Sharp LC-32CHE5111K, LC-32CHE5111KW, LC-32CFE5111KW, LC-32CFE5111K, LC-40CFE5111K User Manual

...
Page 1
User manual
Models:
LC-32CHE5111K LC-32CHE5111KW LC-32CFE5111KW LC-32CFE5111K LC-40CFE5111K
Image for illustration purposes only. Actual product may vary.
LC-43CFE5111K LC-49CFE5001K LC-50CFE5101K LC-50CFE5111K
Page 2
Page 3
3
Manufacturers Guarantee
IMPORTANT GUARANTEE INFORMATIONIMPORTANT GUARANTEE INFORMATION
Congratulations on purchasing this television. We hope you have many years of trouble free
enjoyment from your purchase.
Your product is covered under the manufacturers guarantee for 12 months from the date
of purchase.
If you experience any diffi culties with your TV, please refer to the ‘Frequently asked questions’ section
in this user guide.
If you are still unable to remedy the issue, try resetting the TV to factory settings. (Details in the
‘Settings menu’ section of this user guide). Alternatively you can contact the helpline on the
number below.
In the event that a fault is diagnosed, the helpline will arrange to collect the TV from your home
or work address, return it to our service centre, repair the item and then return it to you.
If we believe we cannot offer a permanent repair, we will replace the item.
Technical Support Information
Telephone UK 0871 097 1163, ROI 01443 3940
Web support: www.umc-uk.co.uk
The telephone opening hours are Monday to Friday 8.30am to 6pm, Saturday 9am – 5pm.
UK: Calls cost 12p per minute plus your phone company’s access charge.
ROI: Calls are charged at a local rate.
You must retain all packaging materials, in addition to your proof of purchase/receipt,
as you will need these in the event of warranty/service support.
This guarantee is in addition to and does not affect your statutory rights.
If you need to call the helpline, you will need the following information.
1) Model No ______________________________________ (You can fi nd this on the rear of the TV)
2) Date of purchase ______________________________________ (You can fi nd this on your sales receipt)
3) Serial Number ______________________________________ (You can fi nd this on the rear of the TV)
Model No
EXAMPLE OF LABEL ON REAR OF TV
Serial No.
3
Page 4
Important safety instruction
Please read these instructions. All the safety and operating instructions should be read before the appliance is operated.
The ideal distance to watch the television is
approximately fi ve times the length of the diagonal measurements of the TV screen.
Ensure the television is not placed on top of the
power cable as the weight of the television may damage the cable and cause a safety hazard.
Never place mobile phones, speakers or any
other device which may cause magnetic or radio interference, near the television. If interference is apparent, move the device causing the interference away from the television.
To disconnect the apparatus from the mains, please
use the mains plug located on the underside/rear of the TV.
Ensure that the mains plug is always easily accessible.
Warnings
Television sets which weigh 20kg or more must be
lifted and carried by at least 2 people.
This television does not contain any parts that are
serviceable by the user. In case of a fault, contact the manufacturer or authorised service department. Exposing the internal parts inside the TV may endanger your life. The manufacturers guarantee does not extend to faults caused by repairs carried out by unauthorised third parties.
To reduce the risk of fi re, electric shock or damage
to the TV, do not expose it to dust, rain or moisture. Never expose the TV to dripping or splashing and do not place objects fi lled with liquids on or near the TV.
Do not connect any external devices (DVD player,
games console etc) when the TV is switched on. Disconnect both the TV and device from the mains before connecting. Only switch appliances on when the connection process is complete.
Do not place the television in a confi ned space and
do not obstruct the ventilation openings at the rear of the television.
When installing on a wall, ensure the TV is at
least 5cm from the wall for ventilation.
Always ensure that the TV’s ventilation openings
are not covered with items such as newspapers, table-cloths, curtains, etc.
Dispose of this television and any components
including batteries in an environmentally friendly manner. If in doubt, please contact your local authority for details of recycling.
Safety
For your safety, this appliance is fi tted with a
fused 3 pin mains plug. Should the fuse need to be replaced, ensure that any replacement is of the same amperage and approved with the BSI mark.
Never try and replace the mains plug unless you have
adequate qualifi cations and are legally authorised to do so. In the event that a replacement mains cable is required, contact the manufacturer for a suitable replacement.
Never use the television if it is damaged in any way.
Always place the television on a fl at level surface
avoiding anywhere which may be subject to strong vibration.
WARNING: Excessive noise when using earphones and headphones can cause loss of hearing.
Maintenance
To clean your TV, wipe with a soft, dry cloth. If the
surfaces are extremely dirty, use a soft cloth dipped in a soap and water solution or a weak detergent solution.
Never use alcohol, paint thinner or benzene to clean
this unit.
Before using a chemically treated cloth, read the
instructions that came with the cloth carefully.
CAUTION: If water or other liquid enters the television through the display panel surface, a malfunction may occur.
Packaging
The safest way to transport your item is in the
original box/packaging - please save your packaging for this.
You will need the original box/packaging in the
event of warranty/service repair or support. We are unable to carry out warranty/service if you are unable to package the item correctly.
4
Page 5
5
Important information regarding use of video games, computers, captions or other  xed image displays
The extended use of  xed image program material can cause a permanent “shadow image” on the LCD/LED panel, also known as “screen burn”.
This “shadow image” can appear in the background during normal viewing. This type of irreversible LCD/LED panel deterioration can be limited by observing the following steps:
1. Reduce the brightness/contrast setting to a minimum suitable viewing level.
2. Do not display the  xed image for extended periods of time.
3. Turn the power o when not in use.
Examples of images that are more likely to cause “screen burn” are as follows (this is not an exhaustive list):
TV channel logos: e.g. shopping channel logos and
pricing displays - especially if they are bright and stationary. Moving or low-contrast graphics are less likely to cause ageing of the screen.
Time displays.
Teletext: Do not view a stationary page for a long
period of time
TV/DVD menus: e.g. listings of DVD disc content.
Pause mode: Do not leave the TV in pause mode
for long periods of time, e.g. when watching DVDs or videos.
Trademarks
HDMI
The HDMI logo and High-De nition Multimedia Interface are trademarks or registered trademarks of HDMI Licensing LLC.
HDTV
The “HD TV” Logo is a trademark of DIGITALEUROPE.
HDTV 1080p
The “HD TV 1080p” Logo is a trademark of DIGITALEUROPE.
DVB The DVB logo is the registered trademark of the Digital Video Broadcasting (DVB) project.
