Sharp LC-32CHE5111E, LC-32CFE5111E, LC-32CHE5112E, LC-32CFE5100E, LC-32CFE5112E User Manual
...Page 1
User manual
models:
LC-32CHE5100E
LC-32CHE5111E
LC-32CHE5112E
LC-32CFE5100E
LC-32CFE5111E
LC-32CFE5112E
LC-40CFE5100E
LC-40CFE5111E
LC-40CFE5112E
LC-43CFE5100E
LC-43CFE5111E
LC-43CFE5112E
LC-49CFE5001E
LC-49CFE5002E
LC-50CFE5101E
LC-50CFE5102E
LC-50CFE5111E
LC-50CFE5112E
Page 2
DVD M ENU
DVD S ETUP
GOT O
A-B
ME NU
SO UR CE
EX IT
OK
VOL
CH
FAV
DT V
US B
DV D
7
8
9
S.MODE
0
1
2
3
4
5
6
SLE EP
AUD IO
TEX T
ANG LE
REP EAT
DIS PLAY
REC L IST
ASP ECT
SUB TITLE
TV
GU IDE
P.MODE
RA DI O
IN FO
TEX T
HOL D
TEX T/DVD
ZOO M
PVR / DVD
2
6
7
14
11
12
9
17
15
19
23
27
32
35
4 5
29
1
3
10
13
8
16
18
21 22
25 26
20
24
28
30 31
33 34
36
Page 3
Page 4
EN
b
Important safety instructions
CAUTION
RISK OF ELECTRIC SHOCK
DO NOT OPEN
Please, read these safety instructions and respect
the following warnings before the appliance is
operated:
In order to prevent re
spread, always keep candles
and other open ames away
from this product.
• TV with the weight of more than 20 kg must be lifted and carried by at
least two people.
• Be careful! This TV does not contain any parts which could be repaired
by the user. In case of afault, contact the producer or the authorized
service. The contact with certain parts inside the appliance might
endanger your life. The guarantee is not provided for the faults caused
by non-professional interactions!
• Do not remove the rear part of the appliance.
• This appliance is designed for receiving and reproduction of video and
sound signals. Any other use is strictly forbidden.
• Do not expose the apparatus to dripping or splashing liquid.
• If the supply cord is damaged, it must be replaced by the manufacturer,
its service agent or similarly qualied persons in order to avoid a hazard.
• The ideal distance to watch TV is approximately ve times longer of the
diagonal of the screen The light striking upon the screen from other light
sources can cause reections and make the quality of the picture worse.
• Please, ensure the sucient ventilation and appropriate distance of the
appliance from other pieces of furniture.
• Install the product at least 5 cm from the wall for ventilation.
• Ensure that the ventilation is not impeded by covering the ventilation
openings with items such as newspapers, table-cloths, curtains, etc.
• The TV set is designed to be used in moderate climate.
• The TV set is designed exclusively for the operation in adry place. When
using the appliance outside, please, make sure it is protected against
moisture (rain, splashing water). Never expose the appliance to moisture.
• Do not place any containers with water on the appliance, such as vases,
etc. These containers might get pushed over, which would endanger
electric safety. Place the appliance exclusively on at and stable surfaces.
Do not place any objects such as newspaper or blankets, etc. on or under
the appliance.
• Make sure the appliance does not stand on any power cables as they
might get damaged. Mobile phones and other devices such as WLAN
adapters, monitoring cameras with wireless signal transmission, etc.
might cause electromagnetic interference and they should not be
placed near the appliance.
• Do not place the appliance near heating elements or in aplace with
direct sunshine as it has anegative eect on cooling of the appliance.
Heat storage is dangerous and it can seriously reduce the lifetime of
the appliance. In order to ensure the safety, ask the qualied person to
remove the dirt from the appliance.
• Try to prevent the mains cable or (if it is part of delivery) mains adapter
damage. The appliance can only be connected with asupplied mains
cable/adapter.
• Storms are dangerous for all electric appliances. If the mains or aerial wir-
ing is struck by the lightening, the appliance might get damaged, even if
it is turned o. Thus you should disconnect all the cables and connectors
of the appliance before the storm.
