Sharp LC-20S4U Operating Manual

Download

LC-20S4U

LIQUID CRYSTAL TELEVISION TÉLÉVISEUR ACL TELEVISOR CON PANTALLA DE

CRISTAL LÍQUIDO

TELEVISOR DE CRISTAL

LÍQUIDO

ENGLISH

FRANÇAIS

ESPAÑOL

PORTUGUÊS

OPERATION MANUAL MODE D’EMPLOI MANUAL DE OPERACIÓN MANUAL DE OPERAÇÃO

Products that have earned the ENERGY STAR® are designed to protect the environment through superior energy efficiency. Les produits agréés ENERGY STAR® sont conçus pour protéger l’environnement par un rendement énergétique supérieur.

LC-20S4U

LIQUID CRYSTAL TELEVISION

ENGLISH

FRANÇAIS

OPERATION MANUAL

IMPORTANT: To aid reporting in case of loss or theft, please record the TV’s model and serial numbers in the space provided. The numbers are located at the rear of the TV.

Model No.:

Serial No.:

U.S.A. ONLY

IMPORTANT INFORMATION

WARNING: TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK, DO NOT EXPOSE

THIS PRODUCT TO RAIN OR MOISTURE.

CAUTION

RISK OF ELECTRIC SHOCK

DO NOT OPEN

The lightning flash with arrow-head symbol, within an equilateral triangle, is intended to alert the user to the presence of uninsulated “dangerous voltage” within the product’s enclosure that may be of sufficient magnitude to constitute a risk of electric shock to persons.

ESPAÑOL

CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK,

DO NOT REMOVE COVER (OR BACK).

NO USER-SERVICEABLE PARTS INSIDE.

REFER SERVICING TO QUALIFIED SERVICE

PERSONNEL.

The enclosed AC cord must be used with the device. The cable is provided to ensure that the device complies with FCC Rules.

The exclamation point within a triangle is intended to alert the user to the presence of important operating and maintenance (servicing) instructions in the literature accompanying the product.

U.S.A. ONLY

IMPORTANT INFORMATION (Continued)

CAUTION: TO PREVENT ELECTRIC SHOCK, MATCH WIDE BLADE OF PLUG TO WIDE

SLOT, FULLY INSERT.

CAUTION:

DO NOT PLACE THIS PRODUCT ON AN UNSTABLE CART, STAND, TRIPOD, BRACKET, OR TABLE. THE PRODUCT MAY FALL CAUSING SERIOUS PERSONAL INJURY AND SERIOUS DAMAGE TO THE PRODUCT. USE ONLY WITH A CART, STAND, TRIPOD, BRACKET, OR TABLE RECOMMENDED BY THE MANUFACTURER OR SOLD WITH THE PRODUCT. FOLLOW THE MANUFACTURER’S INSTRUCTIONS WHEN INSTALLING THE PRODUCT AND USE MOUNTING ACCESSORIES RECOMMENDED BY THE MANUFACTURER. A PRODUCT AND CART COMBINATION SHOULD BE MOVED WITH CARE. QUICK STOPS, EXCESSIVE FORCE, AND UNEVEN SURFACES MAY CAUSE THE PRODUCT AND CART COMBINATION TO OVERTURN.

WARNING: FCC Regulations state that any unauthorized changes or modifications to this equipment not expressly approved by the manufacturer could void the user’s authority to operate this equipment.

“Note to CATV system installer: This reminder is provided to call the CATV system installer’s attention to Article 820-40 of the National Electrical Code that provides guidelines for proper grounding and, in particular, specifies that the cable ground shall be connected to the grounding system of the building, as close to the point of cable entry as practical.”

This product utilizes tin-lead solder, and fluorescent lamp containing a small amount of mercury. Disposal of these materials may be regulated due to environmental considerations. For disposal or recycling information, please contact your local authorities or the Electronic Industries Alliance: www.eia.org

U.S.A. ONLY

DEAR SHARP CUSTOMER

Thank you for your purchase of the Sharp Liquid Crystal Television. To ensure safety and many years of trouble-free operation of your product, please read the Important Safety Precautions carefully before using this product.

IMPORTANT SAFETY PRECAUTIONS

Electricity is used to perform many useful functions, but it can also cause personal injuries and property damage if improperly handled. This product has been engineered and manufactured with the highest priority on safety. However, improper use can result in electric shock and/or fire. In order to prevent potential danger, please observe the following instructions when installing, operating and cleaning the product. To ensure your safety and prolong the service life of your LCD color TV product, please read the following precautions carefully before using the product.

■ Read instructions—All operating instructions must be read and understood before the product is operated.

■ Keep this manual in a safe place—These safety and operating instructions must be kept in a safe place for future

reference.

■ Observe warnings—All warnings on the product and in the instructions must be observed closely.

■ Follow instructions—All operating instructions must be followed.

■ Attachments—Do not use attachments not recommended by the manufacturer. Use of inadequate attachments

can result in accidents.

■ Power source—This product must operate on a power source specified on the specification label. If you are not sure of the type of power supply used in your home, consult your dealer or local power company. For units designed to operate on batteries or another power source, refer to the operating instructions.

■ Power cord protection—The power cords must be routed properly to prevent people from stepping on them or objects from resting on them. Check the cords at the plugs and product.

■ If the AC adapter is misplaced or needs to be replaced, obtain the same type of adapter from a SHARP service center or your dealer.

■ Overloading—Do not overload AC outlets or extension cords. Overloading can cause fire or electric shock.

■ Entering of objects and liquids—Never insert an object into the product through vents or openings. High voltage flows in the product, and inserting an object can cause electric shock and/or short internal parts. For the same reason, do not spill water or liquid on the product.

■ Servicing—Do not attempt to service the product yourself. Removing covers can expose you to high voltage and other dangerous conditions. Request a qualified service person to perform servicing.

■ Repair—If any of the following conditions occurs, unplug the power cord from the AC outlet, and request a qualified service person to perform repairs. a.When the power cord or plug is damaged. b.When a liquid was spilled on the product or when objects have fallen into the product. c. When the product has been exposed to rain or water. d.When the product does not operate properly as described in the operating instructions.

Do not touch the controls other than those described in the operating instructions. Improper adjustment of

controls not described in the instructions can cause damage, which often requires extensive adjustment work by

a qualified technician. e.When the product has been dropped or damaged. f. When the product displays an abnormal condition. Any noticeable abnormality in the product indicates that the

product needs servicing.

■ Replacement parts—In case the product needs replacement parts, make sure that the service person uses replacement parts specified by the manufacturer, or those with the same characteristics and performance as the original parts. Use of unauthorized parts can result in fire, electric shock and/or other danger.

■ Safety checks—Upon completion of service or repair work, request the service technician to perform safety checks to ensure that the product is in proper operating condition.

■ Wall or ceiling mounting—When mounting the product on a wall or ceiling, be sure to install the product according to the method recommended by the manufacturer.

■ Polarization—This AC adapter may be equipped with a polarized alternating current line plug (a plug having one blade wider than the other). This plug will fit into the power outlet only one way. This is a safety feature. If you are unable to insert the plug fully into the outlet, try reversing the plug. If the plug should still fail to fit, contact your electrician to replace your obsolete outlet. Do not defeat the safety purpose of the polarized plug.

IMPORTANT SAFETY PRECAUTIONS (Continued)

■ Cleaning—Unplug the power cord from the AC outlet before cleaning the product. Use a damp cloth to clean the product. Do not use liquid cleaners or aerosol cleaners.

■ Water and moisture—Do not use the product near water, such as bathtub, washbasin, kitchen sink and laundry tub, swimming pool and in a wet basement.

■ Stand—Do not place the product on an unstable cart, stand, tripod or table. Placing the product on an unstable base can cause the product to fall, resulting in serious personal injuries as well as damage to the product. Use only a cart, stand, tripod, bracket or table recommended by the manufacturer or sold with the product. When mounting the product on a wall, be sure to follow the manufacturer’s instructions. Use only the mounting hardware recommended by the manufacturer.

