Sharp LC-40LE360X, LC-32LE360X Operation Manual

MODEL

LC-32LE360X
LC-40LE360X

LED BACKLIGHT TV

OPERATION MANUAL

LC-3240LE360X_EN_G268.indd iLC-3240LE360X_EN_G268.indd i 8/5/2014 4:41:00 PM8/5/2014 4:41:00 PM

LC-3240LE360X_EN_G268.indd iiLC-3240LE360X_EN_G268.indd ii 8/5/2014 4:41:01 PM8/5/2014 4:41:01 PM

- 1

ENGLISH

Dear SHARP customer

Thank you for your purchase of the SHARP LCD colour TV product. To ensure safety and many
years of trouble-free operation of your product, please read the Important Safety Precautions
carefully before using this product.

Supplied accessories

Remote control unit

“AAA” size battery (g2)

Operation manual

Safety restrains Stand unit

Screws for clamps Clamps

A963

-Fe-

14YO1A

Stand base

Screws (g 8)

Supporting post

Important Safety Precautions

• Stand base must be attached to prevent the TV set from falling down and cause injuries.

• Cleaning — Unplug the AC cord from the AC outlet before cleaning the product. Use a soft damp cloth to clean the product.
Do not use liquid cleaners, aerosol cleaners or chemical cloth to clean it, as such materials may damage the product.

• Water and moisture — Do not use the product near water, such as bathtub, washbasin, kitchen sink, laundry tub, swimming
pool and in a wet basement.

• Do not place vases or any other water-fi lled containers on this product.
The water may spill onto the product causing fi re or electric shock.

• Stand — Do not place the product on an unstable cart, stand, tripod or table. Doing so can cause the product to fall, resulting
in serious personal injuries as well as damage to the product. Use only a cart, stand, tripod, bracket or table recommended
by the manufacturer or sold with the product. When mounting the product on a wall, be sure to follow the manufacturer’s
instructions. Use only the mounting hardware recommended by the manufacturer.

• When relocating the product placed on a cart, it must be moved with utmost care. Sudden stops, excessive force and uneven
fl oor surface can cause the product to fall from the cart.

• Ventilation — The vents and other openings in the cabinet are designed for ventilation. Do not cover or block these vents and
openings since insuffi cient ventilation can cause overheating and/or shorten the life of the product. Do not place the product
on a bed, sofa, rug or other similar surface, since they can block ventilation openings. This product is not designed for built-in
installation; do not place the product in an enclosed place such as a bookcase or rack, unless proper ventilation is provided or
the manufacturer’s instructions are followed.

• The LCD panel used in this product is made of glass. Therefore, it can break when the product is struck forcefully or with a
sharp object. If the LCD panel is broken, be careful not to be injured by broken glass.

• Heat sources — Keep the product away from heat sources such as radiators, heaters, stoves and other heat-generating
products (including amplifi ers).

• To prevent fi re, never place any type of candle or naked fl ames on the top or near the TV set.

• To prevent fi re or shock hazard, do not place the AC power cord under the TV set or other heavy items.

• Do not place heavy objects on this product or stand on it. Doing so could cause injury if the product overturns. Take special
care near children and pets.

• The LCD panel is a very high technology product with 1,049,088 (only for LC-32LE360X)/2,073,600 (only for LC-40LE360X)
pixels, giving you fi ne picture details.
Due to the very large number of pixels, occasionally a few non-active pixels may appear on the screen as a fi xed point of blue,
green or red.
This is within product specifi cations and does not constitute a fault.

• Precautions when transporting the TV

When transporting the TV, never carry it by holding or otherwise putting pressure onto the display. Be sure to always carry the

TV by two people holding it with two hands — one hand on each side of the TV.

• Do not display a still picture for a long time, as this could cause an afterimage to remain.

• Install the product on the place where the AC cord can be unplugged easily from the AC outlet or from the AC INPUT terminal
on the rear of the product.

• If a television is not positioned in a suffi ciently stable location, it can be potentially hazardous due to falling. Many injuries,
particularly to children, can be avoided by taking simple precautions such as:

• Using cabinets or stands recommended by the manufacturer of the television.

• Only using furniture that can safely support the television.

• Ensuring the television is not overhanging the edge of the supporting furniture.

• Not placing the television on tall furniture (for example, cupboards or bookcases) without anchoring both the furniture and

the television to a suitable support.

• Not standing the televisions on cloth or other materials placed between the television and supporting furniture.

• Educating children about the dangers of climbing on furniture to reach the television or its controls.

Contents

Dear SHARP customer ......................................................1

Supplied accessories ........................................................ 1

Important Safety Precautions ..........................................1

Important information ....................................................... 2

Trademarks ........................................................................ 2

Quick Reference ................................................................ 2

Attaching the stand ........................................................... 2

Preparation ........................................................................ 3

Antenna connection ..........................................................3

Connecting external devices.............................................. 3

Part names and functions .................................................4

Remote control unit ........................................................... 4

TV (Front) ..........................................................................4

TV (Rear) ........................................................................... 5

Watching TV ....................................................................... 5

Turning the TV on/off .........................................................5

Initial auto installation......................................................... 5

Checking Signal information .............................................. 5

Auto installation ................................................................. 5

Programme setup .............................................................6

On-Screen Display Menu .................................................. 6

Selecting a preset AV mode .............................................. 6

Menu operation ................................................................. 6

Picture menu .....................................................................7

Audio menu....................................................................... 7

ECO menu ........................................................................7

Setup menu ......................................................................8

Option menu ..................................................................... 9

Direct Button Operation ..................................................10

Programme Guide ........................................................... 10

Info ................................................................................. 10

ATV/DTV/RADIO buttons ................................................10

Switching the analogue audio format ...............................11

EPG ................................................................................ 11

Colour adjustment and still image ....................................12

ECO mode ...................................................................... 12

Using a Smartphone with the TV ...................................12

Teletext function .............................................................. 12

Using a PC ........................................................................13

PC compatibility chart .....................................................13

PC Control of the TV .......................................................13

RS-232C commands list ................................................. 13

USB Media Player ............................................................ 14

Appendix .......................................................................... 15

Specifi cations .................................................................. 16

Protection against overturning ......................................16

Dimensional drawings..................................................... 17

CLEARING THE PASSWORD .......................................... 18

Page Page

NOTE

• The illustration and on-screen displays in this operation manual are for explanation purposes and may vary slightly from the
actual operation.

• Some features differ depending on the selected country.

LC-3240LE360X_EN_G268.indd 1LC-3240LE360X_EN_G268.indd 1 8/5/2014 4:41:01 PM8/5/2014 4:41:01 PM

- 2

Important information

This product qualifi es for ENERGY STAR when “HOME” is selected for “TV Location”.
Setting “TV Location” to “HOME” allows the TV to achieve an energy-saving status for household use.

Trademarks

• The terms HDMI and HDMI High-Defi nition Multimedia Interface, and the HDMI Logo are trademarks or registered
trademarks of HDMI Licensing LLC in the United States and other countries.

• TruSurround HD, SRS and the symbol are trademarks of SRS Labs, Inc.
TruSurround HD technology is incorporated under license from SRS Labs, Inc.

• SRS TruSurround HD™ creates an immersive, feature-rich surround sound experience from two speakers, complete with
rich bass, high frequency detail and clear dialog.

• Manufactured under license from Dolby Laboratories. Dolby and the double-D symbol are trademarks of Dolby
Laboratories.

• Products that have earned the ENERGY STAR® are designed to protect the environment through energy effi ciency.

• DivX®, DivX Certifi ed® and associated logos are trademarks of Rovi Corporation or its subsidiaries and are used under
license.

• ABOUT DIVX VIDEO: DivX® is a digital video format created by DivX, LLC, a subsidiary of Rovi Corporation. This is an
offi cial DivX Certifi ed

®

device that has passed rigorous testing to verify that it plays DivX video. Visit divx.com for more

information and software tools to convert your fi les into DivX videos.

• ABOUT DIVX VIDEO-ON-DEMAND: This DivX Certifi ed

®

device must be registered in order to play purchased DivX Video­on-Demand (VOD) movies. To obtain your registration code, locate the DivX VOD section in your device setup menu. Go to
vod.divx.com for more information on how to complete your registration.

• MHL, the MHL Logo, and Mobile High-Defi nition Link are trademarks or registered trademarks of MHL, LLC in the United
States and other countries.

Quick Reference

Attaching the stand

• Before attaching (or detaching) the stand, unplug the AC cord from the AC outlet.

• Before performing work spread cushioning over the base area to lay the TV on. This will prevent it from being damaged.

1

Confi rm the screws supplied with the TV.

Screws (m8)

2

Fix the supporting post into the holes on the rear of the TV. (1)
Insert and tighten the four screws into the holes. (2)

3

DC5V 0

.
9
A

MHL

2

USB

1

D
C
5
V

1.5A

POWER

5

8

AU
D

IO
I
N

RS-232C IOIOI

2

1

Soft cushion

3

Insert the stand base to the stand post on the bottom of the TV. (3)

4

Insert and tighten the screws into the holes on the rear of the TV. (4)

Insert this points

3

DC5V 0.9A

MHL

2

USB 1

DC5V 1.5A

POW

ER

5

8

AUDIO IN

RS-232C IOIOI

3

4

NOTE

• To detach the stand, perform the steps in reverse order.

CAUTION

• Do not attach or detach the stand without holding it.
Doing so can cause the stand to fall, resulting in serious personal injuries as well as damage to the stand.

• The illustrations used throughout this manual are based on LC-40LE360X.

LC-3240LE360X_EN_G268.indd 2LC-3240LE360X_EN_G268.indd 2 8/5/2014 4:41:01 PM8/5/2014 4:41:01 PM

- 3

Preparation

Connecting a DVD player/Digital TV STB (Set Top Box)

You can use the INPUT 1 (HDMI/ARC)/INPUT 2 (HDMI/MHL)/INPUT 3 (HDMI)/INPUT 4 (HDMI)/INPUT 5 (HDMI)
or INPUT 6 terminals when connecting to a DVD player/Digital TV STB (Set Top Box) and other audiovisual
equipment.

