Date: Oct. 29, 1993
LASER PRINTER : JX-9600
1. CHANGE OF PRINTING ROLLER SPRING (FOR SERVICE PARTS)
2. CHANGE OF FAN MOTOR
3. ALTERATION OF PS CLUTCH AND CHANGE OF PERIPHERAL
HARNESS PROCESSING
No. : LPE-178
1. Change of printing roller spring (for service parts)
1.Model name: JX-9600, JX-9600PS (equipped with printer roller)
2.General: Due to the possibility of blurring on the driver side of the machine when printing solid
black, the tension of the printing roller spring has been changed.
3.Description:
Before After
Part name Printing roller SPA Printing roller SP AN
Part code MSPRC0079GCZZ MSPRC0079GCZ1
Fixed tension
Division Green
Printing roller spring: Change
(at 9 mm)
1,000g %
0
— 20
1,200g ±10%
4.Effective time:
SHARP CORPORATION Printer and Scanner Division
February, 1993.
1/4
Orange
C
2. Change of fan motor
1.Model name: JX-9400
2.General: The fan motor is being changed to increase productivity.
3.Effective time: October, 1993.
Fan motor to be changed.
RMOTN0012GCZ1
3. Alteration of PS clutch and change of peripheral harness processing
1.Model name: JX-9400, JX-9600, JX-9600PS
2.General: The shape of the PS clutch and the earth plate as well as peripheral harness
processing have been changed to improve lead edge alignment.
3.Description: • PS clutch shape change
Fastening area around the clutch Bend
2-3 mm away from the edge surface.
2~3mm
Before change After change
(PCLC-0006GCZZ) (PCLC-0006GCZ1)
2/4
• Add G-ring
Add G6 (PRNGP0019FCZZ)
PS clutch
PS roller
•Add harness holder sheet and change the shape of the frame earth plate
Add harness holder sheet (PSHEP0102GCZZ)
PS earth plate
Frame earth plate shape change
Bent part
Before change
Flatten out
After change
•Addition of binding band
Binding together the pin sensor, the PS clutch, the OPU harness with the
LBNDJZ003SCZZ binding band.
Binding with the binding band
4.Effective time: September, 1993.
PS clutch
Pin sensor
OPU
3/4
Ref.
Model
No.
JX-9600PS
1
JX-9600
2
JX-9400
JX-9400
3
JX-9600
JX-9600PS
<Interchange>
1. Interchangeable. 4. Not interchangeable.
2. C urr e nt t y pe c a n be u s ed i n p la ce of new t ype .
New ty pe cann ot be us ed i n place of curr ent type .
3. C urre nt ty pe cann ot be used i n place of new ty pe.
New t y pe c a n be u sed in p la c e of c u rr en t ty p e.
Parts marked with “ ” is important for maintaining the safety of the set. Be sure to replace these parts with
specified ones for maintaining the safety and performance of the set.
name
Version P/G No.
4 -17
3 -32
2 -41
All
2
2
2
!
Current parts New parts
Parts code Parts code
MSPRC0079GCZZ MSPRC0079GCZ1 AA
RMOTN0012GCZZ RMOTN0012GCZ1 AY Fan motor ’93/10 1
PCLC-0006GCZZ PCLC-0006GCZ1 AX PS clutch ’93/9 3
— PRNGP0019FCZZ AA G ring (G6) ’93/9 6
— PSHEP0102GCZZ AB
— LBNDJ2003SCZZ AA Binding band ’93/9 6
Price
rank
5. Interchangeable if replaced with same types of
relate d parts in use .
6. Others .
Parts name
Printing roller
spring
Harnessing
sheet
Effective
time
’93/2 3
’93/9 6
Interchangeability
Note
4/4
Loading...