Dolby
Manufactured under license from Dolby Laboratories. Dolby and the double-D symbol are trademarks of Dolby Laboratories.
Important: Once ‘shadow image/screen burn’ occurs, it will never disappear and is not repairable under warranty.
How do I dispose of this product?
UK: Waste electrical products should not be
disposed of with household waste. Please dispose of the product at a designated collection point for recycling of WEEE. For your nearest facilities, please see www.recycle-more.co.uk or in store for details.
ROI: Waste electrical products should not be disposed of with household waste. Separate disposal facilities exist. Check with your local authority or retailer for recycling advice.
Batteries
Do not expose batteries to high
temperatures, excessive heat, prolonged sunshine or fi re as this may cause leakage, explosion or ignition. Observe the correct polarity when inserting batteries.
Do not use different types of batteries together or
mix old and new batteries.
Dispose of batteries in an environmentally
friendly way.
Certain regions may regulate the disposal of
batteries. Please consult your local authority.
Cd
5
Page 6
6
Page 7
7
CONTENTS
Manufacturers guarantee information . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3
Important safety instructions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4-5
What is included in the box . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8
Attaching / detaching the stand . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9
Securing the TV to a wall / wall mounting . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10
Remote control . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11
TV buttons and Input Source menu . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13
TV menu operation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 19-26
Picture menu . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 19-20
Sound menu . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 21
Channel menu . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 22
Lock menu . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 23
Time menu . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 24
Network confi guration . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 25
Settings menu. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 26
7 day TV guide and channel list . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 27
USB record - Freeview / Saorview . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 28
USB mode / media player . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 29
General information . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 31-39
Frequently asked questions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 31
Technical specifi cations . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 32-39
Connections . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14-17
7
Page 8
What is included in the box
WHAT IS INCLUDED IN THE BOX
Accessories
Included with this TV are the following accessories.
1 x User guide
User guide
1 x Quick start guide
Quick start
guide
1 x Remote control and 2 x AAA batteries
1 x Mini composite / AV cable
1 x Mini component / YPbPr cable
1 x TV
1 x RF cable
1 x SCART to mini-AV cable (For LC-49CFE5001K & LC-50CFE5101K models only)
1 x Stand installation pack
4 x
1 x L (left)
1 x R (right)
Please save your box/packaging as you will need this in the event of warranty/service repair or support. We are unable to carry out warranty/service if you are unable to package it correctly. The safest way to package your item in the event of warranty/service repair is in it’s original box/packaging.
8
Page 9
9
Attaching/detaching the stand
ATTACHING THE STAND
Attaching the stand/feet
To complete the stand/feet installation you will require a cross head screw driver.
Screws that are included.
4 x
TV panel must be facing downwards.
1
L
(fi g.1) Place the TV set on a fl at and clean surface with the panel facing downwards to avoid damage, then fi x the stand/feet shown. The feet are
marked L (left) and R (right).
R
(fi g.2) Secure the stand/feet to the underside of the TV set using
3
4
the 4 screws provided.
R
1
2
2
L
Detaching the stand
Remove the screws highlighted then remove the stand/feet from the underside of the TV set.
L
4 x
3
4
R
1
2
4 x
9
Page 10
Securing the TV to a wall/wall mounting
SECURING THE TV TO A WALL
Securing the TV to a wall
For maximum security in the home, when using a TV with its stand, anti-tip straps should be fi tted. These are available from supermarket websites and other websites and are an easy, inexpensive and effective way of ensuring your TV stays safely upright. Straps are designed to be attached to the rear of the TV and then tethered to the wall or the furniture the TV is stood on, these are fi tted as follows.
A) Using one or both of the top wall-mounting holes and screws fasten one end of the fastening cord/s to the TV. (the screws are already supplied in the wall mounting holes)
B) Secure the other end of the fastening cord/s to your wall. (you will need screws/fi xings suitable for your wall type - available separately from most DIY stores).
Note - Please ensure that children do not climb on the TV set.
The Royal Society for the Prevention of Accidents is urging people to take care with fl at-screen televisions.
RoSPA stated in 2010 that “Toddlers are particularly at risk of pulling fl at-screen televisions on to themselves. They are unsteady on their feet and are attracted by colourful television images.”
The risk is increased as televisions become lighter.
Wall mounting
IMPORTANT - Before drilling any holes in the wall ensure you are not drilling where there could be any electrical wires, water or gas pipes.
1) Remove the four screws located at the back of the TV set.
2) The wall mount can now be easily attached to the mounting holes, located on the back of the TV, using the same four screws removed.
For VESA wall mounting information please refer to the Technical Specifi cation page.
For optimum viewing, if wall mounting the TV higher than eye level, the TV should be tilted downwards so that the TV’s screen is ‘face on’. See fi g 1 and 2.
fig 1 fig 2
INCORRECT
TV
CORRECT
TV
Viewing angle
Important – If wall mounting this TV, only use the screws already provided in the wall mounting holes located at the back of the TV, using other screws which are longer could cause irreparable damage to internal parts.
10
Viewing angle
Page 11
11
Remote control
REMOTE CONTROL
On initial set up of your TV you’ll need to pair the remote control to the TV. To pair the remote control to the TV, ensure the TV is in standby mode, press and hold the green and yellow buttons (highlighted below) on the remote control for a few seconds.
Key
For models with integrated DVD players. For models with PVR Function. For models with USB Playback. For models with 3D functions.
1
STANDBY - Switch on TV when in standby or vice versa. MUTE - Mute the sound or vice versa. DTV - Switch to digital source. RADIO - Switch to radio whilst in digital TV source. USB - Switch to USB source. DVD - Switch to DVD source.
2
NUMBER BUTTONS - 0–9 to select a TV channel directly. TV GUIDE - Opens the 7 day TV guide (digital TV mode).
- To return to the previous channel viewed.
1
2
3
VOL (+/-) - To increase/decrease the sound level. P.MODE - Scrolls through picture mode options. S.MODE - Scrolls through sound mode options. FAV - To display favourites menu. CH (+/-) - To increase or decrease the channel being watched. MENU - To display OSD menu. EXIT - To exit all menus.
- Allows you to navigate the on-screen menus and adjust
.the system settings to your preference.
SOURCE - To display the input/source menu. INFO - Press once for now/next channel information.
- Press twice for information about the current programme.
4
ASPECT - To switch the screen between the different picture formats. SLEEP - Press repeatedly to cycle through the sleep options. AUDIO - To change the audio language (if available). SUBTITLE - To switch the dialogue at the bottom of the screen (on/off). TEXT - To enter/exit Teletext (Analogue TV). TEXT HOLD - Teletext mode - Holds current page which is
displayed (Analogue TV).