When using HDMI-certifi ed cable (commercially
available)

When using component cable (commercially
available)

USB 1

DC5
V

1.
5
A

D
C
5V

0
.9
A

MH
L

3

4

5

2

PO
WE

R

O
U
TPU

T

DC

5
V

1.5A

INPU
T
4

INPU
T 5

US

B
2

DC

5
V 0.5A

5

8

A
UDIO

I
N

DI
GITAL
AUDIO
OU
T

PUT

AN
ALO

GU
E

RGB

(PC)

ARC

RS-232C I

O
I
OI

8

I
N
PUT 8

1

INPU
T

1

6

I
N
PU
T
6

7

I
N
P
U
T 7

AUD
IO

OU
T

R

- A
UD
I
O

- L

R - A
UD

IO

- L

R

- A
U

DIO

­L

VID
EO/Y

P

B

(C

B

)
P

R

(C

R

)

CO
MP

O
N
E
N
T/AV INPU

T

VIDEO

5

INPUT 5

6

INPUT 6

R - AUDIO - L

VIDEO/Y

P

B

(C

B

)

P

R

(C

R

)

COMPONENT/AV INPUT

DVD player/
Digital TV STB
(Set Top Box)

DVD player/
Digital TV STB
(Set Top Box)

Connecting a PC

You can use the INPUT 8 PC terminals when
connecting to a PC of ANALOGUE RGB terminal.

You can use the INPUT 5 (HDMI) terminal when
connecting to a PC of DIGITAL DVI terminal.

USB 1

D
C5V 1.5A

DC5V 0.9A

MHL

3

4

5

2

POWER

OUTPU

T

DC5V 1.5A

INPUT 4

INPU

T 5

USB 2

DC5V
0

.5
A

5

8

AUDIO IN

DIGITAL
AUDIO
OUTPUT

ANALOGUE

RGB (PC)

ARC

RS-232C IOI

OI

8

INPUT 8

1

INPUT 1

6

INPUT 6

7

INPUT

7

AUDIO OUT

R - AUDIO

- L

R - A
UDIO

- L

R - AUDIO

- L
VIDEO/Y

P

B

(C

B

)
P

R

(C

R

)

COMPON

ENT/AV INPU

T

VIDEO

5

8

AUDIO IN

5

INPUT 5

5

8

AUDIO IN

ANALOGUE

RGB (PC)

ARC

8

INPUT 8

1

INPUT 1

ARC

INPUT 1

ANALOGUE

PC

ANALOGUE RGB

DIGITAL DVI

PC

Connecting a USB device

Connect a USB device to the TV.

Using Digital Audio Output

It is possible to output audio through the DIGITAL
AUDIO OUTPUT terminal. PCM audio outputs from
the terminal.

USB 1

DC5V 1.5A

DC5V 0.9A

MHL

3

4

5

2

POWER

OUTPU

T

DC5V 1.5A

INPUT 4

INPU

T 5

USB 2

DC5V 0.5A

5

8

AUDIO IN

D
IGITAL
AUDIO
OUTPUT

ANALOG

UE

RGB (PC)

ARC

RS-232C IOI

OI

8

INPUT 8

1

INPUT 1

6

INPUT 6

7

INPUT 7

AUDIO OUT

R - AUDIO

- L

R - A

UDIO

- L

R - AUDIO

- L
VIDEO/Y

P

B

(C

B

)
P

R

(C

R

)

COMPON

ENT/AV INPU

T

VIDEO

DIGITAL

AUDIO

OUTPUT

To optical digital input of
external audio devices

Optical fi bre cable
(commercially available)

CAUTION

• Do not disconnect a USB device from the TV while transferring fi les, when a screen is in “USB” mode.

NOTE

• The DIGITAL AUDIO OUTPUT terminal usually outputs the same audio from the speakers. (The audio of the content you are
viewing is output from the terminal.)

• The DIGITAL AUDIO OUTPUT terminal does not output some signals, depending on devices and software.

• The illustrations used throughout this manual are based on LC-40LE360X.

Antenna connection

Connect antenna cable to the antenna terminal

or

If your outdoor antenna uses a 75-ohm coaxial cable
with a standard DIN45325 plug (IEC 169-2), plug it into
the antenna jack at the rear of the set.

If your outdoor antenna uses a 300-ohm twin-lead fl at
feeder, connect a 300-ohm to 75-ohm impedance
converter and plug it into the antenna jack at the rear of
the set.

CAUTION

• TO PREVENT RISK OF ELECTRIC SHOCK, DO NOT TOUCH UN-INSULATED PARTS OF ANY CABLES WITH THE
AC CORD CONNECTED.

NOTE

• Place the TV close to the AC outlet, and keep the power plug within reach.

Connecting external devices

You can connect many types of external equipment to your TV, like a VCR, game console, camcorder, DVD
player, Digital TV STB (Set Top Box) and PC. To view external source images, select the input source from

INPUT on the remote control unit or INPUT on the TV.

CAUTION

• To protect all equipment, always turn off the TV before connecting to a VCR, game console, camcorder, DVD player, Digital
TV STB (Set Top Box), PC or other external equipment.

• Refer to the relevant operation manual (VCR, DVD player, etc.) carefully before making connections.

Connecting a VCR, game console or camcorder

A VCR, game console, camcorder and some other audiovisual equipment can be conveniently connected
using the INPUT 6 or INPUT 7 terminals.

When using component cable (commercially
available)

When using composite cable (commercially
available)

VCR/Game
console/
Camcorder

VCR/Game
console/
Camcorder

USB 1

DC5V 1.5A

DC5V 0.9A

MHL

3

4

5

2

PO
W

ER

OUT
P

UT

DC5V

1.5A

INPU
T 4

INPUT 5

USB
2

DC5V 0.5A

5

8

AUDIO IN

DIGITAL
AU
D
I
O
OUTPUT

ANA
LOGUE
RGB (

PC
)

AR

C

RS-2

32C IOIOI

8

INPU
T 8

1

IN
P
U
T 1

6

INPU

T 6

7

INPU
T 7

AU
D

I
O OUT

R

- AUD
IO -

L

R - AUDIO -

L

R

­A

U
DIO

- L
VIDEO/Y

P

B

(C

B

)
P

R

(C

R

)

COMPONE

NT/AV
I
NP

U
T

VIDEO

7

INPUT 7

R - AUDIO - L

VIDEO

6

INPUT 6

R - AUDIO - L

VIDEO/Y

P

B

(C

B

)

P

R

(C

R

)

COMPONENT/AV INPUT

6

INPUT 6

R - AUDIO - L

VIDEO/Y

P

B

(C

B

)

P

R

(C

R

)

COMPONENT/AV INPUT

(C)(C

)

or

LC-3240LE360X_EN_G268.indd 3LC-3240LE360X_EN_G268.indd 3 8/5/2014 4:41:03 PM8/5/2014 4:41:03 PM

- 4

Part names and functions

Inserting the batteries

Before using the TV for the fi rst time, insert two “AAA” size batteries (supplied). When the batteries become
depleted and the remote control fails to operate, replace the batteries with new “AAA” size batteries.

1

Open the battery cover.2Insert the two supplied “AAA” size batteries.3Close the battery cover.

• Place batteries with their terminals corresponding to the
(e) and (f) indications in the battery compartment.

CAUTION

• Batteries (battery pack or batteries installed) shall not be exposed to excessive heat such as sunshine, fi re or the like.

TV (Front)

POWER indicator

Light off Power off.
Lighted (Red) The TV is in standby mode.
Lighted (Green) The TV is on.

• The illustrations used throughout this manual are based on LC-40LE360X.

Remote control unit

DISPLAY

ATV/DTV

EPG

HDMI

GUIDE INFO RADIO

1
2

5

7

8

9

11

6

3

4

12
13

14

15

16

17

18

10

19

20

21

9 a/b/c/d (Cursor)

Select a desired item on the setting screen.

ENTER

Execute a command.

10 ATV/DTV

Press to access analogue and digital TV mode.

(See page 10.)

11 Colour (Red/Green/Yellow/Blue)

The coloured buttons are correspondingly used to select

the coloured items on the screen.
TELETEXT mode: Select a page. (See page 12.)

12 ECO

Reduce overall power consumption based on user

preferences. (See page 12.)

13 COLOUR ADJ. (FREEZE)

Freeze a motion picture on the screen and adjust the

colour tone of the still image. (See page 12.)

14 PHOTO

Display your pictures directly on the TV screen.

(See page 14.)

15 INPUT (INPUT SOURCE)

Select an input source.

16 CHr/CH

s

TV input mode: Select the channel.
(CHr) Increase the channel number.
(CH

s

) Decrease the channel number.

TELETEXT mode: Select a page. (See page 12.)

17 MENU

Display the menu screen.

18 MPX

Select the sound multiplex mode.

19 RETURN

MENU mode: Return to the previous menu screen.

20 m (TELETEXT), k (Reveal hidden for TELETEXT),

3

(Hold), [ (SUBTITLE for TELETEXT)

Use for TELETEXT mode. (See page 12.)

21 EPG

DTV mode: To display EPG (Electronic Programme Guide)

screen. (See pages 11 to 12.)

GUIDE
DTV mode: Display the programme channel list.

(See page 10.)

INFO
DTV mode: Display the programme information.

(See page 10.)

RADIO
Press to access RADIO mode. (See page 10.)

1 POWER (STANDBY/ON)

To switch the power on and off. (See page 5.)

2 SLEEP

Set the Sleep timer.

0 hr. 30 min. 1 hr. 00 min.

2 hr. 30 min.

1 hr. 30 min.

2 hr. 00 min.

Off

3 HDMI

Select the HDMI input mode.

4 0 – 9

Set the channel.
TELETEXT mode: Set the page. (See page 12.)

5 A (Flashback)

Press A to return to the previous selected channel or

external input mode.

6 DISPLAY

Display the channel or input information.

7 VOLk/VOL

l

Set the volume.
(VOLk) Increase the volume.
(VOLl) Decrease the volume.

8 e (Mute)

Press e s Mutes sound.
Press e again s Restores sound.
Mute will be cancelled after 30 minutes. However, the TV

will not suddenly output loud sound as the volume level
will be set to 0 automatically. Increase the volume level by
pressing VOLk.

LC-3240LE360X_EN_G268.indd 4LC-3240LE360X_EN_G268.indd 4 8/5/2014 4:41:11 PM8/5/2014 4:41:11 PM

- 5

Watching TV

Checking Signal information

If you install a DVB-T antenna for the fi rst time or
relocate it, you should adjust the alignment of the
antenna to receive a good reception while checking
the antenna setup screen.

ATV/DTVATV/DTV

1

Press MENU and the MENU screen displays.

2

Press c/d to select “ ” (Programme setup).

3

Press a/b to select “Digital setting”, and then
press ENTER.

4

Press a/b to select “Signal information”, and
then press ENTER.

• The “Signal information” screen will appear.

Auto installation

You can run auto installation again, even after setting
up the preset channels.

1

Press MENU and the MENU screen displays.

2

Press c/d to select “ ” (Programme setup).

