Sharp LC-32CHG6242K, LC-55CFG6242K, LC-55CFG6241K, LC-49CFG6242K, LC-43CFG6241K User Manual

...
LED SMART TV with Freeview HD, Saorview & USB PVR
User Guide
Model No
LC-32CHG6241K LC-32CFG6241K LC-40CFG6241K LC-43CFG6241K LC-49CFG6241K
LC-55CFG6241K
LC-32CHG6242K LC-32CFG6242K LC-40CFG6242K LC-43CFG6242K LC-49CFG6242K
LC-55CFG6242K
Important safety instruction
Please read these instructions. All the safety and operating instructions should be read before the appliance is operated.
Warnings
Television sets with 40” screens or more must be
lifted and carried by at least 2 people.
This television does not contain any parts that are
serviceable by the user. In case of a fault, contact the manufacturer or authorised service department. Exposing the internal parts inside the TV may endanger your life. The manufacturers guarantee does not extend to faults caused by repairs carried out by unauthorised third parties.
To prevent spread of fi re, keep candles or other open fl ames away from this product at all times
To reduce the risk of fi re, electric shock or damage
to the TV, do not expose it to dust, rain or moisture. Never expose the TV to dripping or splashing and do not place objects fi lled with liquids on or near the TV.
Do not connect any external devices (DVD player,
games console etc) when the TV is switched on. Disconnect both the TV and device from the mains before connecting. Only switch appliances on when the connection process is complete.
Do not place the television in a confi ned space and
do not obstruct the ventilation openings at the rear of the television.
When installing on a wall, ensure the TV is at
least 5cm from the wall for ventilation.
Always ensure that the TV’s ventilation openings
are not covered with items such as newspapers, table-cloths, curtains, etc.
Dispose of this television and any components
including batteries in an environmentally friendly manner. If in doubt, please contact your local authority for details of recycling.
Ensure this TV is used in moderate climates only.
WARNING: Never place a television set on an unstable location. A television set may fall, causing serious personal injury or death. Many injuries, particularly to children, can be avoided by taking simple precautions such as:
Use cabinets or stands recommended by the
manufacturer of the television set.
Only use furniture that can safely support the
television set.
Ensure the television set is not overhanging the edge
of the supporting furniture.
Do not place the television set on tall furniture
(for example, cupboards or bookcases) without anchoring both the furniture and the television set to a suitable support.
Do not place the television set on cloth or other
materials that may be located between the television set and supporting furniture.
Please educate children about the dangers of
climbing on furniture to reach the television set or its controls.
If your existing television set is being retained and
relocated, the same considerations as above should be applied.
Safety
For your safety, this appliance is fi tted with a
fused 3 pin mains plug. Should the fuse need to be replaced, ensure that any replacement is of the same amperage and approved with the BSI mark.
Never try and replace the mains plug unless you have
adequate qualifi cations and are legally authorised to do so. In the event that a replacement mains cable is required, contact the manufacturer for a suitable replacement.
Never use the television if it is damaged in any way.
Always place the television on a fl at level surface
avoiding anywhere which may be subject to strong vibration.
The ideal distance to watch the television is
approximately fi ve times the length of the diagonal measurements of the TV screen.
Ensure the television is not placed on top of the
power cable as the weight of the television may damage the cable and cause a safety hazard.
Never place mobile phones, speakers or any
other device which may cause magnetic or radio interference, near the television. If interference is apparent, move the device causing the interference away from the television.
To disconnect the set from the mains, remove the
mains plug from the socket.
Ensure that the mains plug is always easily accessible.
WARNING: Excessive volume when using earphones and headphones can cause loss of hearing.
4
Important safety instruction
Maintenance
To clean your TV, wipe with a soft, dry cloth. If the
surfaces are extremely dirty, use a soft cloth dipped in a soap and water solution or a weak detergent solution.
Never use alcohol, paint thinner or benzene to clean
this unit.
Before using a chemically treated cloth, read the
instructions that came with the cloth carefully.
CAUTION: If water or other liquid enters the television through the display panel surface, a malfunction may occur.
Packaging
The safest way to transport your item is in the
original box/packaging - please save your packaging for this.
You will need the original box/packaging in the
event of warranty/service repair or support. We are unable to carry out warranty/service if you are unable to package the item correctly.
Time displays.
Teletext: Do not view a stationary page for a long
period of time
TV/DVD menus: e.g. listings of DVD disc content.
Pause mode: Do not leave the TV in pause mode
for long periods of time, e.g. when watching DVDs or videos.
Important: Once ‘shadow image/screen burn’ occurs, it will never disappear and is not repairable under warranty.
How do I dispose of this product?
UK: Waste electrical products should not
be disposed of with household waste. Please dispose of the product at a designated collection point for recycling of WEEE. For your nearest facilities, please see www.recycle-more.co.uk or in store for details.
ROI: Waste electrical products should not be disposed of with household waste. Separate disposal facilities exist. Check with your local authority or retailer for recycling advice.
Batteries
Do not expose batteries to high temperatures,
excessive heat, prolonged sunshine or fi re as this may cause leakage, explosion or ignition. Observe the correct polarity when inserting batteries.
Do not use different types of batteries together or
mix old and new batteries.
Dispose of batteries in an environmentally
friendly way.
Certain regions may regulate the disposal of
batteries. Please consult your local authority.
Cd
Important information regarding use of video games, computers, captions or other  xed image displays
The extended use of  xed image program material can cause a permanent “shadow image” on the LCD/LED panel, also known as “screen burn”.
This “shadow image” can appear in the background during normal viewing. This type of irreversible LCD/LED panel deterioration can be limited by observing the following steps:
1. Reduce the brightness/contrast setting to a minimum suitable viewing level.
2. Do not display the  xed image for extended periods of time.
3. Turn the power o when not in use.
Examples of images that are more likely to cause “screen burn” are as follows (this is not an exhaustive list):
TV channel logos: e.g. shopping channel logos and
pricing displays - especially if they are bright and stationary. Moving or low-contrast graphics are less likely to cause ageing of the screen.
55
Trademarks
The terms HDMI and HDMI High-De nition Multimedia Interface, and the HDMI Logo are trademarks or registered trademarks of HDMI Licensing, LLC in the United States and other countries.
HDTV
The “HD TV” Logo is a trademark of DIGITALEUROPE.
HDTV 1080p
The “HD TV 1080p” Logo is a trademark of DIGITALEUROPE.
DVB
The DVB logo is the registered trademark of the Digital Video Broadcasting (DVB) project.
FREEVIEW HD
The FREEVIEW HD words and logos are trade marks of DTV Services LTD. © DTV Services Ltd.
SAORVIEW
SAORVIEW is a registered trademark owned by RTÉ.
Manufactured under license from Dolby Laboratories. Dolby, Dolby Audio and the double-D symbol are trademarks of Dolby Laboratories.
The “CI plus” Logo is a trademark of CI Plus LLP.
YouTube
YouTube and the YouTube logo are trademarks of Google Inc.
Wi-Fi
The Wi-Fi CERTIFIED Logo is a certi cation mark of the Wi-Fi Alliance.
Harman / Kardon
Harman Kardon is trademark of HARMAN International Industries, Incorporated, registered in the United States and/or other countries.
Miracast
Wi-Fi CERTIFIED Miracast and Miracast are trademarks of Wi-Fi Alliance.
DLNA
DLNA, the DLNA Logo and DLNA CERTIFIED are trademarks, service marks, or certi cation marks of the Digital Living Network Alliance.