DISPLAY - To switch off the screen when listening to radio. TEXT/DVD ZOOM - Zoom function for Teletext and DVD. DVD MENU/RECORD - Access the DVD menu and USB record function.
- To restart the current chapter
- To advance forward to the next chapter
- To stop the playback/Eject Disc
(To EJECT the disc press/hold the button for 4 seconds)
- To play in fast rewind mode
- To play in fast forward mode
- To play/pause
DVD SETUP/REC LIST - Opens up DVD menu or opens the list of what has been previously recorded.
GOTO - To go to a specifi c chapter. A-B - Press once to set point, press a second time to return to point. ANGLE - Select different angle of DVD. REPEAT - To repeat playback.
3
4
11
Page 12
12
Page 13
13
TV Buttons and Input Source Menu
TV BUTTONS AND INPUT SOURCE MENU
1
2
3
4
5
6
7
Volume up and menu right
1
Volume down and menu left
2
Programme/channel up and menu up
3
Programme/channel down and menu down
4
Displays menu/OSD
5
Displays the ‘Input Source’ menu
6
Standby power On/Off
7
Note: The shape of the TV buttons may vary by model.
Choosing Mode Input/Source
Use the source menu to switch between input/connections.
A) Using the buttons on the remote control:
1) Press [SOURCE] - The source menu will appear.
2) Press [\/] or [/\] to select the input you require.
3) Press [OK].
B) Using the buttons on the Television:
1) Press [SOURCE].
2) Scroll up / down using CH+/ CH- buttons to the input/source you require.
3) Press Vol+ to change input/source to the one selected.
For further information on input/connections please view ‘Connections’ pages.
An example of the ‘Input Source’ menu
(will vary by model)
13
Page 14
Connections
CONNECTIONS
The following input/outputs for the following models only:
LC-49CFE5001K and LC-50CFE5101K.
M
USB
L
CI CARD IN
K
AV IN
J
Y Pb Pr
I
Digital Audio
Output
A
A
LAN* Network connection
B
Digital audio Digital optical audio output
C
HDMI 1 HDMI input
D
HDMI 2 HDMI input (ARC)
E
VGA PC VGA-PC Input
F
VGA PC audio in 3.5mm PC audio input
RF in RF / TV aerial input
G
B
C
D
VGA/PC IN
E
VGA /PC (Audio in)
F
Earphones Earphone input
HDMI 3 HDMI input
YPbPr HD input (Ypbpr)
AV in Audio/video input
CI card in Common interface module
USB x 2 USB port
*The LAN/Ethernet port is used for Freeview HD services only.
H
EARPHONE
G
H
I
J
K
L
M
14
Page 15
15
Connections
CONNECTIONS
The following input/outputs for the following models only:
LC-32CHE5111K, LC-32CHE5111KW, LC-32CFE5111KW, LC-32CFE5111K, LC-40CFE5111K, LC-43CFE5111K and LC-50CFE5111K.
N
EARPHONE
M
AV IN
L
CI CARD IN
K
Y Pb Pr
J
VGA/PC IN
A
A
LAN* Network connection
B
HDMI 1 HDMI input
C
HDMI 2 HDMI input (ARC)
D
VGA PC VGA-PC input
E
SCART SCART input
F
RF in RF / TV aerial input
Digital audio Digital optical audio output
G
B
C
D
E
VGA /PC (Audio in)
I
USB
H
Digital Audio
Output
F
G
HDMI 3 HDMI input
H
I
USB x 2 USB port
J
VGA PC audio in 3.5mm PC audio input
K
YPbPr HD input (Ypbpr)
L
CI card in Common interface module
M
AV in Audio/video input
N
Earphones Earphone input
*The LAN/Ethernet port is used for Freeview HD services only.
15
Page 16
Connections
CONNECTIONS
Note: Connecting cables are shown for example only and may not be included. Please check ‘What Is Included In The Box’ page.
Connecting to a device with Composite AV/Video output
TV source should be set to Composite/AV
L (white)
R (red)
Mini AV in
Connecting to a device with SCART output (using SCART to AV cable)
TV source should be set to Composite/AV
Video (yellow)
Mini AV in
Scart
Connecting to a device with SCART output
TV source should be set to SCART
Scart
Scart
Connecting to a device with HDMI output
A HDMI cable can output both video and audio and enables you to enjoy digital-quality video and audio with minimal loss of quality.
TV source should be set to the corresponding HDMI port (HDMI 1, HDMI 2 etc)
HDMI HDMI
Note: This model TV can not be used as a PC/laptop monitor via the HDMI input. The HDMI input is provided to view digital content with compatible external devices
16
Page 17
17
Connections
CONNECTIONS
Connecting to a device with Component/YPbPr output
If you are supplied with a cable from the device which has RED, GREEN, BLUE, RED & WHITE connectors you must connect via Component (for picture) and by phono cable (for sound).
TV source should be set to Component/YPbPr
Y (green)
PB (blue)
Mini
YPbPr
Mini AV in
Video (yellow) is not connected
Connecting to a device with VGA/PC output (Laptop or Desktop Computer)
TV source should be set to VGA/PC
PR (red)
L (white)
R (red)
VGA/PC
in
VGA/PC
(audio
in)
VGA/PC
out
Audio
out
Connecting to an external audio device (Amplifi ers, Surround Sound, Sound Bars etc)
When connecting via the TV’s 3.5mm earphone output, this will disable the TV speakers.
3.5mm
earphone
Digital
audio
out
(optical)
OPTION 1 for 3.5mm EARPHONE Output
OPTION 2 for Digital Optical Audio Output
3.5mm audio
in
Digital
audio
(optical)
in
Connecting an Ethernet/Network cable
The LAN/Ethernet port is used for Freeview HD services only.
Ethernet port
Ethernet port
17
Page 18
18
Page 19
19
TV Menu Operation
PICTURE MENU
To access this menu, press [MENU] button on the remote control. To select a sub menu press [OK]
If you wish to make changes to any of the default settings, use the scroll buttons. To confi rm any settings press [OK] button. To exit this menu at anytime, press [EXIT] button.