■ When relocating the product placed on a cart, it must be moved with utmost care. Sudden stops, excessive force and uneven floor surface can cause the product to fall from the cart.

■ Ventilation—The vents and other openings in the cabinet are designed for ventilation. Do not cover or block these vents and openings since insufficient ventilation can cause overheating and/or shorten the life of the product. Do not place the product on a bed, sofa, rug or other similar surface, since they can block ventilation openings. This product is not designed for built-in installation; do not place the product in an enclosed place such as a bookcase or rack, unless proper ventilation is provided or the manufacturer’s instructions are followed.

■ The Liquid Crystal panel used in this product is made of glass. Therefore, it can break when the product is dropped or applied with impact. Be careful not to be injured by broken glass pieces in case the Liquid Crystal panel breaks.

■ Heat sources—Keep the product away from heat sources such as radiators, heaters, stoves and other heat-generating products (including amplifiers).

■ The Liquid Crystal panel is a very high technology product with 921,600 thin film transistors, giving you fine picture details. Occasionally, a few non-active pixels may appear on the screen as a fixed point of blue, green or red. Please note that this does not affect the performance of your product.

ANTENNA LEAD IN WIRE

ANTENNA DISCHARGE UNIT (NEC SECTION 810-20)

GROUNDING CONDUCTORS

(NEC SECTION 810-21) GROUND CLAMPS POWER SERVICE GROUNDING

ELECTRODE SYSTEM (NEC ART 250, PART H)

ELECTRIC SERVICE EQUIPMENT

NEC—NATIONAL ELECTRICAL CODE

GROUND CLAMP

EXAMPLE OF ANTENNA GROUNDING AS PER

NATIONAL ELECTRICAL CODE

IMPORTANT SAFETY PRECAUTIONS (Continued)

■ If an outside antenna is connected to the television equipment, be sure the antenna system is grounded so as to provide some protection against voltage surges and built-up static charges. Section 810 of the National Electrical Code provides information with respect to proper grounding of the mast and supporting structure, grounding of the lead-in wire to an antenna discharge unit, size of grounding conductors, location of antenna-discharge unit, connection to grounding electrodes, and requirements for the grounding electrode.

■ Lightning – For added protection for this television equipment during a lightning storm, or when it is left unattended and unused for long period of time, unplug it from the wall outlet and disconnect the antenna. This will prevent damage to the equipment due to lightning and power-line surges.

■ Power Lines – An outside antenna system should not be located in the vicinity of overhead power lines or other electric light or power circuits, or where it can fall into such power lines or circuits. When installing an outside antenna system, extreme care should be taken to keep from touching such power lines or circuits as contact with them might be fatal.

■ To prevent fire, never place any type of candle or flames on the top or near the TV set.

■ To prevent fire or shock hazard, do not expose this products to dripping or splashing. No objects filled with liquids, such as vases, should be placed on the products.

■ To prevent fire or shock hazard, do not place the AC power cord under the TV set or other heavy items.

■ Do not display a still picture for a long time, as this could cause an afterimage to remain.

IMPORTANT INFORMATION ............................................ 1

DEAR SHARP CUSTOMER .............................................. 3

IMPORTANT SAFETY PRECAUTIONS ............................ 3

Contents............................................................................ 6

Supplied Accessories ...................................................... 7

Preparation ....................................................................... 8

Installing Batteries in the Remote Control ................... 8

Using the Remote Control ........................................... 8

Antenna Connection ................................................... 9

Power Connection ..................................................... 10

Part Names of Main Unit ................................................ 11

Listening with Headphones....................................... 11

How to Fix the Cables ............................................... 12

Part Names of Remote Control ..................................... 13

TV Signals in Your Region ............................................. 13

EZ SETUP (With AUTO CLOCK Setting) ...................... 14

EZ SETUP during the First Power On ........................ 14

Setting the CLOCK ......................................................... 15

AUTO CLOCK Setting ............................................... 15

MANUAL CLOCK Setting .......................................... 16

TIME DISPLAY ........................................................... 16

Basic Operation.............................................................. 17

Turning On and Off the Main Power .......................... 17

Standby .....................................................................17

Switching the Input Modes

(INPUT1/INPUT2/INPUT3/TV) ............................. 17

Sound Volume ........................................................... 18

Changing Channels .................................................. 18

Selecting Menu Items................................................ 19

Basic Adjustment Settings............................................ 21

AV MODE .................................................................. 21

OPC ........................................................................... 21

BACKLIGHT .............................................................. 22

PICTURE Adjustments .............................................. 22

COLOR TEMPERATURE ........................................... 23

AUDIO Adjustments .................................................. 23

Useful Features .............................................................. 24

CH-SETTING ............................................................. 24

SETUP ....................................................................... 25

V-CHIP Settings......................................................... 26

CLOSED CAPTION ................................................... 31

VIEW MODE .............................................................. 32

AUDIO ONLY ............................................................. 32

BLUE SCREEN ..........................................................32

SLEEP TIMER ............................................................33

WAKE-UP TIMER....................................................... 33

NO SIGNAL OFF ....................................................... 34

NO OPERATION OFF ................................................ 34

PICTURE FLIP ........................................................... 34

Connecting External Devices ........................................ 35

Example of External Devices that can be

Connected .......................................................... 35

Outputting Video and Audio (Video Output) ............. 35

Connecting a VCR, DVD Player or a Camcorder

to INPUT1/INPUT2/INPUT3 ................................ 36

Troubleshooting ............................................................. 37

Specifications ................................................................. 38

Calling for Service.......................................................... 39

LIMITED WARRANTY ..................................................... 39

Dimensional Drawings

• The dimensional drawings for the LCD TV set are shown on the inside back cover.

Supplied Accessories

Make sure the following accessories are provided with the LCD TV set.

Wireless remote control

pages 8 and 13 page 10

AC cord

“AAA” size batteries (×2)

AC adapter

page 10

Cable clamp

page 12

• The AC cord enclosed in this product is for 110-125V. In using it on the 125-240V AC, please consult to the following.

SHARP ELECTRONICS CORPORATION 6100 Blue Lagoon Drive, Suite 230, Miami, Florida 33126, U.S.A.

page 8

Operation manual

LC-20S4U

Preparation

HEADPHONE jack

OPC indicator

POWER/WAKE UP TIMER indicator

Remote sensor

OPC sensor

Installing Batteries in the Remote Control

Before using the LCD TV set for the first time, install the two “AAA” size batteries supplied in the remote control. When the batteries become depleted and the remote control fails to operate, replace the batteries with new “AAA” size batteries.

1 Open the battery cover. 2 Insert two “AAA” size batteries. 3 Close the battery cover.

■ Slide the cover while pressing the (

) part.

■ Place batteries with their terminals corresponding to the (+) and (–) indications in the battery compartment.

■ Engaging the lower claw with the remote control, close the cover.

Caution!

Precautions regarding batteries

■ Improper use of batteries can result in a leakage of chemicals and/or explosion. Be sure to follow the instructions below.

• Place batteries with their terminals corresponding to the (+) and (–) indications.

•Different types of batteries have different characteristics. Do not mix batteries of different types.

• Do not mix old and new batteries. Mixing old and new batteries can shorten the life of new batteries and/or cause old batteries to leak chemicals.

• Remove batteries as soon as they are depleted. Chemicals that leak from batteries can cause a rash. If chemical leakage is found, wipe it off with a cloth.

• The batteries supplied with the LCD TV set may have a shorter operating time due to storage conditions.

• If the remote control is not to be used for an extended period of time, remove the batteries from the remote control.

Using the Remote Control

■ Use the remote control by pointing it towards the remote sensor window of the main unit. Objects between the remote control and sensor window may prevent proper operation.

Cautions regarding use of remote control

■ Do not apply shock to the remote control. In addition, do not expose the remote control to liquids, and do not place it in an area with high humidity.

■ Do not install or place the remote control under direct sunlight. The heat may cause deformation of the unit.