• To clean the screen of the appliance use only adamp and soft cloth. Use
only clean water, never detergents or in no case dissolvents.
• Position the TV close to the wall to avoid the possibility of it falling when
pushed.
The instructions shown below are asafer way to set up the TV, by fixing
it to the wall, avoiding the possibility of it falling forwards if pulled. This
will prevent the TV from falling forward and causing injury. This will also
prevent the TV from damage.
This method is used if the TV is placed on aglass surface or you do not
wish to screw anything into your furniture.
Ensure that children do not climb or hang onto the TV.
For this type of installation you will need afastening cord
A) Using one/both of the top wall-mounting holes and screws (the
screws are already supplied in the wall mounting holes) fasten one end
of the fastening chord/sto the TV.
B) Secure the other end of the fastening chord/sto your wall.
• To use this model TV as aPC/laptop monitor it will need to be connected
via the VGA input, it cannot be used as aPC/laptop monitor via the HDMI
input. The HDMI Input is provided to view digital content with compatible external devices.
• The software on your TV and the OSD layout can be changed without
notice.
Warning:
• Never connect any external devices to alive appliance. Switch o not
only the TV but also the devices which are being connected! Plug the
appliance plug into the wall outlet after connecting the external devices
and the aerial!
• Always make sure there is free access to the appliance mains plug.
• The appliance is not designed for ause in aworkplace tted with
monitors.
• The systematic use of headphones at high volume might lead to irrevers-
ible hearing damage.
• Ensure environmental disposal of this appliance and any components
including batteries. When in doubt, please, contact your local authority
for details of recycling.
• While installing the appliance, do not forget that furniture surfaces are
treated with various varnishes, plastics, etc. or they might be polished.
The additions contained in these products might cause destruction of
base material of appliance stand. This will result in the holdovers of this
material stuck to the furniture surface, which are dicult to remove, if
not even impossible.
• The screen of your TV responds to the top quality requirements and it
was checked in details for accidental faulty pixels several times. Due to
the technological properties of the manufacturing process, it is not possible to eliminate the existence of asmall number of faulty points on the
screen for 100% (even with maximum care while production provided).
These faulty pixels are not considered faults in terms of guarantee
conditions, if their extent is not greater than the boundaries dened by
DIN norm.
Page 5
5
Important information regarding use of video
games, computers, captions and other xed image
displays.
• The extended use of xed image program material can cause aper-
manent “shadow image “ on LCD screen (this is sometimes incorrectly
referred to as “burnout to the screen“). This shadow image is then
permanently visible on the screen in the background. It is apartly
irreversible damage. You can avoid such adamage by respecting the
following instructions:
• Reduce the brightness/contrast setting to aminimum viewing level.
• Do not display the xed image for along period of time. Avoid display-
ing of:
» Teletext time and charts,
» TV/DVD menu, e.g. DVD contents,
» In the „Pause“ mode (hold): Do not use this mode for along time,
e.g. while watching aDVD or avideo.
» Turn o the appliance if you are not using it.
Batteries
• Observe the correct polarity when inserting the batteries.
• Do not expose batteries to high temperatures and
do not place them on locations where the temperature might increase quickly, e.g. near the re or on
the direct sunshine.
• Do not expose batteries to excessive radiant heat,
do not throw them into the re, do not disassemble
them and do not try to recharge unrecoverable batteries. They could leak out or explode.
» Never use dierent batteries together or mix
new and old ones.
» Dispose of batteries in an environmentally friendly way.
» Most of the EU countries regulate the disposal of batteries by law.
Disposal
• Do not dispose of this appliance as unsorted municipal
waste. Return it to adesignated collection point for the
recycling of WEEE. By doing so, you will help to converse
resources and protect the environment. Contact your
retailer or local authorities for more information.
b
Trademarks
• HDMI, the HDMI logo and High-Denition Multimedia Interface are
trademarks or registered trademarks of HDMI Licensing LLC.
• The “HD TV” Logo is a trademark of DIGITALEUROPE.
• The “HD TV 1080p” Logo is a trademark of DIGITALEUROPE.
• The DVB logo is the registered trademark of the Digital Video Broadcasting - DVB - project.
• Manufactured under license from Dolby Laboratories.