Picture Mode - Choose from the following presets:
Dynamic Recommended settings for fast moving pictures
Standard Standard settings
Mild Set to be lighter in colour and less bright
Personal Lets you manually alter all the settings
Economy Power saving mode which reduces the energy used by up to 25% (by reducing the
power to the LED/LCD panel). In Economy mode, the TV will switch itself to
Standby mode after 3-5 hours in the event that the TV buttons or remote control
buttons are not pressed (change the picture mode to another setting to de-activate
this function)
You can make the following adjustments in
Contrast - Switch the balance between black and white.
Brightness - Increase or decrease the brightness of the picture.
Colour - Increases the colour from black and white.
Tint - Lets you increase or decrease the level of tint within the picture
(only available for NTSC input signal).
• Sharpness - Increase or decrease the sharpness of the picture.
Colour Temperature Choose from the following presets:
Normal Default settings
Warm Increases red within the picture
Cold Increases blue within the picture
Personal mode:
19
Page 20
TV Menu Operation
PICTURE MENU
To access this menu, press [MENU] button on the remote control. To select a sub menu press [OK]
If you wish to make changes to any of the default settings, use the scroll
buttons.
To confi rm any settings press [OK] button. To exit this menu at anytime, press [EXIT] button.
Aspect Ratio - Within the UK the picture format varies depending on the channel/broadcast. There are a
number of different options to best meet your needs. Choose from the following settings:
Auto
Automatically displays the best picture format so the picture is in the correct position, black lines maybe
viewable at the top/bottom and/or sides.
4:3
Displays the 4:3 picture in its original size. Side bars are shown to fi ll the 16:9 screen
Fills the screen with a regular 16:9 signal and 4:3 picture format will be stretched to fi ll the screen
Full Screen
Displays the 14:9 picture in the correct proportion. As a result bars are shown on the screen
Zoom1 and Zoom 216:9
The picture is the correct proportion but zoomed in to fi ll the screen
Noise Reduction - Allows you to switch noise reduction ON or OFF.
20
Page 21
21
TV Menu Operation
SOUND MENU
To access this menu, press [MENU] button on the remote control and scroll right. To select a sub menu press [OK]
If you wish to make changes to any of the default settings, use the scroll To confi rm any settings press [OK] button. To exit this menu at anytime, press [EXIT] button.
Sound Mode - Choose from the following presets
Standard Default settings
Music Emphasises music over voices
Movie Provides live and full sound for movies
Sports Emphasises sound for sports
Personal Selects your personal sound settings
You can make the following adjustments in Personal mode:
• Treble - Allows you to adjust treble levels to suit your listening preferences.
• Bass - Allows you to adjust bass levels to suit your listening preferences.
• Balance - To switch the sound between the left and right speakers.
Auto Volume Level (AVL) - When ‘on’ is selected, the volume will attempt to stay at a constant level
regardless of TV programme and advertisements.
Surround Sound - Allows you to turn the surround sound settings ON or OFF.
Digital Output - This is the digital optical audio output. Choose from the following options:
Off To turn off Digital Output
Auto Selects the best settings automatically
PCM Select this option if you are connecting to a Stereo Hi-fi via optical cable (Pulse-code
buttons.
modulation (PCM) is a digital representation of an analogue signal)
Audio Description - This allows the user to switch Audio Description ON or OFF. (Audio Description is
a service available on certain programmes. It provides a description of what is happening during the
selected programme for a person who is visually impaired).
AD Volume - This allows the user to increase and decrease the AD (Audio Description) volume level.
Audio Delay - Enables the user to adjust setting to sync picture and audio.
SPDIF Delay - Enables the user to adjust sound setting to sync picture and audio for external speakers
connected via digital audio output.
21
Page 22
TV Menu Operation
CHANNEL MENU
To access this menu, press [MENU] button on the remote control and scroll right. To select a sub menu press [OK]
If you wish to make changes to any of the default settings, use the scroll buttons. To confi rm any settings press [OK] button. To exit this menu at anytime, press [EXIT] button.
Auto Tuning - Allows you to retune the television for all digital channels, digital radio stations and
analogue devices.
Analogue Manual Tuning - Allows you to manually tune your analogue signal.
Freeview/Saorview Manual Tuning* - Allows you to manually tune your digital signal.
Channel Edit - Allows you to delete, move, skip and select favourite channels.
Important: To receive Freeview/Saorview channels, in particular HD channels, you will need a Digital TV aerial and be in a good Freeview/ Saorview coverage area. You can check the coverage for your area at www.freeview.co.uk or www.saorview.ie
Please note that any Freeview HD channels found during tuning will be placed in channel positions above 100. For example, 101 (BBC1 HD) 102 (BBC2 HD) etc.
*Freeview channels are only available in the UK, Saorview channels are only available in the ROI.
Signal Information - Allows you to view signal frequency, signal quality and signal strength.
CI Information - Pay per view services require a “smartcard” to be inserted into the TV. If you subscribe to
a pay per view service the provider will issue you with a ‘CAM’ and a “smartcard”. The CAM can then be
inserted into the COMMON INTERFACE PORT (CI Card In).
Recorded List - Shows a list of recorded TV programmes.
Schedule List - Lists your programme reminders.
OAD (Software Update) - Switch on/off OAD (over air download) software updates.
Tip: If you do not press any buttons for 30 seconds, the menu will automatically exit. You can change the length of time before the menu exits automatically - see ‘OSD Timer’ in the Time Menu
22
Page 23
23
TV Menu Operation
LOCK MENU
To access this menu, press [MENU] button on the remote control and scroll right. To select a sub menu press [OK]
If you wish to make changes to any of the default settings, use the scroll buttons. To confi rm any settings press [OK] button. To exit this menu at anytime, press [EXIT] button.
System/Hotel Lock - Allows you to lock or unlock the menu. You will be asked to enter a 4 digit password
Use the
Change Password - Allows you to change the password.
Channel Lock - Allows you to lock certain channels manually.
Parental Guidance - Allows you to set the rating to block certain content based on age information.
TV Button Lock - Allows you to lock the buttons on the side of the TV set.
Default Source - Allows the user to set the default source. The default source is the source the TV starts on
when fi rst switched on.
Default Channel - Allows the user to set a channel as the default channel on the Digital source. The
default channel is the channel the TV starts on when fi rst switched on.
Max Volume - Allows you to adjust and set the maximum volume.
Source Lock - Allows you to lock the source menu.
button to quit the password input or use the button to clear. Default password is 0000.
23
Page 24
TV Menu Operation
TIME MENU
To access this menu, press [MENU] button on the remote control and scroll right. To select a sub menu press [OK]
If you wish to make changes to any of the default settings, use the scroll buttons. To confi rm any settings press [OK] button. To exit this menu at anytime, press [EXIT] button.