CE Statement:
Hereby, Universal Media Corporation l.t.d. declares that this LED TV is in compliance with the essential requirements and other relevant provisions of Dirrective 1999/5/EC.
http://www.sharp.eu/av/documents-of-conformity
6
CONTENTS
Manufacturers guarantee information . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3
Important safety instructions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4-5
Trademarks . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6
What is included in the box . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8
Attaching / detaching the stand . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9
Securing the TV to a wall / wall mounting . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10
Remote control . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11
Connections . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14-17
Connecting the TV to the Internet
Picture menu . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 20-21
Sound menu . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 22-23
Channel menu . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 24
Time menu . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 26
Lock menu . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 27
Settings menu. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 28
More Apps Menu . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 29-30
Media menu . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 30-31
7 day TV guide and channel list . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 32
USB record - Freeview / Saorview . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 33
General information . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 34-42
Frequently asked questions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 34-35
Technical specifi cations . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 36-42
TV buttons and Input Source menu . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 19
TV menu operation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 20-31
Network Menu . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 25
For DTS patents, see http://patents.dts.com. Manufactured under license from DTS Licensing Limited. DTS, the Symbol, & DTS and the Symbol together are registered trademarks, and DTS TruSurround is a trademark of DTS, Inc. © DTS, Inc. All Rights Reserved.
77
What is included in the box
WHAT IS INCLUDED IN THE BOX
Accessories
Included with this TV are the following accessories.
1 x User guide
User guide
1 x Quick start guide
Quick start
guide
1 x TV
1 x Remote Control and 2 x AAA Batteries
1 x Mini composite / AV cable
1 x Mini component / YPbPr cable
1 x Stand installation pack
4 x
1 x RF cable
Please save your box/packaging as you will need this in the event of warranty/service repair or support. We are unable to carry out warranty/service if you are unable to package it correctly. The safest way to package your item in the event of warranty/service repair is in it’s original box/packaging.
1 x L (left)
1 x R (right)
8
Attaching/detaching the stand
ATTACHING THE STAND
Attaching the stand/feet
To complete the stand/feet installation you will require a cross head screw driver.
Screws that are included.
4 x
TV panel must be facing downwards.
(fi g.1) Place the TV set on a fl at and
R
clean surface with the panel facing downwards to avoid damage, then fi x the stand/feet shown. The feet are
marked L (left) and R (right).
1
L
(fi g.2) When the stand feet are installed correctly, the stand/feet will be angled away from each other at the front of the TV set.
2
3 4
(fi g.2) Secure the stand/feet to
R
1
2
3
L
4 x
the underside of the TV set using the 4 screws provided.
Detaching the stand
Remove the screws highlighted then remove the stand/feet from the underside of the TV set.
99
Securing the TV to a Wall/Wall Mounting
SECURING THE TV TO A WALL
Securing the TV to a wall with anti-tip straps
For maximum security in the home when using a TV with its stand anti-tip straps should be fi tted. These are available from supermarket websites and other websites and are an easy, inexpensive and effective way of ensuring your TV stays safely upright. Straps are designed to be attached to the rear of the TV and then tethered to the wall or the furniture the TV is stood on.
Note - Please ensure that children do not climb on the TV set.
A) Using one or both of the top wall-mounting holes and screws (the screws are already supplied in the wall mounting holes) fasten one end of the fastening cord/s to the TV.
The Royal Society for the Prevention of Accidents is urging people to take care with fl at-screen televisions.
RoSPA stated in 2010 that “Toddlers are particularly at risk of pulling fl at-screen televisions on to themselves. They are unsteady on their feet and are attracted by colourful television images.”
The risk is increased as televisions become lighter.
Wall Mounting
IMPORTANT - Before drilling any holes in the wall ensure you are not drilling where there could be any electrical wires, water or gas pipes.
1) Remove the four screws highlighted that are supplied in the wall mounting holes.
2) The wall mount can now be easily attached to the mounting holes on the rear of the TV.
For VESA wall mounting information please refer to the Technical Specifi cation page.
For optimum viewing, if wall mounting the TV higher than eye level, the TV should be tilted downwards so that the TV’s screen is ‘face on’. See fi g 1 and 2.
g 1 fig 2
INCORRECT
TV
B) Secure the other end of the fastening cord/s to your wall. (you will need screws/fi xings suitable for your wall type - available separately from most DIY stores).
CORRECT
TV
Viewing angle
Important – If wall mounting this TV, only use the screws already provided in the wall mounting holes. Using other screws which are longer could cause irreparable damage to internal parts. When using a wall bracket, please ensure the screws in the back of the TV set are not over tightened.
Viewing angle
10
REMOTE CONTROL
REMOTE CONTROL
Remote control
Key
For models with integrated DVD players. For models with PVR Function. For models with USB Playback. For models with 3D functions.
1
STANDBY - Switch on the TV when in standby or vice versa. NETFLIX - Access the Netfl ix application.* MUTE - Mute the sound or vice versa.
2
NUMBER BUTTONS - 0–9 to select a TV channel directly. TV GUIDE - Opens the 7 day TV guide (digital TV mode).
- To return to the previous channel viewed.
YOUTUBE - Access the Youtube App. NET+ - Access the Aquos Net application. SOURCE - To display the input/source menu. TV - Switches to the Digital TV source.
3
VOL (+/-) - To increase/decrease the sound level. FAV - To display favourites menu. INFO - Press once for now/next channel information.
- Press twice for information about the current programme.
CH (+/-) - To increase or decrease the channel being watched. SUBTITLE - To switch the dialogue at the bottom of the screen (on/off). TEXT - To enter/exit Text.
4
MENU - To display OSD menu. BACK - To go back a previous step. EXIT - To exit all menus.
adjust the system settings to your preference. When there is no menu displayed on the screen, you will be able to adjust the picture/sound settings on the TV, use the the
- Allows you to navigate the on-screen menus and
button to change the picture settings and
button to change the sound settings.
1
2
3
4
5
5
- To restart the current chapter
- To advance forward to the next chapter
- To stop the playback/Eject Disc
(To EJECT the disc press/hold the button for 4 seconds)
- To play in fast rewind mode
- To play in fast forward mode
- To play/pause
RECORD - Access the USB record function. REC LIST - Opens the list of what has been previously recorded.
Buttons to use when pairing the remote control to the TV.
*Netfl ix is only available on selected models. Please visit www.umc-uk.co.uk/sharpnetfl ix for more details.
If the remote control does not function with the TV, the remote control may need to be paired with the TV set, please refer to the ‘Frequently Asked Questions’ pages for more information.
1111
TV Buttons and Input Source Menu
TV BUTTONS AND INPUT SOURCE MENU
1
2
3
4
5
6
7
Volume up and menu right
1
Volume down and menu left
2
Programme/channel up and menu up
3
Programme/channel down and menu down
4
Displays menu/OSD
5
Displays the ‘Input Source’ menu
6
Standby power On/Off
7
Note: The shape of the TV buttons may vary by model.
Choosing Mode Input/Source
Use the source menu to switch between input/connections.
A) Using the buttons on the remote control:
1) Press [SOURCE] - The source menu will appear.
2) Press [\/] or [/\] to select the input you require.
3) Press [OK].
B) Using the buttons on the Television:
1) Press [SOURCE].
2) Scroll up / down using CH+/ CH- buttons to the input/source you require.
3) Press Vol+ to change input/source to the one selected.
For further information on input/connections please view ‘Connections’ pages.
An example of the ‘Input Source’ menu
(will vary by model)
1313
Connections
CONNECTIONS
Input/Outputs for the 32”, 40” and 43” models only.
ARC
ETHERNET
A
A
Ethernet/LAN* Network Connection
B
HDMI 1 HDMI input
C
HDMI 2 (ARC) HDMI input
D
VGA PC VGA-PC input
E
VGA PC Audio In 3.5mm PC audio input
F
SCART SCART input
RF IN RF / TV Aerial Input
G
SAT IN** Satellite input
H
1
B
5V 500mA MAX

USB (2.0)
J
2
C
EARPHONE
LK
VGA/PC In
D E
M
VGA/PC (Audio In)
SCART
F
CI CARD IN
YPbPr INAV IN
O
N
Optical Digital Audio Digital Audio output
I
HDMI 3 (MHL)*** HDMI input
J
2 x USB USB port
K
Earphone Earphone output
L
AV IN Audio/Video Input
M
YPbPr HD input (Ypbpr)
N
CI CARD IN Common Interface module
O
RF IN SAT IN
G
DIGITAL AUDIO OUT
OPTICAL
H
I
* The Ethernet/LAN port is used for Freeview HD services and smart functions.