• Dolby and the double-D symbol are trademarks of Dolby Laboratories.
Cd
Page 6
EN
b
What is included in the box
Supply of this TV includes following parts:
• 1x TV • 1x Stand
• 1x Remote control • 1x Stand neck
• 2x AAA batteries • 1x RF cable
• 1x User guide • 1x TV stand installation packet
• SCART adapter cable*
* - supplied only for models without SCART connector
b
Attaching the Stand
Please follow the instructions on last page of this user manual.
b
Getting started - initial set up
1. Using the RF cable supplied, connect the TV to the TV Aerial wall
socket. Connect the power cable to the Electrical outlet.
2. Insert the batteries supplied into the Remote control.
3. Press and hold GREEN and YELLOW buttons together for more than
3 seconds to pair remote control with your TV. Then press Standby
button to power on TV.
4. You will be now welcomed with the First Time Installation screen.
If it does not appear, on the remote control, please press [MENU] then
8-8-8-8 and the menu will appear.
If you wish to make changes to any of the default settings, use the
scroll ▲/▼/◄/► buttons. To exit this menu at anytime, press [EXIT]
button.
5. Please set desired settings in FIRST TIME INSTALLATION screen.
DVB Antenna - Select the type of digital broadcasting.
You can choose between Terrestrial (DVB-T) or Cable (DVB-C).
Language - Set the TV Menu language.
Country - Set the desired country.
Tunning Mode - Choose if you want to tune only Digital (DTV)
Analogue (ATV) or both Digital and Analogue (DTV + ATV)
Operator - Select Cable provider. If your cable operator is not listed
select Others. (Avaliable only if DVB Antenna is set to CABLE)
Environment - Select the location of TV.
For home use, please select Home Mode.
For shop demonstration mode, set Store Mode.
LCN - Set LCN to ON if you want to arrange channels by provider
preferences (only applies to DVB-T and DVB-C channels).
6. Press [Auto Tuning] button to start the tuning process.
7. Optional channel presets DVB-C:
Keep all default settings as recommended.
If DVB-C channels are not found, contact your network provider for the
valid "Network ID". Then perform anew search. Press the [MENU], select
"Network ID" and enter the network ID.
8. Optional channel presets DVB-S2*: Select "Satellite" in the "Digitaltype" in the menu for the optional channel presets. Here you can
choose between the various satellites. Since selection completed, then
the channel list of the exact satellite will be available to be imported
into your TV system. This take several seconds.
Conrm with [OK] button on the remote control, to start scanning.
TIP: If you are missing channels, the reason for this is likely to be signal
strength, you should consider connecting signal booster and re-tuning the TV.
TIP: As part of our continuing eorts to reduce energy consumption, we added
anew Home Mode feature (appears on the rst installation screen). This
function helps reduce energy consumption up 15% compared to other modes.
The image brightness is reduced using Home Mode. If this setting does not suit
your environment, you can choose from other modes (Note: the Store mode is
the optimal default mode, but consumes 15% more than the Home Mode).
* - Available only for TVs with DVB-S tuner
b
Remote control
Radio controlled remote control - No more aiming in the TV direction!
Refer to remote control picture on the second page of this user
manual.
1.
STANDBY – Switch on TV when in standby or vice versa.
2.
MUTE – Mute the sound or vice versa.
3. DTV – Switch to digital TV source.
4. RADIO – Switch to Digital and switch between TV and radio in Digital
mode.
5. USB – Switch to USB source.
6. DVD – no function
7. 0 – 9 – to select aTV channel directly.
8. TV GUIDE – Opens the 7 Day TV Guide (Digital mode).
9.
– To return to the previous channel viewed.
10. VOL ▲/▼ – To increase / decrease the sound level.
11. S.MODE – Scrolls through sound mode options.
12. P.MODE – Scrolls through picture mode options.
13. FAV – To display favourites menu.
14. CH ▲/▼ – To increase or decrease the channel being watched.
15. (▲/▼/◄/►/ OK) – Allows you to navigate the on-screen menus and
adjust the system settings to your preference.
16. MENU – To display OSD menu.
17. EXIT – To exit all menus.
18. SOURCE – To display the input/source menu.
19. INFO – Press once for now/next channel information. Press twice for
programme information about current programme.