3

Press a/b to select “Auto installation”, and then
press ENTER.
If you have already set the password, enter it here.

• See page 8 for setting a password.

4

Press a/b to select your country channels listed
on the screen, and then press ENTER.
Press a/b to select the desired language, and
then press ENTER.

*

Press a/b to select “DTV”, “ATV” or
“DTV + ATV”, and then press ENTER.

You do not need to do anything during the auto
search. Press MENU to exit.

*

NOTE

• In the setting of some country, selecting of “DTV”, “ATV” or
“DTV + ATV” may not be shown.

Turning the TV on/off

Turning on/off the power

• To turn on the power

Press POWER on the TV. (After a few seconds, an image

appears with sound.)

• To turn off the power

Switch it off by pressing POWER on the TV.

Standby mode

• To standby mode

If the TV is switched on, you can switch it to standby by

pressing POWER on the remote control.

• Switching on from standby

From standby, press POWER on the remote control.

NOTE

• If you are not going to use this TV for a long period of time,
be sure to remove the AC cord from the AC outlet.

• Minor power is consumed when the unit is in standby mode.

Initial auto installation

When the TV powers on for the first time after
purchase, the initial auto installation wizard appears.
Follow the menu and make the necessary settings
one after another.

1

Press POWER on the TV.

• The initial auto installation wizard appears.

2

Press a/b to select your country channels listed
on the screen, and then press ENTER.
Press a/b to select the desired language, and
then press ENTER.
Press a/b to select “HOME” or “STORE”, and
then press ENTER.

HOME:

• “STANDARD” will be the default value for the “AV mode”
setting.

STORE:

• “DYNAMIC (FIXED)” will be the default value for the
“AV mode” setting. If the “AV mode” is changed, the TV
will automatically switch back to “DYNAMIC (FIXED)”
when there is no further change to TV setting for 30
minutes.

• The confi rmation screen appears only when selecting
“STORE”. Press a/b to select “Yes” or “No”.

• To change the STORE mode to HOME mode, please
refer to page 9 to reset the unit.

* Press a/b to select “DTV”, “ATV” or

“DTV + ATV”, and then press ENTER.

• Auto installation will be executed.

• You do not need to do anything during the auto search.

• If you select “Others” country, some of DTV channel
may not tune properly.

Part names and functions

TV (Rear)

US

B 1

D
C

5
V

1.5A

D
C5V

0

.9A

MHL

3

4

5

2

POW

ER

OUTPUT
DC5V 1.5A

IN
PUT 4

IN
PUT 5

USB 2

DC5V 0.5A

5

8

A
U

D
I
O
I
N

D
IGITAL
AUD
I
O
OUT
PUT

A
N
A

LOGUE

RGB (PC)

ARC

R
S-2
3

2C IO
I
O

I

8

INPU

T
8

1

I

N
PUT

1

6

IN
PUT 6

7

IN
PUT 7

AUDIO

OUT

R - AUD

I
O

­ L

R ­AUDIO - L

R

­AUDIO -

L
VIDEO

/
Y
P

B

(C

B

)

P

R

(C

R

)

COM
PONENT/

A
V
I

NPUT

VIDEO

4

5

OUTPUT

DC5V 1.5A

INPUT 4

INPUT 5

USB 2

DC5V 0.5A

POWER

5

8

AUDIO IN

ANALOGUE

RGB (PC)

ARC

RS-232C IOIOI

8

INPUT 8

1

INPUT 1

DIGITAL

AUDIO

OUTPUT

6

INPUT 6

7

INPUT 7

AUDIO OUT

R - AUDIO - L

R - AUDIO - L

R - AUDIO - L

VIDEO/Y

P

B

(C

B

)

P

R

(C

R

)

COMPONENT/AV INPUT

VIDEO

USB 1

DC5V 1.5A

DC5V 0.9A

MHL

2

3

9

8

12

13

10

11

1

2

3

4

7 6 5

19

18

17

14 15 16

1 USB 1 terminal
2 INPUT 2 (HDMI/MHL) terminal
3 Headphone jack (

3.5 mm)

• The speakers do not output volume when
headphones are plugged in.

4 INPUT 3 (HDMI) terminal
5 OUTPUT terminal (For power output only)*

1

6 INPUT 4 (HDMI) terminal
7 INPUT 5 (HDMI) terminal*

2

8 USB 2 terminal
9 DIGITAL AUDIO OUTPUT terminal
10 INPUT 1 (HDMI/ARC) terminal
11 INPUT 8 terminal*

2

12 AUDIO IN terminal
13 Antenna input terminal
14 AUDIO OUT terminals
15 INPUT 7 terminals
16 INPUT 6 terminals
17 RS-232C terminal
18 POWER (On/Off) button
19 Keypad control

Keypad control

JOG-KEY

BASIC

FUNCTION

FUNCTION

DURING MENU

r

CH UP

r

*

s

CH DOWN

s

*

+

VOL UP

+

*

–

VOL DOWN

–

*

b

(BELOW 1 SEC)

INPUT SELECT/ENTER

b

(1 SEC

AND OVER)

MENU

RETURN/MENU
EXIT

* Repeat keys

*

1

This terminal can supply power for dongles. (Availability is depend on the specifi cation of dongle).

*

2

The INPUT 5 and INPUT 8 terminals can both use the same analogue audio input terminal. However, the proper item must

be selected in the “Audio select” menu. (See page 9.)

• The illustrations in this operation manual are for explanation purposes and may vary slightly from the actual operations.

• The illustrations used throughout this manual are based on LC-40LE360X.

LC-3240LE360X_EN_G268.indd 5LC-3240LE360X_EN_G268.indd 5 8/5/2014 4:41:11 PM8/5/2014 4:41:11 PM

- 6

Watching TV

H

Manual adjust

You can set some channel items manually.

1

Repeat steps 1 to 3 in Auto search.

2

Press

a

/

b

t

o select “Manual adjust”, and then

press ENTER.

3

Press a/b to select your desired item, and then
press c/d to adjust the settings.

Item Description

Storage to
[1~99]

Save programme to your desired
channel number. Press R to save.

Sound system

Select the optimum sound system
(Broadcasting system) to receive.
(B/G, D/K, I, M)

Colour system

Select the optimum colour system to
receive. (PAL, SECAM, NTSC)

Current CH

Select the channel you want to edit.

• Selected channel will be automatically
refl ected in the background.

Search

Start searching from current channel.

• Instead of pressing c/d to adjust the
frequency, you can set by directly entering
the frequency number of the channel with
0 — 9.

Press R to save.

Fine-tune

Tune the frequency of the stored
channel to your desired position.

• Adjust while checking the background
picture as a reference.

Press R to save.

NOTE

• The frequency shown below the On-Screen Display shows
the real-time frequency of the displayed channel.

H

Programme edit

Use this menu to set up a channel individually.

1

Repeat steps 1 to 3 in Auto search.

2

Press a/b to select “Programme edit”, and then
press ENTER.

3

Press a/b to select the channel you want to
edit, and then press 1 to 5 on the remote control
if necessary or press RETURN to exit.

• As you toggle down the channels, each channel is
immediately refl ected in the background when you press
ENTER.

1

(

Erase programme)

Channels can be erased individually.
Press 1 to erase the selected channel.

2

(Label)

You can change channel names individually.
Maximum 5 alphanumerics can be input.
Press 2 to start labelling.
Press a/b/c/d to select a character, and
then press

2

again or ENTER to save.

3

(Sort)

Channel positions can be sorted freely.
Press 3 to select the channel you want to move.
Press a/b to move it to the desired position,
and then press

3 again or ENTER

to save.

4

(

Skip)

Channels with “Skip” set to “On” are passed
over when using CHr/s even if selected
while watching the image from the TV.
Press 4 to skip the selected channel.
Press 4 again to cancel the skip.

5

(Lock)

You can block the viewing of any selected
channel.
Password must be set fi rst to allow “

” to

function.

• See page 8 for setting a password.

Press 5 to lock the selected channel.
Press 5 again to unlock the locked channel.

On-Screen Display Menu

Selecting a preset AV mode

“AV mode” gives you several viewing options to
choose from to best match the system environment,
which can vary due to factors like room-brightness,
type of programme watched or the type of image
input from external equipment.

1

Press MENU and the MENU screen displays.

2

Press c/d to select “ ” (Picture) and “ ”
(Audio).

3

Press a/b to select “AV mode”, and then press

ENTER.

Selected item Description

STANDARD*

1

For a highly defi ned image in a normally
bright room.

MOVIE

For a movie.

PC

For PC (Available only when inputting
an HDMI or PC signal).

DYNAMIC

For a clear-cut image emphasising high
contrast for sports viewing.

DYNAMIC
(FIXED)

Changes the image and sound settings
to the factory preset values. No
adjustments are allowed.

NOTE

*1 ENERGY STAR qualifi cation is based on AV mode

“STANDARD (ENERGY STAR)”.

• You can select a different AV mode item for each input
mode. (For example, select STANDARD for TV input and
DYNAMIC for VIDEO input.)

Menu operation

1

Press MENU and the MENU screen displays.

2

Press c/d to select the desired menu.
(Programme setup, Picture, Audio, ECO, Setup,
Option)

3

Press a/b to select the desired menu item.
Press ENTER to proceed if necessary.

4

Press a/b or c/d to select the desired item or
adjust the item to the desired level. Press ENTER
if necessary.

5

Press RETURN as necessary to return to the
previous MENU. Press MENU to exit the MENU.

Programme setup

Digital setting

You can reconfi gure DTV services settings
automatically or manually.

1

Press MENU and the MENU screen displays.

2

Press c/d to select “ ” (Programme setup).

3

Press a/b to select “Digital setting”, and
then press ENTER. If you have already set the
password, enter it here.

• See page 8 for setting a password.

4

Press a/b to select the desired menu item, and
then press ENTER.

H

Auto search

Use this menu to add new services automatically
after auto installation has been completed.

H

Manual search

Add new services within a specifi ed frequency band.

• Press c/d to select the frequency and then press ENTER.

Analogue setting

You can reconfi gure the TV channel settings
automatically or manually using Auto search,
Manual adjust or Programme edit.

H

Auto search

You can also automatically search by performing
the procedure below. This is the same function as
programme auto search in auto installation.

1

Press MENU and the MENU screen displays.

2

Press c/d to select “ ” (Programme setup).

3

Press a/b to select “Analogue setting”, and
then press ENTER. If you have already set the
password, enter it here.

• See page 8 for setting a password.

4

Press a/b to select “Auto search”, and then
press ENTER.
You do not need to do anything during the auto
search. Press MENU to exit.

