SHARP LPE212 Technical Report

Date: Aug. 3, 1995

LASER PRINTER: JX-9660PS

No. : LPE-212

[Concerning part changes]

A CHANGE IN PARTS MADE IN

COMPLIANCE WITH CE-MARK STANDARDS

1.Model Name: JX-9460/PS, JX-9660/PS, JX-96MB1 / MD1 / MH1 / AP1 / PS1 / AP2 / PS2 / RS

2.General: In order to comply with the CE-Mark standards which will take effect in England and

Europe in January, 1996, the following changes are being made.

3.Description: The changes being made in compliance with the CE-Mark standards are as follows.

NO Model name Part name Before change After change Type of change

1
2
3
4

JX-9460/PS/9660/PS

5
6
7
8
9

JX-9460/PS, JX-9660/PS
JX-96MB1/MD1/MH1/AP1/

10

PS1/RS/AP2/PS2

Laser unit
Shield sheet A
Shield sheet B
Noise absorption sheet
PCU insulation sheet
Sheet holder cushion
Added core
Screws (3X8)
Cable band

Operation manual
(insertion)

DUNT-0056GC12
PSHEP0107GCZZ
PSHEP0108GCZZ

DUNT-0056GC16

PSHEP0133GCZZ
PSHEP0134GCZZ
PCUSU0004GCZZ
RCORF1020LCZZ
XEBSD30P08000
LBNDJ2003SCZZ

TINSZ0140GCZZ

Ferrite core added

Part discontinued

Part added (see below)

SHARP CORPORATION Printer and Scanner Division

1/3

Orange

C

1. Changes to the laser unit

Ferrite core

5. PCU insulation sheet

4. Noise absorption
sheet

6. Sheet holder
cushion

8. Additional
screws
(3X8)

7. Added core

9. Cable band added

10. The text below will be inserted into the operation manual.

2/3

Note: The operation manual of the U.K. version of the JX-9660 already contains the

information stated on the CE-Mark, and therefore it is not necessary to add it.