Sharp LL-H1513 User Manual

Download

Page 1

LCD MONITOR MONITEUR LCD MONITOR LCD MONITOR LCD

 !"==== !

LL-H1513

OPERATION MANUAL MODE D’EMPLOI MANUAL DE FUNCIONAMIENTO MANUAL DE INSTRUÇÕES

 !"

Page 2

Table of Contents

Notice for Users in the USA . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4

TCO '95/ '99 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5

Notice for Users in Europe . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7

Notice for Users in the UK . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8

Notice for Users in Australia. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8

Tips and safety precautions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9

Product description . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10

Height adjustment, angle adjustment, rotation (long height/width) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11

Connecting the monitor and turning the monitor on and off . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12

Connecting the monitor to a computer . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13

Connect the accessory audio cable . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14

Connection of headphones (commercially available) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14

Connecting the monitor to a power source . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14

Connecting a USB device . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14

Turning the power on . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15

Changing between input terminals . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15

Turning the power off . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15

Adjusting the screen display and volume . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 16

Adjustment value reset . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 16

Adjustment lock function . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 16

Adjusting the backlight . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 16

Adjusting the volume . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 17

Confirmation of product information . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 17

Adjusting the screen display (When using a analog signal) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 18

Automatic screen adjustment . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 18

Manual screen adjustment . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 19

Adjusting the screen display (When using a digital signal) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 22

Monitor care and repair . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 24

Monitor care . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 24

Storage . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 24

Troubleshooting . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 24

Specifications . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 25

Installing set-up information and the ICC profile (For Windows) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 28

Information about the ColorSync profile (For MacOS) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 31

Instructions for attaching a VESA compliant arm . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 32

Information about the Pivot Software (Long height/width display) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 33

EnglishDeutschFrançaisItalianoEspañolEnglish

Page 3

Notice for Users in the USA

FCC Statement

WARNING – FCC Regulations state that any unauthorized changes or modifications to this equipment not expressly approved by the manufacturer could void the user's authority to operate this equipment.

Note: This equipment has been tested and found to comply with the limits for a Class B digital device

pursuant to Part 15 of the FCC Rules.

These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

- Reorient or relocate the receiving antenna.

- Increase the distance between the equipment and receiver.

- Connect the equipment into an outlet on a circuit different from that to which the receiver is

connected.

- Consult the dealer or an experienced radio/TV technician for help.

Use nothing but the included cables and AC cord to insure compliance with FCC regulation for Class B computing equipment.

Declaration of Conformity

SHARP LCD Color Monitor LL-H1513-H / LL-H1513-B

This device complies with part 15 of the FCC rules. Operation is subject to the following conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undersized operation.

Responsible Party : SHARP ELECTRONICS CORPORATION

Sharp Plaza, Mahwah, New Jersey 07430 TEL :1-800-BE-SHARP

* As an ENERGY STAR Partner, SHARP has determined that this product meets the ENERGY STAR

guidelines for energy efficiency.

This product utilizes tin-lead solder, and fluorescent lamp containing a small amount of mercury. Disposal of these materials may be regulated due to environmental considerations. For disposal or recycling information, please contact your local authorities or the Electronics Industries Alliance:www.eiae.org

Page 4

LL-H1513-B LL-H1513-H / LL-H1513-Z

Congratulations!

You have just purchased a TCO’95 or TCO’99 approved and labelled product! Your choice has provided you with a product developed for professional use. Your purchase has also contributed to reducing the burden on the environment and also to the further development of environmentally adapted electronics products. This product meets the requirements for the TCO’95 or TCO’99 scheme which provides for an international environmental and quality labelling of personal computers. The labelling scheme was developed as a joint effort by the TCO (The Swedish Confederation of Professional Employees), Svenska Naturskyddsforeningen (The Swedish Society for Nature Conservation), Statens Energimyndighet (The Swedish National Energy Administration) and SEMKO AB. The requirements cover a wide range of issues: environment, ergonomics, usability, reduction of electric and magnetic fields, energy consumption and electrical safety.

Why do we have environmentally labelled computers?

In many countries, environmental labelling has become an established method for encouraging the adaptation of goods and services to the environment. The main problem, as far as computers and other electronics equipment are concerned, is that environmentally harmful substances are used both in the products and during their manufacture. Since it is not so far possible to satisfactorily recycle the majority of electronics equipment, most of these potentially damaging substances sooner or later enter nature. There are also other characteristics of a computer, such as energy consumption levels, that are important from the viewpoints of both the work (internal) and natural (external) environments. Since all methods of electricity generation have a negative effect on the environment (e.g. acidic and climate-influencing emissions, radioactive waste), it is vital to save energy. Electronics equipment in offices is often left running continuously and thereby consumes a lot of energy.

EnglishDeutschFrançaisItalianoEspañolEnglish

What does the environmenal labelling involve?

The environmental demands has been developed by Svenska Naturskyddsforeningen (The Swedish Society for Nature Conservation). These demands impose restrictions on the presence and use of heavy metals, brominated and chlorinated flame retardants, CFCs (freons) and chlorinated solvents, among other things. The product must be prepared for recycling and the manufacturer is obliged to have an environmental policy which must be adhered to in each country where the company implements its operational policy. The energy requirements include a demand that the computer and/or display, after a certain period of inactivity, shall reduce its power consumption to a lower level in one or more stages. The length of time to reactivate the computer shall be reasonable for the user.

Below you will find a brief summary of the environmental requirements met by this product. The complete environmental criteria document may be ordered from:

TCO Development

SE-114 94 Stockholm, Sweden Fax: +46 8 782 92 07 Email (Internet): development@tco.se Current information regarding TCO’99 approved and labelled products may also be obtained via the Internet, using the address: http://www.tco-info.com/

Page 5

Environmental requirements

Flame retardants Flame retardants are present in printed circuit boards, cables, wires, casings and housings. Their purpose is to prevent, or at least to delay the spread of fire. Up to 30% of the plastic in a computer casing can consist of flame retardant substances. Most flame retardants contain bromine or chloride, and those flame retardants are chemically related to another group of environmental toxins, PCBs. Both the flame retardants containing bromine or chloride and the PCBs are suspected of giving rise to severe health effects, including reproductive damage in fish-eating birds and mammals, due to the bio-accumulative * processes. Flame retardants have been found in human blood and researchers fear that disturbances in foetus development may occur. The relevant TCO´95 and TCO’99 demand require that plastic components weighing more than 25 grams must not contain flame retardants with organically bound bromine or chlorine. Flame retardants are allowed in the printed circuit boards since no substitutes are available.

Cadmium **

Cadmium is present in rechargeable batteries and in the colour-generating layers of certain computer displays. Cadmium damages the nervous system and is toxic in high doses. TCO’95 requirement states that batteries may not contain more than 25 ppm (parts per million) of cadmium. The colour-generating layers of display screens must not contain any cadmium. The relevant TCO’99 requirement states that batteries, the colour-generating layers of display screens and the electrical or electronics components must not contain any cadmium.

Mercury **

Mercury is sometimes found in batteries, relays and switches. It damages the nervous system and is toxic in high doses. TCO’95 requirement states that batteries may not contain more than 25 ppm (parts per million) of mercury. The relevant TCO’99 requirement states that batteries may not contain any mercury. Both TCO´95 and TCO´99 also demand that mercury is not present in any of the electrical or electronics components associated with the labelled unit. There is however one exception. Mercury is, for the time being, permitted in the back light system of flat panel monitors as there today is no commercially available alternative. TCO aims on removing this exception when a mercury free alternative is available.

CFCs (freons)

The relevant TCO’95 and TCO’99 requirement state that neither CFCs nor HCFCs may be used during the manufacture and assembly of the product. CFCs (freons) are sometimes used for washing printed circuit boards. CFCs break down ozone and thereby damage the ozone layer in the stratosphere, causing increased reception on earth of ultraviolet light with e.g. increased risks of skin cancer (malignant melanoma) as a consequence.