LC-3240LE360X_EN_G268.indd 6LC-3240LE360X_EN_G268.indd 6 8/5/2014 4:41:12 PM8/5/2014 4:41:12 PM

- 7

Selected item Description

Cinema 16:9

For 16:9 letterbox pictures. Bars may
appear on the top and bottom with
some programmes.

Cinema 14:9

For 14:9 letterbox pictures. Bars may
appear on the top and bottom with
some programmes.

Dot by Dot

Displays an image with the same
number of pixels on the screen (only
when receiving a 1080i/1080p signal for
LC-40LE360X).

Underscan

Display with an Underscan image only
when receiving a 720p/1080p/1080i
signal (only for LC-32LE360X)/a 720p
signal (only for LC-40LE360X). Display
with the High-Defi nition image adjusted
optimally. Noise may appear on the edge
of the screen with some programmes.

Just scan

Keeps the original aspect ratio and
enlarges the picture as much as
possible.

Auto

Keeps the original aspect ratio based
on source information and enlarge the
picture as much as possible.

NOTE

• Some picture sizes may not be displayable depending on
the input signal.

• “Auto”, “16:9”, “4:3” and “Just scan” can be selected only
during video playback in “Movie mode” of USB Media
Player.

H

Eagle View*

“Eagle View” technology produces a sharp picture
from the original moving picture. (“On”, “Off”)

H

AquoMotion Lite*

“AquoMotion Lite” technology provides superior
solutions for display picture quality removing motion
blur. (“Advanced”, “High”, “Off”)

*

NOTE

• This effect is greater on fast moving images.

• This function will have no effect in the following cases.

1) The type of signal received is a PC signal.

2) An OSD is being displayed.

3) Teletext is activated.

• If images appear blurred or fl ickering, set to “Off”.

Audio menu

H

Sound adjust

Selected item

c

button

d

button

Treble

For weaker treble For stronger treble

Bass

For weaker bass For stronger bass

Balance

Decrease audio
from the right
speaker

Decrease audio
from the left
speaker

H

SRS TruSurround (TS) HD™

You can enjoy SRS TruSurround HD™ sound, the
same as you were in movie theatre.

Using SRS TS HD on the menu screen

You can produce SRS TruSurround HD™ effects
from the “Audio” setting.

Selected item Description

On

SRS TruSurround HD™ creates a high
quality surround sound experience,
when watching DVD movies and TV
programmes broadcast in surround
sound.

Off

Outputs the normal sound.

H

Bass enhancer

This function allows you to enjoy bass-enhanced
sound.

Selected item

Description

On

Bass enhancer function is on.

Off

Outputs the normal sound.

NOTE

• If distorted bass sound is heard, set to “Off”.

H

Clear voice

This function emphasises speech against
background noise for greater clarity. (On, Off)

NOTE

• Clear voice only work when SRS TS HD is “On”.

• For resetting all “Sound adjust” items to the factory preset
values, press a/b to select “Reset”, press ENTER, press

a

/b to select “Yes”, and then press ENTER.

ECO menu

H

No signal off

You can set the TV to automatically power off in
about 15 minutes after the TV goes into a state of
receiving no programme signals. (Enable, Disable)

• Five minutes before the power shuts down, the remaining
time displays every minute.

NOTE

• When a TV programme fi nishes, and the TV receives signal
input, this function may not operate.

H

No operation off

You can set the TV to automatically power off when
no TV operation is performed for more than 3 hours.
(30 min., 3 hr., Disable)

• Five minutes before the power shuts down, the remaining
time displays every minute.

Picture menu

H

Picture adjust

Adjustment items

Selected item

c

button

d

button

Backlight

The screen dims

The screen
brightens

Contrast

For less contrast For more contrast

Brightness

For less brightness

For more brightness

Colour

For less colour
intensity

For more colour
intensity

Tint

Skin tones become
reddish

Skin tones become
greenish

Sharpness

For less sharpness

For more sharpness

NOTE

• “Picture adjust” cannot be changed during “DYNAMIC
(FIXED)” mode.

• For resetting all “Picture adjust” items to factory preset
values, press a/b to select “Reset”, press ENTER, press

a

/b to select “Yes”, and then press ENTER.

H

DNR (Digital Noise Reduction)

Reduces noise on screen and produces a clearer
video image. (Auto, High, Low, Off)

H

Wide mode

You can manually select the size of a picture
appeared on your screen.
Selectable picture size varies with the type of signal
received.
Press a/b while the wide mode menu displays on
the screen.

• As you toggle down the options, each mode is immediately
refl ected on the TV.

Selected item Description

Normal/4:3

For 4:3 “standard” pictures. A side bar
appears on each side.

Zoom 14:9

For 14:9 letterbox pictures. A thin side
bar appears on each side, and you may
also see bars on the top and bottom
with some programmes.

Panorama

In this mode the picture is progressively
stretched toward each side of the
screen.

Full/16:9

For 16:9 squeeze pictures.

On-Screen Display Menu

LC-3240LE360X_EN_G268.indd 7LC-3240LE360X_EN_G268.indd 7 8/5/2014 4:41:12 PM8/5/2014 4:41:12 PM

- 8

Selected item Description

Off

Cancel the blocking.

Age xx years

Select desired age to block.
(Example) If age 14 is selected,
programmes rated for ages of 15 or
more are blocked.

No block

Cancel the blocking.

General and
above (G)

Content is not offensive to most viewers.

Parental
guidance and
above (PG)

Content is such that parents may
not want their children to view the
programme.

Mature and
above (M)

Mature audience only. This programme
is specifi cally designed to be viewed by
adults and therefore may be unsuitable
for children under 15.

Mature adult
and above
(MA)

Mature adult only. This programme is
specifi cally designed to be viewed by
adults and therefore may be unsuitable
for children under 15.

Adult violence
and above (AV)

Not for children under age 15. Strong
elements of sex and/or violence.

Restricted and
above (R)

Not for children under age 18. Strong
elements of sex and/or violence.

Parental
guidance
recommended
and above
(PGR)

Programme is suited to more mature
viewers.

Adults only
and above
(AO)

Adults only. This programme contains
material of an adult nature handled
in such a way that is unsuitable for
children.

Block all

Block all programmes.

H

HDMI auto view (HDMI input mode only)

Selected item Description

Enable/
Disable

Set whether or not to use the Auto
Selection of WIDE MODE based on
signal recognition received from the
HDMI signal.

H

Link operation

Using the HDMI CEC (Consumer Electronics Control)
protocol, with Link operation you can interactively
operate compatible system equipment (e.g. DVD),
by connecting the link operation-compatible devices
with HDMI-certifi ed cables to the TV.
Link operation allows you to operate the HDMI­connected equipment and the TV by using a single
remote control unit. (On, Off)

H

Audio return channel

If this function is set to “Auto”, the TV can send
audio data for video content shown on the TV
to a connected audio device with just one ARC­compatible cable. Using this function eliminates the
need to use a separate digital or analogue audio
cable. (Auto, Off)

Connection for using “Audio return channel”

You need to use ARC-compatible cables/devices
and connect to the INPUT 1 terminal to activate this
function.

NOTE

• The ARC (Audio Return Channel) function works only when
using the INPUT 1 terminal.

• When you use an audio system compatible with the ARC
function of the TV, you do not need to connect an optical
audio cable to the TV.

H

Auto wide (DTV input mode only)

The “Auto wide” allows the TV to switch automatically
among the different picture size. (On, Off)

NOTE

• Use “Wide mode” if an image does not switch to the
appropriate picture size. When the broadcast signal
contains no aspect ratio information, the function will not
work even if enabled.

H

4:3 mode (DTV input mode only)

The 4:3 mode allows you to select between “Full”
and “Normal”.

Selected item Description

Full

Wide image without side bars.

Normal

Normal range keeping 4:3 or 16:9
aspect ratio.

4:3 screen types

4:3 mode “Full” 4:3 mode “Normal”

H

Quick start

You can reduce the TV’s start-up time after turning
on the power with the remote control unit.

Selected item Description

On

The TV quickly starts up from standby,
more of power consumption is required
during standby.

Off

Power consumption is less than 1W.

H

Language

Select from among 10 languages: English, Simplifi ed
Chinese, Arabic, French, Portuguese, Russian,
Persian, Thai, Vietnamese and Indonesia.

H

Text language

Select from among 5 kinds of language: West
Europe, East Europe, Cyrillic, Arabic and Farsi.

NOTE

• Teletext can display only when it is sent by a network. Not
used to convert between languages.

H

Digital setup

Selecting the language

Set up to two preferred multi audio languages to
display if the audio languages are available.

1

Press MENU and the MENU screen displays.

2

Press c/d to select “ ” (Setup).

3

Press a/b to select “Digital setup”, and then
press ENTER.

4

Press a/b to select “Digital audio language”, and
then press ENTER.

5

Press a/b to select “1st language” or “2nd
language”.

6

Press c/d to select the desired language.

NOTE

• If audio for the selected languages is not included in
a received broadcast, audio will not be output for that
language.

Setup menu

H

Child lock (ATV and DTV input mode only)

Allows you to use a password to protect certain
settings from being accidentally changed.

Setting a password

1

Repeat steps 1 and 2 in Menu operation.

2

Press a/b to select “Child lock”, and then press

ENTER.

3

If you have already set the password, enter it here.

4

Press a/b to select “Change password”, and
then press ENTER.

5

Enter the 4-digit number as a password using

0 – 9.

6

Enter the same 4-digit number as in step 5 to
confi rm.

NOTE

• To view a locked channel, you must enter a password.
When you select a locked channel, “Child lock has been
activated” is displayed.

• Press ENTER to display the password input window.

Clearing the password

Allows you to clear your password.

1

Repeat steps 1 to 3 in Setting a password.

2

Press a/b to select “Clear password”.

3

Press c/d to select “Yes”, and then press

ENTER.

Parental rating

This function allows TV channels to be restricted.
It prevents children from watching violent or sexual
scenes that may be considered inappropriate.

1

Repeat steps 1 to 3 in Setting a password.

2

Press a/b to select “Parental rating”, and then
press ENTER.

3

Press a/b to select your desired rating, and then
press ENTER.

On-Screen Display Menu

LC-3240LE360X_EN_G268.indd 8LC-3240LE360X_EN_G268.indd 8 8/5/2014 4:41:13 PM8/5/2014 4:41:13 PM

- 9

Switching subtitle languages (DVB Subtitle)

Each time you press [ on the remote control,
the subtitle switches when the broadcast contains
subtitle information.

