Thank you for your purchase of the SHARP LCD colour TV product. To ensure safety and many years of trouble-free
operation of your product, please read the Important Safety Precautions carefully before using this product.
Important Safety Precautions
Electricity is used to perform many useful functions, but it can also cause personal injuries and property damage
if improperly handled. This product has been engineered and manufactured with the highest priority on safety.
However, improper use can result in electric shock and/or fire. In order to prevent potential danger, please
observe the following instructions when installing, operating and cleaning the product. To ensure your safety
and prolong the service life of your LCD colour TV product, please read the following precautions carefully
before using the product.
1. Read instructions—All operating instructions must be read and understood before the product is operated.
2. Keep this manual in a safe place—These safety and operating instructions must be kept in a safe place for future
reference.
3. Observe warnings—All warnings on the product and in the instructions must be observed closely.
4. Follow instructions—All operating instructions must be followed.
5. Attachments—Do not use attachments not recommended by the manufacturer. Use of inadequate attachments can
result in accidents.
6. Power source—This product must operate on a power source specified on the specification label. If you are not sure
of the type of power supply used in your home, consult your dealer or local power company.
7. AC cord protection—The AC cords must be routed properly to prevent people from stepping on them or objects
from resting on them. Check the cords at the plugs and product.
8. Overloading—Do not overload AC outlets or extension cords. Overloading can cause fire or electric shock.
9. Entering of objects and liquids—Never insert an object into the product through vents or openings. High voltage
flows in the product, and inserting an object can cause electric shock and/or short internal parts. For the same
reason, do not spill water or liquid on the product.
10. Servicing—Do not attempt to service the product yourself. Removing covers can expose you to high voltage and
other dangerous conditions. Request a qualified service person to perform servicing.
11. Repair—If any of the following conditions occurs, unplug the AC cord from the AC outlet, and request a qualified
service person to perform repairs.
a. When the AC cord or plug is damaged.
b. When a liquid was spilled on the product or when objects have fallen into the product.
c. When the product has been exposed to rain or water.
d. When the product does not operate properly as described in the operating instructions.
Do not touch the controls other than those described in the operating instructions. Improper adjustment of
controls not described in the instructions can cause damage, which often requires extensive adjustment work
by a qualified technician.
e. When the product has been dropped or damaged.
f. When the product displays an abnormal condition. Any noticeable abnormality in the product indicates that
the product needs servicing.
12. Replacement parts—In case the product needs replacement parts, make sure that the service person uses
replacement parts specified by the manufacturer, or those with the same characteristics and performance as the
original parts. Use of unauthorised parts can result in fire, electric shock and/or other danger.
2
13. Safety checks—Upon completion of service or repair work, request the service technician to perform safety checks
to ensure that the product is in proper operating condition.
14. Wall or ceiling mounting—When mounting the product on a wall or ceiling, be sure to install the product according
to the method recommended by the manufacturer.
Important Safety Precautions (Continued)
• Cleaning—Unplug the AC cord
from the AC outlet before cleaning
the product. Use a damp cloth to
clean the product. Do not use
liquid cleaners or aerosol
cleaners.
•Water and moisture—Do not use
the product near water, such as
bathtub, washbasin, kitchen sink,
laundry tub, swimming pool and in
a wet basement.
• Stand—Do not place the product
on an unstable cart, stand, tripod
or table. Doing so can cause the
product to fall, resulting in serious
personal injuries as well as
damage to the product. Use only
a cart, stand, tripod, bracket or
table recommended by the
manufacturer or sold with the
product. When mounting the
product on a wall, be sure to
follow the manufacturer’s
instructions. Use only the
mounting hardware recommended
by the manufacturer.
• The LCD panel used in this
product is made of glass.
Therefore, it can break when the
product is dropped or applied
with impact. Be careful not to be
injured by broken glass pieces in
case the LCD panel breaks.
• Heat sources—Keep the product
away from heat sources such as
radiators, heaters, stoves and
other heat-generating products
(including amplifiers).
• Do not place vases or any other
water-filled containers on this
product. The water may spill onto
the product causing fire or electric
shock.