Lead **

Lead can be found in picture tubes, display screens, solders and capacitors. Lead damages the nervous system and in higher doses, causes lead poisoning. The relevant TCO’95 and TCO´99 requirement permit the inclusion of lead since no replacement has yet been developed.

* Bio-accumulative is defined as substances which accumulate within living organisms

** Lead, Cadmium and Mercury are heavy metals which are Bio-accumulative.

Page 6

Notice for Users in Europe

This equipment complies with the requirements of Directives 89/336/EEC and 73/23/EEC as amended by 93/68/EEC.

Dieses Gerät entspricht den Anforderungen der EG-Richtlinien 89/336/EWG und 73/23/EWG mit Änderung 93/68/EWG.

Ce matériel répond aux exigences contenues dans les directives 89/336/CEE et 73/23/CEE modifiées par la directive 93/68/CEE.

Dit apparaat voldoet aan de eisen van de richtlijnen 89/336/EEG en 73/23/EEG, gewijzigd door 93/68/ EEG.

Dette udstyr overholder kravene i direktiv nr. 89/336/EEC og 73/23/EEC med tillæg nr. 93/68/EEC.

Quest' apparecchio è conforme ai requisiti delle direttive 89/336/EEC e 73/23/EEC, come emendata dalla direttiva 93/68/EEC.

Η εγκατασταση ανταποκρινεται στιζ απαιτησειζ των οδηγιων τηζ Ευρωπαïκηζ Ενωσηζ 89/336/ΕΟΚ κατ 73/23/ΕΟΚ, óπωζ οι κανονισµοι αυτοι συµπληρωθηκαν απó την οδηγια 93/68/ΕΟΚ.

Este equipamento obedece às exigências das directivas 89/336/CEE e 73/23/CEE, na sua versão corrigida pela directiva 93/68/CEE.

Este aparato satisface las exigencias de las Directivas 89/336/CEE y 73/23/CEE, modificadas por medio de la 93/68/CEE.

EnglishDeutschFrançaisItalianoEspañolEnglish

Denna utrustning uppfyller kraven enligt riktlinjerna 89/336/EEC och 73/23/EEC så som komplette ras av 93/68/EEC.

Dette produktet oppfyller betingelsene i direktivene 89/336/EEC og 73/23/EEC i endringen 93/68/EEC.

Tämä laite täyttää direktiivien 89/336/EEC ja 73/23/EEC vaatimukset, joita on muutettu direktiivillä 93/ 68/EEC.

CAUTION :

TO PREVENT ELECTRICAL SHOCK, DISCONNECT THE AC CORD BEFORE SERVICING.

CAUTION :

FOR A COMPLETE ELECTRICAL DISCONNECTION, PULL OUT THE MAIN PLUG.

VORSICHT :

UM DIE STROMZUFUHR VOLLSTÄNDIG ZU UNTERBRECHEN, DEN NETZSTECKER HERAUSZIEHEN ENTFERNEN.

ATTENTION :

POUR UN ARRET TOTAL DE L’APPAREIL, DEBRANCHEZ LA PRISE DU COURANT SECTEUR.

VARNING :

FÖR TOTAL ELEKTRISK URKOPPLING, KOPPLA UR KONTAKTEN OCH.

PRECAUCION :

PARA UNA COMPLETA DESCONEXION ELECTRICA DESENCHUFE LA CLAVIJA DE LA RED.

Page 7

Notice for Users in the UK

FOR CUSTOMERS IN U.K.

IMPORTANT

The wires in this mains lead are coloured in accordance with the following code :

GREEN-AND-YELLOW : Earth BLUE : Neutral BROWN : Live

As the colours of the wires in the mains lead of this apparatus may not correspond with the coloured markings identifying the terminals in your plug proceed as follows. The wire which is coloured GREEN-AND-YELLOW must be connected to the terminal in the plug which is marked by the letter E or by the safety earth or coloured green or green-and-yellow. The wire which is coloured BLUE must be connected to the terminal which is marked with the letter N or coloured black. The wire which is coloured BROWN must be connected to the terminal which is marked with the letter L or coloured red. Ensure that your equipment is connected correctly-if you are in any doubt consult a qualified electrician.

"WARNING :THIS APPARATUS MUST BE EARTHED"

Notice for Users in Australia

Service Inquiries

Please contact your dealer for service if required or contact Sharp Corporation of Australia on 1 300 13 50 22 for referral to your nearest Sharp authorized Service Center.

Page 8

Tips and safety precautions

- The LCD module built in this LCD Monitor is

manufactured with highly precise technology. However bright pixels or blank pixels may appear constantly. Also an irregular color and brightness may appear depending on view angle. Please note that these phenomena are common for liquid crystal monitor and are not a malfunction.

- Do not leave the screen displaying idly for long

periods of time, as this could cause afterimage to remain.

- If the brightness is adjusted to the minimum

setting it may be difficult to see the screen.

- The quality of the computer signal may influence

the quality of the display. We recommend using a computer able to emit high quality video signals.

- Never rub or tap the monitor with hard objects.

- Please understand that Sharp Corporation bears

no responsibility for errors made during use by the customer or a third party, nor for any other malfunctions or damage to this product arising during use, except where indemnity liability is recognized under law.

- This monitor and its accessories may be

upgraded without advance notice.

Location

- Do not use the monitor where ventilation is poor,

where there is a lot of dust, where humidity is high, or where the monitor may come into contact with oil or steam, as this could lead to fire.

- Ensure that the monitor does not come into

contact with water or other fluids. Ensure that no objects such as paper clips or pins enter the monitor as this could lead to fire or electric shock.

- Do not place the monitor on top of unstable

objects or in unsafe places. Do not allow the monitor to come into contact with strong shocks or vibrations. Causing the monitor to fall or topple over may damage it.

- Do not use in places where the monitor will be

subject to direct sunlight, near heating equipment or anywhere else where there is likelihood of high temperature, as this may lead to generation of excessive heat and outbreak of fire.

- When carrying the monitor, firmly grasp both the

display and stand section.If the monitor is lifted by the display only, the stand may abruptly pop out or move, and this could lead to injury. If the monitor is inclined, the stand may move and cause injury.

- Be careful not to allow your fingers to be

pinched between the display and stand. (Especially in the area of attachment.)

The Power Cord

- Do not damage the power cord nor place heavy

objects on it, stretch it or overly bend it. Also, do not add extension cords. Damage to the cord may result in fire or electric shock.

- Insert the power plug directly into the AC outlet. Adding an extension cord may lead to fire as a result of overheating.

Monitor and accessory checklist

- Please check that the following items are

included in the package.

- LCD monitor (1)

- Analog signal cable (1)

(model name: QCNW-1041MPZZ)

- Audio cable (1)

(model name: QCNW-1068MPZZ)

- USB cable (1)

(model name: QCNW-1071MPZZ)

- CD-ROM (1)

- Cleaning cloth (1)

- Operation manual (1)

Notes:

- The digital signal cable (DVI-D24 pin – DVI-D24

pin) is to be purchased separately. (model name: NL-C01E)

- The analog signal cable (DVI-I29 pin – D-sub 15 pin) is to be purchased separately. (model name: NL-C02E)

- You are advised to retain the carton in case the monitor needs to be transported.

- Sharp Corporation holds authorship rights to the Utility Disk program. Do not reproduce it without permission.

- The shape of the supplied accessaries may not be exactly same as shown in this booklet.

Manual Scope

- In this booklet, Microsoft Windows XP will be

referred to as [WindowsXP], Microsoft Windows Millenium as [WindowsMe], Microsoft Windows 2000 as [Windows2000], Microsoft Windows 98 as [Windows98], Microsoft Windows 95 as [Windows95], and Microsoft Windows Version 3.1 as [Windows3.1]. When there is no need to distinguish between programs, the term [Windows] will be used.