20. ASPECT – To switch the screen between the dierent picture formats.
21. SLEEP – Press repeatedly to cycle through the sleep options.
22. AUDIO – To change the audio language (if available).
23. SUBTITLE – To switch the dialogue at the bottom of the screen (on/
o).
24. TEXT – Teletext mode - To enter Teletext
25. TEXT HOLD – Teletext mode - Hold current page which is displayed
26. ZOOM – To zoom in
27.
DISPLAY – To switch o the screen when listening to radio
28. Rec
1
– PVR Record
29. Rec List
1
– Opens the list of recordings.
30.
– To restart the current chapter
31.
– To advance forward to the next chapter
32.
/
– To stop the playback / To EJECT the disc press/hold the button
for 4 seconds.
33.
– To play in fast rewind mode.
34.
– To play in fast forward mode.
35.
– To play/pause
36. COLOUR BUTTONS
– Additional teletext and OSD functions
1
- available only with PVR function
Page 7
7
*
b
TV buttons & Source menu
Vol+ Volume up and menu right
Vol- Volume down and menu left
CH+ Programme/Channel up and menu up
CH- Programme/Channel down and menu down
MENU Displays Menu/OSD
SOURCE Displays the input source menu
STANDBY Standby Power On/O
b
Choosing Mode Input/Source
To switch between the dierent input/connections.
a) Using the buttons on the remote control:
1. Press [SOURCE/ AV] - The source menu will appear.
2. Press [▼] or [▲] to select the input you require.
3. Press [OK].
b) Using the buttons on the Television:
1. Press [SOURCE].
2. Scroll up / down using CH+/ CH- buttons to the input/source you
require.
3. Press Vol+ to change input/source to the one selected.
b
Connections
Please see the table for connector types for
dierent models available on the page 12.
USB
USB-Input 1, 2*
HDMI 1, 2, 3* in
HDMI-Input 1, 2, 3*
VGA(PC)
VGA PC-Input
VGA (PC) Audio In
3.5mm PC audio input
L
R
W R
R/L - Video & YPbPr audio In *
Component / Video audio input
Y
Video (CVBS) *
VIDEO input
Mini AV*
Video Input & Component / Video audio input
Mini YPbPr
Mini Component HD Input
SCART *
SCART-Input
CI Card IN
SCART input
RF In
RF / TV Aerial Input
Sat In *
Satellite Input
Digital Optical Audio Out *
Digital optical output
RJ 45
Ethernet
Digital COAX Audio Out *
Digital Coax output
HEADPHONES
3.5mm Headphone output
* - Only on supported devices
b
TV Menu navigation
To access this menu, press [MENU] button on the remote control. To enter
amenu press [OK]. If you wish to make changes to any of the default
settings, use the scroll (▲/▼/◄/►) buttons. To conrm any settings press
[OK] button. To exit this menu at anytime, press [EXIT] button.
b
Picture
Picture Mode - Choose from the following presets.
ū Standard - Default settings
ū Dynamic - Recommended settings for fast moving pictures
ū Mild - Set to be lighter in colour and less bright
ū Personal - Lets you manually alter all the settings
ū Economy - Consume 15% less energy.
Contrast - Switch the balance between black and white.
Brightness - Increase or decrease the brightness of the picture.
Tint - Lets you increase or decrease the level of tint
within the picture (for NTSC signal only)
Colour - Increases the colour from black and white.
Sharpness - Increase or decrease the sharpness of the picture.
Colour Temperature - Choose from the following presets.
ū Normal - Default settings
ū Warm - Increases red within the picture
ū Cold - Increases blue within the picture
Aspect Ratio - Picture format varies depending on the channel/broadcast.
There are a number of dierent options to best meet your needs.
ū Auto-Automatically displays the best picture format.
So the picture is in the correct position. May have
black lines at the top/bottom and/or sides.
ū 4:3 - Displays the 4:3 picture in its original size. Side
bars are shown to ll the 16:9 screen.
ū 16:9 - Fills the screen with a regular 16:9 signal.
ū Zoom 1/2 - The picture is the correct proportion
but zoomed in to ll the screen.
