Sharp LC-40FI3221K, LC-40FI3221KW, LC-40FI3421K, LC-40FI3521K, LC-40FI3321K Quick Start Setup Manual

Download

Page 1

LC-40FI3221K

LC-40FI3221KW

LC-40FI3321K LC-40FI3421K LC-40FI3521K

Quick Start Set Up Guide

For information on using the TV’s features, please refer to the operating Instructions.

Quick & easy guide for setting up your TV

What is included in the box Using the remote control Setting up the TV for the  rst time - including attaching the stand Connecting other devices to the Television

Need help setting up or using your TV?

Please contact the UK & ROI Helpline* Telephone UK 0330 024 0803 or ROI 01443 3323 Online support at: www.umc-uk.co.uk Email support at: service@umc-uk.co.uk

*Calls to 0330 numbers are charged at standard call rates and are included as part of any bundled minutes with your phone provider. Calls to the ROI number are charged at the local call rate. The telephone opening hours are Monday to Friday 8.30am to 6pm, Saturday 9am – 5pm. Bank Holidays - 10am to 4pm

Closed Christmas and New Years day

Model Numbers

LC-40FI3221K

LC-40FI3221KW

LC-40FI3321K

LC-40FI3421K

LC-40FI3521K

SHA/QSW/0001

Trademark

Sharp

Model ID LC-40FI3221K

LC-40FI3221KW

LC-40FI3321K LC-40FI3421K LC-40FI3521K

Energy e ciency class A+

Visible screen size (diagonal) 102 cm / 40 inches

On-mode power consumption 45.0 W

Annual energy consumption *1 66 kWh

Standby power consumption *2 <0.50 W

O mode power consumption

n/a

Screen resolution 1920 (H) x 1080 (V)

*1: Energy consumption XYZ kWh per year, based on the power consumption of the television operating 4 hours per day for 365 days. The actual energy consumption will depend on how the television is used. *2: When the TV is turned o with the remote control/standby button and no function is active.

Product  che

Additional Technical Information

RF 75 ohm Antenna / Analog / DVB

Inputs 3 x HDMI, 2 x USB, 1 x SCART,

1 x RJ45 LAN/Ethernet, 1 x Component/YPbPr,

1 x Composite/Video, 1 x L/R Audio shared for Composite/

Video & Component/YPbPr

Sound Outputs 1 x Digital Optical Audio output, 1 x 3.5mm Headphone

Speaker** / Ampli er Watts (RMS) 2 x 10 / 2 x 8

Voltage and power consumption AC 220V ~ 240V; 50Hz

45/65/80W (home mode/standard/max)

(<0.5W in Standby)

Dimensions including stand (mm)

921W x 576H x 199D

Net weight (Kgs) 8.0

Wall Mounting VESA 200 x 300 (mm)

**Built-in Harman Kardon speaker systems (Full-range speaker and tweeter).

Harman Kardon is trademark of HARMAN International Industries, Incorporated, registered in the United States and/or other countries.

Win a

Soundbar

www.registertoday.co.uk/sharp and enter into a prize draw to

Terms and conditions apply. Online registration only.ly

Technical Speci cation

Please save your box/packaging as you will need this in the event of warranty/service repair or support.

We are unable to carry out warranty/service if you are unable to package it correctly. The safest way to

package your item in the event of warranty/service repair is in it’s original box/packaging.

WHAT IS INCLUDED IN THE BOX

1 x Operating Instructions

1 x Quick start guide

1 x TV

Accessories

Included with this TV are the following accessories.

1 x R (right)

1 x Stand installation pack

4 x

1 x L (left)

1 x Remote Control and 2 x AAA Batteries

1 x Power Cable

REMOTE CONTROL

STANDBY - Switch on TV when in standby or vice versa

MUTE - Mute the sound or vice versa

DTV - Switch to Freeview source

RADIO - Switch to radio whilst in Freeview source

USB - Switch to USB source

DVD - Switch to DVD source

NUMBER BUTTONS - 0 – 9 to select a TV channel directly.

TV GUIDE - Opens the 7 Day TV Guide (Freeview mode)

- To return to the previous channel viewed

VOL (+/-) - To increase / decrease the sound level

P.MODE - Scrolls through picture mode options

S.MODE - Scrolls through sound mode options

FAV - To display favourites menu

CH (+/-) - To increase or decrease the channel being watched

MENU - To display OSD menu

EXIT - To exit all menus

- Allows you to navigate the on-screen menus

and adjust the system settings to your preference

SOURCE - To display the input/source menu

INFO - Press once for now/next channel information

Press twice for programme information about current

programme

ASPECT - To switch the screen between the different picture

formats

SLEEP - Press repeatedly to cycle through the sleep options

AUDIO - To change the audio language (if available)

SUBTITLE - To switch the dialogue at the bottom of the screen

(on/off)

TEXT - To enter/exit Text

TEXT HOLD - Teletext mode - Hold current page which is

displayed (Analogue TV)