- Microsoft and Windows are registered trademarks of Microsoft Corporation.

- Macintosh is a registered trademark of Apple Computer, Inc.

EnglishDeutschFrançaisItalianoEspañolEnglish

Page 9

Product description

1. INPUT button

To switch between the signal’s input terminals. (Analogue RGB input terminal ↔ DVI-I input terminal)

2. MENU button

This button is used to pop-up, select and close the OSD (On Screen Display) Menu.

3. SELECT button

This button is used to select menu options when the OSD Menu is displayed.

4. buttons

When the OSD Menu is displayed:

These buttons are used to increase or decrease the value of a selected option.

When the OSD Menu is not displayed:

These buttons are used to adjust volume and backlight brightness .

5. Power button

6. Power LED

This LED is lit green when in use and orange when in power-saving mode.

7. DVI-I input terminal

The computer’s digital RGB output terminal or analogue RGB output terminal can be connected here. For a digital signal input, it can be connected to a computer with a DVI-compatible output terminal (DVI-D24 pin or DVI-I29 pin) and which has XGA output ability. (Depending on the computer to be connected, correct display may or may not be possible.) Separately sold cables are necessary for connection.

To connect to a digital RGB output terminal: Digital signal cable (model name: NL-C01E) To connect to an analog RGB output terminal: Analog signal cable (model name: NL-C02E)

8. Analog RGB input terminal

The analog signal cable is connected here.The analog signal cable included should be used.

9. USB port (downstream: 2 ports, upstream: 1 port)

10. Audio input terminal

A computer’s audio output terminal can be connected here. The audio cable included should be used.

11. Security lock anchor

By connecting a security lock (commercially available) to the security lock anchor, the monitor is fixed so that it cannot be transported. The security slot works in conjunction with Kensington Micro Saver Security Systems.

12. Power terminal

13. Headphone terminal

Headphones (commercially available) can be connected here.

14. Main power switch

15. Ventilation openings

Note: Never block the ventilation openings as this may lead to overheating inside the monitor and result in malfunction.

811

Page 10

Height adjustment, angle adjustment, rotation

(long height/width)

CAUTION!

- Pressure from hands on the LCD panel could

cause damage.

- Be careful not to allow your fingers to be pinched.

Height adjustment

Adjust to an easy to view height.

60mm

Angle adjustment

Adjust to an easy to view angle.

Rotation (long height/width)

The display can be rotated for a long height or width to suit the displayed content.

- Before rotating, move the display to its uppermost position. If the display is rotated while it is set low, it will contact the stand and could lead to damage.

- The display can only be rotated through a range of 90°. Applying excessive force may cause malfunction.

- Do not apply excessive force when the cable is connected.

To set to long height

Gently turn in the clockwise direction (to 90°).

EnglishDeutschFrançaisItalianoEspañolEnglish

To set to long width

Gently turn in the counterclockwise direction (to 90°).

Note:

- The orientation of the display can be changed using Pivot Software. (p. 33)

Page 11

Connecting the monitor and turning the monitor on and off

CAUTION!

- When connecting, ensure that both the monitor

and computer are switched off.

- Be careful not to overly bend the cable or add extension cords as this could lead to a malfunction.

Cable storage

If necessary, excess cable can be housed in the stand.

1.Remove the cover. Gently pull the top of the cover towards yourself.

3.Refit the cover. Be careful not to pinch the cable.

- If the cover is hard to refit, do not force it.

Check whether cables are trapped.

CAUTION!

- If the display is to be rotated, first house the cable, and then check while gently turning the display. If it cannot be turned, rehouse the cable with sufficient slack. (If there is insufficient cable length, rotation will be impossible. Forcing rotation may cause cable disconnection.)

2.Run cable along the back of the stand.

- If the display is to be rotated, first house the cables with the display in the long height position, so there is sufficient length when the display is turned.

Page 12

Connecting the monitor and turning the monitor on and off

Connecting the monitor to a computer

Connecting using accessory analog signal cable

Connect the accessory analog signal cable to the analog RGB input terminal of the display, and the analog RGB output terminal of the computer.

Analog RGB input terminal

Analog signal cable

- Paying attention to connector direction, firmly insert the signal cable to terminal, and then tighten the screws at both sides.

Analog RGB output terminal

Connecting using a separately sold display cable

The separately sold display cable enables connection between the DVI-I input terminal on the display and the digital or analog RGB output terminal of the computer.

When connecting to a digital RGB output terminal:

- Use a digital signal cable (model name: NLC01E).

- For a digital signal input, it can be connected to a computer with a DVI-compatible output terminal (DVI-D24 pin or DVI-I29 pin) and which has XGA output ability. (Depending on the computer to be connected, correct display may or may not be possible.)

When connecting to an analog RGB output terminal:

- Use an analog signal cable (model name: NLC02E).

DVI-I input terminal

EnglishDeutschFrançaisItalianoEspañolEnglish

If connecting to a D-sub 15 pin 2 row Apple Power Macintosh, attach a Macintosh conversion adapter (commercially available) to the analog signal cable.

Macintosh conversion adapter

Display cable

RGB output terminal

(purchased separately)

- Paying attention to connector direction, firmly

insert the signal cable to terminal, and then tighten the screws at both sides.

Set the monitor as follows when establishing a digital connection with a Power Mac using an ADC-DVI adapter made by Belkin. (Operation has been checked with the Power Mac G4 M7627J/A)

- Perform settings with the Power Mac power supply off.

- The setup screen automatically disappears approximately 30 seconds after the last command.

1.After connecting the power cord, turn on the monitor’s main power.

Page 13

Connecting the monitor and turning the monitor on and off

2.Press the button and button simultaneously, and while doing this press the POWER button (i.e. turn the power on).

MAC DIGITAL

INPUT-2

3.Set to [ON] with the buttons.

- Do not set to [ON] if you are not using a Belkin

ADC-DVI adapter, as this may result in incorrect display.

4.Press the MENU button. This completes setting.

OFF

OK [ MENU ]

Connect the accessory audio cable

Audio input terminal

Connecting the monitor to a power source

Power terminal

AC outlet

Power cord

Connecting a USB device

This monitor is equipped with a USB standard (Rev. 1.1) self-powered hub.

Downstream (2 ports)

Each of these ports enables connection of a USB device with working current up to 500 mA.

Upstream (1 port)

This enables connection of a USB compatible computer or USB hub.

Audio cable

- If you plan to use a commercially available

cable, obtain one with no resistance.

Audio output terminal

Connection of headphones (commercially available)

Headphones (commercially available) can be connected.

Headphone terminal

Headphones

Notes:

- If a USB cable is required, please use the one

included.

- Before connecting, ensure that the shape of the USB cable connector is correct.

- For information regarding the USB function (such as set-up) please refer to the operation manual of the computer to be connected.

- Some computers, OS and other devices may not be able to be activated. To ascertain a certain device's USB compatibility, please contact the manufacturer of the device.

Downstream

Upstream

USB cable

Page 14

Connecting the monitor and turning the monitor on and off

Turning the power on

1.Turn on the main power of the monitor.

Main power switch

- When switching the main power switch on and off, always wait for an interval of at least 5 seconds. Rapid switching may result in malfunction.

2.Press the monitor's POWER button. The power LED will light up orange.

3.Turn on the computer.

Changing between input terminals

Use the INPUT button to switch between signal input terminals.

Analog RGB input terminal

INPUT-1

INPUT

DVI-I input terminal

(digital)

INPUT-2

DVI-I input terminal

(analog)

INPUT-2

Turning the power off

EnglishDeutschFrançaisItalianoEspañolEnglish

Turn on the

Press power button

When a signal is input from the computer, the power LED lights up green, and the screen is displayed (After power is turned on, it may take a little time until the screen is displayed.)

- If the input terminal to which the computer is

connected has not been selected, the screen will not be displayed. If necessary, perform input terminal switching.