Set “Hearing impaired” to “On”

(Hearing impaired) 1st language

2nd language

Off

••••••••

Set “Hearing impaired” to “Off”

1st language 2nd language

(Hearing impaired)

Off

••••

NOTE

• This function is valid only if broadcaster is transmitting
multilingual subtitles.

Time zone

This function enables you to select your local time
zone.

1

Press MENU and the MENU screen displays.

2

Press c/d to select “ ” (Setup).

3

Press a/b to select “Digital setup”, and then
press ENTER.

4

Press a/b to select “Time zone”, and then press

ENTER.

5

Press c/d to select the desired time zone.

NOTE

• This function lets you select the right time zone in case the
time displayed in the EPG does not match the local time of
your area.

• Time zone differ depending on the selected country.

H

Identification

You can check the current version of the software on
the screen.

H

Reset

If complex adjustments are made and the settings
cannot be restored to normal, you can reset the
settings to the factory preset values.

NOTE

• If you execute “Reset”, all the settings such as “Picture”,
“Audio” and “Programme setup” will be reset to the factory
preset values.

Audio description (DTV input mode only)

This function allows you to adjust volume output of
audio description if the TV receives a signal including
audio description.

1

Press MENU and the MENU screen displays.

2

Press c/d to select “ ” (Setup).

3

Press a/b to select “Digital setup”, and then
press ENTER.

4

Press a/b to select “Audio description”, and
then press ENTER.

5

Press c/d to select the volume.

Switching the multi audio languages

Each time you press MPX on the remote control, the
audio language switches.

1st audio language

1st audio language

+AD (if available)

2nd audio language

+AD (if available)

2nd audio language

••••

NOTE

• This function is valid only if broadcaster is transmitting audio
description.

Displaying subtitles for the hearing impaired

You can display subtitles for the hearing impaired in
the Teletext broadcast if the subtitle languages are
available.

1

Press MENU and the MENU screen displays.

2

Press c/d to select “ ” (Setup).

3

Press a/b to select “Digital setup”, and then
press ENTER.

4

Press a/b to select “Subtitle”, and then press

ENTER.

5

Press a/b to select “1st language” or “2nd
language”.

6

Press c/d to select the desired language.

NOTE

• If subtitles for the selected language are not included in
a received broadcast, subtitles will not be shown for that
language.

Option menu

H

Output volume select

Allows you to select what controls the audio output.

Selected item Description

Fixed

• Sound via speakers is adjusted with

VOLk/l on the remote control unit

or the TV.

• Sound via the AUDIO OUT terminal is
not adjustable and constantly outputs.

Variable

• Sound via the AUDIO OUT terminal
is adjusted with VOLk/l on the
remote control unit or the TV.

• Sound via speakers is muted.

NOTE

• When “Output volume select” is set to “Variable”, all Audio
menu item cannot be adjusted.

H

Input select

For setting the signal type of external equipment.

Input source Selectable item

INPUT6

COMPONENT, VIDEO

H

Audio select (HDMI input mode only)

You must select HDMI+Analogue if uses the AUDIO
IN (R/L) jack for analogue audio input when using
INPUT 5 (HDMI) terminal.

Option Description

HDMI (Digital)

Select “HDMI (Digital)” if the Devices
(DVD, Blu ray Player, Set Top Box or
etc.) is connected using HDMI cable to
INPUT 5 (HDMI) terminal.

HDMI+
Analogue

Select “HDMI+Analogue” if the Devices
(PC or etc.) is connected using DVI/
HDMI convert cable to INPUT 5 (HDMI)
terminal and AUDIO IN (R/L) jack is used
to input Analogue Audio Signals.

HDMI (Digital)

USB 1

DC5V 1.5A

DC5V 0.9A

MHL

3

4

5

2

POWER

OUTPU

T

DC5V 1.5A

INPUT 4

INPU
T 5

USB 2

DC5V 0.5A

5

8

AUDIO IN

DIGITAL

AUDIO

OUTPUT

ANALOGUE
RGB (PC)

ARC

RS-232C IOI

OI

8

INPUT 8

1

INPUT 1

6

INPUT 6

7

INPUT 7

AUDIO OUT

R - AUDIO

- L

R - A

UDIO

- L

R - AUDIO

- L
VIDEO/Y

P

B

(C

B

)
P

R

(C

R

)

COMPON

ENT/AV INPU

T

VIDEO

5

INPUT 5

DVD player/PC

HDMI+Analogue

US
B
1

DC5V

1.5A

DC5V 0.9A

MHL

3

4

5

2

P
O
WE

R

O
U
T

PU
T

DC5V 1.5A

I
N
PUT 4

I
NP
U

T
5

USB 2

DC
5
V

0.
5
A

5

8

AUDIO

IN

DIGI
T
A
L
AUDIO
O
U
TP
U
T

A

N
ALOGU

E

RGB (PC)

A
R
C

RS-

2
3

2C
I
O
I
OI

8

INP

U
T
8

1

I
N

PU
T
1

6

INPU

T
6

7

I
NPUT 7

A
U
D
IO

OUT

R - AUDIO

­ L

R - AUDIO

- L

R - AUD

IO

­ L
VIDEO/Y

P

B

(C

B

)
P

R

(C

R

)

COM

P
ONE

N
T/AV

IN
PU

T

VID
E

O

5

8

AUDIO IN

5

INPUT 5

PC

H

Auto volume

Different sound sources, fairly often do not have the
same volume level, for example the changing from
movie to the advertisements. Auto volume solves this
problem and equalises the volume levels. (On, Off)

H

Digital audio output

This function allows you to select your favourite audio
output system. (PCM, Auto, Off)

H

Speaker selection

You can choose to listen to the external amplifi er
audio only. (On, Off)

NOTE

• This function only available when “Link operation” is set to
“On”.

• You need to use CEC compatible amplifi er to control
external speaker volume.

H

Audio only

When listening to music from a music programme,
you can set the display off and enjoy audio only.

Selected item Description

On

Audio is output without screen image.

Off

Both screen images and audio are
output.

NOTE

• When you make operations that change the picture on the
TV such as by changing the input source, the “Audio only”
function is set to “Off”.

H

Colour system

You can change the colour system to one that is
compatible with the image on the screen. (Auto,
PAL, SECAM, NTSC 3.58, NTSC 4.43, PAL-60)

NOTE

• If “Auto” is selected, colour system for each channel is
automatically set. If an image does not display clearly,
select another colour system (e.g. PAL, NTSC 4.43).

• “Colour system” is selectable only when inputting a
composite signal.

On-Screen Display Menu

LC-3240LE360X_EN_G268.indd 9LC-3240LE360X_EN_G268.indd 9 8/5/2014 4:41:13 PM8/5/2014 4:41:13 PM

- 10

H

Fine sync. (PC input mode only)

Input signal

• Some input signals may have to be registered
manually to display properly.

• The pairs of input signals (resolutions) in the list
below are not distinguishable when received.
In such case, you have to set the correct signal
manually. After setting once, it will display when the
same signal (resolution) is input again.

1280 g 768 1360 g 768

Adjusting the PC image automatically

Auto sync.

This function enables the screen to be automatically
adjusted to its best possible condition when the
analogue terminals of the TV and PC are connected
with a commercially available RGB cable, etc.

NOTE

• Auto sync. is likely to succeed when an input PC image has
wide vertical stripes (e.g. pattern with high contrast stripes,
or cross-hatched).
It may fail when an input PC image is solid (low contrast).

Adjusting the PC image manually

Ordinarily you can easily adjust the picture as
necessary to change image position using Auto
sync. In some cases, how

ever, manual adjustment is

needed to optimise the image.

Selected item Description

H-Position

Centres the image by moving it to the left
or right.

V-Position

Centres the image by moving it up or
down.

Clock

Adjusts when the image fl ickers with
vertical stripes.

Phase

Adjusts when characters have low
contrast or when the image fl ickers.

NOTE

• For resetting all “Fine sync.” items to the factory preset
values, press a/b to select “Reset”, press ENTER, press

a

/b to select “Yes”, and then press ENTER.

• Images may not be displayed properly depending on the
settings and/or input signals.

H

DivX (R) VOD

Please see USB Media Player on page 15.

H

Demo (store mode only)

When “Store mode” is set to “On”, after all the
settings are completed, the Feature demo screen is
displayed if there is no operation for 30 seconds.

H

System data

USB data transfer

This function allows you to update the TV to the
latest software using a USB device. You must
update the software through the USB terminal.

Software update (OAD)

• This function is for automatically download the
data for the version update software over digital
broadcasts when the “OAD setup” is set to “On”.

• To download, follow the instructions when the
download message appears during a digital
broadcast.

• Once the software upgrade is done, the TV will
automatically go to standby state with Red LED.

OAD scan

• This function is for manually download the data
for the version update software over digital
broadcasts.

CAUTION

• Do not disconnect the AC cord when the software
upgrade is in progress, as this may cause the
upgrade to fail. If problem arises ask a qualifi ed
service personnel before the software upgrade period
expires.

On-Screen Display Menu

EPG RADIO

ATV/DTV

EP

G

RADI

O

ATV/DTV

GUIDE INFO

Programme Guide

You can check the current channel list of DTV/ATV
respectively.

1

Press GUIDE to display the programme channel
list.

2

Press a/b to select your desired programme,
and then press ENTER.

3

Press RETURN or GUIDE to exit.

Info

While watching DTV you can check the extended
programme information on the screen using INFO
on the remote control.

General INFO screen

• Station name

• Title

• Date

• Time for the current programme

• Video system

• Audio system

• Parental rating

NOTE

• If there is more information, pressing a/b allows you to go
to the next page or return to the previous page.

• You can cancel this info by pressing INFO.

ATV/DTV/RADIO buttons

Use the following buttons on the remote control to
operate the menu.

DISPLAY

EPG

HDMI

INFOGUIDE

DISPLAY

EPG

INF

O

GUIDE

ATV/DTV

RADIO

ATV/DTV: Press to switch between ATV and DTV
mode. After switching from ATV or DTV, radio or
external input mode to ATV and DTV mode, the TV
jumps to the most recently viewed ATV and DTV
channel.
RADIO: Press to switch from DTV to radio mode.
The TV will jumps to the most recently tuned radio
channel.

When you watch the TV for the fi rst time

When the TV powers on for the fi rst time after
purchase, perform the auto installation.

Direct Button Operation

LC-3240LE360X_EN_G268.indd 10LC-3240LE360X_EN_G268.indd 10 8/5/2014 4:41:15 PM8/5/2014 4:41:15 PM

- 11

In the TV mode of A2 TV broadcasts

When receiving a stereo signal

Each time you press MPX, the mode switches
between STEREO and MONO.