Off Time - Allows you to set aspecifi c time for your TV to turn off.
On Time - Allows you to set aspecifi c time for your TV to turn on, the channel it will then display, the
source it will be on and also the volume. This function can then be toggled to repeat every day or
acertain day.
Sleep Timer - Lets you set the sleep timer so the television automatically switches off after a set amount
of time. Off -> 10min -> 20min -> 30min -> 60min -> 90min -> 120min -> 180min -> 240min.
OSD Timer - Lets you adjust the amount of time the On Screen Menu stays on the screen
before disappearing.
Auto standby - Set ‘Auto Standby’ to OFF, 3 hours, 4 hours or 5 hours.
Time Zone - Change your current time zone.
24
Page 25
25
Network Confi guration
NETWORK CONFIGURATION
To access this menu, press [MENU] button on the remote control and scroll right. To select a sub menu press [OK]
If you wish to make changes to any of the default settings, use the scroll To confi rm any settings press [OK] button. To exit this menu at anytime, press [EXIT] button.
The Network connection is only intended to access Pay TV services from your Freeview/Saorview broadcaster. Please note, the TV cannot be used for internet access.
For the network confi guration to work the TV will need to be connected to your home network via an ethernet cable, with these requirements in place the TV will connect to the network automatically.
IP Confi g - Allows you to access LAN network connection settings. choose from the following options:
Auto Will automatically connect the TV to your home network(this is the default setting
and is highly recommended)
Manual Allows you to manually change the IP, Netmask, Gateway and DNS information.
Network Info - Allows you to view Information about network settings
Network Test - Allows you to test the network connection.
buttons.
25
Page 26
TV Menu Operation
SETTINGS MENU
To access this menu, press [MENU] button on the remote control and scroll right. To select a sub menu press [OK]
If you wish to make changes to any of the default settings, use the scroll buttons. To confi rm any settings press [OK] button. To exit this menu at anytime, press [EXIT] button.
Language - Allows you to change the language of the menu.
Audio Language - Shows the current audio language.
Subtitle Language - Shows the current subtitle language.
Hearing Impaired - This allows the user to turn on the Hearing Impaired function, this produces subtitles
on the screen which provide a description of what is happening during the selected program.
Blue Screen - Changes the background when there is no input between clear and a blue background (Only
available on some sources).
PVR File System - PVR Recording options:
Select disk Select USB port and disk partition
TimeShift Size Set size time of shift buffer.
Format Start You can format connected USB storage device to FAT 32 fi le system.
WARNING: ALL DATA ON THE USB DEVICE WILL BE DELETED
Speed check Tests write speed of connected USB storage devices.
First Time Installation - Allows you to access the First Time Installation menu and retune the TV set.
Software Update (USB) - From time to time we may release new fi rmware to improve the operation of
the television (available to download). This menu lets you install the new software/fi rmware onto the
television. Further details of how to do this will be issued with the fi rmware. Contact the helpline or refer
to the ‘product support’ section of the website.
Reset TV - This resets the menus to factory settings and clears all the TV channels from
the television.
HDMI CEC (Consumer Electronic Control) - Allows HDMI devices to control each other and allows the user
to operate multiple devices with one remote control. (only available with compatible devices).
LED Status - Allows the user to switch the LED power indicator light ON or OFF when the TV being
operated. (When this option is set to OFF the LED power indicator light will fl ash when the remote
control is used).
Version Info - Allows you to view the version/information of the software installed on the TV set.
Store Mode - switch ON/OFF shop demonstration mode (available only if store mode was selected during
fi rst time installation)
26
Page 27
27
7 Day TV Guide and Channel List
7 Day TV GUIDE
11 Dec 2014 12: 58
1 BBC ONE Oxford
CHANNEL
1 BBC ONE Oxford
2 BBC TWO
3 ITV
4 Channel 4
5 Channel 5
6 ITV2
7 BBC THREE
9 BBC FOUR
12:15 - 13:00 11 Dec 2014 Norfolk: Tim wonnacott and the teams are in Norfolk in search of great buys to take to auction. Expertise comes from Catherine Southon and Jonathan Pratt, and Tim visits Ham House.
Lifestyle
12:00
Bargain Hunt
Daily Politics The Blue Planet
Let’s Do Christmas with Gino and Mel
Come Dine with Me
Coronation Street
Three Wise Women
You’ve Been Framed! Royal...
This is BBC Three
This is BBC Four
Come Dine with Me
Come Dine...
ITV News & Weather
Jame...
5..
Record
Move
Remind
Info
Prev Day
EXIT
Next Day
OK
OK
Home and Away
BBC News at One South...
Doctors
13:00 13:30Now
Info. Exit.
7 DAY TV GUIDE
TV Guide is available in Saorview/Freeview TV mode. It provides information about forthcoming programmes (where supported by the Saorview/Freeview channel). You can view the start and end time of all programmes and on all channels for the next 7 days and set reminders.
1) Press [TV GUIDE] on the remote control, the following 7 Day TV Guide will appear.
2) Navigate through the menu using
.
You can now:
Record a programme by pressing RED (USB device must be connected) Set a reminder by pressing GREEN View a previous day by pressing YELLOW View the next day by pressing BLUE
3) Press [EXIT] to exit the 7 day TV Guide
Channel List
To view the channel list, please ensure that the TV is set to either the analogue or digital source and no menus or TV notifi cations are displayed.
1) Press [OK] on the remote control and the
channel list menu will appear.
2) Press LEFT / RIGHT arrow to fi lter desired channel types (Digital TV, Radio, All).
3) Scroll through the channel list by using buttons then press [OK] to view the channel that is currently highlighted.
4) Press [EXIT] to exit the channel list.
27
Page 28
USB Record - Freeview/Saorview
USB RECORD  FREEVIEW/SAORVIEW MODE
Built into this television is a USB record facility. This function is available in Freeview/Saorview mode when used in conjunction with a compatible USB memory stick or USB hard drive. The benefi ts of this are as follows:
Pause live TV and then playback, fast forward and rewind (up to live TV)
One button record, if you decide you want to record the current programme
Easy programmable recording from the 7 day TV Guide
Record TV and watch/listen back on your computer/laptop
Due to the nature of the product, it is necessary to use a high speed USB memory stick (as the TV reads from and writes to the memory stick at the same time, some memory sticks may not be suitable)
You can purchase high speed memory sticks from some computer stores, alternatively, we have a selection of tested and compatible memory sticks available to purchase directly from the helpline/website.