**The Satellite input is for the LC-32CHG6242K, LC-32CFG6242K, LC-40CFG6242K and LC-43CFG6242K models only.
*** HDMI 3 (MHL Port) - MHL is a wired solution that allows you to access the media from your phone or tablet onto the big screen in the highest quality. By connecting an MHL cable (sold separately) from your mobile device and into your TV you can playback all your videos, games and photographs directly onto your TV. MHL simply mirrors the screen of your mobile device so will work with all applications, whilst connected it will also charge your device too.
14
CONNECTIONS
Input/Outputs for the 49” and 55” models only.
Connections
ARC
ETHERNET
A

B
5V 500mA MAX
USB (2.0)
1
C
EARPHONE
JK
A
Ethernet/LAN* Network connection
B
HDMI 1 HDMI input
C
HDMI 2 HDMI input (ARC)
D
AV IN Audio/Video input
E
YPbPr HD input (YPbPr)
F
SCART SCART Input
RF in RF / TV aerial input
G
AV IN
2
D
SD CARD IN
L
M
YPbPr IN
CI CARD IN
SCART
E
F
RF IN SAT IN
GHI
N
SAT IN** Satellite input
H
I
Optical Digital Audio Digital Optical Audio Output
J
HDMI 3 HDMI input***
K
USB x 2 USB port
Earphones Earphone output
L
M
CI card in Common interface module
SD Card IN SD Memory Card Input
N
DIGITAL AUDIO OUT
OPTICAL
* The Ethernet/LAN port is used for Freeview HD services and smart functions.
**The Satellite input is for the LC-49CFG6242K and LC-55CFG6242K models only.
*** HDMI 3 (MHL Port) - MHL is a wired solution that allows you to access the media from your phone or tablet onto the big screen in the highest quality. By connecting an MHL cable (sold separately) from your mobile device and into your TV you can playback all your videos, games and photographs directly onto your TV. MHL simply mirrors the screen of your mobile device so will work with all applications, whilst connected it will also charge your device too.
1515
Connections
CONNECTIONS
Note: Connecting cables are shown for example only and may not be included. Please check ‘What Is Included In The Box’ page.
Connecting to a device with Composite AV/Video output
TV Source should be set to Composite/AV
L (white)
R (red)
Mini AV in
Connecting to a device with SCART output
TV source should be set to SCART
Video (yellow)
Scart
Scart
Connecting to a device with HDMI output
A HDMI cable can output both video and audio and enables you to enjoy digital-quality video and audio with minimal loss of quality.
TV Source should be set to the corresponding HDMI port (HDMI 1, HDMI 2 etc)
HDMI 3 (MHL Port) - MHL is a wired solution that allows you to access the media from your phone or tablet onto the big screen in the highest quality. By connecting an MHL cable (sold separately) from your mobile device and into your TV you can playback all your videos, games and photographs directly onto your TV. MHL simply mirrors the screen of your mobile device so will work with all applications, whilst connected it will also charge your device too.
16
Connections
CONNECTIONS
Connecting to a device with Component/YPbPr output
If you are supplied with a cable from the device which has RED, GREEN, BLUE, RED & WHITE connectors you must connect via Component (for picture) and by phono cable (for sound).
TV Source should be set to Component/YPbPr
Y (green)
Mini
YPbPr
Mini AV in
Video (yellow) is not connected
Connecting to an external audio device (Amplifi ers, Surround Sound, Sound Bars etc)
When connecting via the TV’s 3.5mm Earphone output, this will disable the TV speakers.
There are two options when connecting a device via the 3.5mm Earphone Output and the Digital Optical Audio Output
PB (blue)
PR (red)
L (white)
R (red)
3.5mm
earphone
Digital
audio
out
(optical)
OPTION 1 for 3.5mm EARPHONE Output
OPTION 2 for Digital Optical Audio Output
3.5mm audio
in
Digital
audio
(optical)
in
Connecting an Ethernet/Network cable
The Ethernet/LAN port is used for Freeview HD services and smart functions.
Ethernet port
Ethernet port
Connecting to a device with VGA/PC output (Laptop or Desktop Computer)*
TV Source should be set to VGA/PC *VGA/PC Connection for the 32”, 40” and 43” models only
VGA/PC
in
VGA/PC
(audio
in)
VGA/PC
out
Audio
out
1717
Connecting the TV to the Internet
CONNECTING THE TV TO THE INTERNET
When you fi rst power on your new SMART TV there will be an option to follow various on-screen set up instructions. These instructions will enable you to connect to the internet via your home network. You can connect to your home network either wirelessly or with an Ethernet cable.
If you decide not to follow the initial set up instructions and need to connect at a later date please follow these simple steps below:
Connecting your TV with a wireless connection
1) Press Menu on the remote control (fi g.1).
2) Scroll through the menu, select ‘Settings’ then enter the ‘Network’ menu.
3) in the ‘Network’ menu, example below, scroll down and select ‘Wi-fi Confi g’ (fi g.2).
4) Within the ‘Wi-Fi confi g’ options, highlight and select ‘Wi-Fi Auto Search’.
5) The TV will then automatically search for networks.
6) Select the preferred type of network connection then enter the network (a password* may be required).
7) The TV will then establish a connection.
*If a padlock is shown next to a WiFi service, this indicates that it is a secured network and will require a password to log in. When entering the WiFi password, we recommend using the “Password Visible” feature. When asked for a network password, using the remote control, scroll down and highlight “Password Visible” and press “OK”, the password will then be displayed in full. Network passwords are case sensitive, please ensure the entered text matches the password exactly for a successful connection.
An icon will appear in the top right hand side of the ‘Application’ menu to confi rm the TV is connected to the internet.
Connecting your TV with an Ethernet/LAN cable:
1) Plug in your Ethernet cable into the RJ45 (Ethernet) socket located at the rear of the television.
Ethernet port
2) Press Menu on the remote control. (fi g.1)
3) Scroll through the menu, select ‘Settings’ then enter the ‘Network’ menu.
4) In ‘Network Confi gurations’, select ‘Cable’.(fi g.2).
5) Set will automatically confi gure itself.
6) Exit the menu by pressing ‘EXIT’ on the remote control.
fi g.1
fi g.2
1919
TV Menu Operation
PICTURE MENU
To access this menu, press [MENU] button on the remote control and scroll right. To select a sub menu press [OK].
If you wish to make changes to any of the default settings, use the scroll buttons. To confi rm any settings press [OK] button. To exit this menu at anytime, press [EXIT] button.
Picture Mode - Choose from the following presets:
Dynamic Recommended settings for fast moving pictures
Standard Standard settings
Movie Set to be lighter in colour and less bright
Personal Lets you manually alter all the settings
Economy Power saving mode which reduces the energy used by up to
25% (by reducing the power to the LED/LCD panel).
In Economy mode, the TV will switch itself to Standby mode
after 3-5 hours in the event that the TV buttons or remote
control buttons are not pressed (change the picture mode
to another setting to de-activate this function)
You can make the following adjustments in
Contrast - Switch the balance between black and white.
Brightness - Increase or decrease the brightness of the picture.
Colour - Increases the colour from black and white.
Tint - Lets you increase or decrease the level of tint within the picture
(only available for NTSC source signal).
Sharpness - Increase or decrease the sharpness of the picture.
Colour Temperature - Choose from the following presets:
Normal Default settings
Warm Increases red within the picture
Cold Increases blue within the picture
Personal mode:
20
TV Menu Operation
PICTURE MENU
Aspect Ratio - Within the UK the picture format varies depending on the channel/broadcast. There are a
number of different options to best meet your needs. Choose from the following settings:
Auto
Automatically displays the best picture format so the picture is in the correct position, black lines maybe viewable at the top/bottom and/or sides.