Stereo mode

B/G

STEREO

BBC1

B/G

MONO

PAL PAL

ATV ATV

BBC1

When receiving a bilingual signal

Each time you press MPX, the mode switches
among CH A, CH B and CH AB.

Bilingual mode

B/G

CH A

BBC1

B/G

CH B

PAL PAL

ATV ATV

BBC1

B/G

CH AB

PAL

ATV

BBC1

When receiving a monaural signal
When you press MPX, “MONO” displays.

Monaural mode

B/G

MONO

PAL

ATV

BBC1

NOTE

• “BBC1”, “01” and “PAL” are tentative network name,
channel and colour system.

EPG

What is an EPG?

An “EPG (Electronic Programme Guide)” is a
programme schedule, which is displayed on the TV
screen. The EPG is broadcasted together with DTV.
The TV screen shows the EPG when the viewer
presses EPG on the remote control, provided that
the TV is receiving the digital broadcasting signal.
The EPG enables you to search for a programme, do
timer view the programme schedule in detail.

Basic Operation

H

Display the EPG screen

1 Press EPG.

INFOGUIDE

ATV/DTV

RADIO

INFO

GU

IDE

ATV/

DTV

R

ADI

O

EPG

33

PROGRAMME GUIDE TIME

HD Monosco

01 Jan 20:01

Manual adjust

10 HD Monosco

Color Bar 576i

11 Color Bar 5...

Monosco 576–1

12 Monosco 576...

Monosco 576–2

13 Monosco 576...

Schedule

INFO

G

Remind

B

ENTER

RETURN

Y

2 Press a to select PROGRAMME GUIDE/TIME.
3 Press c/d to select the desired channel/time

span.

H

Close the EPG screen

4 Press EPG again or RETURN to exit.

NOTE

• For “New Zealand delivery model”, the EPG screen and
operation differ due to the use of MHEG EPG. The EPG
screen and operation vary depending on the broadcasts.

ATV (Analogue TV)

You can run the auto installation to set channels
automatically.

1

To watch the analogue TV, select “ATV” from
“Auto installation” in Programme setup menu.
(See page 5.)

2

After setting the channels, you can select a
channel using CHr/s or 0 – 9 on the remote
control unit. (See page 4.)

DTV (Digital TV)

When the TV accesses to DTV mode for the fi rst
time, you need to run the auto search. To scan all
available services in your area, follow the procedures
below.

1

To watch the DTV broadcasts, select “DTV” from
“Auto installation” in Programmme setup menu.
(See page 5.)

2

After setting the channels, you can select a
channel using CHr/s or 0 – 9 on the remote
control unit. (See page 4.)

Switching the analogue audio
format

You can switch between multiple audio modes
when watching a multiple audio or stereo broadcast
programme.

ATV/DTVATV/DTV

In the NICAM TV broadcasts

When receiving a stereo signal

Each time you press MPX, the mode switches
between NICAM STEREO and MONO.

Stereo mode

B/G

STEREO

BBC1

B/G

MONO

PAL
NICAM

PAL

ATV AT V

BBC1

When receiving a bilingual signal

Each time you press MPX, the mode switches
among NICAM CH A, NICAM CH B, NICAM CH AB
and MONO.

Bilingual mode

B/G

CH A

BBC1

B/G

CH B

PAL
NICAM

PAL
NICAM

ATV ATV

BBC1

B/G

MONO

BBC1

B/G

CH AB

PAL PAL

NICAM

ATV ATV

BBC1

When receiving a monaural signal

Each time you press MPX, the mode switches
between NICAM MONO and MONO.

Monaural mode

B/G

MONO

BBC1

B/G

MONO

PAL
NICAM

PAL

ATV ATV

BBC1

Direct Button Operation

LC-3240LE360X_EN_G268.indd 11LC-3240LE360X_EN_G268.indd 11 8/5/2014 4:41:16 PM8/5/2014 4:41:16 PM

- 12

Colour adjustment and still
image

Allows you to adjust the colour tone of a still image.

1

Press COLOUR ADJ. (FREEZE), the moving
image will be captured and colour adjustment
screen displays.

2

Press a/b/c/d to adjust the colour to your
desired setting.

Button Description

a

White with greenish tone.

b

White with reddish tone.

c

White with bluish tone.

d

White with yellowish tone.

R

Reveal/hide the setting screen.

G

Set adjustment to last user setting.

B

Close the setting screen and unfreeze
image.

ENTER

Save/exit setting.

NOTE

• The colour adjustment screen and still image will
automatically goes out after 30 minutes.

• Freeze/Colour adjustment function does not work in USB
Photo/Movie playback. It works for HDMI, composite/
component and VGA.

ECO mode

This function enables you to reduce the backlight
brightness in order to decrease the power
consumption and increase the backlight life span as
shown in the following table.

Selected item Description

ECO 1

Reduces the backlight brightness.

ECO 2

Reduces the backlight brightness more
than “ECO 1”.

ECO Off

Normal setting of backlight brightness.

ECO status will be displayed on the channel
information window.

Reminder timer setting

You can schedule a reminder for future programmes.
Channel will automatically change on time as
scheduled.

1

Press EPG.

2

Press a/b to select the programme you want to
watch.

3

Press B to set reminder time.

4

Press ENTER to save reminder timer.

• “Timer save success” will display.

NOTE

• “Timer overlay” will display if same time is set twice.

• “Timer past” will display if past time is set.

5

Press ENTER to display the reminder schedule
list.

6

Press RETURN or EPG to exit.

Viewing the reminder schedule list

1

Press EPG.

2

Press Y to display the reminder schedule list.

3

Press a/b to display next or previous screen.

4

Press RETURN or EPG to exit.

Cancelling the reminder timer setting

1

Press EPG.

2

Press Y to display the reminder schedule list.

3

Press a/b to select a programme you want to
cancel.

4

Press R to delete a programme from reminder list.

5

Press RETURN or EPG to exit.

Direct Button Operation

Teletext function

What is Teletext?

Teletext broadcasts pages of information and
entertainment to specially equipped television sets.
News, weather reports, sports information, stock
exchange prices and programme previews are
among the many services available.

Turning on and off Teletext

1

Select a TV channel or external input source
providing the Teletext programme.

2

Press m to display the Teletext.

3

Each time you press m, the screen switches as
shown below.

TELETEXT

TELETEXT

NOTE

• If you select a programme with no Teletext signal,
“No Teletext available.” is displayed.

• The same message displays during other modes if no
Teletext signal is available.

• New Zealand delivery model can receive MHEG data
broadcasting.

Button functions

Buttons Description

CH (r/s)

Increase or decrease the page number.

Colour (Red/
Green/Yellow/
Blue)

You can select a group or block
of pages displayed in the coloured
brackets at the bottom of the screen
by pressing the corresponding Colour
(Red/Green/Yellow/Blue) on the
remote control unit.

0 – 9

Directly select any page from 100 to 899
by using 0 – 9.

k

(Reveal
hidden for
TELETEXT)

To reveal hidden information such as an
answer to a quiz.

3

(Hold)

To stop updating Teletext pages
automatically or release the hold mode.

[

(Subtitle for
TELETEXT)

Display the subtitle during Teletext page.

• Subtitle will not be displayed when the
service does not contain subtitle information.

NOTE

• Teletext can display only when it is sent by a network. Not
used to convert between languages.

Using a Smartphone with
the TV

This function enables you to connect the TV to a
smartphone that supports Mobile High-Defi nition
Link (MHL) using an MHL-compatible cable.
To connect the TV to your MHL-compatible
smartphone, be sure to use an MHL-compatible
cable (commercially available).

• You can view pictures and video on a large screen.

• You can play back music fi les.

DC5V 0.9A

MHL

2

MHL-compatible cable

INPUT 2 terminal (Rear side)

NOTE

• An MHL-compatible portable device is required to use this
function. Connect the device to the INPUT 2 terminal.

• This production incorporates MHL 2.

H

Auto power on

When an MHL-compatible device is connected to
the TV, the TV turns on automatically.

• This function operates when “Link operation” is set to “On”.
(See page 8.)

H

Auto input selection

When an MHL-compatible device is connected
while the TV is on, the input mode is selected
automatically.

• This function operates when “Link operation” is set to “On”.
(See page 8.)

H

Operation using the remote control

The remote control of the TV can be used to operate
a portable device.

• a/b/c/d, ENTER, 0 – 9, etc.

• The operations vary depending on the connected
equipment and content being viewed.

• Colour (Red/Green/Yellow/Blue) may be available to
control play/pause/fast forward/back forward function.

• The illustrations used throughout this manual are based
on LC-40LE360X.

LC-3240LE360X_EN_G268.indd 12LC-3240LE360X_EN_G268.indd 12 8/5/2014 4:41:16 PM8/5/2014 4:41:16 PM

- 13

PC compatibility chart

Resolution

Horizontal
Frequency

Vertical

Frequency

VESA

Standard

Analogue

(D-Sub)

Digital (HDMI)

VGA

640 g 480

31.5 kHz 60 Hz

✔✔✔

SVGA

800 g 600

37.9 kHz 60 Hz

✔✔✔

XGA

1024 g 768

48.4 kHz 60 Hz

✔✔✔

WXGA

1360 g 768

47.7 kHz 60 Hz

✔✔✔

✴

1080P

✴

1920 g 1080

67.5 kHz 60 Hz

✔✔

✴

: only for LC-40LE360X

DDC is a registered trademark of Video Electronics Standards Association.
Power Management is a registered trademark of Sun Microsystems, Inc.
VGA, SVGA, XGA and WXGA are registered trademarks of International Business Machines Corporation.

PC Control of the TV

• When a programme is set, the TV can be controlled from
the PC using the RS-232C terminal.

The input signal (PC/video) can be selected, the volume

can be adjusted and various other adjustments and settings
can be made, enabling automatic programmed playing.

• Attach an RS-232C cable cross-type (commercially
available) to the Din/D-sub RS-232C for the connections.

NOTE

• This operation system should be used by a person who is
accustomed to using PCs.

Communication conditions

Set the RS-232C communications settings on the
PC to match the communications conditions of the
TV. The communications settings of the TV are as
follows:

Baud rate: 9,600 bps

Data length: 8 bits

Parity bit: None

Stop bit: 1 bit

Flow control: None

Communication procedure

Send the control commands from the PC via the
RS-232C connector.
The TV operates according to the received command
and sends a response message to the PC.
Do not send multiple commands at the same time.
Wait until the PC receives the OK response before
sending the next command.

Command format

Eight ASCII codes e CR

C1 C2 C3 C4 P1 P2 P3 P4

Command 4-digits Parameter 4-digits Return code

Command 4-digits: Command. The text of four characters.