Minimum specifi cation - USB Memory Stick
Read Speed 80 MB/s (Mega Byte Per Second)
Write Speed 40 MB/s (Mega Byte Per Second)
If you wish to use a USB portable hard drive larger than 32GB, please refer to the FAQ section at the rear of this user guide.
Pause live TV (time shift)
Pausing Live TV is very simple.
- Press the play/pause button and the television will pause and the live
content will be recorded. To resume watching press play/pause again.
- Press fast forward to go forward in a recording (i.e. to skip adverts)
- Press fast rewind to go back in a recording (i.e. if you fast forwarded too
far)
Tip: When you switch the TV to standby or change channel the time shift memory is wiped. To restart time shift you must press play/pause button.
One button record
At any point in time you may decide to record the current channel that you are watching. To do this you need to press the red button highlighted below.
Tip: This television contains one TV tuner, therefore it can only record the channel you are watching or record one channel while the television is in standby mode.
Note: USB record function is only available in Freeview/Saorview TV mode. Due to copyright laws and illegal copying/recording it is not possible to record to/from any other input/output source.
28
Page 29
29
USB Mode/Media Player
USB MODE/MEDIA PLAYER
USB mode offers playback of various different types of content that you have saved on your USB Memory Stick.
On switching to USB source the below menu screen will appear. The content will be divided into Photo, Music, Movie and Text based on fi le type.
1) You can navigate through the menus using the scroll
to confi rm the item you wish to play/view press the [OK] button.
3) You can now access the item. Press OK to view.
buttons on the remote control,
2) Select the drive you require. (If your drive only has 1 partition you will only see 1 item).
4) Whilst viewing your media, you can control the item by using the remote control buttons (below) or by pressing (Info) to access the on-screen playback menu, you can now make your selection by using the and (OK) buttons on the remote control.
Fig.A
Tip: If you experience a playback issue, please ensure the fi les being used are the correct format (example - the picture plays but no sound) See technical specifi cation page for compatible fi le types
Note: USB extension cables are not recommended as they can cause a reduction in picture/audio quality and stoppages during play back of USB content.
29
Page 30
30
Page 31
General Information
FREQUENTLY ASKED QUESTIONS
General I would like to have louder
General Why are some options in the menu
General Can I stop my TV automatically
TV I have tuned in Digital TV but I
TV I have re-tuned my television but
VCR/DVD Recorder
Game Consoles I have connected my Playstation/
Game Consoles I have connected my Playstation/
System Lock I have changed the password
USB Mode I have inserted a USB Memory Key,
USB Mode Using a USB portable hard drive /
USB Record I cannot change the channel, access
sound by connecting additional speakers. For TV models with digital optical audio output.
unavailable and greyed out.
turning o after 4hrs?
am not receiving any or all of the channels and/or the channels I receive are breaking up.
when I switch it o it is not storing the channels.
I have connected the TV to my VCR or DVD Recorder via SCART but it is not recording.
Xbox to the TV via HDMI, but I am not receiving any pictures or sound on my TV
Xbox to the TV via Component cables (red, green & blue) but I am not receiving any sound.
on the television and now forgotten it.
but the TV does not recognise it.
larger than 32GB.
the menu or use the red button.
1) Use the 3.5mm headphone output and a 3.5mm to phono cable (available separately) to connect to an amplifi er/surround sound system. Please note this will deactivate the TV’s built in speakers.
2) Connect a digital optical audio cable from the TV’s digital optical audio output to your amplifi er/surround systems digital optical audio input.
Some options are only available in certain sources, i.e. HDMI. They are unavailable in the other sources where they have no a ect.
Yes, in the ‘Time’ menu settings, scroll down to Auto standby and select OFF.
1) Check you are in an area that can receive Freeview/Saorview, visit www.freeview.co.uk or www.saorview.ie
2) Check you are using an aerial that is able to receive a good digital signal. In most cases, you will need an outdoor digital hi-gain/wideband aerial. In areas that have excellent digital coverage, you may be able to use a loft type aerial but it is highly likely that you will also need to connect a booster between the back of the TV and the TV aerial wall socket. Unfortunately, to receive a good enough digital signal, it is not possible to use a portable/ indoor type aerial.
If the TV does not save the channels when you power it o , it’s likely the channel database has become corrupt.
1) Turn o the TV.
2) Remove the RF/Aerial cable from the rear of the TV and then turn the TV back on again.
3) Using the remote control, press Menu followed by 8-8-8-8 to enter the initial setup/ rst
time installation menu.
4) Press OK (let the TV run the full tuning process).
5) Once completed, turn o the TV, reconnect the RF/Aerial cable then turn the TV back on
again.
6) Repeat steps 3 & 4.
In addition to connecting via SCART, you should connect the aerial cable from the wall socket to your VCR/DVD Recorder and another aerial cable from the VCR/DVD Recorder to the TV.
1) Ensure the TVs’ source is set to HDMI.
2) Check your settings on your Playstation/Xbox are as per the Playstation/Xbox instruction manual.
Component cables only provide HD pictures. For the sound you will need to connect the red & white audio cables on the Playstation/Xbox to the red & white phono inputs (or mini AV input where  tted) on the rear of the TV. Please refer to the ‘Connections’ pages.
There is a master password of 4711, to gain access to the TV menu and reset the normal password.
Ensure the USB Memory Key is formatted to type FAT32.
If you wish to use a portable hard drive larger than 32GB, please note that it must be formatted to the FAT32  le system in order to operate on this TV. Windows XP/Vista computers are only capable of formatting up to 32GB, therefore, you will need a software programme/utility to format larger hard drives. Please refer to the website, www.umc-uk.co.uk, for more information.
During time shift you cannot change the channel, access the menu or use the red button.
USB Record When using the USB to record the
picture ‘breaks up’ or experience loss of sound.
Freeview HD I cannot access all Freeview
channels.
Freeview HD I cannot  nd the Freeview HD
channels.
Check the USB memory stick meets the minimum read speed requirements. Standard de nition channels require a read speed of 20 MB/s (Mega Byte per second) and a write
Speed of 6 MB/s (Mega Byte per second) HD channels require the read speed of 80 MB/s (Mega Byte per second) and a write speed of 40 MB/s (Mega Byte per second). USB 3.0 sticks should normally ne used where possible.
Some data channels for Freeview can only be obtained when the TV ‘s ethernet port is connected to your router.
Freeview HD channels found during tuning will be placed in channel positions above 100. For example, 101 (BBC1 HD), 102 (BBC2 HD) etc.
