SHARP LPE259 Technical Report
Date: Sep. 11, 1996
LASER PRINTER: JX-9200/9210
(Service Information)
No. : LPE-259
CORRECTIONS CARRIED OUT IN THE
TROUBLE SHOOTING MANUAL.
1.Model Name: JX-9200, JX-9210
2.General: Corrections hav e been carrie d out in the T rouble Shoot ing Manu al (Code:00Z JX9200T RE1)
and are hereby reported.
3.Description: (1)An error was found in the numbers printed in Fig. 24 on page 12 of the Trouble
Shooting Manual and has been corrected as shown in the diagram below.
Error Correct
(2)An error was found in the sentence expressions used in the explanation for no.(11)
“Print difference between right and left” on pages 30 and 31 of the Trouble Shooting
Manual and has been corrected as shown in the text below.
(11) Print difference between right and left
<example>
Print example 12. Print difference between right and left
SHARP CORPORATION Printer and Scanner Division
1/2
Orange
C
Error
.
When a frame almost as large as the printable area printed, if the difference between
a and b exceeds 1.5mm, it is defective. (There is no paper skew.)
→ Replace the transfer roller and the TR spring L together.
Correct
.
When a frame as large as the printable area is printed, if the difference between a and
b is conspicuous (without paper skew):
→ Replace the transfer roller and the TR spring L together.
(3)An error was found in the sentence expressions used in the explanation for no.(12)
“Skew print” on page 31 of the Trouble Shooting Manual and has been corrected as
shown in the text below.
(12) Skew print
<example>
Error
Correct
Print example 13. Skew print
.
When a frame almost as large as the printable area is printed, if the difference between
a and b exceeds 0.8mm, it is defective. (There is no paper skew.)
→ Replace the upper frame unit.
<example>
Print example 13. Skew print
.
If the vertical difference D exceeds 1.0mm when a frame almost as large as the printable
area is printed, the frame shall be considered as defective (there is no paper skew).
→ Replace the upper frame unit.
2/2
Loading...