Sharp LE812, LE814, LE822, LE824, LE833 Operating Manual

ENGLISH

Experience Reality

AQUOS LCD-TVs – Spring/Summer 2011

DLNA-

Installation Guide

for LAN connections

Page - 1 -

LE820 - LE822 - LE814 - LE824 - LE914 - LE925

Contents:

1. Preparation of the PC (Enabling multimedia folder)

2. Settings of the LCD-TV device

3. Description of terms

In case during the installation of the DLNA function at your SHARP LCD tv

from the 81x - , 82x - oder 92x - series you encounter any problems, use the
following instructions for installation.

In the following part of the manual you will find examples of installations and

answers to frequently asked questions concerning the above-mentioned

device series:

Preparation of the LCD-TV device:

Connect the PC and the LCD-TV to the router with a LAN cable and run a

software update on the LCD-TV.

You can find latest software in the service section of www.sharp.de website

on the Internet.

After updating software start the installation of the TV again!

In order to do so choose the menu "Set up",

After entering the menu highlight „ Reset“ and confirm your choice with the

„OK “- button on the remote control. Confirm the resetting and

restarting of the device (see instruction manual). This will take a few seconds.

Afterwards the image of installation will appear on the device. Carry it out

according to your local conditions.

Page - 2 -

DLNA – Settings for PC's with Windows XP and Mediaplayer version 11 or

higher

1. Launch Mediaplayer (version 11 or higher) and switch on the LCD-TV!

Choose “Extras“ and later “Options“.

2. The following notice will appear. Choose the tab "Media Library".

Page - 3 -

Click “Set up enabling".

3. Now choose "Settings" (the number of displayed devices may vary).

Page - 4 -