Notes: (when using an analog signal)

- If using the monitor for the first time or after

having changed the system settings during use, perform an automatic screen adjustment (p. 18).

- When connecting to a notebook, if the notebook computer's screen is set so that it is displaying at the same time, the MS-DOS screen may not be able to display properly. In this case, change the settings so that only the monitor is displaying.

computer

1. Turn the computer off.

2. Press the monitor's POWER button. The Power LED will disappear.

Turn the computer off

If the monitor will not be used for a long time, turn off the main power switch of the monitor, and remove the power plug from the outlet.

Press power button

Page 15

Adjusting the screen display and volume

For analog signal

1.First perform an automatic adjustment. (p. 18)

2.Perform manual adjustment where necessary. (p. 19)

For digital signal

The monitor can generally be used without adjustment. If necessary perform manual adjustment. (p. 22)

Note:

- All adjustments will be saved even after turning

the power off.

Adjustment value reset

Resetting all adjustment values

All adjustment values can be returned to their original ex-factory values in one command.

1.Turn off the monitor power.

2.Press the MENU button and the SELECT button simultaneously, and while doing this press the power button (i.e. turn the power on). Continue to press the button until [ALL RESET] appears on the screen. Reset is complete when the displayed message disappears.

Adjustment lock function

By disabling the control buttons (i.e. setting the lock) any attempted changes to adjusted values will be voided.

1.Turn off the monitor power.

2.While pressing the MENU button, press the power button (i.e. turn the power on). Continue to press the button until [ LOCKED when the message is displayed.

Note:

- When the lock is in place, all buttons other than

the power button are disabled.

] appears on the screen. The lock is set

ADJUSTMENT

Adjustment lock release

1.Turn off the monitor power.

2.While pressing the MENU button, press the power button (i.e. turn the power on). Continue to press the button until [ UNLOCKED released when the message is displayed.

] appears on the screen. The lock is

ADJUSTMENT

Adjusting the backlight

Notes:

- While ALL RESET is displayed, the control

buttons are disabled.

- It is not possible to reset values when the adjustment lock is in place. Remove the adjustment lock before attempting to operate control buttons.

ADJUSTMENT menu reset

The adjustment values of the analogue signal time’s ADJUSTMENT menu can be returned to their original ex-factory values.

1.Turn on the monitor power.

2.Press the MENU button and the button simultaneously. When [RESET] appears on the screen, the reset is complete.

Note:

- It is not possible to reset values when the

adjustment lock is in place. Remove the adjustment lock before attempting to operate control buttons.

Carry out the commands without the On Screen Display (OSD) Menu displayed. If the OSD Menu is displayed, press the MENU button (several times may be required) and begin when the OSD Menu has disappeared.

1.Without the OSD Menu being displayed, push the or the button.

VOLUME

BRIGHT

2.Check that [BRIGHT] is selected.

If it is not selected, press the SELECT button and select [BRIGHT] .

3. Adjust by pressing the button (darker) or

button (lighter).

Note:

- On Screen display for adjustment disappears

several seconds after the last operation.

11 31

SELECT [ SELECT ]

Page 16

Adjusting the screen display and volume

Adjusting the volume

1.Without the OSD Menu being displayed, push the or the button.

VOLUME

BRIGHT

2.Check that [VOLUME] is selected.

If it is not selected, press the SELECT button and select [VOLUME].

3. Adjust by pressing the button (decrease) or

button (increase).

Note:

- On Screen display for adjustment disappears

several seconds after the last operation.

11 31

SELECT [ SELECT ]

EnglishDeutschFrançaisItalianoEspañolEnglish

Confirmation of product information

1. Turn off the monitor power.

2. Press the SELECT button and the

simultaneously, and while doing this press the power button (i.e. turn the power on).

3.Confirmation finished: MENU button.

Note:

- [USAGE TIME] will not be set to [0] due to the

delivery inspection time at factories, etc.

button

Page 17

Adjusting the screen display (When using an analog signal)

Automatic screen adjustment

Options in the ADJUSTMENT Menu can be adjusted automatically (CLOCK, PHASE, H-POS VPOS).

Note:

- When setting up this monitor for the first time or

after having changed an aspect of the current system, perform an automatic screen adjustment before use.

On Screen Display for the automatic adjustment

First display an image that makes the entire screen light. If you are using Windows, you can use the Adjustment Pattern on the accompanying CDROM.

Opening the Adjustment Pattern (for Windows)

This explanation is for Windows 95/98/2000/Me/ XP, and assumes that the CD-ROM drive is "D drive".

1.Place the CD-ROM (provided) into the

computer’s D drive.

2.Open [My Computer] and select CD-ROM. If

using Windows 3.1, open [File Manager] and choose D drive.

3.Double click on [Adj_uty.exe] to run the

Adjustment Program. The Adjustment Pattern will appear.

Adjustment pattern

After completing the adjustments, press the computer’s [Esc] key to exit the Adjustment Program.

How to Adjust

1.Press the MENU button. The ADJUSTMENT Menu will be displayed.

ADJUSTMENT

MANUAL AUTO

CLOCK PHASE H-POS V-POS

INPUT-1 ANALOG 1024 x 768 V : 60Hz H : 48.4kHz

101

60 24

2.Press the button. The screen will become dark and [ADJUSTING] will be displayed. After a few seconds the ADJUSTMENT Menu will return. (The automatic adjustment is now complete.)

3.Press the MENU button 4 times to make the OSD Menu disappear.

Notes:

- In most cases automatic adjustment is sufficient.

- It may not be possible to achieve correct

adjustment with the first automatic adjustment. In such a case, try repeating automatic adjustment 2 or 3 times.

- If necessary due to any of the following, manual adjustments (p. 19) can be performed after the automatic adjustment.

- When further fine adjustment is needed.

- When the computer’s video input signals are

Composite Sync or Sync On Green. (Automatic adjustments may not be possible.)

- When [OUT OF ADJUST] is displayed. (When

the screen displays an entirely dark image, the automatic screen adjustment may be disabled. When making an automatic adjustment, be sure to either use the Adjustment Pattern or try displaying an image that makes the entire screen very bright.)

- Automatic adjustment may not be achieved correctly depending on what is displayed on the screen - moving pictures or the MS-DOS prompt etc.

Note:

- If your computer’s display mode is set to 65K

colors, you may see the different color levels in each color pattern or the gray scale may look colored. (This is due to the specification of the input signal and is not a malfunction.)

Page 18

Adjusting the screen display (When using an analog signal)

Manual screen adjustment

Adjustments can be made using On Screen Display (OSD) Menu provided.

On Screen Display for adjustment

If you are using Windows, open the Adjustment Pattern on the accompanying CD-ROM. (p. 18) If your system is not Windows, you can not use the Adjustment Pattern. Therefore display an image that makes the entire screen light and adjust it through checking visually its actual tone. This chapter provides the procedure how to adjust the screen by using Adjustment Pattern (for Windows)

How to adjust

1.Press the MENU button. The ADJUSTMENT Menu will be displayed.

ADJUSTMENT

MANUAL AUTO

CLOCK PHASE H-POS V-POS

INPUT-1 ANALOG 1024 x 768 V : 60Hz H : 48.4kHz

At this point relevant menu options can be adjusted. Each time the MENU button is pressed the next menu is selected. (ADJUSTMENT → GAIN CONTROL → COLOR CONTROL → MODE SELECT → OSD Menu disappears)

Note:

- The OSD Menu automatically disappears

approximately 30 seconds after the last command.

101

60 24

ADJUSTMENT Menu

ADJUSTMENT

MANUAL AUTO

CLOCK PHASE H-POS V-POS

INPUT-1 ANALOG 1024 x 768 V : 60Hz H : 48.4kHz

101

60 24

MANUAL: Individual menu options are manually

adjusted.

AUTO: Every menu option is automatically

adjusted.