Parameter 4-digits: Parameter 0 – 9, space, ?

Parameter

Input the parameter values, aligning left, and fi ll with
space(s) for the remainder. (Be sure that four values
are input for the parameter.)
When the input parameter is not correct, “ERR”
returns. (Refer to “Response code format”.)

a 30

0009

0

Response code format

Normal response

OK

Return code (0DH)

Problem response (communication error or incorrect
command)

ERR

Return code (0DH)

RS-232C commands list

Commands

• Commands not indicated here are not guaranteed to operate.

CONTROL ITEM COMMAND PARAMETER CONTROL CONTENTS

POWER SETTING P O W R 0

___

POWER OFF (STANDBY)

INPUT SELECTION

ITGD

____

INPUT SWITCHING (TOGGLE)

ITVD

____

ATV (CHANNEL FIXED)

IDTV

____

DTV (CHANNEL FIXED)

IAVD

*

___

INPUT 1 – 9 (1 – 9)

CHANNEL

DCCH

**

__

ATV DIRECT CHANNEL (1 – 99)

CHUP

____

ATV CHANNEL UP

CHDW

____

ATV CHANNEL DOWN

DTVD

***

_

DTV DIRECT CHANNEL (1 – 999)

DTUP

____

DTV CHANNEL UP

DTDW

____

DTV CHANNEL DOWN

AV MODE SELECTION

AVMD0

___

TOGGLE

AVMD1

___

STANDARD

AVMD2

___

MOVIE

AVMD5

___

DYNAMIC

AVMD6

___

DYNAMIC (FIXED)

AVMD7

___

PC

VOLUME V O L M

***

_

VOLUME (0 – 100)

POSITION

HPOS

***

_

H-POSITION (PC) (000 – 180)

VPOS

***

_

V-POSITION (PC) (000 – 120)

CLCK

***

_

CLOCK (000 – 180)

PHSE

***

_

PHASE (000 – 015)

WIDE MODE

WIDE0

___

TOGGLE (AV)

WIDE1

___

NORMAL (AV)/4:3 (USB – MOVIE)

WIDE2

___

ZOOM 14:9 (AV)

WIDE3

___

PANORAMA (AV)

WIDE4

___

FULL (AV)/16:9 (USB – MOVIE)

WIDE5

___

CINEMA 16:9 (AV)

WIDE6

___

CINEMA 14:9 (AV)

WIDE7

___

NORMAL (PC)

WIDE9

___

FULL (PC)
WIDE10__DOT BY DOT (PC)
WIDE11__UNDERSCAN
WIDE12__AUTO (USB – MOVIE)
WIDE13__JUST SCAN (USB – MOVIE)

MUTE

MUTE0

___

TOGGLE
MUTE1

___

MUTE ON
MUTE2

___

MUTE OFF

SRS TS HD

ACSU0

___

SRS TS HD TOGGLE
ACSU1

___

SRS TS HD ON
ACSU2

___

SRS TS HD OFF

AUDIO CHANGE

ACHA

____

TOGGLE

SLEEP TIMER

OF TM0

___

OFF
OF TM1

___

SLEEP TIMER 30 MIN
OF TM2

___

SLEEP TIMER 1 HOUR
OF TM3

___

SLEEP TIMER 1 HOUR 30 MIN
OF TM4

___

SLEEP TIMER 2 HOUR
OF TM5

___

SLEEP TIMER 2 HOUR 30 MIN

TEXT

TEXT0

___

TEXT OFF
TEXT1

___

TEXT CHANGE TOGGLE

NOTE

• If an underbar (_) appears in the parameter column, enter a space.

• If an asterisk (*) appears, enter a value in the range indicated in brackets under CONTROL CONTENTS.

Using a PC

LC-3240LE360X_EN_G268.indd 13LC-3240LE360X_EN_G268.indd 13 8/5/2014 4:41:16 PM8/5/2014 4:41:16 PM

- 14

H

Selecting modes

Photo mode Music mode Movie mode

USB

1

Press INPUT to select the “USB” mode.

2

Press c/d to select “Photo mode”, “Music
mode” or “Movie mode”, and then press ENTER.

3

Press c/d to select your USB directory, and
then press ENTER.

4

Press a/b/c/d to select the desired folder, and
then press ENTER.

NOTE

• “Wide mode” is fi xed during “Photo mode” and “Music
mode”.

• Depending on the USB device, the TV may not be able to
recognise the contained data.

• A fi le name with more than 10 characters may not be
displayed all (depending on the character set).

• Files in USB 1.1 devices may not be played properly.

• Operation using USB hubs is not guaranteed.

• The compatibility of USB HDDs may not be guaranteed.

PHOTO slideshow

C:\Photo 1/2

Back

Fireworks.jpg

Switzerland.jpg

Japan-hokkaid.. Island.jpgSki Action.jpg

WxH:

1300 X 822

Size:

789 KBytes

Date:

2011 / 08 / 04

Time:

10 : 12 :12

Ski Action.jpg

When you press PHOTO, the TV screen will
automatically play the photo slideshow.

• If there is no USB drive, the TV will switch to Selecting
modes screen.

• Photo slideshows will autoplay only for the photos located
on the top layer of USB drive. To enable autoplay for
photos located in a subfolder, you need to manually select
the subfolder, and then press PHOTO.

You can select the duration for each photo to display,
and also the duration for the slideshow to play.

Duration for photos to display

1 minute10 seconds5 seconds3 seconds

Duration for slideshow to play

Continuous3 hour1 hour

• The TV will automatically power off after the
selected playtime ends.

NOTE

• Background music will autoplay during a slideshow only if
the music fi le is located in the same folder with the photo
fi les.

• If you want to stop the photo slideshows, press RETURN
to exit.

Control panel for photo/music/movie mode operations

• Press B to display the control panel below.

Button/
menu

Description Photo Music Movie

ENTER

When selecting a folder icon: Enter this directory.
When selecting a thumbnail: Play the selected fi le.

✔✔✔

Play/Pause.

✔✔✔

Rewind. Each time you press rewind, the speed will change
(2x, 4x, 8x, 16x).

–

✔✔

Fast-forward. Each time you press fast-forward, the speed will
change (2x, 4x, 8x, 16x).

–

✔✔

Play the previous fi le.

✔✔✔

Play the next fi le.

✔✔✔

RETURN

/

Stop playback and return to the list of fi les.

✔✔✔

Loop. Each time you press ENTER, the mode will switch between

Repeat NoneRepeat AllRepeat 1

✔✔✔

Play/cancel the background music.

✔

––

Mute. Press ENTER to toggle between mute and unmute.

–

✔

–

Two loop. Press ENTER to set the current playback time starting
point. Press ENTER to set the loop end of the current playing time
and start loop playback. Press ENTER button to cancel the loop.

––

✔

Show playlists. Select a fi le from the playlists to start playback.

✔✔✔

Display information about the fi le.

✔✔✔

Slow-forward.
Each time you press slow-forward, the speed will change.

––

✔

Single frame-forward.
Each time you press ENTER, the picture will change to the next still
picture.

––

✔

Set time for music/movie playback.

–

✔✔

Rotate clockwise 90º.

✔

––

Rotate counterclockwise 90º.

✔

––

Zoom in an image. Select to display larger image size.

✔

–

✔

Zoom out an image. Select to display smaller image size.

✔

–

✔

Pan image up, down, left or right after you zoom in. Press ENTER
to exit.

✔

–

✔

Select playback length of a slideshow.

✔

––

Select photo display interval.

✔

––

Wide mode.
You can manually select the size of a picture appeared on your
screen.

––

✔

NOTE

• Files in folder which are not related to a selected mode cannot be accessed.

• “Unsupported fi le” alert will pops up for a selected fi le of invalid format.

USB Media Player

LC-3240LE360X_EN_G268.indd 14LC-3240LE360X_EN_G268.indd 14 8/5/2014 4:41:17 PM8/5/2014 4:41:17 PM

- 15

DivX® setup

This is the function to confi rm your registration code.

1

Press MENU and the MENU screen displays.

2

Press c/d to select “ ” (Option).

3

Press a/b to select “DivX ( R ) VOD”, and then press ENTER.

• Copy the 10 digit code down.

DivX ( R ) VOD Register

You need to visit the DivX main page to register your TV. Please follow the online instruction to create DivX
account and DivX registration video download.
Your registration is complete when you play the DivX registration video on TV.

DivX ( R ) VOD Deregister

You can fi nd the deregistration code (8~10 digits). Please use this code to deactivate on DivX website.

NOTE

• Visit http://vod.divx.com for more information about DivX® VOD.

List of fi les compatible with USB mode

USB device/File system

USB Memory/FAT/FAT32/NTFS

Photo file format

JPEG (.jpg)/PNG/BMP

Music file format (Files may not be
playable depending on the bitrate)

MP3 (.mp3) Bitrate: 32 k, 40 k, 48 k, 56 k, 64 k, 80 k, 96 k, 112 k, 128 k, 160 k,
192 k, 224 k, 256 k, 320 kbps
Sampling frequency: 32 k, 44.1 k, 48 kHz

Video fi le format

File extension Container Video

*.avi AVI

DivX 3.11/4.12/5.x/6

H.264

MPEG4

Motion Jpeg

*.mkv MKV

DivX 3.11/4.12/5.x/6

H.264

MPEG4

*.mp4
*.mov

MP4

DivX 3.11/4.12/5.x/6

H.264

MPEG4

*.vob MPEG2 – PS MPEG2

*.mpg/*.mpeg

MPG

MPEG

MPEG2
MPEG1

*.ts/*.trp/*.tp TS

H.264

MPEG2

*.asf ASF

DivX 3.11/4.12/5.x/6

VC-1

*.divx DivX DivX 3.11/4/4.12/5.x/6

Appendix

Troubleshooting

The problems described below are not always caused by malfunctions. Check the TV again before having the
TV serviced.

Problem Possible Solution

• No power. • Check if you pressed POWER on the remote control unit. (See page 5.)
If the indicator on the TV lights up red, press POWER.

• Is the AC cord disconnected?

• Has the power been turned on? (See page 5.)

• Unit cannot be operated. • External infl uences such as lightning, static electricity, etc., may cause improper operation.

In this case, operate the unit after fi rst turning the power off the TV or unplugging the AC
cord and re-plugging it in after 1 or 2 minutes.

• Remote control unit does

not operate.

• Is battery inserted with polarity (e, f) aligned? (See page 4.)

• Is battery worn out? (Replace with new battery.)

• Are you using it under strong or fl uorescent lighting?

• Is a fl uorescent light shining on the remote control sensor?

