SHARP LPE213 Technical Report
Date: Jul. 28, 1995
LASER PRINTER: JX-9680
[Concerning part changes]
1.CHANGES TO THE SCREWS FOR THE POWER SUPPLY
UNIT AND THE GROUND PLATE
2.A CORRECTION TO THE PART GUIDE OF THE JX-9680
3.A CHANGE IN THE SCREWS USED FOR THE OPU PWB
1. Changes to the screws for the power supply unit and the ground plate.
1.Model Name: JX-9400H / 9400/ 9460 / 9460PS / 9600 / 9600PS / 9660 / 9660PS / 9680
2.General: In order to improve quality, the screws which hold the power supply unit and the ground
plate in place have been changed.
No. : LPE-213
3.Description: Old part code New part code
Screws for the power supply XBPSN40P06K00 XBPBZ40P06K00
unit and ground plate.
4.Action: From Aug., 1995 production on.
2. A correction to the part guide for the JX9680
1.Model Name: JX-9680
2.General: The code for the transport unit in the part guide for the ZX-9680 is incorrect. Please
correct it as follows.
3.Description: Old part code New part code
Transport unit DUNT-0057GC16 DUNT-0057GC19
Transport unit DUNT-0057GC17 DUNT-0057GC20
4.Action: From the first lot on.
SHARP CORPORATION Printer and Scanner Division
1/2
Orange
C
3. A change in the screws used for the OPU PWB.
1.Model Name: JX-9400H / 9400 / 9460 / 9460PS / 9600 / 9600PS / 9660 / 9660PS / 9680
2.General: There was an error in the part guide. Therefore, we are changing the length of the
screws used for the OPU PWB. There was also an error in the part guide regarding
placement of the screws. Please correct this, using the figure below as a reference.
3.Description: Three of the four XEPSD30P08X00 (M3X8) screws should be replaced by
XEPSD30P06X00 (M3X6) screws.
Delete this
25 The one XEPSD30P08X00
(M3X8) screw.
The 3 XEPSD30P06X00
(M3X6) screws.
OPU PWB
4.Action: From June, 1995 production on.
Ref.
Model
No.
JX-9400
series
1
JX-9600
series
2
JX-9680
3 All
<Interchange>
1. Interchangeable. 4. Not interchangeable.
2. C urr e nt t y pe c a n be u s ed i n p la ce of new ty pe .
New ty pe cann ot be us ed i n place of curr ent type .
3. C urre nt ty pe cann ot be used i n place of new ty pe.
New t y pe c a n be u sed in p la ce of curr en t ty p e.
Parts marked with “ ” is important for maintaining the safety of the set. Be sure to replace these parts with
specified ones for maintaining the safety and performance of the set.
name
Version P/G No.
2 -55
All
3-7
120V
series
200V
series
4 -901
1 -25 XEPSD30P08X00 — — Screw(M3X8)
1 — XEPSD30P06X00 AA Screw(M3X6)
!
Current parts New parts
Parts code Parts code
XBPSN40P06K00 XBPBZ40P06K00 AA Screw(4X6K) ’95/8 1
DUNT-0057GC16 DUNT-0057GC19
DUNT-0057GC17 DUNT-0057GC20
Effec-
Price
5. Interchangeable if replaced with same types of
relate d parts in use .
6. Others.
Parts name
rank
BU Transport unit 1 st lot 3
Inter-
tive
change-
time
ability
’95/6 6
Note
change
4→1
Q’ty
2/2
Loading...