Notes:

- Press the

button to select [AUTO].

- To choose a menu option: SELECT button

- To go to the next menu: MENU button

CLOCK

The figure below demonstrates how to adjust so that vertical flicker noise is not emitted. (

buttons)

Vertical flicker noise

PHASE

The figure below demonstrates how to adjust so that horizontal flicker noise is not emitted. (

buttons)

Note:

- Adjustments to PHASE should be made only

after CLOCK has been correctly set.

EnglishDeutschFrançaisItalianoEspañolEnglish

Horizontal flicker noise

H-POS (horizontal positioning) and V-POS (vertical positioning)

To center the screen image within the boundaries of the screen, adjust the left-right (H-POS) values

and the up-down (V-POS) values. ( buttons)

Screen frame

Page 19

Adjusting the screen display (When using an analog signal)

GAIN CONTROL Menu

GAIN CONTROL

MANUAL AUTO

BLACK LEVEL CONTRAST

INPUT-1 ANALOG 1024 x 768 V : 60Hz H : 48.4kHz

50 18

MANUAL: Individual menu options are manually

adjusted.

AUTO: Every menu option is automatically

adjusted using the Auto Gain Control* function.

Notes:

- Press the

button to select [AUTO].

- To choose a menu option: SELECT button

- To go to the next menu: MENU button

* Auto Gain Control function

- The Auto Gain Control adjusts contrast and black

level based on the brightest color of the image displayed. Unless an Adjustment Pattern is used, automatic adjustment may not be possible. In such a case, either use an Adjustment Pattern, or adjust manually.

- If the signal coming from the computer is composite sync or sync on green, automatic adjustment cannot be performed. Please perform manual adjustment instead.

BLACK LEVEL

Total screen brightness can be adjusted while watching the color pattern. ( buttons)

Color pattern

COLOR CONTROL Menu

COLOR CONTROL

sRGB WHITE BALANCE HUE SATURATION

INPUT-1 ANALOG 1024 x 768 V : 60Hz H : 48.4kHz

STD VIVIDCOLOR MODE

0 0

Notes:

- To choose a menu option: SELECT button

- To go to the next menu: MENU button

COLOR MODE

Color tone can be set as below.

sRGB : sRGB is international standard of color

representation specified by IEC (International Electrotechnical Commission). Color conversion is made in taking account of liquid crystal’s characteristics and represents color tone close to it original image.

STD : Displays image with the color tone

results from original scheme of liquid crystal panel.

VIVID : Displays an image with dynamic and

VIVID primary colors.

- If [sRGB] or [VIVID] has been selected, items subsequent to [WHITE BALANCE] cannot be set.

Subsequent items can be set when the [COLOR MODE] is [STD].

WHITE BALANCE

After selecting [WHITE BALANCE], press the button and display the adjustment menu.

WHITE BALANCE

COOL WARM USERSTD

R-CONTRAST G-CONTRAST B-CONTRAST

CONTRAST

While watching the color pattern, adjustments can be made so that all graduations appear.

( buttons)

OK [ MENU ]

Notes:

- On settings other than [STD] not all graduations

can be displayed. To display all graduations, set to [STD].

- Use the buttons to select [COOL], [·], [STD], [·], [WARM] or [USER].

- Selecting USER will display the setting values for [R-CONTRAST], [G-CONTRAST] and [BCONTRAST], in order to make fine adjustments.

- Use the SELECT button to select [R-CONTRAST], [G-CONTRAST] and [B-CONTRAST].

- When adjustment complete: MENU button

Page 20

Adjusting the screen display (When using an analog signal)

COOL ... Color tone bluer than standard

• .......... Color tone slightly bluer than standard

STD ......Color tone standard setting

• .......... Color tone slightly redder than standard

WARM .. Color tone redder than standard USER

R-CONTRAST ..... button for blue-green

button for red

G-CONTRAST .....

button for purple button for green

B-CONTRAST .....

button for yellow button for blue

HUE

Hue can be adjusted. (

buttons)

SATURATION

Color saturation can be adjusted. ( buttons) At the minimum value, the screen is black and white.

MODE SELECT Menu

MODE SELECT

INFORMATION

OSD LANGUAGE SCALING 400 LINES

INPUT-1 ANALOG 1024 x 768 V : 60Hz H : 48.4kHz

640 720

Notes:

- Depending on the resolution of the input signal,

even if menu options can be selected, the display may not change.

- To choose a menu option: SELECT button

- When adjustment complete: MENU button

INFORMATION

A model name, a serial number, and usage time can be checked. After selecting [INFORMATION],

press the

button.

(When adjustment complete: MENU button)

OSD

After selecting [OSD], press the button. (When adjustment complete: MENU button)

OSD H-POSITION:

The position of the OSD display can be moved to the left and right. ( buttons)

OSD V-POSITION:

The position of the OSD display can be moved up and down. ( buttons)

OSD PIVOT:

The orientation of the OSD display can be changed.( buttons)

ON .....Orientation for long height display

OFF .... Orientation for long width display

The operating functions of the and buttons in the ADJUSTMENT menu are transposed when the OSD-PIVOT function is switched from [ON] to [OFF].

LANGUAGE

Messages displayed on the screen and OSD Menu contents can be changed to the following languages.

English, German, French, Dutch, Spanish, Italian, Swedish

1.After selecting [LANGUAGE], press the

button. The Language Selection Menu will be displayed on the screen.

2.Select the desired language using the SELECT button.

3.Press the MENU button. The Language Selection Menu disappears.

SCALING (Level of scaling)

Adjusts the image to optimum sharpness when Screen expansion is taken. ( buttons)

400 LINES (degree of resolution)

You can specify the horizontal resolution of a 400line screen when using US text, etc. ( buttons)

640: 640 X 400 dot mode 720: 720 X 400 dot mode (US text etc.)

EnglishDeutschFrançaisItalianoEspañolEnglish

Note:

- As the resolution input for other than 400 lines is

done automatically, there is no need to set it.

Page 21

Adjusting the screen display (When using a digital signal)

Adjustments can be made using On Screen Display (OSD) Menu provided.

On Screen Display for adjustment

How to adjust

1.Press the MENU button. The COLOR CONTROL Menu will be displayed.

COLOR CONTROL

sRGB WHITE BALANCE HUE SATURATION

INPUT-2 DIGITAL 1024 x 768 V : 60Hz H : 48.4kHz

STD VIVIDCOLOR MODE

0 0

At this point relevant menu options can be adjusted. Each time the MENU button is pressed the next menu is selected. (COLOR CONTROL → MODE SELECT → OSD Menu disappears)

Notes:

- The OSD Menu automatically disappears

approximately 30 seconds after the last command.

COLOR CONTROL Menu

COLOR CONTROL

sRGB WHITE BALANCE HUE SATURATION

INPUT-2 DIGITAL 1024 x 768 V : 60Hz H : 48.4kHz

STD VIVIDCOLOR MODE

0 0

Notes:

- To choose a menu option: SELECT button

- To go to the next menu: MENU button

COLOR MODE

Color tone can be set as below.

sRGB : sRGB is international standard of color

STD : Displays image with the color tone

results from original scheme of liquid crystal panel.

VIVID : Displays an image with dynamic and

VIVID primary colors.

- If [sRGB] or [VIVID] has been selected, items subsequent to [WHITE BALANCE] cannot be set.

Subsequent items can be set when the [COLOR MODE] is [STD].

WHITE BALANCE

After selecting [WHITE BALANCE], press the button and display the adjustment menu.

WHITE BALANCE

COOL WARM USERSTD

R-CONTRAST G-CONTRAST B-CONTRAST

OK [ MENU ]

Notes:

- On settings other than [STD] not all graduations

can be displayed. To display all graduations, set to [STD].

- Use the buttons to select [COOL], [·], [STD], [·], [WARM] or [USER].

- Selecting USER will display the setting values for [R-CONTRAST], [G-CONTRAST] and [BCONTRAST], in order to make fine adjustments.