4:3
Displays the 4:3 picture in its original size. Side bars are shown to fi ll the 16:9 screen
Full Screen
Displays a picture in the full screen size without overscan. 16:9 signal will be displayed in original proportion. Other picture format will be stretched to fill the screen
Zoom1 and Zoom 216:9
Fills the screen with a regular 16:9 signal and 4:3 picture format will be stretched to fi ll the screen
The picture is the correct proportion but zoomed in to fi ll the screen
PC Menu - Allows you to adjust the picture settings of the TV when being used with a PC/Laptop.
Only available when the TV is in VGA/PC source mode. (For use with the 32”, 40” and 43”models only).
Noise Reduction - Allows you to switch noise reduction ON or OFF. Choose one of the following presets:
low, middle, high and Off.
Active Contrast - Automatically optimises the ‘backlight’ and ‘contrast’ of the picture according to the
brightness of the screen. Choose one of the following presets: low, middle, high and Off.
2121
TV Menu Operation
SOUND MENU
To access this menu, press [MENU] button on the remote control and scroll right. To select a sub menu press [OK].
If you wish to make changes to any of the default settings, use the scroll buttons. To confi rm any settings press [OK] button. To exit this menu at anytime, press [EXIT] button.
Sound Mode - Choose from the following presets
Standard Default settings
Music Emphasises music over voices
Movie Provides live and full sound for movies
Sports Emphasises sound for sports
Personal Selects your personal sound settings. Any adjustments made automatically sets the sound mode to
Personal.
EQ - Adjust the audio level of separate frequencies via the band equaliser.
Balance - To switch the sound between the left and right speakers.
Auto Volume Level (AVL) - When ‘on’ is selected, the volume will attempt to stay at a constant level
regardless of TV programme and advertisements.
DTS TruSurround - Choose from the following options:
Off Off
TruSurround TruSurround
from two speakers, complete with rich bass, high frequency detail and clear dialog
For DTS patents, see http://patents.dts.com. Manufactured under license from DTS Licensing Limited. DTS, the Symbol, & DTS and the Symbol together are registered trademarks, and DTS TruSurround is a trademark of DTS, Inc. © DTS, Inc. All Rights Reserved.
TM
creates an immersive, feature-rich surround sound experience
22
TV Menu Operation
SOUND MENU
To access this menu, press [MENU] button on the remote control and scroll right. To select a sub menu press [OK].
If you wish to make changes to any of the default settings, use the scroll To confi rm any settings press [OK] button. To exit this menu at anytime, press [EXIT] button.
Digital Output - This is the digital optical audio output. Choose from the following options:
Off To turn off Digital Output
Auto Selects the best settings automatically
PCM Select this option if you are connecting to a Stereo Hi-fi via optical cable (Pulse-code
modulation (PCM) is a digital representation of an analogue signal)
Audio Description - This allows the user to switch Audio Description ON or OFF. (Audio Description is
a service available on certain programmes. It provides a description of what is happening during the
selected programme for a person who is visually impaired).
AD Volume - This allows the user to increase and decrease the AD (Audio Description) volume level.
Audio Track - This allows the user to change the audio language.
Audio Delay - Enables the user to adjust setting to sync picture and audio.
SPDIF Delay - Enables the user to adjust sound setting to sync picture and audio for external speakers
connected via digital audio output.
Tip: Equaliser settings can only be adjusted when the sound mode ‘Personal’ is selected.
buttons.
2323
TV Menu Operation
CHANNEL MENU
This menu is part of the ‘Settings’ menu, To access the ‘Settings’ menu, press the [MENU] button on the remote control, scroll right and select ‘Settings’ by pressing [OK].
If you wish to make changes to any of the default settings, use the scroll To confi rm any settings press [OK] button. To exit this menu at anytime, press [EXIT] button.
Auto Tuning - Allows you to retune the television for all digital channels, digital radio stations and
analogue devices.
Analogue Manual Tuning - Allows you to manually tune your analogue signal.
Freeview/Saorview Manual Tuning* - Allows you to manually tune your digital signal.
Freeview SMART Retune - This feature allows you to scan for Freeview channels. When new channels are
found they are automatically added to your channel list without removing any channels or affecting your
favourites list.
Channel Edit - Allows you to delete, move, skip and select favourite channels.
Important: To receive Freeview/Saorview channels, in particular HD channels, you will need a Digital TV aerial and be in a good Freeview/Saorview coverage area. You can check the coverage for your area at www.freeview.co.uk or www.saorview.ie
Please note that any Freeview HD channels found during tuning will be placed in channel positions above 100. For example, 101 (BBC1 HD) 102 (BBC2 HD) etc.
*Freeview channels are only available in the UK, Saorview channels are only available in the ROI.
Signal Information - Allows you to view signal frequency, signal quality and signal strength.
CI Information - Pay per view services require a “smartcard” to be inserted into the TV. If you subscribe to
a pay per view service the provider will issue you with a ‘CAM’ and a “smartcard”. The CAM can then be
inserted into the COMMON INTERFACE PORT (CI Card In).
Schedule List - Lists your programme reminders.
Software Update (OAD) - Switch on/off OAD (over air download) software updates.
OAD Scan - Scan for (over air download) software updates.
buttons.
Tip: If you do not press any buttons for 30 seconds, the menu will automatically exit. You can change the length of time before the menu exits automatically - see ‘OSD Timer’ in the Time Menu
24
TV Menu Operation
NETWORK MENU
This menu is part of the ‘Settings’ menu, To access the ‘Settings’ menu, press the [MENU] button on the remote control, scroll right and select ‘Settings’ by pressing [OK].
If you wish to make changes to any of the default settings, use the scroll buttons. To confi rm any settings press [OK] button. To exit this menu at anytime, press [EXIT] button.
The Network connection enables you to update the TV software and a number of Smart TV functions.
For the network confi guration to work the TV will need to be connected to your home network via an ethernet cable, with these requirements in place the TV will connect to the network automatically.
Network Confi guration - Allows you to select either Cable or Wifi connection.
WIFI / IP Confi g - Allows you to access LAN network connection settings. Choose from the following options:
Auto Will automatically connect the TV to your home network(this is the default setting
and is highly recommended)
Manual Allows you to manually change the IP, Netmask, Gateway and DNS information.
WIFI Confi g - If WIFI is selected during fi rst time installation process.
Wi-Fi Confi guratrion Wireless network connection settings
Wi-Fi Auto Search Automatically searches for available wireless networks. Select the desired
Wi–Fi network and then enter the network password (if network is password
protected). Once the password is accepted, you will not be asked for it again.
Network Info - Allows you to view Information about network settings.
Network Test - Allows you to test the network connection.
Wifi Status - Allows you to view information regarding the Wifi /Network connection.
2525
TV Menu Operation
TIME MENU
This menu is part of the ‘Settings’ menu, To access the ‘Settings’ menu, press the [MENU] button on the remote control, scroll right and select ‘Settings’ by pressing [OK].
If you wish to make changes to any of the default settings, use the scroll buttons. To confi rm any settings press [OK] button. To exit this menu at anytime, press [EXIT] button.
Auto Sync - Automatically sets the time and date on the TV set. Requires the TV to be tuned in with a
digital signal and/or an internet connection. Turn “Auto Sync” off to manually adjust the time and date
settings. If “Auto Sync” is set to off with the time and date manually adjusted, this information will be
reset when the power to the TV is disconnected.
Clock - Shows the date and time. Can be adjusted when “Auto Sync” is set to off.
Off Time - Allows you to set aspecifi c time for your TV to turn off.
On Time - Allows you to set aspecifi c time for your TV to turn on, the channel it will then display, the
source it will be on and also the volume. This function can then be toggled to repeat every day or
acertain day.
Sleep Timer - Lets you set the sleep timer so the television automatically switches off after a set amount
of time. Off -> 10min -> 20min -> 30min -> 60min -> 90min -> 120min -> 180min -> 240min.