■ The remote control may not work properly if the remote sensor window is under direct sunlight or strong lighting. In such a case, change the angle of the lighting or main unit, or operate the remote control closer to the remote sensor window.

Preparation (Continued)

75-ohm

coaxial cable

300-ohm twin-lead

VHF/UHF

antenna

VHF/UHF

antenna

300/75-ohm

adapter

(not supplied)

300-ohm twin-lead

75-ohm coaxial cable

OUT IN

VHF

antenna

UHF

antenna

Combiner

(not supplied)

Antenna Connection

ANTENNAS

• The antenna requirements for good color television reception are more important than those for black & white television reception. For this reason, a good quality outdoor antenna is strongly recommended. The following is a brief explanation of the type of connections that are provided with the various antenna systems.

1. A 75-ohm system is generally a round cable with F-type connector that can easily be attached to a terminal without tools (not supplied).

75-ohm coaxial cable (round)

2. A 300-ohm system is a flat “twin-lead” cable that can be attached to a 75-ohm terminal through a 300/75-ohm adapter (not supplied).

300-ohm twin-lead cable (flat)

OUTDOOR ANTENNA CONNECTION

• Use one of the following two diagrams if you connect an outdoor antenna. A: Using a VHF/UHF combination outdoor antenna B: Using separate VHF and/or UHF outdoor antennas

• Connect the outdoor antenna cable lead-in to ANT. (Antenna terminal) on the rear of the main unit.

A. Combination VHF/UHF Antenna

Antenna cable

(commercially available)

F-type connector

B. Separate VHF and/or

UHF Antennas

NOTICE

75-ohm coaxial cable

F-type connector

ANT. (Antenna terminal)

F-type connector should be finger-tightened only.

When connecting the RF cable to the LCD TV set, do not tighten F-type connector with tools. If tools are used, it may cause damage to your LCD TV set. (The breaking of internal circuit, etc.)

Preparation (Continued)

Antenna Connection (Continued)

CABLE TV (CATV) CONNECTION

•A 75-ohm coaxial cable connector is built into the set for easy hookup. When connecting the 75-ohm coaxial cable to the set, screw the 75-ohm cable to the ANT. terminal.

• Some cable TV companies offer “premium pay channels”. Since the signals of these premium pay channels are scrambled, a cable TV converter/descrambler is generally provided to the subscriber by the cable TV company. This converter/descrambler is necessary for normal viewing of the scrambled channels. (Set your TV to channel 3 or 4, typically one of these channels is used. If this is unknown, consult your cable TV company.) For more specific instructions on installing cable TV, consult your cable TV company. One possible method of utilizing the converter/descrambler provided by your cable TV company is explained below.

Please note: An RF switch provided with two inputs (A and B) is required (not supplied).

“A” position on the RF switch (not supplied): You can view all unscrambled channels by using the TV’s channel keys. “B” position on the RF switch (not supplied): You can view the scrambled channels via the converter/descrambler by

using the converter’s channel keys.

RF switch (not supplied)

OUT

Cable TV converter/

descrambler

(not supplied)

• Consult your SHARP Dealer or Service Center for the type of splitter, RF switch or combiner that might be required.

Two-set signal splitter (not supplied)

Cable TV Line

Power Connection

POWER

POWER INPUT terminal (DC 12V)

AC adapter

Household power outlet

AC cord

■ Using the AC Adapter

• Although the AC adapter may become warm during use, this is not a malfunction.

• Do not wrap or cover the AC adapter with a blanket or similar covering. This can cause a malfunction or accident.

• Do not attempt to disassemble or modify the AC adapter. The insides of the AC adapter contain high-voltage components that can result in the risk of electrical shock.

• When you insert the AC adapter plug into the POWER INPUT terminal of the main unit, make sure that it is fitted firmly.

• Once the AC adapter plug is plugged in, be sure that it is held by the cable holder and fixed neatly.

• Use a commercially available AC plug adapter, if necessary, depending on the design of the wall outlet.

• Unplug the AC adapter from the product and power outlet when not using for a long period of time.

Part Names of Main Unit

Tilt the display by grabbing onto the carrying handle while securely holding down the stand with your other hand.

How to adjust the angle

VOLUME

Controls

Upper control panel

CH (Channel) ( )/( )

VOL (Volume) (–)/(+)

INPUT

POWER

To change the vertical angle of the LCD TV set, tilt the screen up to 2.5 degrees forward or 10 degrees backward. The LCD TV set can also be rotated up to 25 degrees to right and left. Please adjust the angle so that the LCD TV set can be watched most comfortably.

HEADPHONE jack

Speaker

OPC (Optical Picture Control) sensor

Remote sensor

• INPUT, CH ( )/( ), VOL (–)/(+) and MENU on the main unit have the same functions as the same buttons on the remote control. Fundamentally, this operation manual provides a description based on operation using the remote control.

POWER/WAKE UP TIMER indicator

The POWER/WAKE UP TIMER indicator lights up green when the power is on, and red when in the standby mode (the indicator will not light when the main power is off), and orange when the wakeup timer is set (the indicator will light when in the standby mode).

Plug the headphone mini-plug into the Headphone jack located on the front of the main unit.

OPC indicator (Optical Picture Control)

The OPC indicator lights up green when “OPC” is set to “ON”. (See page 21.)

Listening with Headphones

■ Plug the headphone mini-plug into the HEADPHONE jack located on the front of the main unit.

▼ On-screen display

Headphones

• Headphones are not included in the supplied accessories.

• No sound is heard from the main unit speakers when a headphone mini-plug is connected into the HEADPHONE jack.

• Do not set the volume at a high level. Hearing experts advise against extended listening at high volume levels.

Adjust the sound volume using VOL ( + )/(– ) on the remote control.

Part Names of Main Unit (Continued)

Carrying handle

Rear View

Round lock for Kensington Security Standard slot

AUDIO (L)

AUDIO (R)

S-VIDEO

AUDIO (L)

AUDIO (R)

VIDEO

AUDIO (L)

AUDIO (R)

VIDEO

INPUT1

(COMPONENT)

ANT.

(Antenna terminal)

POWER INPUT

(DC 12V)

INPUT2

INPUT3/

OUTPUT

Cable clamp

Terminals

• Secure cables and cords with the supplied cable clamp so that they do not get caught when mounting the covers.

Pull down the hook to open the cover.

How to Fix the Cables

Pull down the hook to open the cover.

Part Names of Remote Control

Switches the Liquid Crystal

POWER (p. 17)

Television power on or standby.

PIC. FLIP (p. 34)

Sets the orientation of the picture.

SLEEP (p. 33)

Sets the sleep timer.

MENU RETURN (p. 19)

Returns to the previous screen.

ENTER

Executes a command.

MUTE (p. 18)

Mutes the sound.

AUDIO ONLY (p. 32)

Outputs audio without screen image.

VOL (+)/(–) (p. 18)

Sets the volume.

DISPLAY

Displays the receiving channel and the current time for 10 seconds.

AV MODE (p. 21)

Selects preferred AV MODE.

BACKLIGHT (p. 22)

Adjusts the brightness of the screen.

' / "/ \ / | (Cursor control)

Selects a desired item on the screen.

MENU (p. 19)

Displays the menu screen.

INPUT (p. 17)

Switches the input source between INPUT1 (COMPONENT), INPUT2, INPUT3 and TV mode.

CC (p. 31)

Displays Closed Caption subtitles.

FLASHBACK (p. 18)

Returns to the previous channel.

CH (

)/( ) (p. 18)

Selects a channel.

(p. 19)

Selects audio settings.

MTS (p. 18)

Channel Select (p. 18)

Sets the channel.

TV Signals in Your Region

This product is factory set to comply with the TV broadcasting system in the United States. For Brazil, Argentina and Uruguay, set the color system according to the country before using this product by following the table below.

Country

U.S.A.