- Use the SELECT button to select [R-CONTRAST], [G-CONTRAST] and [B-CONTRAST].

- When adjustment complete: MENU button

Page 22

Adjusting the screen display (When using a digital signal)

COOL ... Color tone bluer than standard

• .........Color tone slightly bluer than standard

STD ......Color tone standard setting

• ......... Color tone slightly redder than standard

WARM .. Color tone redder than standard USER

R-CONTRAST ..... button for blue-green

button for red

G-CONTRAST .....

button for purple button for green

B-CONTRAST .....

button for yellow button for blue

HUE

Hue can be adjusted. (

buttons)

SATURATION

Color saturation can be adjusted. ( buttons) At the minimum value, the screen is black and white.

MODE SELECT Menu

MODE SELECT

INFORMATION

OSD LANGUAGE SCALING

INPUT-2 DIGITAL 1024 x 768 V : 60Hz H : 48.4kHz

Notes:

- Depending on the resolution of the input signal,

even if menu options can be selected, the display may not change.

- To choose a menu option: SELECT button

- When adjustment complete: MENU button

INFORMATION

A model name, a serial number, and usage time can be checked. After selecting [INFORMATION],

press the

button.

(When adjustment complete: MENU button)

OSD

After selecting [OSD], press the button. (When adjustment complete: MENU button)

OSD H-POSITION:

The position of the OSD display can be moved to the left and right. ( buttons)

OSD V-POSITION:

The position of the OSD display can be moved up and down. ( buttons)

OSD PIVOT:

The orientation of the OSD display can be changed.( buttons)

ON .....Orientation for long height display

OFF .... Orientation for long width display

The operating functions of the and buttons in the ADJUSTMENT menu are transposed when the OSD-PIVOT function is switched from [ON] to [OFF].

LANGUAGE

Messages displayed on the screen and OSD Menu contents can be changed to the following languages.

English, German, French, Dutch, Spanish, Italian, Swedish

1.After selecting [LANGUAGE], press the

button. The Language Selection Menu will be displayed on the screen.

2.Select the desired language using the SELECT button.

3.Press the MENU button. The Language Selection Menu disappears.

SCALING (Level of scaling)

Adjusts the image to optimum sharpness when Screen expansion is taken. ( buttons)

EnglishDeutschFrançaisItalianoEspañolEnglish

Page 23

Monitor care and repair

Monitor care

Always remove the plug from the AC outlet when cleaning the monitor.

Cabinet and control panel section

Use a soft dry cloth to lightly wipe away any grime from the cabinet and control panel. If they are very dirty, apply neutral detergent to a dampened soft cloth, wring it out well and wipe away grime.

LCD panel section

Use a soft dry cloth to lightly wipe away dirt and dust from the surface of the LCD panel. (A soft cloth such as gauze or that used for lens cleaning is suitable.)

CAUTION!

- Never use thinner, benzine, alcohol, glass

cleaner, etc, as this could lead to color change or change in shape.

- Never scratch the monitor with anything hard or apply strong pressure as this could leave marks or result in malfunction.

Storage

If the monitor will not be used for a long period of time, be sure to remove the power plug from the AC outlet.

CAUTION!

Do not leave the monitor in contact with rubber or plastic items for long periods of time as this could lead to color change or change in shape.

Troubleshooting

If you think the monitor may be faulty, please check the following points before taking it to be repaired. If afterwards it still does not work, please contact the shop where you purchased the monitor or your nearest Sharp authorized Service Center.

The monitor's florescent tubes have a limited life span.

- If the screen darkens, persistently flickers or does not light up, it may be necessary to replace the florescent tube unit. Please inquire at the shop where you purchased the monitor or your nearest Sharp authorized Service Center. (Never attempt this replacement on your own.)

- In the initial period of use, due to the characteristics of florescent tubes the screen may flicker. (This is not a malfunction.) Should this happen, check by first turning off the power, then turning it on again.

No image appears on the monitor (Power LED is not lit)

- Is the power cord connected properly? (p. 14)

No image appears on the monitor (Power LED is

lit)

- Is the computer connected properly? (p. 13)

- Is the computer turned on?

- Is the signal’s input terminal switched to the

correct one? (p. 15)

- Does the computer's signal timing correspond to monitor specifications? (p. 26)

- Is the computer in power-saving mode?

Control buttons do not work

- Is the adjustment lock on? (p. 16)

The image appears distorted

- Does the computer's signal timing correspond to

monitor specifications? (p. 26)

- If you are using the analog signal, perform automatic adjustment. (p. 18)

- If you can change the frequency on the computer you are using, change the values to a low frequency count.

No sound can be heard from the headphones

- Is the audio cable connected properly? (p. 14)

- Are the headphones connected properly? (p. 14)

- Perform the volume adjustment procedure.(p. 17)

- When the monitor is in power saving mode, no

sounds will be produced.

The display section does not rotate

- Is the display rotated in the correct direction?

- If there is not sufficient spare length in the

connected cable, it will not be possible to rotate the display.

The display direction is not changed even after rotation of the display.

- The operation of switching the display direction

is required.(p. 33)

Page 24

Specifications

Product specifications

LCD display

38 cm measured diagonally Advanced Super-V and Anti Glare Low Reflection TFT LCD module

Resolution (max.)

XGA 1024 x 768 pixels

Displayable colors (max.)

16.77 million colors (8 bit)

Brightness (max.)

250cd/m

Dot pitch

0.297(H) x 0.297(V) mm

Contrast ratio

400:1

Angle of visibility

Left-right 170°; Up-down 170°

Screen display size

Horizontal 304.1 mm x Vertical 228.1 mm

Video signal

Analog: Analog RGB (0.7Vp-p) [75Ω] Digital: DVI standard based on 1.0

Sync signal

H/V Separate Sync (TTL level: +/-), Sync on Green, Composite Sync (TTL level: +/-)

Expansion compensation

Digital screening (enlargement VGA/SVGA etc. to full screen size.)

Plug & Play

VESA DDC1/DDC2B compatible

Power management

VESA: based on DPMS DVI: based on DMPM

Input signal terminal

Mini D-sub 15 pin (3row), DVI-I 29 pin

USB hub function

1 upstream port, 2 downstream ports (selfpowered hub based on USB standard Rev

1.1)

Audio input terminal

Mini stereo jack

Headphone terminal

Mini stereo jack

Height adjustment

Adjustment range: Approx. 60 mm

Screen rotation

Clockwise 0° - 90°

Screen tilt

Upward 0° -30°; downward 0° - 5°

Screen swivel

90° from left through right

Power supply

AC100 - 240V, 50/60Hz

Temperature of operating environment

5 - 35°C

Power consumption

33W (Not using USB hub) (39W maximum, 3W when in power-saving mode)

Dimensions (W x D x H) (Units: mm)

With long width screen: 337 x 185 x 355 With long heightscreen: 270 x 185 x 391

Weight

Approx. 5.2kg Display area only, approx. 3.3kg

Dimensions (Units: mm)

337

270

415

355

238

270

337

451

391

185

Analogue signal cable: Approx. 2.0 m USB cable: Approx. 2.0 m Audio cable: Approx. 2.0 m

EnglishDeutschFrançaisItalianoEspañolEnglish

Page 25

Relevant signal timings

Specifications

Display mode

VESA

US text Power Macintosh series

640 x 480

800 x 600

1024

720 x 400 640 x 480 832 x 624

1024

768

Hsync

31.5kHz

37.9kHz

37.5kHz

35.1kHz

37.9kHz

48.1kHz

46.9kHz

48.4kHz

56.5kHz

60.0kHz

31.5kHz

35.0kHz

49.7kHz

60.2kH

Vsync

60Hz 72Hz 75Hz 56Hz 60Hz 72Hz 75Hz 60Hz 70Hz 75Hz 70Hz

66.7Hz

74.6Hz 75Hz

Dot frequency

25.175MHz

31.5MHz

36.0MHz

40.0MHz

50.0MHz

49.5MHz

65.0MHz

75.0MHz

78.75MHz

28.3MHz

30.2MHz

57.3MHz

80.0MHz

ANALOG

DIGITAL

- Recommended resolution is 1024 x 768.

