SHARP LPE225 Technical Report

Date: Feb. 9, 1996

LASER PRINTER: JX-9210

(Concerning part changes)

No. : LPE-225

1.A CHANGE TO THE FU ROLLER SPECIFICATIONS

2.A CHANGE TO THE SHAPE OF THE PE LEVER

3.THE ATTACHMENT OF A PAPER PRESSURE RIB

1. A change to the FU roller specifications.

1.Model Name: JX-9200/9210

2.General: In order to prevent overshooting, high temperature offset, and wrinkles, we now apply

transparent okitsumo paint (over a range of 158 mm) to the inside face of the FU roller.
As a result, the part code for the FU roller has changed.

3.Description: Before the change After the change
FU-roller NROLM0061GCZ1 NROLM0061GCZ2

FU-roller

4.Action: From October, 1995 production on.

SHARP CORPORATION Printer and Scanner Division

1/3

Orange

C

2. A change to the shape of the PE lever.

1.Model Name: JX-9200/9210

2.General: We have changed the shape of the PE lever to improve efficiency during attachment.

3.Description: Before the change After the change Change

PE lever MLEVP0042GCZZ MLEVP0042GCZ1 Change in the shape of the bearing

4.Action: From February, 1996 production on.

3. The attachment of a paper pressure RIB.

1.Model Name: JX-9200/9210

2.General: We have attached a paper pressure rib to the optical frame drive side rib to prevent the

front end of the paper from folding over.

3.Description:

Added paper pressure rib
(PSHEP0181GCZZ)

Wipe with alcohol

Rib

Attachment location

P

(Arrow P figure)

Attachment location

Optical frame rib

Paper
pressure rib

Attachment location

Optical frame

4.Action: From the middle of December, 1995 production on JX-9210
From the middle of January, 1996 production on JX-9200

2/3