OSD Timer - Lets you adjust the amount of time the On Screen Menu stays on the screen
before disappearing. Off -> 5secs -> 15secs -> 30secs -> 60secs.
Auto standby - Set ‘Auto Standby’ to OFF, 3 hours, 4 hours or 5 hours.
Time Zone - Change your current time zone.
26
TV Menu Operation
LOCK MENU
This menu is part of the ‘Settings’ menu, To access the ‘Settings’ menu, press the [MENU] button on the remote control, scroll right and select ‘Settings’ by pressing [OK].
If you wish to make changes to any of the default settings, use the scroll buttons. To confi rm any settings press [OK] button. To exit this menu at anytime, press [EXIT] button.
System/Hotel Lock - Allows you to lock or unlock the menu. You will be asked to enter a 4 digit password
button to quit the password input or use the button to clear. Default password is 0000.
Use the
Change Password - Allows you to change the password.
Channel Lock - Allows you to lock certain channels manually.
Parental Guidance - Allows you to set the rating to block certain content based on age information
Default Source - Allows the user to set the default source. The default source is the source the TV starts on
when fi rst switched on.
Default Channel - Allows the user to set a channel as the default channel on the Digital source. The
default channel is the channel the TV starts on when fi rst switched on.
Max Volume - Allows you to adjust and set the maximum volume.
Source Lock - Allows you to lock the source menu.
2727
TV Menu Operation
SETUP MENU
This menu is part of the ‘Settings’ menu, To access the ‘Settings’ menu, press the [MENU] button on the remote control, scroll right and select ‘Settings’ by pressing [OK].
If you wish to make changes to any of the default settings, use the scroll buttons. To confi rm any settings press [OK] button. To exit this menu at anytime, press [EXIT] button.
Language - Allows you to change the language of the menu.
Audio Language - Select your preferred primary audio language.
Audio Language 2 - Select your preferred secondary audio language.
Subtitle Language - Select your preferred primary subtitle language.
Subtitle Language 2 - Select your preferred secondary subtitle language.
Hearing Impaired - This allows the user to turn on the Hearing Impaired function, this produces subtitles
on the screen which provide a description of what is happening during the selected program.
Blue Screen - Changes the background when there is no input between clear and a blue background
(only available on some sources).
First Time Installation - Allows you to access the First Time Installation menu and retune the TV set.
Software Update (USB) - Allows you to update your TV with the newest software using a USB memory
stick. Software and instructions are available on our website.
Software Update (NET) - Allows you to update your TV with the newest software via your internet
connection.
Reset TV - This resets the menus to factory settings and clears all the TV channels from the television.
HDMI CEC (Consumer Electronic Control) - Allows HDMI devices to control each other and allows the user
to operate multiple devices with one remote control (only available with compatible devices).
LED Status - LED Status - Allows the user to switch the LED power indicator light ON or OFF when the TV
is being operated.(When this option is set to OFF the LED power indicator light will fl ash when the remote
control is used and will fl ash red during the normal start up process).
Standby Scan - When the TV is put into standby mode a standby scan will be performed, during this
process the TV will scan for new channel information and automatically update the channel list if any
changes are found, both the visual and audio functions will be off, once the scan is complete the TV will
stay in standby mode.
Version Info - Allows you to view the version/information of the software installed on the TV set.
Note: For further support with software updates, contact our technical support team or refer to the ‘product support’ section of the website. If the TV is using the newest software available it will not attempt to update the software.
28
TV Menu Operation
MORE APPS MENU
To access this menu, press [MENU] button on the remote control and scroll right. To select a sub menu press [OK].
If you wish to make changes to any of the default settings, use the scroll buttons. To confi rm any settings press [OK] button. To exit this menu at anytime, press the ‘MENU’, ‘EXIT’ or ‘BACK’ button on the remote control.
The Application Menu allows you to access the TV set’s “SMART” features. In this menu you can enter
various functions including Youtube, Facebook, etc. At the bottom of the screen there are some key apps
for easy and quick access.
Aquos Net+
Aquos Net+ is a portal to a variety of apps and multimedia which the TV acesses via the internet.
To enter Aquos Net+ you will be prompted to enter a language and acccept terms and conditons. once
the relevant information has been entered you will be able to use a range of features such as MUZU.TV,
Viewster and Dailymotion.
Content is updated and managed from a central source, so look out for new features and updates.
Note: If you wish to reset the settings for AQUOS NET+ Smart Portal back to the default settings, you will need to access the AQUOS NET+ Smart Portal and enter the settings menu. In the settings menu scroll down and select ‘reset your device’, you will then be asked ‘Yes’ or ‘No’ to confi rm your decision, highlight ‘Yes’ and press ‘OK’ on the remote control to complete the reset process.
2929
TV Menu Operation
MORE APPS MENU
Applications
BBC News - Access the BBC News app for up-to-the-minute and breaking news reports. BBC Sport - The BBC Sport app offers the latest sports news, live action, scores and highlights. Twitter
- Online social networking service that enables users to send and read short 140-character messages called “tweets”.
Weather - keep track of the weather by using the weather forecasting app, AccuWeather. Facebook - The popular social networking website that allows registered users to create profi les, upload
photos and videos.
Web Browser - Application for accessing websites via the internet. Use the following buttons for
navigation in the browser:
CH+ Scroll page up,
CH- Scroll page down,
Red Button Show/hide browser menu bar
Yellow Button Zoom in
Blue Button Zoom out
Note: The BBC iPlayer and YouTube apps are included within the main menu for quicker access, they are not included in the “More Apps”menu.
MEDIA MENU
Miracast (Screen mirroring)
The Miracast (screen mirroring) feature allows you to connect to a compatible external device such as a laptop, tablet and/or smart phone. Once connected, your device will mirror all its content on to the TV, this allows you to view photos, emails and This allows almost unlimited applications including many video on demand and subscription based services, for example Blinkbox, Netfl ix and Amazon, to be played on your smartphone or tablet and at the same time wirelessly ‘streamed’ and viewed on the TV.
Many Android and Windows devices include ‘Screen Mirroring’ as standard. Apple devices do not currently allow it, however, it is possible to ‘mirror’ from your Apple smart phone or IPad etc. when used with an Apple TV box (available separately).
Some newer / higher spec smartphones, tablets, laptops & computers may include Intel’s technology, called WiDi (Wireless Display), WiDi allows you to wirelessly ‘mirror’ content from your WiDi equipped device directly on to the TV’s screen.
Note: If your smartphone or tablet does not include ‘Mirroring’, it may be possible to connect a suitable cable from your device directly to one of the HDMI inputs on the rear of the TV (for example, if your device supports video output and has a Micro USB socket, you can purchase a Micro USB to HDMI cable from your retailer).
30
TV Menu Operation
MEDIA MENU
USB mode and media server
The USB media and the media server offer the playback of various different types of content that is either saved on your USB memory stick or external media server. (USB mode allows you to view/playback fi les from an external USB device and Media Server connects to your home network and can view/playback fi les from your laptop, PC, tablets and smart phones).
When accessing the USB media or media server features the below menu screen will appear. The content will be divided into Photo, Music, Movie and All.
1) You can navigate through the menus using the scroll
to confi rm the item you wish to play/view press the [OK] button.
3) You can now access the item. Press OK to view.
Tip: If you experience a playback issue, please ensure the fi les being used are the correct format (example - the picture plays but no sound) See technical specifi cation page for compatible fi le types
Note: USB extension cables are not recommended as they can cause a reduction in picture/audio quality and stoppages during play back of USB content.
buttons on the remote control,
2)
USB mode - Select the USB drive (If your drive
only has 1 partition you will only see 1 item)
Media server - Select the external device
that you would like to access.
4) Whilst viewing your media, you can control the item by using the remote control buttons (below) or by pressing (Info) to access the on-screen playback menu, you can now make your selection by using the and (OK) buttons on the remote control.