Canada, Mexico, Color: NTSC NTSC (N358) NTSC (N358) Latin America TV ch: US ch US ch US ch

Brazil

Argentina, Color: PAL-N NTSC (N358) NTSC (N358) Set color system to Uruguay TV ch: US ch US ch US ch PAL-N (see page 25)

TV broadcasting

system

Color: NTSC NTSC (N358) NTSC (N358)

TV ch: US ch US ch US ch

Color: PAL-M NTSC (N358) NTSC (N358) Set color system to TV ch: US ch US ch US ch PAL-M (see page 25)

Factory setting of color system User setting

TV Video TV/Video

Not required or N/A

• The 3 Dimensional Y/C separation circuit* only works when the color system is set to N358 in TV mode and Video mode. * The 3 Dimensional Y/C separation circuit is used to remove flickering and color bleeding. * The 3 Dimensional Y/C separation circuit does not function when S-VIDEO or COMPONENT signals are played.

ENGLISH

ESPAÑ OL

FRANÇ AIS

OFF

EZ SETUP (With AUTO CLOCK Setting)

YES

CONNECT ANTENNA

OR CABLE.

PLEASE WAIT

AUTO PROGRAMMING

PLEASE WAIT

NOW SEARCHING TIME

STEREO SAP MONO 11:53AM

Press ENTER to access START EZ SETUP mode.

EZ SETUP during the First Power On

■ When you turn on the TV for the first time, it will automatically memorize the broadcasting channels and clock. Please perform the following instructions before you press POWER. (1)

Insert the batteries into the remote control. (See page 8.)

(2)

Connect the antenna cable to the LCD TV set. (See page 9.)

(3) Connect the AC adapter to the POWER INPUT terminal

of the LCD TV set and plug in the AC cord to the wall outlet. (See page 10.)

POWER

Press POWER, located on the upper side of the main

unit, to turn on the TV. The SELECT LANGUAGE screen will be displayed. Press '/" to select “ENGLISH”, “ESPAÑOL” (Spanish) or “FRANÇAIS” (French).

Press '/" to select “YES”, and press ENTER.

• If you want to stop the EZ SETUP process once it has started, press MENU and it will be canceled. If you want to set up again, please refer to page 24 on CH-SETTING.

The tuner will automatically search for the broadcasting and cable TV channels. (The channel number will automatically increase when it appears.)

The LCD TV set will automatically switch to searching for EDS signals.

If EDS signals are received, the channel number and time will be displayed, and then the screen shown in step 5 appears.

Press ENTER to access CH-SETTING mode.

Press '/" to select “ON” or “OFF”. When you select “ON”, the LCD TV set will automatically memorize the broadcasting channels.

• If you select “OFF”, EZ SETUP will be canceled.

Press ENTER to access AUTO CLOCK mode.

Press '/" to select “ON” or “OFF”. When you select “ON”, the LCD TV set will

automatically adjust the clock to search time-signals (EDS signals), which are provided by some TV stations. The AUTO CLOCK setting may take from several minutes to an hour depending on the number of channels to receive and signal status. If you know the channel of the EDS signal carrier (PBS or other) in your area, select “OFF” and follow the procedure in AUTO CLOCK Setting. (See page 15.)

Once EZ SETUP is completed, the lowest channel

number memorized will be displayed.

• Do not let the EZ SETUP screen remain unattended for a long time.

• If EZ SETUP does not memorize all the channels in your region,

please refer to page 24 for more information on manually memorizing the channels using CH-SETTING.

• It may be difficult to preset when the broadcasting signals are weak, the channel cycle frequency is incorrect or the frequency jamming is occurring around the area. Please refer to page 24 for more information on manually memorizing channels using CH-SETTING.

• If there are no channels with EDS signals or the antenna signal is weak, the AUTO CLOCK setting may not operate. In this case, a “EDS CH IS NOT AVAILABLE.” message will appear and the mode will change to MANUAL CLOCK setting. Refer to page 16 to set the clock manually.

Setting the CLOCK

SETUP

OPTION CH– SETTING MTS

CLOCK

INPUT3 SELECT V – CHIP BLOCK CLOSED CAPTION COLOR SYSTEM LANGUAGE

SET TIME DISPLAY AUTO

MANUAL

SET TIME DISPLAY AUTO

MANUAL

SET TIME DISPLAY EDS CH AUTO

STEREO SAP MONO 11:53AM

AUTO CLOCK Setting

There are two methods of setting the clock: AUTO CLOCK and MANUAL CLOCK. AUTO CLOCK uses EDS signals, which are provided by some TV stations, to automatically adjust the clock. MANUAL CLOCK sets the clock manually in areas where no channel carries EDS signals.

Press MENU to display the Menu screen.

Press \/| to select “SETUP”.

Press '/" to select “CLOCK”, and press ENTER.

Press '/" to select “SET”, and press ENTER.

● If you do not know the channel that carries EDS signals in your area, select “EDS CH” to “AUTO” and press ENTER. If you know the channel of the EDS signal carrier in your area, press \/| to select the channel and press ENTER.

● When set to “AUTO CLOCK”, the time is acquired automatically when main power is turned OFF. (This function will not work when EDS CH is not set.)

• CLOCK: The AUTO CLOCK setting may take from several minutes to an hour depending on the number of channels to receive and signal status.

• EDS CH < AUTO >: If there are no channels with EDS signals or the antenna signal is weak, the AUTO CLOCK Setting may not operate. In such a case, the message “EDS CH IS NOT AVAILABLE.” appears, and the CLOCK setting screen (in step 4 in this page) is displayed. Refer to MANUAL CLOCK Setting on page 16 to set the clock manually.

• EDS CH < Not AUTO >: If the channel you have selected for “EDS CH” is wrong or the EDS signal carrier is weak, or when there is no broadcast, the AUTO CLOCK Setting may not operate. In such cases, the message “EDS CH (XXX) EDS DATA IS NOT AVAILABLE.” appears, and the CLOCK setting screen (in step 4) is displayed as in the case with EDS CH < AUTO >. Follow step 4 and repeat the AUTO CLOCK Setting procedure.

• If broadcasting channels are not memorized, EDS signals cannot be received even when the “EDS CH” is set to “AUTO”. In this case, try EZ SETUP again. (See page 24.)

Press '/" to select “AUTO”, and press ENTER.

■ Backup

The clock function is maintained for about 5 minutes even when the AC adapter has been shut off due to a power outage or when moving the LCD TV set. (Since about 30 minutes are required to charge the backup power supply, it may not be possible to maintain the clock function if the charging time is excessively short.) If the clock setting has been reset, refer to Setting the

CLOCK on pages 15 and 16.

Setting the CLOCK (Continued)

SET TIME DISPLAY ON

OFF

SETUP

OPTION CH– SETTING MTS

CLOCK

INPUT3 SELECT V – CHIP BLOCK CLOSED CAPTION COLOR SYSTEM LANGUAGE

SET TIME DISPLAY AUTO

MANUAL

12:00AM 11:59AM 11:59PM 12:00PM

SET TIME DISPLAY DST OFF TIME 12: AM

1:00AM 2:00AM

3:00AM 4:00AM

1:00AM 2:00AM

MANUAL CLOCK Setting

If there are no channels with EDS signals, set the clock manually using MANUAL CLOCK.

Press MENU to display the Menu screen.

Press \/| to select “SETUP”.

Press '/" to select “CLOCK”, and press ENTER.

Daylight Saving Time (DST) Adjustment

The Daylight Saving-Time changes as shown below, set the DST to “ON” to forward the clock by 1 hour. To rewind the clock by 1 hour, set the DST to “OFF”.

(Spring)

On the first Sunday in April DST starts.

Advances 1 hour.

(Autumn)

On the last Sunday in October DST finishes.

Rewinds 1 hour.

TIME DISPLAY

You can display the current time on the screen.

Press '/" to select “SET”, and press ENTER.

Press '/" to select “MANUAL”, and press ENTER.

Press '/" to select “DST”, and press \/| to select

“ON” or “OFF”. Press '/" to select “TIME”, and press \/| to set the

time, and press ENTER.

• Holding down \/| changes the setting at a high speed.

Press MENU to exit.