Page 32
General Information
TECHNICAL SPECIFICATION
Product  che
Supplier
Sharp
Model ID LC-32CHE5111K,
LC-32CHE5111KW
Energy e ciency class A+
Visible screen size (diagonal) 81 cm / 32 inches
On mode average power consumption 31.0 W
Annual energy consumption *1 45 kWh
Standby power consumption *2 <0.50 W
O mode power consumption
n/a
Screen resolution 1366 (H) x 768 (V)
*1: Energy consumption XYZ kWh per year, based on the power consumption of the television operating 4 hours per day for 365 days. The actual energy consumption will depend on how the television is used. *2: When the TV is turned o with the remote control/standby button and no function is active.
Additional technical information
RF 75 ohm Antenna / Analog / DVB
Inputs 3 x HDMI, 1 x SCART, 1 x VGA/PC, 2 x USB,
1 x RJ45 (Ethernet), 1 x 3.5mm jack for PC audio input,
1 x Mini Component/YPbPr,
1 x Mini Composite/Video & L/R Audio shared for
Composite/Video & Component/YPbPr,
Sound Outputs 1 x 3.5mm Headphone/Audio out, 1 x Digital Optical
Audio Out
Speaker / Ampli er Watts (RMS) 2 x 10 / 2 x 8
Voltage and power consumption 110 - 240V ~ 50/60Hz
31/45/70 (home mode/standard/max)
(<0.5W in Standby)
Dimensions including stand (mm)
Net weight (Kgs) 4.5
Wall Mounting VESA 200 x 100 (mm)
733W x 467H x 160D
32
Page 33
33
General Information
TECHNICAL SPECIFICATION
Product  che
Supplier
Model ID LC-32CFE5111K,
Energy e ciency class A+
Visible screen size (diagonal) 81 cm / 32 inches
On mode average power consumption 31.0 W
Annual energy consumption *1 45 kWh
Standby power consumption *2 <0.50 W
O mode power consumption n/a
Screen resolution 1920 (H) x 1080 (V)
*1: Energy consumption XYZ kWh per year, based on the power consumption of the television operating 4 hours per day for 365 days. The actual energy consumption will depend on how the television is used. *2: When the TV is turned o with the remote control/standby button and no function is active.
Sharp
LC-32CFE5111KW
Additional technical information
RF 75 ohm Antenna / Analog / DVB
Inputs 3 x HDMI, 1 x SCART, 1 x VGA/PC, 2 x USB,
1 x RJ45 (Ethernet), 1 x 3.5mm jack for PC audio input,
1 x Mini Component/YPbPr,
1 x Mini Composite/Video & L/R Audio shared for
Composite/Video & Component/YPbPr,
Sound Outputs 1 x 3.5mm Headphone/Audio out, 1 x Digital Optical
Audio Out
Speaker / Ampli er Watts (RMS) 2 x 10 / 2 x 8
Voltage and power consumption 110 - 240V ~ 50/60Hz
31/45/70 (home mode/standard/max)
(<0.5W in Standby)
Dimensions including stand (mm)
Net weight (Kgs) 4.5
Wall Mounting VESA 200 x 100 (mm)
733W x 467H x 160D
33
Page 34
General Information
TECHNICAL SPECIFICATION
Product  che
Supplier
Sharp
Model ID LC-40CFE5111K
Energy e ciency class A+
Visible screen size (diagonal) 100 cm / 40 inches
On mode average power consumption 45.0 W
Annual energy consumption *1 66 kWh
Standby power consumption *2 <0.50 W
O mode power consumption n/a
Screen resolution 1920 (H) x 1080 (V)
*1: Energy consumption XYZ kWh per year, based on the power consumption of the television operating 4 hours per day for 365 days. The actual energy consumption will depend on how the television is used. *2: When the TV is turned o with the remote control/standby button and no function is active.
Additional technical information
RF 75 ohm Antenna / Analog / DVB
Inputs 3 x HDMI, 1 x SCART, 1 x VGA/PC, 2 x USB,
1 x RJ45 (Ethernet), 1 x 3.5mm jack for PC audio input,
1 x Mini Component/YPbPr,
1 x Mini Composite/Video & L/R Audio shared for
Composite/Video & Component/YPbPr,
Sound Outputs 1 x 3.5mm Headphone/Audio out, 1 x Digital Optical
Audio Out
Speaker / Ampli er Watts (RMS) 2 x 10 / 2 x 8
Voltage and power consumption 110 - 240V ~ 50/60Hz
45/65/80W (home mode/standard/max)
(<0.5W in Standby)
Dimensions including stand (mm)
Net weight (Kgs) 7
Wall Mounting VESA 200 x 200 (mm)
906W x 554H x 184D
34
Page 35
35
General Information
TECHNICAL SPECIFICATION
Product  che
Supplier
Model ID LC-43CFE5111K
Energy e ciency class A+
Visible screen size (diagonal) 109 cm / 43 inches
On mode average power consumption 41.0 W
Annual energy consumption *1 60 kWh
Standby power consumption *2 <0.50 W
O mode power consumption n/a
Screen resolution 1920 (H) x 1080 (V)
*1: Energy consumption XYZ kWh per year, based on the power consumption of the television operating 4 hours per day for 365 days. The actual energy consumption will depend on how the television is used. *2: When the TV is turned o with the remote control/standby button and no function is active.
Sharp
Additional technical information
RF 75 ohm Antenna / Analog / DVB
Inputs 3 x HDMI, 1 x SCART, 1 x VGA/PC, 2 x USB,
1 x RJ45 (Ethernet),
1 x 3.5mm jack for PC audio input,
1 x Mini Component/YPbPr,
1 x Mini Composite/Video & L/R Audio shared for
Composite/Video & Component/YPbPr,
Sound Outputs 1 x 3.5mm Headphone/Audio out, 1 x Digital Optical
Audio Out
Speaker / Ampli er Watts (RMS) 2 x 10 / 2 x 8
Voltage and power consumption 110 - 240V ~ 50/60Hz
41/65/80W (home mode/standard/max)
(<0.5W in Standby)
Dimensions including stand (mm)
Net weight (Kgs) 8
Wall Mounting VESA 400 x 200 (mm)
966W x 596H x 184D
35
Page 36
General Information
TECHNICAL SPECIFICATION
Product  che
Supplier
Sharp
Model ID LC-49CFE5001K
Energy e ciency class A+
Visible screen size (diagonal) 125 cm / 49 inches
On mode average power consumption 67.0 W
Annual energy consumption *1 98 kWh
Standby power consumption *2 <0.50 W
O mode power consumption n/a
Screen resolution 1920 (H) x 1080 (V)
*1: Energy consumption XYZ kWh per year, based on the power consumption of the television operating 4 hours per day for 365 days. The actual energy consumption will depend on how the television is used. *2: When the TV is turned o with the remote control/standby button and no function is active.