Fig.A
3131
7 Day TV Guide and Channel List
7 DAY TV GUIDE
TV Guide is available in Saorview/Freeview TV mode. It provides information about forthcoming programmes (where supported by the Saorview/Freeview channel). You can view the start and end time of all programmes and on all channels for the next 7 days and set reminders.
1) Press [TV GUIDE] on the remote control, the following 7 Day TV Guide will appear.
2) Navigate through the menu using
You can now:
Record a programme by pressing RED (USB device must be connected) Set a reminder by pressing GREEN View a previous day by pressing YELLOW View the next day by pressing BLUE
3) Press [EXIT] to exit the 7 day TV Guide
.
Channel List
To view the channel list, please ensure that the TV is set to either the analogue or digital source and no menus or TV notifi cations are displayed.
1) Press [OK] on the remote control and the channel list menu will appear.
2) Press LEFT / RIGHT arrow to fi lter desired channel types (Digital TV, HD channels, Radio, Data, All).
3) Scroll through the channel list by using press [OK] to view the channel that is currently highlighted.
4) Press [EXIT] to exit the channel list.
buttons then
32
USB Record - Freeview/Saorview
USB RECORD  FREEVIEW/SAORVIEW MODE
Built into this television is a USB record facility. This function is available in Freeview/Saorview mode when used in conjunction with a compatible USB memory stick or USB hard drive. The benefi ts of this are as follows:
Pause live TV and then playback, fast forward and rewind (up to live TV)
One button record, if you decide you want to record the current programme
Easy programmable recording from the 7 day TV Guide
Due to the nature of the product, it is necessary to use a high speed USB memory stick (as the TV reads from and writes to the memory stick at the same time, some memory sticks may not be suitable)
You can purchase high speed memory sticks from some computer stores, alternatively, we have a selection of tested and compatible memory sticks available to purchase directly from our website or contacting our technical support team.
Minimum specifi cation - USB Memory Stick
Read Speed 80 Mb/s (Megabit Per Second)
Write Speed 40 Mb/s (Megabit Per Second)
If you wish to use a USB portable hard drive larger than 32GB, please refer to the FAQ section at the rear of this user guide.
Pause live TV (time shift)
Pausing Live TV is very simple.
- Press the play/pause button and the television will pause and the live
content will be recorded. To resume watching press play/pause again.
- Press fast forward to go forward in a recording (i.e. to skip adverts)
- Press fast rewind to go back in a recording (i.e. if you fast forwarded too
far)
Tip: When you switch the TV to standby or change channel the time shift memory is wiped. To restart time shift you must press play/pause button.
One button record
At any point in time you may decide to record the current channel that you are watching. To do this you need to press the red button highlighted below.
Tip: This television contains one TV tuner, therefore it can only record the channel you are watching or record one channel while the television is in standby mode.
Note: USB record function is only available in Freeview/Saorview TV mode. Due to copyright laws and illegal copying/recording it is not possible to record to/from any other input/output source.
3333
General Information
FREQUENTLY ASKED QUESTIONS
General I would like to have louder
General Why are some options in the menu
General Can I stop my TV automatically
TV I have tuned in Digital TV but I
TV I have re-tuned my television but
VCR/DVD Recorder
Game Consoles I have connected my Playstation/
Game Consoles I have connected my Playstation/
System Lock I have changed the password
USB Mode I have inserted a USB Memory Key,
USB Mode Using a USB portable hard drive /
USB Record I cannot change the channel, access
sound by connecting additional speakers. For TV models with digital optical audio output.
unavailable and greyed out.
turning o after 4hrs?
am not receiving any or all of the channels and/or the channels I receive are breaking up.
when I switch it o it is not storing the channels.
I have connected the TV to my VCR or DVD Recorder via SCART but it is not recording.
Xbox to the TV via HDMI, but I am not receiving any pictures or sound on my TV
Xbox to the TV via Component cables (red, green & blue) but I am not receiving any sound.
on the television and now forgotten it.
but the TV does not recognise it.
larger than 32GB.
the menu or use the red button.
1) Use the 3.5mm headphone output and a 3.5mm to phono cable (available separately) to connect to an amplifi er/surround sound system. Please note this will deactivate the TV’s built in speakers.
2) Connect a digital optical audio cable from the TV’s digital optical audio output to your amplifi er/surround systems digital optical audio input.
Some options are only available in certain sources, i.e. HDMI. They are unavailable in the other sources where they have no a ect.
Yes, in the ‘Time’ menu settings, scroll down to Auto standby and select OFF.
1) Check you are in an area that can receive Freeview/Saorview, visit www.freeview.co.uk or www.saorview.ie
2) Check you are using an aerial that is able to receive a good digital signal. In most cases, you will need an outdoor digital hi-gain/wideband aerial. In areas that have excellent digital coverage, you may be able to use a loft type aerial but it is highly likely that you will also need to connect a booster between the back of the TV and the TV aerial wall socket. Unfortunately, to receive a good enough digital signal, it is not possible to use a portable/ indoor type aerial.
If the TV does not save the channels when you power it o , it’s likely the channel database has become corrupt.
1) Turn o the TV.
2) Remove the RF/Aerial cable from the rear of the TV and then turn the TV back on again.
3) Using the remote control, press Menu followed by 8-8-8-8 to enter the initial setup/ rst
time installation menu.
4) Press OK (let the TV run the full tuning process).
5) Once completed, turn o the TV, reconnect the RF/Aerial cable then turn the TV back on
again.
6) Repeat steps 3 & 4.
In addition to connecting via SCART, you should connect the aerial cable from the wall socket to your VCR/DVD Recorder and another aerial cable from the VCR/DVD Recorder to the TV.
1) Ensure the TVs’ source is set to HDMI.
2) Check your settings on your Playstation/Xbox are as per the Playstation/Xbox instruction manual.
Component cables only provide HD pictures. For the sound you will need to connect the red & white audio cables on the Playstation/Xbox to the red & white phono inputs (or mini AV input where  tted) on the rear of the TV. Please refer to the ‘Connections’ pages.
There is a master password of 4711, to gain access to the TV menu and reset the normal password.
Ensure the USB Memory Key is formatted to type FAT32.
If you wish to use a portable hard drive larger than 32GB, please note that it must be formatted to the FAT32  le system in order to operate on this TV. Windows XP/Vista computers are only capable of formatting up to 32GB, therefore, you will need a software programme/utility to format larger hard drives. Please refer to the website, www.umc-uk.co.uk, for more information.
During time shift you cannot change the channel, access the menu or use the red button.
USB Record When using the USB to record the
picture ‘breaks up’ or experience loss of sound.
34
Check the USB memory stick meets the minimum read speed requirements. Standard de nition channels require a read speed of 20 MB/s (Mega Byte per second) and a write Speed of 6 MB/s (Mega Byte per second) HD channels require the read speed of 80 MB/s (Mega Byte per second) and a write speed of 40 MB/s (Mega Byte per second). USB 3.0 sticks should normally ne used where possible.
General Information
FREQUENTLY ASKED QUESTIONS
Freeview HD I cannot access all Freeview
Freeview HD I cannot  nd the Freeview HD
Smart I cannot access Smar t apps on my
Smart I cannot access content through the
Smart I cannot access content through the
Smart While using Media Server, access is
Smart I cannot access Facebook or Twitter Ensure that you have an active account and that your network is not blocking access to
Smart The YouTube app does not work
channels.
channels.
Sharp Smart TV.
Media Server settings
Wireless Connection settings
not possible or connection is slow
and/or is erratic
Some data channels for Freeview can only be obtained when the TV ‘s ethernet port is connected to your router.
Freeview HD channels found during tuning will be placed in channel positions above 100. For example, 101 (BBC1 HD), 102 (BBC2 HD) etc.
Check your TV is connected to the internet and there is suitable signal strength. You can carry out a Network Test as follows:
1) Press Menu on the remote control.
2) Select ‘Network’ Menu then ‘Network Test’.
3) This will show the status of the internet connection.
If you have no internet connection you must re-connect your TV as follows:
1) Press Menu on the remote control.