• Make sure to press ENTER after adjusting the time. Otherwise, the time will not be set.

• When DST is set to “ON”, the time entered is forwarded by 1 hour.

• Please be sure to set “DST” before setting “TIME”.

Repeat steps 1 to 3 of MANUAL CLOCK Setting on

this page.

Press '/" to select “TIME DISPLAY”, and press

ENTER.

Press '/" to select “ON” or “OFF”, and press

ENTER.

Selected item Description

ON Displays the current time on the screen. OFF No display

Press MENU to exit.

• When you press DISPLAY, the current time is displayed for about 10 seconds.

Basic Operation

INPUT2 mode

INPUT2

INPUT3

INPUT1

480P

INPUT3 mode

INPUT1 (COMPONENT) mode

TV mode

STEREO SAP MONO MONO 11:53AM

Turning On and Off the Main Power

POWER

POWER/WAKE UP TIMER indicator

● Press POWER. The POWER/WAKE UP TIMER indicator instantly changes from red to green and the LCD TV set is turned on.

On-screen display

Switching the Input Modes (INPUT1/ INPUT2/INPUT3/TV)

Turn on the power of the connected video equipment.

Press INPUT to select the applicable input source. The

screen changes in order of INPUT1, INPUT2, INPUT3 and TV mode each time INPUT is pressed.

• The On-screen display disappears after a few seconds.

● To turn off the main power, press POWER again.

Standby

To turn off the LCD TV set

Press POWER. The POWER/WAKE UP TIMER indicator will turn red.

To turn the LCD TV set back on

Press POWER again. The POWER/WAKE UP TIMER indicator will turn green.

• INPUT1: Used for video equipment connected to the COMPONENT input terminals.

• INPUT2: Used for video equipment connected to the INPUT2 input terminals. The S-video input terminal is additionally provided for the INPUT2 terminal. If both the S-video terminal and normal video terminals are connected with cables, the S-video input terminal takes priority.

• INPUT3: INPUT3 mode is used to adjust the preset settings and IN or OUT can be selected. INPUT3 indication is not displayed when OUT is selected. (For details on setting INPUT3 SELECT, see page 25.)

Basic Operation (Continued)

0–

1––

11–

115

VOLUME 50

VOLUME 10

STEREO<ON A I R

ON A I R

SAP M

ONO

Sound Volume

■ To adjust the volume

● Press VOL (+) to increase the sound volume.

The bar indicator shifts right.

● Press VOL (–) to decrease the sound volume. The bar indicator shifts left.

■ To mute the sound

Changing Channels

You can select channels using Channel Select or CH ( )/( ).

• This LCD TV set allows you to select up to 125 channels (1 to 125). To select a channel, enter a 2- or 3-digit number.

■

Using Channel Select

When selecting the channel using Channel Select, complete input of the channel number by holding down the button for the last digit for a moment.

To select a 1- or 2-digit channel number (e.g., Channel 5):

Complete the following procedure within 4 seconds.

Press the

1 2

button. Press the button.

● Press MUTE to temporarily turn off the sound. The MUTE mark

● Press MUTE or VOL (+)/(–) to turn the sound back to the previous level. The mute function is automatically turned off when any of the following buttons are pressed: POWER, MUTE, VOL (+)/(–) or MTS.

• When VOL (+)/(–) is pressed in the Mute mode, the sound turns

on and the volume indicator is displayed.

• The Mute function is canceled when POWER is pressed.

is displayed for 4 seconds.

■ To select MTS (Multichannel TV Sound)

Press MTS to display the MTS screen.

Press MTS to select the MTS settings.

STEREO: stereo audio SAP: secondary audio program MONO: monophonic audio

• “ON AIR” appears when a STEREO or SAP broadcast is being

aired.

• When selecting a 1-digit channel number, do not fail to press the button first.

To select a 3-digit channel number (e.g., Channel 115):

Complete the following procedure within 4 seconds.

Press the

Press the button.

• The 3-digit channel number can be selected only when the

receiving mode is set to CABLE in CH-SETTING. (For details on setting the receiving mode, see page 24.)

Changing channels with CH ( )/( ) on the remote control

Air:

Press CH ( ) and the channels change in the order shown below:

2 → 3 → . . . → 68 → 69 → 2 → 3 → . . .

Press CH ( ) and the channels change in the order shown below:

3 → 2 → 69 → 68 → . . . → 3 → 2 → . . .

Cable: Press CH ( ) and the channels change in the order shown below:

1 → 2 → 3 → . . . → 125 →1 → 2 → 3 → . . .

Press CH ( ) and the channels change in the order shown below:

3 → 2 → 1 → 125 → . . . → 3 → 2 → 1 → . . .

button. Press the button.

■ Using FLASHBACK

● Press FLASHBACK to switch the currently tuned channel

to the previously tuned channel.

● Press FLASHBACK again to switch back to the currently

tuned channel.

PICTURE SAUDIO SETUP

OPTION AV MODE [DYNAMIC] OPC [OFF] BACKLIGHT [

BRIGHT

] CONTRAST [ 45] BRIGHTNESS[ ]– + COLOR [+ 5]– + TINT [ TINT [ ] SHARPNESS [ ]– + ADVANCED RESET

0 0

Selecting Menu Items

PICTURE SAUDIO SETUP

OPTION AV MODE [DYNAMIC] OPC [OFF] BACKLIGHT [

BRIGHT

] CONTRAST [ 45] BRIGHTNESS[ ]– + COLOR [+ 5]– + TINT [ TINT [ ] SHARPNESS [ ]– + ADVANCED RESET

0 0

The menus can be used to adjust the various settings of your LCD TV set. Select the desired menu item by following the steps below. See the next page for each Menu screen.

• The items displayed differ depending on the setting conditions.

• The item selected is displayed in yellow.

• Settings most recently adjusted will be saved in memory.

Basic Operation (Continued)

■ Using the remote control

Press MENU on the remote control to display the Menu

Screen.

Press \/| to select the desired menu item.

• The cursor moves left or right.

• The cursor indicates the selected menu item.

Press '/" to select the desired item, and press \/|

to adjust the selected item.

• For “AV MODE”, “OPC”, “ADVANCED” and “RESET”, press ENTER to display the setting screen.

■ Using the control panel of the main unit

Control panel of the main unit

INPUT

VOL (–)/(+) (Volume )

CH ( )/( ) (Channel)

Press MENU on the main unit to display the Menu

Screen.

Press VOL (–)/(+) to select the desired menu item.

• The cursor moves left or right.

• The cursor indicates the selected menu item.

Press CH (

)/( ) to select the desired item and press

VOL (–)/(+) to adjust the selected item.

• For “AV MODE”, “OPC”, “ADVANCED” and “RESET”, press INPUT to display the setting screen.

Press MENU RETURN to return to the previous screen,

or press MENU to exit.

Press MENU to exit.

Basic Operation (Continued)

MENU[ MENU[

AUDIO

]

PICTURE AUDIO

SETUP

OPTION

TREBLE [ ]– +

BASS [ ]– + BALANCE[ ]L R RESET

MENUMENU [

SETUP

] PICTURE AUDIO SETUP OPTION

CH– SETTING

MTS CLOCK INPUT3 SELECT V– CHIP BLOCK CLOSED CAPTION COLOR SYSTEM LANGUAGE

MENU[ MENU[

OPTION

]

PICTURE AUDIO

SETUP OPTION

VIEW MODE

AUDIO ONLY BLUE SCREEN SLEEP TIMER WAKE– UP TIMER NO SIGNAL OFF ED CA NO OPERATION OFF PICTURE FLIP

SELECT ENTER :

ENTER RETURN :

BACK MENU : EXIT

MENU[ MENU[

PICTURE

]

PICTURE SAUDIO SETUP

OPTION AV MODE [DYNAMIC] OPC [OFF] BACKLIGHT [

BRIGHT

] CONTRAST [ 45] BRIGHTNESS[ ]– + COLOR [+ 5]– + TINT [ TINT [ ] SHARPNESS [ ]– + ADVANCED RESET

0 0

■ Menu setting screens

For details on setting each menu item, refer to the page number indicated below.

