SHARP LPE192 Technical Report

Date: Jul. 5, 1994

LASER PRINTER: JX-9700

1. ADDITION OF HARNESS PROTECTIVE MYLAR A AND B

2. PARTS CODE CHANGES FOR POWER SUPPLY UNIT

3. ADDITION OF ADDENDUM SHEET FOR SOFT BAND
TECHNOLOGY EXPLANATION

1. Addition of harness protective mylar A and B

1.Model name: JX-9700, 9700E

2.General: Harness protective mylars A and B have been added to the unit as shown in the

diagram below. This is to prevent the plate edge from damaging the harness cable
when opening and closing the upper section of the unit.

No. : LPE-192

3.Description: Mount the harness protective mylars A and B as shown in the diagram below.

➀ Harness protective mylar A (PSHEP0109GCZZ)

View A

View B

0.5~1mm

➁ Harness protective mylar B

(PSHEP0110GCZZ)

SHARP CORPORATION Printer and Scanner Division

1/3

Orange

C