2) Select ‘Network’ Menu then ‘Wi- con g’.
3) Then ‘Wi Auto Search’.
4) The TV will then automatically search for Networks.
5) Select the desired network then enter the Network password.
6) The TV will then connect.
Note: An icon will appear in the top right hand side of the Application page to show you if the TV is connected to the internet.
Check your TV is connected to your local network and there is suitable signal strength. Check the server devices you are trying to connect with are also on the Network and are set to share content.
Ensure the device you are trying to mirror onto the TV is correctly paired with the TV. Check the settings on the device, move your device closer to the TV set, check the user guide of the device to ensure it is compatible with this function.
If the folder you are attempting to view contains a large amount of  les, it may take a little while to load, this is normal, content may be blocked on the host PC. Recon gure the host PC to allow external access. Note: Host may not be connected to your network.
these sites.
Ensure that your network is not blocking access to YouTube and the speed of your internet connection is fast enough for viewing YouTube content.
Pairing the remote control
Pairing the remote control
Remote control does not work with the TV set when  rst time installation is on the TV screen
Remote control does not power on the TV set
During  rst time installation press and hold the YELLOW and BLUE buttons on the remote control for a few seconds. The power light will blink 5 times to con rm the TV and remote control are paired.
Switch the TV on using the standby button on the TV set (not the remote control), once switched on, press the standby button on the TV set once, this will prompt the ‘pairing menu’ to appear, scroll through and highlight ‘Pair your remote’ by pressing the CH+/CH- TV button (scroll up/down function in the menu) then press the TV set’s standby button (OK function in the menu) to con rm your selection, then with the remote control, press and hold the YELLOW and BLUE buttons for a few seconds, the power light will blink 5 times to con rm the T V and remote control are paired.
3535
General Information
TECHNICAL SPECIFICATION
Product  che
Trademark
Model ID LC-32CFG6241K, LC-32CFG6242K
Energy e ciency class A+
Visible screen size (diagonal) 81 cm / 32 inches
On-mode power consumption 31.0 W
Annual energy consumption *1 45 kWh
Standby power consumption *2 <0.50 W
O mode power consumption
Screen resolution 1920 (H) x 1080 (V)
*1: Energy consumption XYZ kWh per year, based on the power consumption of the television operating 4 hours per day for 365 days. The actual energy consumption will depend on how the television is used. *2: When the TV is turned o with the remote control/standby button and no function is active.
Sharp
n/a
Additional technical information
RF 75 ohm Antenna / Analog / DVB / Satellite*
Inputs 3 x HDMI, 2 x USB, 1 x SCART, 1 x Mini Component/YPbPr,
Sound Outputs 1 x Digital Optical Audio output, 1 x 3.5mm Headphone
Speaker** / Ampli er Watts (RMS) 2 x 10 / 2 x 8
Voltage and power consumption AC 220V ~ 240V; 50/60Hz
Dimensions including stand (mm)
Net weight (Kgs) 4.8
Wall Mounting VESA 400 x 200 (mm)
1 x Mini AV IN - Composite Video/CVBS and L/R Audio
shared for Composite Video and Component/YPbPr,
1 x VGA/PC, 1 x 3.5mm jack for PC audio input
31/45/70W (home mode/standard/max)
(<0.5W in Standby)
728W x 461H x 168D
*Satellite input is for the LC-32CFG6242K model only. **Built-in Harman Kardon speaker systems (Full-range speaker and tweeter).
36
TECHNICAL SPECIFICATION
Product  che
General Information
Trademark
Model ID LC-32CHG6241K, LC-32CHG6242K
Energy e ciency class A+
Visible screen size (diagonal) 81 cm / 32 inches
On-mode power consumption 31.0 W
Annual energy consumption *1 45 kWh
Standby power consumption *2 <0.50 W
O mode power consumption
Screen resolution 1366 (H) x 768 (V)
*1: Energy consumption XYZ kWh per year, based on the power consumption of the television operating 4 hours per day for 365 days. The actual energy consumption will depend on how the television is used. *2: When the TV is turned o with the remote control/standby button and no function is active.
Sharp
n/a
Additional technical information
RF 75 ohm Antenna / Analog / DVB / Satellite*
Inputs 3 x HDMI, 2 x USB, 1 x SCART, 1 x Mini Component/YPbPr,
Sound Outputs 1 x Digital Optical Audio output, 1 x 3.5mm Headphone
Speaker* / Ampli er Watts (RMS) 2 x 10 / 2 x 8
Voltage and power consumption AC 220V ~ 240V; 50/60Hz
Dimensions including stand (mm)
Net weight (Kgs) 4.8
Wall Mounting VESA 400 x 200 (mm)
1 x Mini AV IN - Composite Video/CVBS and L/R Audio
shared for Composite Video and Component/YPbPr,
1 x VGA/PC, 1 x 3.5mm jack for PC audio input
31/45/70W (home mode/standard/max)
(<0.5W in Standby)
728W x 461H x 168D
*Satellite input is for the LC-32CHG6242K model only. **Built-in Harman Kardon speaker systems (Full-range speaker and tweeter).
3737
General Information
TECHNICAL SPECIFICATION
Product  che
Trademark
Model ID LC-40CFG6241K, LC-40CFG6242K
Energy e ciency class A+
Visible screen size (diagonal) 100 cm / 40 inches
On-mode power consumption 45.0 W
Annual energy consumption *1 66 kWh
Standby power consumption *2 <0.50 W
O mode power consumption n/a
Screen resolution 1920 (H) x 1080 (V)
*1: Energy consumption XYZ kWh per year, based on the power consumption of the television operating 4 hours per day for 365 days. The actual energy consumption will depend on how the television is used. *2: When the TV is turned o with the remote control/standby button and no function is active.
Sharp
Additional technical information
RF 75 ohm Antenna / Analog / DVB / Satellite*
Inputs 3 x HDMI, 2 x USB, 1 x SCART, 1 x Mini Component/YPbPr,
Sound Outputs 1 x Digital Optical Audio output, 1 x 3.5mm Headphone
Speaker** / Ampli er Watts (RMS) 2 x 10 / 2 x 8
Voltage and power consumption AC 220V ~ 240V; 50/60Hz
Dimensions including stand (mm)
Net weight (Kgs) 7.8
Wall Mounting VESA 400 x 200 (mm)
1 x Mini AV IN - Composite Video/CVBS and L/R Audio
shared for Composite Video and Component/YPbPr,
1 x VGA/PC, 1 x 3.5mm jack for PC audio input
45/65/80W (home mode/standard/max)
(<0.5W in Standby)
917W x 569H x 185D
*Satellite input is for the LC-40CFG6242K model only. **Built-in Harman Kardon speaker systems (Full-range speaker and tweeter).
38
TECHNICAL SPECIFICATION
Product  che
General Information
Trademark
Model ID LC-43CFG6241K, LC-43CFG6242K
Energy e ciency class A+
Visible screen size (diagonal) 109 cm / 43 inches
On-mode power consumption 50.0 W
Annual energy consumption *1 73 kWh
Standby power consumption *2 <0.50 W
O mode power consumption n/a
Screen resolution 1920 (H) x 1080 (V)
*1: Energy consumption XYZ kWh per year, based on the power consumption of the television operating 4 hours per day for 365 days. The actual energy consumption will depend on how the television is used. *2: When the TV is turned o with the remote control/standby button and no function is active.
Sharp
Additional technical information
RF 75 ohm Antenna / Analog / DVB / Satellite*
Inputs 3 x HDMI, 2 x USB, 1 x SCART, 1 x Mini Component/YPbPr,
Sound Outputs 1 x Digital Optical Audio output, 1 x 3.5mm Headphone
Speaker** / Ampli er Watts (RMS) 2 x 10 / 2 x 8
Voltage and power consumption AC 220V ~ 240V; 50/60Hz
Dimensions including stand (mm)
Net weight (Kgs) 8
Wall Mounting VESA 400 x 200 (mm)
1 x Mini AV IN - Composite Video/CVBS and L/R Audio
shared for Composite Video and Component/YPbPr,
1 x VGA/PC, 1 x 3.5mm jack for PC audio input
50/60/75W (home mode/standard/max)
(<0.5W in Standby)
966W x 595H x 202D
*Satellite input is for the LC-43CFG6242K model only. **Built-in Harman Kardon speaker systems (Full-range speaker and tweeter).