• The illustrations and on-screen displays in this manual are for explanation purposes and may vary slightly from the actual

appearance.

• Depending on the setting condition, such as an input mode, it may not be possible to adjust or set some items. In such cases, a message will be displayed on the menu setting screen.

PICTURE

AV MODE ....................................................... 21

OPC ................................................................ 21

BACKLIGHT ................................................... 22

CONTRAST .................................................... 22

BRIGHTNESS ................................................ 22

COLOR ........................................................... 22

TINT ................................................................ 22

SHARPNESS .................................................. 22

ADVANCED .................................................... 23

RESET ............................................................ 22

The bar above is an operational guide for the remote control. The bar will change in accordance with each menu setting screen.

Page

AUDIO

SETUP

OPTION

Page

TREBLE .......................................................... 23

BASS .............................................................. 23

BALANCE ....................................................... 23

RESET ............................................................ 23

Page

CH-SETTING .................................................. 24

MTS ......................................................... 18, 25

CLOCK...................................................... 15, 16

INPUT3 SELECT ............................................ 25

V-CHIP BLOCK ......................................... 26-30

CLOSED CAPTION ........................................ 31

COLOR SYSTEM ..................................... 13, 25

LANGUAGE .............................................. 14, 25

Page

VIEW MODE ................................................... 32

AUDIO ONLY.................................................. 32

BLUE SCREEN .............................................. 32

SLEEP TIMER ................................................ 33

WAKE-UP TIMER........................................... 33

NO SIGNAL OFF ............................................ 34

NO OPERATION OFF .................................... 34

PICTURE FLIP ............................................... 34

Basic Adjustment Settings

STANDARD

DYNAMIC

DYNAMIC(FIXED)

MOVIE

GAME

AV MODE [STANDARD]

AV MODE [DYNAMIC]

AV MODE [DYNAMIC (FIXED)]AV MODE [MOVIE]AV MODE [GAME]

OFF

AV MODE

AV MODE gives you preset options to choose from, to best match the image based on room-brightness and playback software used.

Press MENU to display the Menu Screen.

Press \/| to select “PICTURE”.

Press '/" to select “AV MODE”, and press ENTER.

Press '/" to select desired setting, and press ENTER.

OPC

Automatically adjusts the brightness of the screen.

Press MENU to display the Menu Screen.

Press \/| to select “PICTURE”.

Press '/" to select “OPC”, and press ENTER.

Press '/" to select “ON” or “OFF”, and press ENTER.

Selected item Description

ON Automatically adjusts

OFF No adjustment

Press MENU to exit.

• You can select a different AV MODE item for each input mode. (For example, select “STANDARD” for TV input and “DYNAMIC” for VIDEO input.)

•When “AV MODE” is set to “DYNAMIC (FIXED)”, “NO PICTURE ADJUSTMENTS AVAILABLE IN [DYNAMIC (FIXED)].” is displayed and the items in the PICTURE screen (except “OPC” and “ADVANCED”) cannot be set.

Directly setting the AV MODE

Press AV MODE.

Before the AV MODE display disappears, press

AV MODE again and select your desired setting.

• Each time you press AV MODE, the mode changes as shown below.

Selected item

STANDARD

DYNAMIC

DYNAMIC (FIXED)

MOVIE

GAME

Description

Changing image settings to standard values.

For a clear-cut image emphasizing high contrast for sports viewing.

Changing image settings to factory preset values. No adjustments are allowed.

Controlling the contrast to enable easier viewing of dark images.

Controlling the brightness of video games and other images for easier viewing.

Press MENU to exit.

• When setting to “ON”, the OPC indicator lights up green, senses the surrounding light and automatically adjusts the backlight brightness. Make sure no object obstructs the OPC sensor, which could affect its ability to sense surrounding light.

Basic Adjustment Settings (Continued)

BRIGHT

TINT [

PICTURE

AUDIO

SETUP

OPTION

TINT [

BACKLIGHT

You can adjust the brightness of the picture.

Press MENU to display the Menu Screen.

Press \/| to select “PICTURE”.

Press '/" to select “BACKLIGHT”.

PICTURE SAUDIO SETUP

AV MODE [DYNAMIC] OPC [OFF]

BACKLIGHT [

CONTRAST [ 45] BRIGHTNESS[ ]– + COLOR [+ 5]– + TINT [ SHARPNESS [ ]– + ADVANCED RESET

Press \/| to adjust the item to your desired position.

OPTION

BRIGHT

]

PICTURE Adjustments

You can adjust the picture to your preference with the following picture settings.

Press MENU to display the Menu screen.

Press \/| to select “PICTURE”.

Press '/" to select a specific adjustment item.

PICTURE

AUDIO

SETUP AV MODE [DYNAMIC] OPC [OFF] BACKLIGHT [

CONTRAST [ 45]

BRIGHTNESS[ ]– + COLOR [+ 5]– + TINT [ SHARPNESS [ ]– + ADVANCED RESET

OPTION

BRIGHT

]

Press MENU to exit.

• “BACKLIGHT” cannot be adjusted while “OPC” is set to “ON”.

Directly setting the BACKLIGHT

Press BACKLIGHT to display the BACKLIGHT screen.

Press BACKLIGHT to change the setting.

OPC OFF BACKLIGHT [BRIGHT]

OPC ON BACKLIGHT [AUTO]

• The BACKLIGHT screen automatically disappears in 3 seconds.

• [BRIGHT]: Maximum brightness [NORMAL]: Suitable for viewing in a well-lit area. Saves energy. [DARK]: Sufficiently bright when viewing in dim areas. [VARIABLE]: The brightness can be adjusted to suit your prefer-

[AUTO]: Screen brightness adjusts according to the ambient

• When set to “AUTO”, make sure no object obstructs the OPC sensor, which could affect its ability to sense surrounding light.

ence using \/|.

light of the room to conserve power consumption. The OPC indicator lights up green.

OPC OFF BACKLIGHT [VARIABLE]

OPC OFF BACKLIGHT [NORMAL]

OPC OFF BACKLIGHT [DARK]

Press \/| to adjust the item to your desired position.

Press MENU to exit.

Selected item

BACKLIGHT

CONTRAST

BRIGHTNESS

COLOR

TINT

SHARPNESS

• Select “ADVANCED”, and press ENTER to set “COLOR TEMP.”. See page 23.

• When resetting all adjustment items (except for the items on the “AV MODE”, “OPC” and “ADVANCED” menus) to factory preset values, perform the following procedures.

1 Press '/" to select “RESET” in the PICTURE screen, and

press ENTER.

2 Press '/" to select “YES”, and press ENTER.

\ button

The screen dims

For less contrast

For less brightness

For less color intensity

Skin tones become purplish

For less sharpness

| button

The screen brightens

For more contrast

For more brightness

For more color intensity

Skin tones become greenish

For more sharpness

Basic Adjustment Settings (Continued)

COLOR TEMP. RED [ ]

USER GREEN [ ] BLUE [ ] HIGH RESET MIDDLE

LOW

COLOR TEMPERATURE

You can adjust the color temperature to give a better white balance.

Press MENU to display the Menu screen.

Press \/| to select “PICTURE”.

Press '/" to select “ADVANCED”, and press ENTER.

Press '/" to select “COLOR TEMP.”, and press ENTER.

COLOR TEMP. RED [ ] GREEN [ ] BLUE [ ] HIGH RESET MIDDLE

LOW

Press '/" to select the desired item, and press

ENTER.

Press MENU to exit.

Selected item

USER

HIGH MIDDLE LOW

*When you select “USER”, the following items are adjustable.

Selected item

RED

GREEN

BLUE

USER

0 0

Description

Can set your desired color*

White with Bluish tone

White with Reddish tone

\ \

\ button

\ \

Weaker red Stronger red

Weaker green Stronger green

Weaker blue Stronger blue

| button

AUDIO Adjustments

You can adjust the sound quality to your preference with the following settings.

