SHARP LPE230 Technical Report

Date: Feb. 23, 1996

LASER PRINTER: JX-9210

(Part changes)

1.A CHANGE TO THE DR IDLE GEAR

2.A CHANGE TO THE PARTS OF THE FUSING UNIT

3.A CHANGE TO THE FD COVER

1. A change to the DR idle gear.

1.Model name: JX-9200/9210

2.General: In order to correct a pitch error, we have changed the DR idle gear.

No. : LPE-230

3.Description: Before the change After the change
DR idle gear NGERH0072GCZZ NGERH0072GCZ1
(Gear B (small toothed gear) has been rotated
+0.4, and gear A has been made thicker.)

4.Action: From November, 1995 production on.

2. A change to the parts of the fusing unit.

1.Model name: JX-9200/9210

2.General: Parts have been added to and taken from the fusing unit, as indicated below.

3.Description: No. Part name Before the change After the change

➀. Separation spring A MSPRD0227GCZZ MSPRD0227GCZ1
Reason Change in shape to prevent the separation pawl from rotating when
paper jams

➁. Screws XBPSN30P05K0 0 XBPSN30P06 KS0
Reason Correction to the part guide

➂. Polyslider — LX-WZ5004BCZZ
Reason Two polysliders have been added to prevent the delivery roller from jamming

➃. Polyslider — LX-WZ2009SCZZ

SHARP CORPORATION Printer and Scanner Division

1/3

Orange

C

Reason A polyslider has been added to prevent strange noises coming from the FU
idle gear

Added 2 polysliders ±0.5
LX-WZ5004BCZZ

A change to the shape of separation
spring A MSPRD0227GCZ1

Change to the M3x6
screws(SW, W)
XBPSN30P06KS0

Added polyslider
(ø10xø6, Α±0.4)
LX-WZ2009SCZZ

4.Action: From the first lot on.

2/3