• Picture is cut off. • Is the image position correct? (See page 10)

• Are screen mode adjustments such as picture size made correctly?

(See pages 7 and 10.)

• Strange colour, light

colour, or dark, or colour
misalignment.

• Adjust the picture tone. (See page 7.)

• Is the room too bright? The picture may look dark in a room that is too bright.

• Check the colour system setting. (See pages 6, 9.)

• Check the input signal setting. (See page 10.)

• Check the HDMI auto view setting. (See page 8.)

• Power is suddenly turned

off.

• The unit’s internal temperature has increased.
Remove any objects blocking the vent or clean.

• Check the ECO setting. (See page 7.)

• Is the sleep timer set? (See page 4.)

• No picture. • Is the connection to external equipment correct? (See page 3.)

• Has the input signal setup been performed correctly after connection? (See page 10.)

• Is the correct input selected?

• Is the “Picture adjust” correct? (See page 7.)

• Is the antenna connected properly? (See page 3.)

• Is “On” selected in “Audio only”? (See page 9.)

• No sound. • Is the volume too low? (See page 4.)

• Make sure that headphones are not connected.

• The TV sometimes makes a

cracking sound.

• This is not a malfunction. This happens when the cabinet slightly expands and contracts

according to changes in temperature. This does not affect the TV’s performance.

Cautions regarding use in high and low temperature environments

• When the unit is used in a low temperature space (e.g. room, offi ce), the picture may leave trails or appear slightly delayed.
This is not a malfunction, and the unit will recover when the temperature returns to normal.

• Do not leave the unit in a hot or cold location. Also, do not leave the unit in a location exposed to direct sunlight or near a
heater, as this may cause the cabinet to deform and the LCD panel to malfunction.

Storage temperature: f20°C to e60°C.

USB Media Player

LC-3240LE360X_EN_G268.indd 15LC-3240LE360X_EN_G268.indd 15 8/5/2014 4:41:17 PM8/5/2014 4:41:17 PM

- 16

Specifi cations

Item Model LC-32LE360X LC-40LE360X

LCD panel 80 cm 100 cm

Resolution

1,049,088 pixels (1366 g 768) 2,073,600 pixels (1920 g 1080)

Video colour system PAL/SECAM/NTSC 3.58/NTSC 4.43/PAL 60

TV function TV-standard Analogue PAL: B/G, D/K, I SECAM: B/G, D/K, K/K

1

NTSC: M

Digital DVB-T

Receiving
channel

VHF/UHF 44.25—863.25 MHz

CATV S1—S41 ch (including Hyperband)

TV-tuning system Auto Preset 99 ch

STEREO/BILINGUAL NICAM: B/G, I, D/K A2 stereo: B/G MTS: M

Viewing angles H : 176º V : 176º

Audio amplifi er/Speakers

10 W g 2 / 5 g 9 cm 2pcs

Terminals

Antenna input

UHF/VHF 75 q DIN type

INPUT 1 (HDMI/ARC) HDMI (HDMI input)

INPUT 2 (HDMI/MHL) HDMI (HDMI input)

INPUT 3/INPUT 4/INPUT 5
(HDMI)

HDMI (HDMI input)

INPUT 6 VIDEO in, AUDIO in, COMPONENT in

INPUT 7

VIDEO in, AUDIO in

INPUT 8 (PC) 15 pin mini D-sub

AUDIO OUT AUDIO out

AUDIO IN (HDMI 5/INPUT
8 (PC))

3.5 mm jack*

1

USB 1/ USB 2 USB

OUTPUT USB

RS-232C 9 pin D-sub male connector

DIGITAL AUDIO OUTPUT Optical Digital Audio Output

Headphone

3.5 mm stereo

OSD language English/Simplifi ed Chinese/Arabic/French/Portuguese/Russian/Persian/

Thai/Vietnamese/Indonesia

Power requirement AC 110 — 240 V, 50/60 Hz

Power consumption 63 W (0.5 W Standby) 89 W (0.6 W Standby)

Dimensions without stand

739 (W) g 440 (H) g 93 (D) mm 910 (W) g 525 (H) g 92 (D) mm

with stand

739 (W) g 485 (H) g 210 (D) mm 910 (W) g 571 (H) g 225 (D) mm

Weight without stand (with stand) 6.0 kg (6.9 kg) 8.4 kg (10.0 kg)

Operating temperature 0°C — 40°C

*

1

The HDMI 5 and INPUT 8 terminals can both use the same audio input terminal.

• As a part of policy of continuous improvement, SHARP reserves the right to make design and specifi cation changes for
product improvement without prior notice. The performance specifi cation fi gures indicated are nominal values of production
units. There may be some deviations from these values in individual units.

• Specifi cation may differ depending on the selected country.

CAUTION

• Installing the Liquid Crystal Television requires special skill that should only be performed by qualifi ed service personnel.
Customers should not attempt to do the work themselves. SHARP bears no responsibility for improper mounting or mounting
that results in accident or injury.

• Carefully read the instructions that come with the bracket before beginning work.

Protection against overturning

There is a danger of the product overturning in the case of a disaster or sudden collision. Carry out the
following tip-resistant measurement for your safety.

Anchoring the TV to the wall or a pillar

1

Fix the product with the 2 clamps (supplied), using
the screws (supplied).

Cup hook
(commercially available)

Clamps (supplied)

View from the top

Tie (commercially
available)

Wall

Screws for attaching clamps (supplied)

2

Fix the TV to the wall using extra strong ties
(commercially available).

Fixing the TV to the table

1

Transfer the product to the table where you intend to fi x the TV.

2

Fix the TV to the table by the prevent angle with the screws (commercially available).

• Use the screws (commercially available) whose shape is compatible with the prevent angle.

USB 1

DC5V 1.5A

DC5V 0.9A

MHL

3

4

5

2

POWE
R

OUTP

UT

DC5V 1

.5A

INPUT 4

INPUT 5

USB 2

D

C
5V 0

.5A

5

8

AUDIO IN

D

I
GITAL

AU

DIO

OU

TPUT

ANALOGUE

RGB (PC)

ARC

RS-232C

IO
I
OI

8

INPUT 8

1

I
NPUT 1

6

INP

UT
6

7

INPUT

7

AUDIO

OUT

R - AUDIO - L

R

- AUDIO - L

R - AUD

I
O - L

VIDEO/Y

P

B

(C

B

)
P

R

(C

R

)

COMPONENT/AV INPUT

V

IDEO

Screws
(commercially
available)

Table

Prevent angle
(supplied)

CAUTION

• As this product is heavy, use a table that is wide enough to support the product and capable of withstanding the
product’s weight. The table should be set where it will not be overturned.

• The illustrations used throughout this manual are based on LC-40LE360X.

LC-3240LE360X_EN_G268.indd 16LC-3240LE360X_EN_G268.indd 16 8/5/2014 4:41:17 PM8/5/2014 4:41:17 PM

- 17

Dimensional drawings

92

910

879.8

487

571

313

599

86

525

225

200

200

USB 1

DC5V 1.5A

DC5V 0.9A

MHL

2

3

4

5

OUTPUT
DC5V 1.5A

INPUT 4

INPUT 5

USB 2

DC5V 0.5A

POWER

5

8

AUDIO IN

ANALOGUE
RGB (PC)

ARC

RS-232C IO

IOI

8

INPUT 8

1

INPUT 1

DIGITAL

AUDIO

OUTPUT

6

INPUT 6

7

INPUT 7

AUDIO O

UT

R - AUDIO -

L

R - AUDIO - L

R - AUDIO - L

VIDEO/Y

P

B

(C

B

)
P

R

(C

R

)

COMPONENT/AV INPUT

VIDEO

Unit : mm

100

100

477

440

739

700.4

394.8

265.6

93
86

210

485

LC-32LE360X

LC-40LE360X

LC-3240LE360X_EN_G268.indd 17LC-3240LE360X_EN_G268.indd 17 8/5/2014 4:41:18 PM8/5/2014 4:41:18 PM

- 18

CLEARING THE PASSWORD

If you forget the password, clear the password using the following procedure.

1

Press MENU to display the MENU screen, and
then press c/d to select “

” (Setup).

2

Press a/b to select “Child lock”, and then press

ENTER and the password input screen display.

3

If you enter “3001” using 0 – 9, the “Child lock”
setting menu will be displayed.

4

Enter the 4-digit number as a password using
0 – 9. The new password is now set.

DISPLAY

ATV/DTV

DISPLA

Y

ATV/

DTV

The Password is

.

NOTE

• As a precautionary measure, make a note of your password above, remove it from this manual, and keep it in a familiar place.

Note

LC-3240LE360X_EN_G268.indd 18LC-3240LE360X_EN_G268.indd 18 8/5/2014 4:41:21 PM8/5/2014 4:41:21 PM

- 19

Note

LC-3240LE360X_EN_G268.indd 19LC-3240LE360X_EN_G268.indd 19 8/5/2014 4:41:21 PM8/5/2014 4:41:21 PM

- 20

Note

LC-3240LE360X_EN_G268.indd 20LC-3240LE360X_EN_G268.indd 20 8/5/2014 4:41:21 PM8/5/2014 4:41:21 PM

- 21

Note

LC-3240LE360X_EN_G268.indd 21LC-3240LE360X_EN_G268.indd 21 8/5/2014 4:41:21 PM8/5/2014 4:41:21 PM

FOR LOCATION ENQUIRIES WITHIN

NEW ZEALAND

REGARDING YOUR LOCAL

SHARP CORPORATION OF NEW ZEALAND LIMITED

VISIT OUR WEBSITE AT

SHARP CUSTOMER SERVICES

TELEPHONE: [phone]

FACSIMILE: 09 573 0113

FOR LOCATION ENQUIRIES WITHIN

AUSTRALIA

REGARDING YOUR LOCAL

SHARP APPROVED SERVICE CENTRE

VISIT OUR WEBSITE AT

www.sharp.net.au

OR CALL SHARP CUSTOMER CARE

1300 135 022

SHARP CORPORATION OF AUSTRALIA PTY LTD

SPform019(AUGUST 2011)

(LOCAL CALL COSTS APPLY WITHIN AUSTRALIA)

SHARP APPROVED SERVICE CENTRE

www.sharp.net.nz

CONTACT YOUR SELLING DEALER/RETAILER

OR CALL

Printed in Malaysia
TINS-G268WJZZ
14P09-MA-NP

loss or damage. You are also entitled to have the goods repaired or replaced

LC-3240LE360X_EN_G268.indd 22LC-3240LE360X_EN_G268.indd 22 8/5/2014 4:41:21 PM8/5/2014 4:41:21 PM