- All are compliant only with non-interlaced.

- For a digital signal input, it can be connected to a computer with a DVI-compatible output terminal

(DVI-D24 pin or DVI-I29 pin) and which has XGA output ability. (Depending on the computer to be connected, correct display may or may not be possible.)

- Frequencies for Power Macintosh is reference values. To connect, another adapter (commercially available) may be required.

- If the monitor is receiving timing signals that are not compatible, [OUT OF TIMING] will appear. Follow your computer’s instruction manual to set the timing so that it is compatible with the monitor.

- If the monitor is not receiving any signal (synch signal), [NO SIGNAL] will appear.

The analog RGB input connector pin

(Mini D-sub connector with 15 pins)

No. Function

1 Red video signal input 2 Green video signal input 3 Blue video signal input 4 GND 5 GND 6 For red video signal GND 7 For green video signal GND 8 For blue video signal GND

9 DDC/+5V 10 GND 11 N.C. 12 DDC data 13 For Hsync signal input 14 For Vsync signal input 15 DDC clock

Page 26

Specifications

The DVI-I input connector pin

(DVI-I connector with 29 pins)

No. Function No. Function

1 TMDS data 2- 16 Hot plug detection

2 TMDS data 2+ 17 TMDS data 0-

3 TMDS data 2/4 shield 18 TMDS data 0+

4 N.C. 19

TMDS data 0/5 shield

5 N.C. 20 N.C.

6 DDC clock 21 N.C.

7 DDC data 22 TMDS clock shield

Analogue vertically synchronised

8 23 TMDS clock +

signal

9 TMDS data 1- 24 TMDS clock -

10 TMDS data 1+ C1

11 TMDS data 1/3 shield C2

12 N.C. C3

13 N.C. C4

Analogue red image signal

Analogue green image signal

Analogue blue image signal

Analogue horizontally synchronised signal

14 +5V C5 Analogue GND

15 GND

Power management

The monitor is based on the VESA DPMS*1 and the DVI DMPM*2 standards. To activate the monitor's Power Management function, both the video card and the computer must conform to the VESA DPMS standard and the DVI DMPM standard.

DPMS: Display Power Management Signalling

DPMS mode Screen Power H-sync V-sync

consumption

ON Display on 33W* Yes Yes

STANDBY No Yes

SUSPEND Display off 3W Yes No

*2 DMPM: Digital Monitor Power Management

DMPM mode Screen Power

consumption

ON Display on 33W*

OFF Display off 3W

*Not using USB hub

OFF No No

*Not using USB hub

EnglishDeutschFrançaisItalianoEspañolEnglish

DDC (Plug & Play)

This monitor supports the VESA DDC (Display Data Channel) standard. DDC is a signal standard for carrying out Plug & Play functions on the monitor or PC. It transfers information such as degree of resolution between the monitor and PC. You can use this function if your PC is DDC compliant and if it is set so that it can detect the Plug & Play monitor. There are many varieties of DDC due to the differences between systems. This monitor works with DDC1 and DDC2B.

Page 27

Installing set-up information and the ICC profile (For Windows)

Depending on the computer or OS, it may be necessary to use the computer to operate the installation of monitor set-up information etc. If so, follow the steps below to install the monitor set-up information. (Depending on the type of computer or OS, command names and methods may differ. Please follow the computer’s own operation manual while reading this.)

About the ICC profile

An ICC (International Color Consortium) profile is a file that describes the color characteristics of the LCD monitor. By using an application that works together with an ICC profile, a high color resolution can be realized.

- Windows98/2000/Me/XP all use the ICC profile.

- When installing Windows98/2000/Me/XP setup information (described below), the ICC profile is also installed. If you would like to install the ICC program only, please refer to

Installing the ICC profile on page 30.

- When using an ICC profile, set [COLOR

MODE] and [WHITE BALANCE] to [STD], and set [HUE] and [SATURATION] to [0].

Installing set-up information

For Windows95

Installing monitor set-up information into Windows95. This explanation assumes that the CD-ROM drive is "D drive".

1. Load the accessory CD-ROM into the D drive of the computer.

2. Click on the [Start] button. From [Settings], choose [Control Panel].

3. Double click on [Display].

4. Click on [Settings], [Advanced Properties], and [Monitor], then [Change].

5. Click on [Have disk], confirm that [Copy manufacturer's files from:] is [D:] then click [OK].

6. Confirm that the monitor details are selected, and click [OK].

7. Check that the monitor details are displayed, then click [Apply].

8. Click [OK], and close the window.

For Windows98

Installing monitor set-up information into Windows98, and setting the monitor's ICC profile as a predetermined value. This explanation assumes that the CD-ROM drive is "D drive".

If the "Add new Hardware Wizard" has appeared:

1. Load the accessory CD-ROM into the D drive of the computer.

2. Click [Next].

3. Check [Display a list of all the drivers in a specific location, so you can select the driver you want.], then click [Next].

4. When [Models] is displayed, click on [Have disk], confirm that [Copy manufacturer's files from:] is [D:], and click [OK].

5. Confirm that the monitor details are selected, then click [Next], [Next], and [Finish]. If the "Add New Hardware Wizard" appears, repeat the installation commands beginning from 2 above.

If the "Add New Hardware Wizard" has not appeared:

1. Load the accessory CD-ROM into the D drive of the computer.

2. Click on the [Start] button. From [Settings], choose [Control Panel].

3. Double click on [Display].

4. Click on [Settings], [Advanced] and [Monitor].

5. In [Options], check [Automatically detect Plug & Play monitors] and click on [Change].

6. Click [Next].

7. Click on [Display a list of all the drivers in a specific location, so you can select the driver you want.], then click [Next].

8. When [Models] is displayed, click on [Have disk], confirm that [Copy manufacturer's files from:] is [D:], and click [OK].

9. Confirm that the monitor details are selected, then click [Next], [Next], and [Finish].

10. Check that the monitor details are displayed, then click [Apply].

11. Click [OK], and close the window.

Page 28

Installing set-up information and the ICC profile (For Windows)

For Windows2000

Installing monitor set-up information into Windows2000, and setting the monitor's ICC profile as a predetermined value. This explanation assumes that the CD-ROM drive is "D drive".

1. Load the accessory CD-ROM into the D drive of the computer.

2. Click on the [Start] button. From [Settings], choose [Control Panel].

3. Double click on [Display].

4. Click on [Settings], [Advanced] and [Monitor].

5. Click on [Properties], [Driver] and [Update Driver].

6. When [Upgrade Device Driver Wizard] appears, click [Next].

7. Check [Display a list of the known drivers for this device so that I can choose a specific driver] and click [Next].

8. When [Models] is displayed, click on [Have disk], confirm that [Copy manufacturer's files from:] is [D:], and click [OK].

9. Select the monitor from the list displayed and click [Next].

10. Click [Next], confirm that the monitor's name appears on the screen, and click [Finish]. If [The Digital Signature Not Found] appears, click [Yes].

11. Click on [Close].

12. Click [OK], and close the window.

For WindowsMe

Installing monitor set-up information into WindowsMe, and setting the monitor's ICC profile as a predetermined value. This explanation assumes that the CD-ROM drive is "D drive".

If the "Add new Hardware Wizard" has appeared:

1. Load the accessory CD-ROM into the D drive of the computer.

2. Check [Specify the location of the driver [Advanced]] and click [Next].

3. Check [Display a list of all the drivers in a specific location, so you can select the driver you want.], then click [Next].