3939
General Information
TECHNICAL SPECIFICATION
Product  che
Trademark
Model ID LC-49CFG6241K, LC-49CFG6242K
Energy e ciency class A+
Visible screen size (diagonal) 123 cm / 49 inches
On-mode power consumption 67.0 W
Annual energy consumption *1 98 kWh
Standby power consumption *2 <0.50 W
O mode power consumption n/a
Screen resolution 1920 (H) x 1080 (V)
*1: Energy consumption XYZ kWh per year, based on the power consumption of the television operating 4 hours per day for 365 days. The actual energy consumption will depend on how the television is used. *2: When the TV is turned o with the remote control/standby button and no function is active.
Sharp
Additional technical information
RF 75 ohm Antenna / Analog / DVB / Satellite*
Inputs 3 x HDMI, 2 x USB, 1 x SCART, 1 x SD Card IN,
Sound Outputs 1 x Digital Optical Audio output, 1 x 3.5mm Headphone
Speaker* / Ampli er Watts (RMS) 2 x 10 / 2 x 8
Voltage and power consumption AC 220V ~ 240V; 50/60Hz
Dimensions including stand (mm)
Net weight (Kgs) 11.6
Wall Mounting VESA 600 x 300 (mm)
1 x Mini Component/YPbPr IN, 1 x Mini AV IN - Composite
Video/CVBS and L/R Audio shared for Composite Video
and Component/YPbPr
67/95/110W (home mode/standard/max)
(<0.5W in Standby)
1099W x 668H x 232D
*Satellite input is for the LC-49CFG6242K model only. **Built-in Harman Kardon speaker systems (Full-range speaker and tweeter).
40
TECHNICAL SPECIFICATION
Product  che
General Information
Trademark
Model ID LC-55CFG6241K, LC-55CFG6242K
Energy e ciency class A+
Visible screen size (diagonal) 139 cm / 55 inches
On-mode power consumption 85.0 W
Annual energy consumption *1 124 kWh
Standby power consumption *2 <0.50 W
O mode power consumption n/a
Screen resolution 1920 (H) x 1080 (V)
*1: Energy consumption XYZ kWh per year, based on the power consumption of the television operating 4 hours per day for 365 days. The actual energy consumption will depend on how the television is used. *2: When the TV is turned o with the remote control/standby button and no function is active.
Sharp
Additional Technical Information
RF 75 ohm Antenna / Analog / DVB / Satellite*
Inputs 3 x HDMI, 2 x USB, 1 x SCART, 1 x SD Card IN,
Sound Outputs 1 x Digital Optical Audio output, 1 x 3.5mm Headphone
Speaker* / Ampli er Watts (RMS) 2 x 10 / 2 x 8
Voltage and power consumption AC 220V ~ 240V; 50/60Hz
Dimensions including stand (mm)
Net weight (Kgs) 14.1
Wall Mounting VESA 600 x 300 (mm)
*Satellite input is for the LC-55CFG6242Kmodel only. **Built-in Harman Kardon speaker systems (Full-range speaker and tweeter).
1 x Mini Component/YPbPr IN, 1 x Mini AV IN - Composite
Video/CVBS and L/R Audio shared for Composite Video
and Component/YPbPr
85/110/150W (home mode/standard/max)
(<0.5W in Standby)
1238W x 761H x 232D
4141
General Information
TECHNICAL SPECIFICATION
Compatible fi les in USB Mode
Media Codec Resolution Bit Rate File Extension
MPEG1/2 1080P@60fps 40Mbps
MPEG4 1080P@60fps 40Mbps .MPG, .MPEG, .mp4, .mov, .3gpp, .3gp, .avi, .mkv, .asf
XviD 1080P@60fps 40Mbps .mp4, .mov, .avi, .mkv, .asf
Sorenson H.263 1080P@60fps 40Mbps
H.263 1080P@60fps 40Mbps .3gpp, .3gp
Film
Media Codec Frequency Bit Rate File Extension
Music
Media File Type Resolution File Extension
Photo
Internal Subtitle
External Subtitle
H.264 1080P@60fps 80Mbps
HEVC/H.265 2048x1088@60fps 30Mbps .mp4, .mkv
AVS 1080P@60fps 40Mbps .ts, .trp, .tp
AVS+ 1080P@60fps 50Mbps .ts, .trp, .tp
VC1 1080P@60fps 40Mbps .wmv
Motion JPEG 640x480@30fps 10Mbps .mov, .avi, .mkv
VP8 1080P@30fps 20Mbps .mkv, .webm
VP9 2048x1088@60fps 30Mbps .mkv, .webm
MPEG1/2 Layer1, 2, 3
AC3
EAC3
HEAAC 8KHz ~ 48KHz
DTS
VORBIS Up to 48KHz
LPCM 8KHz ~ 48KHz 64Kbps ~ 1.5Mbps
LBR(cook)
FLAC 8KHz ~ 96KHz < 1.6Mbps
DRA 8KHz ~ 48KHz < 512Kbps .ts, .trp
JPEG
PNG
BMP 9600x6400 .bmp
GIF 6400x4800 (800x8 x 600x8) .gif
File Extension Co ntainer Subtitle Codec
mp4 MP4 DVD Subtitle, UTF-8 Plain Text
mkv MKV ASS, SSA, UTF-8 Plain Text, VobSub, DVD Subtitle
avi AVI(1.0, 2.0) XSUB, XSUB+
File Extension Subtitle Parser Remark
.srt SubRip
.ssa/ .ass SubStation Alpha
.smi SAMI
.sub
.txt TMPlayer
16KHz ~ 48KHz
32KHz, 44.1KHz, 48KHz
32KHz, 44.1KHz, 48KHz
Up to 48KHz
8KHz, 11.025KHz, 22.05KHz,
44.1KHz
15360x8640, (1920x8 x 1080x8) Base-line
1024x768 Progressive
9600x6400 Non-interlace
1200x800 Interlace
SubViewer, MicroDVD, DVDSubtitleSystem, SubIdx(VobSub)
Layer1 32Kbps ~ 448Kbps Layer2 8Kbps ~ 384Kbps Layer3 8Kbps ~ 320Kbps
32Kbps ~ 640Kbps
32Kbps ~ 640Mbps
< 1.5Mbps
64Kbps ~ 128Kbps .rm, .rmvb
.DAT, .VOB, .MPG, .MPEG,.ts, .trp, .tp, .mp4, .mov, .3gpp, .3gp, .avi, .mkv, .asf
.avi, .asf, .mkv, .ts, .trp, .tp, .DAT, .VOB, .MPG,
.swf, .m4a)
.ac3, .avi, .mkv, .3gpp, .3gp, .mp4, .mov, m4a, .ts, .trp, .tp, .DAT, .VOB, .MPG, .MPEG
.ec3, .3gpp, .3gp, .mp4, .mov, m4a, .ts, .trp, .tp, .DAT, .VOB, .MPG, .MPEG
.aac, .avi, .mkv, .3gpp, .3gp, .mp4, .mov, m4a, .ts,
.mkv, .VOB
.mkv, .webm, .3gpp, .3gp, .mp4, .mov, m4a, .ogg
.avi, .mkv, .3gpp, .3pg, .mp4, .mov, .ts, .trp, .tp, .DAT, .VOB, .MPG, .MPEG, .wav, .m4a
.jpg/.jpeg
.png
SubViewer 1.0 & 2.0 Only
42
UMC Poland sp. z o.o.
Ostaszewo 57B, 87-148 Łysomice, Poland
Assembled in Europe
www.sharp.eu
SHA/MAN/0170
Loading...