Press MENU to display the Menu screen.

Press \/| to select “AUDIO”.

Press '/" to select a specific adjustment item.

AUDIO

SETUP TREBLE [ ]– + BASS [ ]– + BALANCE[ ]L R RESET

Press \/| to adjust the item to your desired position.

Press MENU to exit.

Selected item

TREBLE

BASS

BALANCE

• The items on the AUDIO menu cannot be set when “INPUT3 SELECT” is set to “OUT VAO”.

• When resetting all adjustment items to factory preset values, perform the following procedures.

1 Press '/" to select “RESET”, and press ENTER. 2 Press '/" to select “YES”, and press ENTER.

OPTION

0 0 0

\ \

\ button

\ \

For weaker treble For stronger treble

For weaker bass For stronger bass

Decrease audio from Decrease audio from the right speaker the left speaker

| |

| button

| |

• When resetting the items in the “USER” setting to factory preset values, perform the following procedures.

1 Press '/" to select “RESET” in the ADVANCED screen, and

press ENTER.

2 Press '/" to select “YES”, and press ENTER.

EZ SETUP AIR/CABLE AIR CH SEARCH CH MEMORY CABLE

Useful Features

EZ SETUP AIR/CABLE CABLE 1 CH SEARCH CH MEMORY

STEREO SAP MONO

EZ SETUP AIR/CABLE CHANNEL AIR 2 CH SEARCH SKIP ON CH MEMORY

CH-SETTING

■ EZ SETUP

When you move to an area with different broadcasting signals, you may have to set the channel numbers and the time with the EZ SETUP function. To activate EZ SETUP, perform the following procedures.

1 Press '/" to select “CH-SETTING” in the SETUP screen (see

page 20) and press ENTER.

2 Press '/" to select “EZ SETUP”, and press ENTER. 3 Press '/" to select “YES”, and press ENTER.

Refer to page 14 for more information on EZ SETUP.

■ Setting the AIR/CABLE

It is necessary to set the receiving mode to AIR or CABLE channels to receive locally broadcast TV programs.

Press MENU to display the Menu screen.

Press \/| to select “SETUP”.

■ Saving broadcast TV channels in the memory

Repeat steps 1 to 3 of Setting the AIR/CABLE.

Press '/" to select “CH SEARCH”, and press ENTER.

Press ENTER. The tuner will search through all available

channels in your area and add them to the TV memory.

•

To interrupt CH SEARCH, press MENU RETURN. CH SEARCH will stop at the current channel and will not add any higher channels.

■ Adding weak or additional channels or erasing unwanted channels from TV memory

Individual settings of programs can be adjusted.

Press '/" to select “CH-SETTING”, and press ENTER.

Press '/" to select “AIR/CABLE”, and press ENTER.

Press '/" to select desired setting, and press ENTER.

Press MENU to exit.

• Receivable channels of your LCD TV set are: AIR channels: CABLE channels:

VHF: 2 through 13. 1 (HRC and IRC) UHF: 14 through 69. 2 through 125 (STD, HRC and IRC)

Repeat steps 1 to 3 of Setting the AIR/CABLE.

Press '/" to select “CH MEMORY”, and press

ENTER.

Press '/" to move the cursor to “CHANNEL”, and use

\/| or Channel Select to select each desired channel to add or erase.

Press '/" to move the cursor to “SKIP”, and use \/|

to select “ON” or “OFF”.

Press MENU to exit.

• If CH SEARCH is performed again, the previously memorized

channels will be lost.

SETUP

SETUP OPTION

CH– SETTING MTS CLOCK INPUT3 SELECT V – CHIP BLOCK CLOSED CAPTION COLOR SYSTEM LANGUAGE

Press MENU to display the Menu screen.

Press \/| to select “SETUP”.

Press '/" to select desired item, and press ENTER.

Useful Features (Continued)

Press '/" to change the setting, and press ENTER.

Press MENU to exit.

Selected item

MTS

INPUT3 SELECT*

COLOR SYSTEM

LANGUAGE

* “INPUT3 SELECT” cannot be set when “INPUT3” is selected in

“WAKE-UP TIMER” in the OPTION screen.

•

For details about the following items, refer to the each indicated page.

• CH-SETTING ......................... Page 24

• CLOCK .................................. Pages 15 and 16

• V-CHIP BLOCK ..................... Pages 26 to 30

• CLOSED CAPTION ............... Page 31

Factory setting

[STEREO] Stereo audio

[IN]

INPUT3/OUTPUT terminals selected as input terminals

TV mode: N358/PAL-M/PAL-N INPUT mode: N358/N443/PAL/PAL-M/

(INPUT2/INPUT3) [ENGLISH]

PAL-N/SECAM/PAL60

Setting options

[SAP] Secondary

audio program

[MONO] Monophonic

audio

[OUT FAO]

Line Output is selected, Output volume is fixed, Speaker output is available.

[OUT VAO]

Line Output is selected, Output volume is variable, Speaker output is mute.

[ESPAÑOL] [FRANÇAIS]

•

TV mode: This LCD TV is factory set to comply with the color system in the United States (NTSC-N358). For Brazil (PAL-M), Argentina (PAL-N) or Uruguay (PAL-N), adjust the color system before using this LCD TV.

Useful Features (Continued)

V-CHIP Settings

■ V-CHIP

• This function allows TV programs to be restricted and TV usage to be controlled based on FCC data. It prevents children from watching violent or sexual scenes that may be harmful.

• Restriction of TV programs includes two ratings that contain information about the program: the MPAA (Motion Picture Association of America) rating and the TV Parental Guidelines. The MPAA rating is restricted by age. TV Parental Guidelines are restricted by age and content.

• Since a TV program may use either the MPAA rating or the TV Guidelines, both should be adjusted for complete control.

MPAA rating

RATING

G GENERAL AUDIENCES. All ages admitted.

PG PARENTAL GUIDANCE SUGGESTED. Some material may not be suitable for children.

PG-13 PARENTS STRONGLY CAUTIONED. Some material may be inappropriate for children under 13.

age

based

MPAA rating

Example 1:

PG-13 in the age-based rating is blocked, this will also automatically block the higher ratings R, NC-17 and X.

R RESTRICTED. Under 17 requires accompanying parent or adult guardian.

NC-17 NO ONE 17 AND UNDER ADMITTED.

XX is an older rating that is unified with NC-17 but may be encoded in the data of older movies.:

Example 2:

R in the age-based rating is blocked, this will also automatically block the higher ratings NC-17 and X.

• The MPAA rating is only age-based.

TV parental guidelines

content based

⇐

Rating

TV-Y (All children)

TV-Y7 (Direct to Older Children) ✕

⇑

TV-G (General Audience) X

age

TV-PG (Parental Guidance Suggested) ✕✕✕✕

based

TV-14 (Parents Strongly Cautioned) ✕✕✕✕

⇓

TV-MA (Mature Audience Only) ✕✕✕

: The content rating can be set, but this rating is not normally broadcast by TV stations.

✕ : The content rating can be set.

FV V S L D

(Fantasy (Violence) (Sexual (Adult (Sexually

Violence) Situation) Language) Suggestive

⇒

Dialog)

TV parental guidelines

Example:

When TV-Y7 in the age-based rating is set to BLOCK, this will automatically block the higher ratings: TV-G, TV-PG, TV-14 and TV-MA. In addition, D, L, S, V and FV in BLOCK CONTENT are automatically blocked unless you manually set BLOCK CONTENT.

• Age-based ratings can be modified by the content-based ratings, but only in the combinations indicated by an ✕ in the table above.

• Choosing a lower age-based rating blocks the higher age-based ratings regardless of content rating settings.

• If you set TV-Y and TV-Y7 to BLOCK, BLOCK CONTENT will display all items.