•To prevent fire, never place any
type of candle or naked flames on
the top or near the TV set.
• When relocating the product
placed on a cart, it must be
moved with utmost care. Sudden
stops, excessive force and
uneven floor surface can cause
the product to fall from the cart.
•Ventilation—The vents and other
openings in the cabinet are
designed for ventilation. Do not
cover or block these vents and
openings since insufficient
ventilation can cause overheating
and/or shorten the life of the
product. Do not place the product
on a bed, sofa, rug or other similar
surface, since they can block
ventilation openings. This product
is not designed for built-in
installation; do not place the
product in an enclosed place
such as a bookcase or rack,
unless proper ventilation is
provided or the manufacturer’s
instructions are followed.
•To prevent fire or shock hazard,
do not place the AC power cord
under the TV set or other heavy
items.
The LCD panel is a very high technology product with
921,600 thin film transistors, giving you fine picture
details.
Due to the very large number of pixels, a few
non-active pixels may occasionally appear on the screen
as a fixed point of blue, green or red.
This is within product specifications and does not
constitute a fault.
Do not display a still picture for a long time, as this could
cause an afterimage to remain.
Install the product on the place where the AC cord can
be unplugged easily from the AC outlet, or from the AC
INPUT terminal on the rear of the product.
3
Supplied Accessories
POWER indicator
OPC indicator
Remote sensor
OPC sensor
POWER
LC-15SH1M
LC-15SH1X
LC-20SH1M
LC-20SH1X
Make sure the following accessories are provided with the LCD TV set.
Wireless remote controlOperation manual
“AA” size batteries
(×2)
AC cord
or
Antenna cable
* Product shape may vary
from country to country.
pages 4 and 9page 4page 5
* The LC-15SH1X and
LC-20SH1X models only.
page 5
Preparation
Installing Batteries in the Remote Control
Before using the LCD TV set for the first time, install the two “AA” size batteries (supplied) in the remote control. When the
batteries become depleted and the remote control fails to operate, replace the batteries with new “AA” size batteries.
1 Open the battery cover.2 Insert two “AA” size batteries.3 Close the battery cover.
• Detach the cover
while pressing the
(") part.
Caution!
Precautions regarding batteries
Improper use of batteries can result in a leakage of chemicals and/or explosion. Be sure to follow the instructions below.
•Place batteries with their terminals corresponding to the (+) and (–) indications.
•Different types of batteries have different characteristics. Do not mix batteries of different types.
•Do not mix old and new batteries. Mixing old and new batteries can shorten the life of new batteries and/or cause old
batteries to leak chemicals.
• Remove batteries as soon as they are depleted. Chemicals that leak from batteries can cause a rash. If chemical
leakage is found, wipe it off with a cloth.
• The batteries supplied with the LCD TV set may have a shorter operating time due to storage conditions.
• If the remote control is not to be used for an extended period of time, remove the batteries from the remote control.
•Place batteries with their
terminals corresponding
to the (+) and (–)
indications in the battery
compartment.
12
•Align the tab on the battery cover (1) and place
it while pressing the tab (2) to close it.
4
Using the Remote Control
Use the remote control by pointing it towards the remote sensor
window of the main unit. Objects between the remote control and
sensor window may prevent proper operation.
Cautions regarding use of the remote control
•Do not apply shock to the remote control. In addition, do not
expose the remote control to liquids, and do not place it in an area
with high humidity.
• Do not install or place the remote control under direct sunlight. The
heat may cause deformation of the unit.
• The remote control may not work properly if the remote sensor
window is under direct sunlight or strong lighting. In such a case,
change the angle of the lighting or main unit, or operate the remote
control closer to the remote sensor window.
Power Connection
NOTE
(
MAIN POWER
)
AC INPUT
terminal
(110-240V)
TV VOLUME
10
NOTE
Connect to the AC input terminal of the LCD TV set using the AC cord (supplied).
To AC INPUT terminal
Preparation (Continued)
Household
power outlet
Plug into an AC outlet.
AC cord*
* Product shape may vary
from country to country.