DISPLAY - To switch off the screen when listening to radio

TEXT/DVD ZOOM - Zoom function for Teletext and DVD

DVD MENU/RECORD - Access the DVD root menu and USB

record function

- To restart the current chapter

- To advance forward to the next chapter

- To stop the playback/Eject Disc

(To EJECT the disc press/hold the

button for 4 seconds)

- To play in fast rewind mode

- To play in fast forward mode

- To play/pause

DVD SETUP/REC LIST - Opens up DVD Menu or Opens the list

of what has been previously recorded

GOTO - To go to a speciﬁc chapter

A-B - Press once to set point, press a second time to return

to point

ANGLE - Select different angle of DVD

REPEAT - To repeat playback

Key

For models with integrated DVD players.

For models with PVR Function.

For models with USB Playback.

( / / / / OK)

Sky remote code

If you wish to use your Sky remote to

operate the TV’s basic functions, you will

need a Sky remote control (Revision 9 or

later) and you will need to program it with

the code 2134. If you wish to use your

Sky Q remote to operate the TV’s basic

functions, you will need to program it with

the code 4170.

Page 2

Screen 1

When you ﬁrst turn on the set, you will be welcomed by the First Time Installation screen as shown above.

Language: Select your preferred on-screen display language. This will change the language in which the menus and associated information is displayed in. When the setup has been completed, this can be changed by selecting Menu > Settings > Language.

Fitting the stand

Connecting your set

First time installation

Screen 2

Tuning Mode: Select what you wish to tune via TV’s built-in tuner. You can choose from Freeview TV, Analogue TV and ALL (Freeview + Analogue). At the next step, the set will tune in selected option.

Country: Select the correct country in which the set will be used in. This will enable the TV to correctly install the functions applicable in the country of use.

Environment: Use this option to select either Home or Store mode. HOME MODE is a power saving mode which reduces the energy used by up to 25% (by reducing the power to the LED/LCD panel). When in STORE MODE the picture will be brighter. An on-screen banner showing the sets functionality will appear on the screen after 2 minutes.

Note: In Home Mode, the TV will switch itself to the standby mode after 4 hours in the event that the buttons on the remote control or TV are not used.

EARPHONE Earphone socket

LAN* Network connection

Digital audio Digital optical audio output

SCART SCART input

HDMI 1 (ARC) HDMI input

HDMI 2 HDMI input

RF IN RF/TV Aerial Input

For the stand installation, there is one type of screw provided as shown below. To complete the stand installation you will require a cross head screw driver. Place the TV set on a ﬂ at and clean surface with the panel facing downwards to avoid damage.

Setting up the TV set for the  rst time

Connectivity

1) Connect the TV to your power socket.

2) If you wish to use the TV to receive Freeview/Saorview channels, connect the RF input from the TV to your outdoor Digital TV aerial. If you do not wish to receive Freeview/Saorview, skip this step.

To receive Freeview channels, in particular Freeview HD channels, you will need a Digital TV aerial and be in a good Freeview coverage area. You can check coverage for your postcode at www.freeview.co.uk.

Please note that any Freeview HD channels found during tuning will be placed in channel positions above 100. For example, 101 (BBC1 HD) 102 (BBC2 HD) etc.

Back/Shortest

Front/Longest

4 x

3 4

Outdoor Digital TV Aerial

Used for attaching the stand to the TV set ( g.2)

4 x

TV panel must be facing downwards.

* The Ethernet/LAN port is used for Freeview HD services.

Place the TV set on a ﬂ at and clean surface with the panel facing downwards to avoid damage.

When the stand feet are installed correctly the stand feet will be longest at the front of the TV and shortest at the back with the feet pointing away from each other.

When the stand/feet are in the correct position, secure the feet to the underside of the TV set using 4 screws provided.

EARPHONE

SCART

HDMI 3 HDMI input

USB x 2 USB port

CI card in Common interface module

Video Composite Video/CVBS input

YPbPr HD input (Ypbpr)

L/R Audio shared for Composite Video/CVBS and component/YPbPr

L/R

VIDEO L (Audio In) R (Audio In) Y Pb Pr

3 Powering On the TV

Switch on the television by pressing the TV control stick located on the TV set.

TV control stick

Insert the batteries supplied into the remote control and press the standby button to power on the TV.

TV Control Stick Remote Control: Installing Batteries

guarantee online within

14 days of purchase at

www.registertoday.co.uk/sharp

and enter into a prize draw to

win a Sharp Soundbar

guarantee online within

4 days of purchase at

ww.registertoday.co.uk/shar

and enter into a prize draw t

win a Sharp Soundba

Terms and conditions apply. Online registration only.

LC-40FI3x21K SHA-QSW-0001.indd 2LC-40FI3x21K SHA-QSW-0001.indd 2 24/05/2018 11:07:5724/05/2018 11:07:57