Additional technical information
RF 75 ohm Antenna / Analog / DVB
Inputs 3 x HDMI, 1 x VGA/PC, 2 x USB, 1 x RJ45 (Ethernet),
1 x 3.5mm jack for PC audio input,
1 x Mini Component/YPbPr,
1 x Mini Composite/Video & L/R Audio shared for
Composite/Video & Component/YPbPr,
Sound Outputs 1 x 3.5mm Headphone/Audio out, 1 x Digital Optical
Audio Out
Speaker / Ampli er Watts (RMS) 2 x 10 / 2 x 8
Voltage and power consumption 110 - 240V ~ 50/60Hz
67/95/110W (home mode/standard/max)
(<0.5W in Standby)
Dimensions including stand (mm)
Net weight (Kgs) 11.4
Wall Mounting VESA 200 x 200 (mm)
1104W x 688H x 229D
36
Page 37
37
General Information
TECHNICAL SPECIFICATION
Product  che
Supplier
Model ID LC-50CFE5101K
Energy e ciency class A+
Visible screen size (diagonal) 127 cm / 50 inches
On mode average power consumption 58.0 W
Annual energy consumption *1 85 kWh
Standby power consumption *2 <0.50 W
O mode power consumption n/a
Screen resolution 1920 (H) x 1080 (V)
*1: Energy consumption XYZ kWh per year, based on the power consumption of the television operating 4 hours per day for 365 days. The actual energy consumption will depend on how the television is used. *2: When the TV is turned o with the remote control/standby button and no function is active.
Sharp
Additional technical information
RF 75 ohm Antenna / Analog / DVB
Inputs 3 x HDMI, 1 x VGA/PC, 2 x USB, 1 x RJ45 (Ethernet),
1 x 3.5mm jack for PC audio input,
1 x Mini Component/YPbPr,
1 x Mini Composite/Video & L/R Audio shared for
Composite/Video & Component/YPbPr,
Sound Outputs 1 x 3.5mm Headphone/Audio out, 1 x Digital Optical
Audio Out
Speaker / Ampli er Watts (RMS) 2 x 10 / 2 x 8
Voltage and power consumption 110 - 240V ~ 50/60Hz
58/80/100W (home mode/standard/max)
(<0.5W in Standby)
Dimensions including stand (mm)
Net weight (Kgs) 12.1
Wall Mounting VESA 200 x 200 (mm)
1130W x 700H x 215D
37
Page 38
General Information
TECHNICAL SPECIFICATION
Product  che
Supplier
Sharp
Model ID LC-50CFE5111K
Energy e ciency class A+
Visible screen size (diagonal) 127 cm / 50 inches
On mode average power consumption 58.0 W
Annual energy consumption *1 85 kWh
Standby power consumption *2 <0.50 W
O mode power consumption n/a
Screen resolution 1920 (H) x 1080 (V)
*1: Energy consumption XYZ kWh per year, based on the power consumption of the television operating 4 hours per day for 365 days. The actual energy consumption will depend on how the television is used. *2: When the TV is turned o with the remote control/standby button and no function is active.
Additional Technical Information
RF 75 ohm Antenna / Analog / DVB
Inputs 3 x HDMI, 1 x SCART, 1 x VGA/PC, 2 x USB,
1 x RJ45 (Ethernet), 1 x 3.5mm jack for PC audio input,
1 x Mini Component/YPbPr,
1 x Mini Composite/Video & L/R Audio shared for
Composite/Video & Component/YPbPr,
Sound Outputs 1 x 3.5mm Headphone/Audio out, 1 x Digital Optical
Audio Out
Speaker / Ampli er Watts (RMS) 2 x 10 / 2 x 8
Voltage and power consumption 110 - 240V ~ 50/60Hz
58/80/100W (home mode/standard/max)
(<0.5W in Standby)
Dimensions including stand (mm)
Net weight (Kgs) 12.1
Wall Mounting VESA 200 x 200 (mm)
1130W x 700H x 215D
38
Page 39
39
General Information
TECHNICAL SPECIFICATION
Compatible fi les in USB Mode
Media File Ext.
.mpg/.mpeg
/.dat
.ts/.trp/.tp/.
m2ts
.vob MPEG-2
.mp4
.rm/.rmvb Rm codec
Movie
Music
Photo
.mkv
.avi
Motion JPEG JPEG
.asf,wmv VC1
.flv/.swf
.mp3 --
.wma/.asf --
.ogg -- OGG Sample Rate: ~48KHz
.m4a/.aac -- AAC HEAAC
.jpg/
.jpeg
.bmp BMP
.png
Video Decoder
Video Audio
MPEG-1, MPEG-2
MPEG-2, H.264,VC1,AVS
MPEG-4, Xvid, H.264
MPEG-1, MPEG-2, MPEG-4,
H.264
MPEG-2, MPEG-4,
Xvid, H.264
H.264, AVC, Sorenson
H.263
Progressive JPEG Max Resolution: 1024×768
Baseline JPEG
Non-Interlaced
Interlaced Max Resolution: 1200×800
MP3, WMA,AAC,
LPCM,DTS(DMP)
IMA-aDPCM/MS-A
AAC, LPCM,
DPCM,LBR(cook),
AC3, E-AC3
G711A/mu-law
MPEG1/2 (Layer1
Layer2Layer3)
WMA
WMA pro
MP3, WMA,
Remark
Max Solution: 1920×1080
Max Data Rate: 40 Mbps
Max Solution: 640×480
Max Data Rate: 10 Mbps
Max Solution: 1920×1080
Max Data Rate: 40 Mbps
Sample
Rate: 16KHz~48KHz
BitRate: 32K~448Kbps
BitRate: 128Kbps~320Kbps
Sampling rate : 8KHz-48KHz
BitRate: <768Kbps
Sampling rate : ~96KHz
Sample Rate: 8K~48KHz
Bit Rate: 24K~384Kbps
Max Resolution:
1920×8×1088×8
Max Resolution:
9600×6400
Max Resolution:
9600×6400
39
Page 40
40
Page 41
41
41
Page 42
SHA-MAN-0012
Loading...