ū Dot by Dot (HDMI) - Will display the picture in its
original resolution without any change.
ū Full Screen - Stretch signal to ll the screen.
Noise Reduction - Switch noise reduction on/o.
b
Sound
Sound Mode - Choose from the following presets
ū Standard - Default settings
ū Music - Emphasises music over voices
ū Movie - Provides live and full sound for movies
ū Personal - Selects your personal sound settings
ū Sports - Emphasises sound for sports
Tip: Treble and bass levels can only be adjusted when the sound mode
‘Personal’ is selected.
Treble - To adjust the level of high frequency within the sound.
Bass -To adjust the level of low frequency within the sound.
Balance - To switch the sound between the left and right speakers.
Page 8
EN
Auto Volume Level (AVL) - When ‘on’ is selected, the volume
will stay at aconstant level regardless of input/source.
Surround Sound - Allows you to turn surround sound eect ON or OFF.
Digital Output - This is the digital COAX Audio
output. Choose from the following options:
ū O - O
ū Auto - Selects the best settings automatically
ū PCM- Select this option if you are connecting to aStereo
Hi- via coax cable (Pulse-code modulation (PCM) is
adigital representation of an analogue signal)
Audio Description - Additional sound track for visually impaired.
Available only on selected DTV shows.
AD Volume - to adjust volume of Audio Description sound track
Audio Delay (ms) - Enables the user to adjust sound
setting to sync picture and audio for TV speakers.
SPDIF Delay (ms) - Enables the user to adjust sound setting to sync picture
and audio for external speakers connected via digital audio output.
b
PC
Auto Adjust - Lets you automatically congure the
television to be used as acomputer monitor.
H Oset - Changes the horizontal position of the picture.
VOset - Changes the vertical position of the picture.
Size - increase picture size.
Phase - To adjust delay time of phase in order to reduce the noise of picture
Position Reset - Changes back to the original settings
Tip: If the computer is left in-active for aperiod of time, the
television will switch into a‘sleep’ state (the screen will power o
to save power). To switch back on press the standby button.
Tip: If you do not press any buttons for 10 seconds, the menu
will automatically exit. You can change the length of time before
the menu exits automatically - see ‘OSD Timer’ section.
b
Channel
DVB Antenna* - Set the type of DTV signal
– Terrestrial - Terrestrial (DVB-T)
– Cable - Cable (DVB-C)
Auto Tuning - Allows you to retune the television for all digital
channels, digital radio stations and analogue channels.
Analogue Manual Tuning - Allows you to
manually tune your analogue signal.
Digital Manual Tuning - Allows you to manually tune your digital signal.
Channel Edit - Allows you to delete, skip and add favourite channels.
Signal Information - Information about DVB signal.
CI Information - Pay per view services require a“smartcard” to be
inserted into the TV. If you subscribe to apay per view service the
provider will issue you with a‘CAM’ and a“smartcard”. The CAM can
then be inserted into the COMMON INTERFACE PORT (CI Card In).
Recorded list - List of recorded TV shows.
Schedule List - Lists your programme reminders.
Dish Setup** - This menu is only available in DVB-S2 mode. You can
select the type of satellite, your transponder and your LNB type, etc.
* - Only for models with DVB-T2 tuner
** - Only for models with DVB-Stuner
b
Lock
System Lock - Allows you to lock or unlock the menu. You will be
asked to enter a4 digit password. Use the ◄ button to quit the
password input. Use the ► button to clear. Default password is 0000.
Set Password - Change the default password.
Channel lock - Lock specic TV channels.
Parental Guidance - Lock TV channels based on age restriction.
Key Lock - Lock the TV buttons.
– O - All TV buttons are unlocked
– Partial - Only Standby button is unlocked
– Full - All TV buttons are locked
b
Time
Clock - Set the date and time. Date and time is
set up automatically in DVB mode.
O Time - Allows you to set aspecic time for your TV to turn o.
On Time - Allows you to set aspecic time for your TV to turn on, the
channel it will then display, the source it will be on and also the volume.
This function can then be toggled to repeat every day or acertain day.
Sleep Timer - Lets you set the sleep timer so the television automatically
switches o after aset amount of time. O -> 10min -> 20min ->
30min -> 60min -> 90min -> 120min -> 180min -> 240min.
