/Hong Kong
Hong Kong/Taiwan UFLPC0055GCZZ
China/Hong Kong UFLPC0046GCZZ
Hong Kong/Taiwan UFLPC0056GCZZ
Turkey UFLPC0060GCZZ UFLPC0027GCZZ AU English driver
All
!
—
4 -11
2 -62
Current parts New parts
Parts code Parts code
UFLPC0045GCZZ
LFRM-0027GCZ2 LFRM-0027GCZ3 AY Lower frame
PSHEP0178GCZZ PSHEP0177GCAZ AB Rear cabinet sheet A ’97/1
UFLPC0079GCZZ
UFLPC0080GCZZ
Price
rank
AT ECM driver
5. Interchangeable if replaced with same types of
related parts in use.
6. Others.
Parts name
Effec-
tive
time
’96/9
Mid-
’96/11
Inter-
change-
ability
3
Note
4/4