4. When [Models] is displayed, click on [Have disk], confirm that [Copy manufacturer's files from:] is [D:], and click [OK].

5. Select the monitor details from the list, then click [Next], [Next], and [Finish]. If the "Add new Hardware Wizard" appears, repeat the installation commands beginning from 2 above.

If the "Add New Hardware Wizard" has not appeared:

1. Load the accessory CD-ROM into the D drive of the computer.

2. Click on the [Start] button. From [Settings], choose [Control Panel].

3. Double click on [Display].

4. Click on [Settings], [Advanced] and [Monitor].

5. In [Options], check [Automatically detect Plug & Play monitors] and click on [Change].

6. Check [Specify the location of the driver [Advanced]] and click [Next].

7. Check [Display a list of all the drivers in a specific location, so you can select the driver you want.] and click [Next].

8. When [Models] is displayed, click on [Have disk], confirm that [Copy manufacturer's files from:] is [D:], and click [OK].

9. Select the monitor details, then click [Next], [Next], and [Finish].

10. Check that the monitor details are displayed, then click [Apply].

11. Click [OK], and close the window.

EnglishDeutschFrançaisItalianoEspañolEnglish

Page 29

Installing set-up information and the ICC profile (For Windows)

For WindowsXP

Installing monitor set-up information into WindowsXP, and setting the monitor's ICC profile as a predetermined value. This explanation assumes that the CD-ROM drive is "D drive".

1. Load the accessory CD-ROM into the D drive of the computer.

2. Click on the [Start] button. Choose [Control Panel].

3. Switch to "Classic View".

4. Double click on [Display].

5. Click on [Settings], [Advanced] and [Monitor].

6. Click on [Properties], [Driver] and [Update Driver].

7. When [Hardware Update Wizard] appears, check [Install from a list or specific location [Advanced]] and click [Next].

8. Check [Don't search. I will choose the driver to install.] and click [Next].

9. Click on [Have Disk], confirm that [Copy manufacturer's files from:] is [D:], and click [OK].

10. Select the monitor from the list displayed and click [Next]. If [has not passed Windows Logo testing...] appears, click [Continue Anyway].

11. Confirm that the monitor's name appears on the screen.

12. Click on [Finish].

13. Click on [Close].

14. Click [OK], and close the window.

Installing the ICC profile

Installing the monitor’s ICC profile. (If the set-up information has already been installed, so too has the profile, and there is no need to install it.) This explanation assumes that the CD-ROM drive is "D drive".

1. Load the accessory CD-ROM into the D drive of the computer.

2. Click on the [Start] button. From [Settings], choose [Control Panel].

3. Double click on [Display].

4. Click on [Settings] and [Advanced].

5. Click on [General] and from [Compatibility] select [Apply the new display setting without restarting], then click on [Color Management].

6. Click [Add], and select CD-ROM as the file location.

7. Choose the color profile that you would like to install, and click on [Add].

8. Choose the profile and click on [Set As Default].

9. Click [OK], and close the window.

- When using an ICC profile, set [COLOR MODE] and [WHITE BALANCE] to [STD], and set [HUE] and [SATURATION] to [0].

Page 30

Information about the ColorSync profile (For MacOS)

About the ColorSync profile

ColorSync is the Apple Corporation's color management system and is a function that enables color resolution to be realized when used with a compatible application. A ColorSync profile describes the color characteristics of the LCD monitor.

Notes:

- This monitor's ColorSync profile works with

MacOS8.5 or above.

- When using the ColorSync profile, set [COLOR MODE] and [WHITE BALANCE] to [STD], and set [HUE] and [SATURATION] to [0].

Setting up the ColorSync profile

Notes:

- In addition, it is necessary to have PC Exchange or File Exchange installed in your system.

- Depending on the type of computer or OS,

command names and methods may differ. Please follow the computer’s own operation manual while reading this.

EnglishDeutschFrançaisItalianoEspañolEnglish

1. Load the accessory CD-ROM into the CD-ROM

drive of the computer.

2. Copy the profile used by the application disk to

the ColorSync profile folder in the system folder.

3.Using the ColorSync on the control panel, choose the profile to be used.

Page 31

Instructions for attaching a VESA compliant arm

An arm or stand based on the VESA standard (commercially available) can be attached to the monitor. Procurement of the arm or stand is at the customer's discretion.

Arms or stands able to be used

Attachments must satisfy the following.

- Compatible with the VESA standard

- Have a gap of 75 mm x 75 mm between the

screw holes on the section to be attached.

- Not be likely to fall off or break off after being attached to the monitor.

How to attach the arm or stand

- Be careful not to overly bend the cable or add

extension cords as this could lead to malfunction.

- While following these instructions, please also refer to the installation instructions in the operation manual included with the arm or stand.

1.Turn off the monitor’s power and unplug AC plug from AC outlet.

2.Remove the cable.

3.Spread out a soft cloth on a suitable horizontal surface.

4.Being careful not to damage the monitor, gently lay the monitor on it display-side down.

Notes:

- The stand is specially made for use with this

monitor. Once having removed the stand, never attempt to attach it to another device.

- Once having removed the screws, store them together with the stand and if the stand is ever re-attached be sure to use the original screws. Using different screws could lead to a malfunction.

CAUTION!

Do not disassemble the stand. Parts may spring out and cause injury.

6. Attach the arm to the monitor with the four screws.

CAUTION!

Securely grasp both the display and stand, and gently tip over. When the monitor is inclined, the stand may suddenly pop out and cause injury.

5. Remove the four screws and then remove the stand from the monitor.

Note:

- The screws used to attach the arm should be M4

screws with a length of 6 mm ~ 8 mm protruding from the surface to be attached. Using different screws could lead to malfunction or may lead to the monitor falling off,internal damaged,personal injury.

6 - 8 mm

Screw used to attach arm

Arm

Part of monitor to which arm is attached

Page 32

Information about the Pivot Software(Long height/width display)

When rotating the display, change the display orientation using Pivot Software.

Compatible operating systems (OS) for the Pivot Software (trial version) that comes with the monitor:

Windows 98/2000/Me/XP Macintosh OS 8.x - 9.1

- Depending on the graphics accelerator, it may be impossible to use Pivot Software, even with a compatible OS.

For production information and inquiries regarding Pivot Software:

Portrait Displays, Inc. (http://www.portrait.com)

Installation of Pivot Software (trial version)

For Windows

1. Quit all applications being used.

2. Load the accessory CD-ROM into the CD-ROM

drive of the computer.

3. Open the [My computer] CD-ROM.

4. Double click on the [Pivot] folder.

5. Double click on [SETUP.exe].

6. Click [Next].

7. Choose [I accept the tems in the License

Agreement].

8. Click [Next].

9. Input your Customer information [User Name]

and [Organization].

10. Click [Next].

11. Click on [Install].

Installation will begin.

12. When the message indicating installation is

finished is displayed, click [Next].

13. Click on [Finish].

14. Click on [Yes] and restart the computer.

Switching display direction

For Windows

Choose [Rotate] by right clicking the mouse, or left

clicking on at the lower right of the screen.

Each time [Rotate] is selected, the display direction switches.

For Macintosh

Choose [ROTATE Now] from

of the screen.

Each time [ROTATE Now] is selected, the display direction switches.

Notes:

- Rotation of the display to match the display direction is done manually. (p.11)

- The display direction on the OSD menu is switched using [OSD PIVOT] on the [MODE SELECT] menu. (p.21, 23)

at the lower right

EnglishDeutschFrançaisItalianoEspañolEnglish

For Macintosh

1. Quit all applications being used.

2. Load the accessory CD-ROM into the CD-ROM drive of the computer.

3. Open the CD-ROM.

4. Double click on the [Pivot] folder.

5. Select the desired language.

6. Double click on [Install MacPortrait].

7. Drag the [MacPortrait Install] icon onto the desired disk. Installation will begin.

8. When the message indicating installation is finished is displayed, click on [Restart].