OSD Timer - Lets you adjust the amount of time the On
Screen Menu stays on the screen before disappearing.
Auto standby - Adjustment for the auto standby in
hourly increments: O -> 3h -> 4h -> 5h.
Time Zone - Change your current time zone.
b
Network*
IP cong - LAN network connection settings
ū Auto - Will automatically connect the TV to your home network
(this is the default setting and is highly recommended)
ū Manual - Allows you to manually change the IP,
Netmask, Gateway and DNS information.
Network info - Information about network settings
Network test - Network connection test
* - The LAN/Ethernet port is used only for DVB-T2 services. It is not
intended to be used for internet/network use.
b
Settings
Language - Allows you to change the language of the menu.
Audio Languages - Allows you to change audio
language on selected DVB channels.
TT Language - Encoding settings for the proper
display of teletext characters.
Subtitle Language - Allows you to change subtitles
language on selected DVB channels.
Hearing Impaired - If signal provides support for the hearing
impaired, the subtitles can be played by pressing the “Subtitle”. If
you set Hearing Impaired ON and switch to achannel with supports
for hearing impaired subtitles will be activated automatically.
Blue Screen - Changes the background when there is no input between
transparent and ablue background (Only available on some sources).
PVR File System - PVR Recording options
ū Select disk - Select USB port and disk partition
ū TimeShift Size - Set size time of shift buer.
ū Format Start - You can format connected USB
storage device to FAT 32 le system.
WARNING: ALL DATA ON THE USB DEVICE WILL BE DELETED
ū Speed check - Tests write speed of connected USB storage devices.
First Time Installation - Starts the rst time installation.
Software Update (USB) - From time to time we may release new
rmware to improve the operation of the television (available
Page 9
9
to download). This menu lets you install the new software/
rmware onto the television. Further details of how to do this
will be issued with the rmware. Contact the helpline or refer
to the ‘www.umc-slovakia.sk/products-support/’ website.
Reset TV - This resets the menus to factory settings.
HDMI CEC* - Allows you to operate devices
connected via HDMI with TV remote control.
ū Auto standby* - Automatically turn on/
o connected devices via HDMI CEC
ū Device list* - Allows you to access devices menu and
operate the menu using TV remote control.
ū HDMI ARC* - Sends audio signal from terrestrial/satellite broadcast
via HDMI to the AV receiver without using any additional audio
cables, this functions is available only on HDMI 2 output.
* - HDMI CEC must be supported by connected device.
LED Status - Allows the user to switch the LED Power indicator light ON
or OFF, when the TV is being operated. (When this option is set to OFF
the LED Power indicator light will flash when the remote control is used)
Version Info - shows version of TV software
Store Mode* - switch ON/OFF shop demonstration mode
* - available only if store mode was selected during rst time installation
b
7 Day TV Guide
TV Guide is available in Digital TV mode. It provides information about
forthcoming programmes (where supported by the Digital channel). You
can view the start and end time of all programmes and on all channels for
the next 7 days and set reminders.
1. Press [TV GUIDE]. The following 7 Day TV Guide will appear.
2. Navigate through the menu using ▲/▼/◄/►.
You can now:
Record selected TV channel and TV show by pressing the RED button.*
only for models with recording function
Set areminder by pressing GREEN.
View aprevious day by pressing YELLOW.
View the next day by pressing BLUE. [INFO] shows detailed information
about the selected post
3. Press [EXIT] to exit the 7 day TV Guide.
b
USB mode / Media player
USB mode oers playback of various dierent types of content that you
have saved on your USB Memory Stick. On switching to USB source the
USB mode menu screen will appear. The content will be divided into Photo,
Music, Movie and Text based on le type.
1. You can navigate through the menus using the scroll ▲/▼/◄/►but-
tons. To conrm the item you wish to play/view press [OK] button.
2. Select the drive you require. (If your drive only has 1 partition you will
only see 1 item).