• Unplug the AC cord from the LCD TV set and power outlet when the LCD TV set is not to be used for a long period of time.
Antenna Connection
■Using a TV antenna cable
•Using the antenna cable, connect the room
antenna terminal to the antenna terminal on
the LCD TV set.
(Refer to the figure on the right.)
Headphones
Room antenna terminal
(75-ohm type)
Antenna cable
Listening with Headphones
Antenna
terminal
To antenna
terminal
Plug the headphone mini-plug into the headphone jack
located on the side of the LCD TV set.
Adjust the sound volume using VOL (+)/(–) on the remote
control.
On-screen display
• Headphones are not included in the supplied accessories.
• No sound is heard from the main unit speakers when the
headphone mini-plug is connected into the headphone jack.
• Do not set the volume at a high level. Hearing experts
advise against extended listening at high volume levels.
5
NOTE
Preparation (Continued)
ENGLISH
START SEARCH
NOTE
When you turn on the LCD TV set for the first time, the
First Installation routine, which makes installation easier,
is activated. Using this routine, you can select the onscreen display language, and automatically search for
and store all the receivable TV channels.
• You can also execute the First Installation routine by
selecting “FIRST INSTALLATION” on the SETUP Menu
screen.
For selecting the menu items, see pages 13 and 14.
Upper control panel of the main unit
(MAIN POWER)
First Installation
Press (MAIN POWER) on the LCD TV set.
1
5
• The “FIRST INSTALLATION” screen with a list of the
2
Press '/" to select the desired language, and
press OK.
3
Press OK to execute the automatic programme
search.
4
After “SEARCH IS COMPLETED” is displayed,
press MENU to exit.
languages for the on-screen display is displayed.
• After the First installation routine, you can change the settings
of “LANGUAGE” (page 17), and perform the automatic search
(page 12) again.
6
Part Names of the Main Unit
NOTE
12°
30°
How to adjust the angle
Adjustable range
The examples used throughout this manual are based on the LC-20SH1M model.
Controls
Upper control panel
(MAIN POWER)
TV//VIDEO
MENU
CH ()/() (Channel)
VOL (–)/(+) (Volume)
The screen angle can be tilted backwards
between 12 and 30 degrees. (It cannot be
set to vertical.) When changing the angle,
make sure to hold the stand and adjust the
screen to the best viewable angle.
POWER indicator lights up green when the power is on, and red when in the
standby mode (the indicator will not light when the main power is off).
• TV/VIDEO, CH ()/() (Channel), VOL (–)/(+) (Volume) and MENU on the upper control panel of the main unit have the same
functions as the same buttons on the remote control (see page 13). Fundamentally, this operation manual provides a description based
on operation using the remote control.
POWER indicator
Speaker
OPC (Optical Picture Control) indicator
The OPC indicator lights up green when the “BACKLIGHT” is
set to “AUTO (OPC)”. (See page 17.)
Remote sensor
OPC sensor
7
Part Names of the Main Unit (Continued)
Stand
AC INPUT
terminal
Round lock for Kensington
Security Standard slot
Rear View
AUDIO
AUDIO OUT
INPUT1
INPUT2
L
R
L
R
S-VIDEO
VIDEO
COMPONENT
P
R
(CR)
PB (CB)
Y
AUDIO
L
R
AUDIO
Antenna terminal
Headphone jack
Stand hole
Stand
2
1
Terminals
Pull the cables connected to each terminal.
Insert the cables into the stand hole and fix the cables.
To prevent the LCD TV set from falling over in case
of earthquakes and so on, strap it onto the wall by
threading one end of the string through the loop of
the stand (1) and fastening the LCD TV set with
the string attached to the hook on the wall or the
post, etc. (2).
(An example of strapping the LCD TV set onto the
wall is shown on the right.)
• The string and hook are commercially available.
8
How to Fix the Cables
How to Prevent the LCD TV Set from Falling Over
Loading...
+ 20 hidden pages
You need points to download manuals.
1 point = 1 manual.
You can buy points or you can get point for every manual you upload.