3. You can now access the item. Press OK to view.
4. While viewing you may control the item playback modes by using the
remote control buttons or by invoking playback navigation menu and
selecting on-screen buttons ▲/▼/◄/► and [OK]
NOTE: USB extension cables are not recommended as
they can cause a reduction in picture/audio quality and
stoppages during play back of USB content.
b
USB Record - Digital mode*
Built into this television is aUSB record facility. This function is available in
Digital mode when used in conjunction with acompatible USB memory
stick or USB Hard drive. The benets of this are as follows:
• Pause live TV and then playback, fast forward and rewind (up to live TV).
• One button record, if you decide you want to record the current
programme.
• Easy programmable recording from the 7 day TV Guide
• Record TV and watch back on your computer/laptop.
Due to the nature of the product, it is necessary to use ahigh speed USB
memory stick (as the TV reads from and writes to the memory stick at the
same time, some memory sticks may not be suitable).
Minimum Specication - USB Memory Stick
ū Read Speed - 20 MB/s(Mega Byte Per Second)
ū Write Speed - 6 MB/s(Mega Byte Per Second)
Pause Live TV (Time Shift) *
Pausing Live TV is very simple.
ū Press the play/pause button and the television will pause and the live
content will be recorded. To resume watching press play/pause again.
ū Press fast forward to go forward in arecording (i.e. to skip adverts).
ū Press fast rewind to go back in arecording
(i.e. if you fast forwarded too far).
TIP: When you switch the TV to standby or change channel the Time Shift
memory is wiped. To restart time shift you must press play/pause button.
One Button Record
At any point in time you may decide to record the current channel that you
are watching. To do this you need to press the [REC] button.
TIP: This television contains one TV tuner, therefore it can
only record the channel you are watching or record one
channel while the television is in standby mode.
NOTE: USB record function is only available in Digital TV mode.
Due to copyright laws and illegal copying/recording it is not
possible to record to/from any other input/output source.
* - only for devices with built in PVR function
Page 10
EN
Media File Ext.
Codec
Remark
Video Audio
Movie
.mpg MPEG-1, MPEG-2
MP3, WMA, AAC, AC3
Max Resolution: 1920x1080
Max Data rate: 40 Mbps
.avi
Xvid, MJPEG, MPEG-4
SP/ASP, H.264
Max Resolution: 1920x1080
Max Data rate: 20 Mbps
.ts MPEG-2, H.264
".mov/
.mkv"
MPEG-4 SP/ASP, H.264
.dat MPEG-1
.mp4
MPEG-4 SP/ASP, H.264
MPEG-1, MPEG-2
Max Resolution: 720x576 Max
Data rate: 40 Mbps
.vob MPEG-2
Music
.mp3 - MP3
Sample Rate 8K-48KHz Bit rate: 32K 320Kbps Channel: Mono/Stereo
.wma - WMA
".m4a/
.aac"
- AAC
Sample Rate 16K-48KHz Bit rate: 32K
~ 442Kbps Channel: Mono/Stereo
Photo
".jpg/
.jpeg"
Progressive JPEG Max Resolution: 1024x768
Baseline JPEG Max Resolution: 8192x8192
.bmp BMP
Max Resolution: 6500x6500 Pixel
Depth 1/4/8/16/24/32 bpp
.png
Non-Interlaced Max Resolution: 3000x3000
Interlaced Max Resolution: 1500x1500
Compatible les in USB Mode
Product che
Supplier: SHARP
Model:
LC-32CHE5100E
LC-32CHE5111E
LC-32CHE5112E
LC-32CFE5100E
LC-32CFE5111E
LC-32CFE5112E
LC-40CFE5100E
LC-40CFE5111E
LC-40CFE5112E
LC-43CFE5100E
LC-43CFE5111E
LC-43CFE5112E
LC-49CFE5001E
LC-49CFE5002E
LC-50CFE5101E
LC-50CFE5102E
LC-50CFE5111E
LC-50CFE5112E
Energy Eciency class: A+ A+ A+ A+ TBD A+
Visible screen size (diagonal): 32" / 81cm 32" / 81cm 40" / 100cm 43" / 109cm 49" / 124cm 50" / 127cm
On mode average power
consumption:
31,0 W 31,0 W 45,0 W 41,0 W TBD 58,0 W
Annual energy consumption*: 45 kWh 45 kWh 66 kWh 60 kWh TBD 85 kWh
Standby power consumption**: <0,50 W <0,50 W <0,50 W <0,50 W <0,50 W <0,50 W
O mode power
consumption:
NOT APPLICABLE
Screen resolution: 1366 (H) x 768 (V) 1920 (H) x 1080 (V) 1920 (H) x 1080 (V) 1920 (H) x 1080 (V) 1920 (H) x 1080 (V) 1920 (H) x 1080 (V)
* - Energy consumption XYZ kWh per year, based on the power consumption of the television operating 4 hours per day for 365 days. The actual energy
consumption will depend on how the television is used.
* *- when the TV is turned o with the remote control and no function is active
Page 11
11
Page 12
Technical specication | Especicaciones técnicas | Caractéristiques techniques
Speciche tecniche | Technische Daten | Especicações técnicas
Specykacja techniczna | Technické údaje | Műszaki specikáció
Tekniske specikationer | Tehnična specikacija | Tehničke specikacije
Tехнические характеристики | Техническа спецификация
Specicaţii tehnice | Τεχνικά χαρακτηριστικά
Model
TUNER
HDMI Input
USB Input
RF Input - ( Analog /Digital)
Sat. Input
CI Card Input
SCART Input
VGA/PC Input
Composite/CVBS Video Input
Mini AV - Composite/CVBS Video In. + R/L
Audio in. for Composite/CVBS & Component/YPbPr
Mini Component/YPbPr Input
3.5mm Audio Input (for PC/VGA)
R/L Audio input for Composite/
CVBS & Component YPbPr
COAX Audio output
Optical Audio output
3.5 mm headphones output
RJ 45
LC-32CHE5100E T/C x3 x1 x1 - x1 - x1 x1 - x1 x1 x1 x1 - x1 -
LC-32CHE5111E T/C/T2 x3 x2 x1 - x1 x1 x1 - x1 x1 x1 - - x1 x1 x1
LC-32CHE5112E T/C/T2/S2 x3 x2 x1 x1 x1 x1 x1 - x1 x1 x1 - - x1 x1 x1
LC-32CFE5100E T/C x3 x1 x1 - x1 - x1 x1 - x1 x1 x1 x1 - x1 -
LC-32CFE5111E T/C/T2 x3 x2 x1 - x1 x1 x1 - x1 x1 x1 - - x1 x1 x1
LC-32CFE5112E T/C/T2/S2 x3 x2 x1 x1 x1 x1 x1 - x1 x1 x1 - - x1 x1 x1
LC-40CFE5100E T/C x3 x1 x1 - x1 - x1 x1 - x1 x1 x1 x1 - x1 -
LC-40CFE5111E T/C/T2 x3 x2 x1 - x1 x1 x1 - x1 x1 x1 - - x1 x1 x1
LC-40CFE5112E T/C/T2/S2 x3 x2 x1 x1 x1 x1 x1 - x1 x1 x1 - - x1 x1 x1
LC-43CFE5100E T/C x3 x1 x1 - x1 - x1 x1 - x1 x1 x1 x1 - x1 -
LC-43CFE5111E T/C/T2 x3 x2 x1 - x1 x1 x1 - x1 x1 x1 - - x1 x1 x1
LC-43CFE5112E T/C/T2/S2 x3 x2 x1 x1 x1 x1 x1 - x1 x1 x1 - - x1 x1 x1
LC-50CFE5101E T/C/T2 x3 x2 x1 - x1 - x1 - x1 x1 x1 - - x1 x1 x1
LC-50CFE5102E T/C/T2/S2 x3 x2 x1 x1 x1 - x1 - x1 x1 x1 - - x1 x1 x1
LC-50CFE5111E T/C/T2 x3 x2 x1 - x1 x1 x1 - x1 x1 x1 - - x1 x1 x1
LC-50CFE5112E T/C/T2/S2 x3 x2 x1 x1 x1 x1 x1 - x1 x1 x1 - - x1 x1 x1
LC-49CFE5001E T/C/T2 x3 x2 x1 - x1 x1 x1 - x1 x1 x1 - - x1 x1 x1
LC-49CFE5002E T/C/T2/S2 x3 x2 x1 x1 x1 x1 x1 - x1 x1 x1 - - x1 x1 x1
Loading...