Useful Features (Continued)

–

– –

–

MPAA TV GUIDELINES CAN.ENGLISH RATINGS CAN.FRENCH RATINGS STATUS

G G –––––

PG BLOCK

PG– 13 BLOCK R BLOCK NC– 17 BLOCK X BLOCK

MPAA TV GUIDELINES CAN.ENGLISH RATINGS CAN.FRENCH RATINGS STATUS

TVTV– Y ––––– TV– Y7 BLOCK TV– G BLOCK TV– PG BLOCK TV– 14 BLOCK TV– MA BLOCK BLOCK CONTENT [D L S V FV]

TVTV– Y BLOCK TV– Y7 BLOCK TV– G BLOCK TV– PG BLOCK TV– 14 BLOCK TV– MA BLOCK BLOCK CONTENT

[D L S V FV]

D BLOCK L BLOCK S BLOCK V BLOCK FV BLOCK

V-CHIP Settings (Continued)

■ Setting V-CHIP (MPAA rating)

Press MENU to display the Menu screen.

Press \/| to select “SETUP”.

Press '/" to select “V-CHIP BLOCK”, and press ENTER.

“INPUT SECRET NO.” will be displayed. Input the 4-

digit secret number by using Channel Select.

• When you input the secret number for the first time, press ENTER to register. Otherwise, continue to step 5.

Press '/" to select “MPAA”, and press ENTER.

■ Setting V-CHIP (TV GUIDELINES)

● Setting TV GUIDELINES

Repeat steps 1 to 4 of Setting V-CHIP (MPAA rating).

Press '/" to select “TV GUIDELINES”, and press

ENTER.

Press '/" to select the desired item, press \/| to

select “BLOCK”.

If you set “TV-Y7” to “BLOCK”, then “TV-G”, “TV-PG”, “TV-14” and “TV-MA” are automatically blocked. In addition, “D”, “L”, “S”, “V” and “FV” in “BLOCK CONTENT” are automatically blocked.

Press MENU to exit.

Press '/" to select the desired item, press \/| to

select “BLOCK”.

If you set “PG” to “BLOCK”, then “PG-13”, “R”, “NC-17” and “X” are automatically blocked.

Press MENU to exit.

• If you set “G” to “BLOCK”, all ratings are automatically blocked.

• If you set “X” to “BLOCK”, then “G”, “PG”, “PG-13”, “R” and “NC-17” are not blocked.

● Setting BLOCK CONTENT

Repeat steps 1 to 4 of Setting V-CHIP (MPAA rating).

Press '/" to select “TV GUIDELINES”, and press

ENTER.

Press '/" to select “BLOCK CONTENT”, and press

ENTER.

Press '/" to select the desired item, and press \/|

to select “BLOCK” or “–––––” (unblock).

Press MENU to exit.

Useful Features (Continued)

–

– –

–

MPAA TV GUIDELINES CAN.ENGLISH RATINGS CAN.FRENCH RATINGS STATUS

OFF

V– CHIP HAS BEEN ACTIVATED

TV– 14 DLSV

–

– –

–

■ Activating V-CHIP BLOCK

● Setting STATUS

You can activate V-CHIP BLOCK after setting MPAA rating or TV GUIDELINES.

Repeat steps 1 to 4 of Setting V-CHIP (MPAA rating).

(See page 27.)

Press '/" to select “STATUS”, and press ENTER.

Press '/" to select “ON”, and press ENTER.

■ Changing V-CHIP BLOCK settings

Repeat steps 1 to 3 of Setting V-CHIP (MPAA rating),

then “INPUT SECRET NO.” will be displayed. (See page 27.)

Input the 4-digit secret number by using Channel

Select; the V-CHIP select mode will be displayed.

Set the V-CHIP BLOCK again.

■ Changing or clearing the SECRET NUMBER

If you forget the secret number, clear the secret number as follows.

Upper control panel of the main unit

• If “STATUS” is set to “OFF”, V-CHIP BLOCK will not be activated.

Press MENU to exit.

■ Canceling the V-CHIP BLOCK screen while V-CHIP BLOCK is activated

“V-CHIP HAS BEEN ACTIVATED” appears if you watch

a program with the same Program Rating data you configured.

• “V-CHIP HAS BEEN ACTIVATED” will not be displayed if “STATUS” is set to “OFF”.

Press MENU to display “INPUT SECRET NO.”.

CH ( )

VOL (+)

Repeat steps 1 to 3 of Setting V-CHIP (MPAA rating)

(see page 27), or 1 and 2 of Canceling the V-CHIP BLOCK screen while V-CHIP BLOCK is activated,

then “INPUT SECRET NO.” will be displayed.

Press and hold both CH (

unit simultaneously until the message “INPUT SECRET NO.” blinks.

Press MENU to exit.

) and VOL (+) on the main

Input the 4-digit secret number by using Channel Select; V-CHIP BLOCK is temporarily canceled. If you

input an incorrect secret number, “SECRET NO. IS INCORRECT” is displayed. In this case, input the correct secret number.

Useful Features (Continued)

Canadian Rating Systems

• The TV rating systems in Canada are based on the Canadian Radio-Television and Telecommunications Commission (CRTC) policy on violence in television programming.

• While violence is the most important content element to be rated, the structure developed takes into consideration other program content like language, nudity, sexuality and mature themes.

• When setting the V-CHIP on the Canadian system you can choose either the Canadian English ratings or the Canadian French ratings.

Canadian English ratings

Rating

C8e

Age

14e

18e

Canadian French ratings

Description

Children: Intended for younger children under the age of 8 years. Pays careful attention to themes that could threaten their sense of security and well-being.

Children over 8 years old: Contains no portrayal of violence as the preferred, acceptable, or only way to resolve conflict; nor encourage children to imitate dangerous acts which they may see on the screen.

General: Considered acceptable for all age groups. Appropriate viewing for the entire family, contains very little violence, physical, verbal or emotional.

Parental Guidance: Intended for a general audience, but may not be suitable for younger children (under the age of 8) because it could contain controversial themes or issues.

Over 14 Years: Could contain themes where violence is one of the dominant elements of the storyline, but it must be integral to the development of plot or character. Language usage could be profane and nudity present within the context of the theme.

Adults: Intended for viewers 18 years and older and might contain depictions of violence, which while related to the development of plot, character or themes, are intended for adult viewing. Could contain graphic language and portrayals of sex and nudity.

Age

Rating

8anse

13anse

16anse

18anse

Description

General: All ages and children, contains minimal direct violence, but may be integrated into the plot in a humorous or unrealistic manner.

General but inadvisable for young children: May be viewed by a wide public audience, but could contain scenes disturbing to children under 8 who cannot distinguish between imaginary and real situations. Recommended for viewing with parent.

Over 13 years: Could contain scenes of frequent violent scenes and therefore recommended for viewing with parent.

Over 16 years: Could contain frequent violent scenes and intense violence.

Over 18 years: Only for adult viewing. Could contain frequent violent scenes and extreme violence.

Useful Features (Continued)

–

– –

–

MPAA TV GUIDELINES CAN.ENGLISH RATINGS CAN.FRENCH RATINGS STATUS

C BLOCK C8+ BLOCK G BLOCK PG BLOCK 14+ BLOCK 18+ BLOCK

G BLOCK 8 ans+ BLOCK 13 ans+ BLOCK 16 ans+ BLOCK 18 ans+ BLOCK

MPAA TV GUIDELINES CAN.ENGLISH RATINGS CAN.FRENCH RATINGS STATUS

OFF

■ Setting V-CHIP (Canadian English ratings)

Press MENU to display the Menu screen.

Press \/| to select “SETUP”.

Press '/" to select “V-CHIP BLOCK”, and press ENTER.

• Secret number setting menu is displayed only when “SECRET NO.” is set. (See page 27.)

• “V-CHIP BLOCK” and “STATUS” will not be selectable from the menu if you do not first configure your secret number. (See page 27.)

Input the 4-digit secret number by using Channel Select.

Press '/" to select “CAN. ENGLISH RATINGS”, and

press ENTER.

■ Setting V-CHIP (Canadian French ratings)

Repeat steps 1 to 4 of Setting V-CHIP (Canadian English

ratings).

Press '/" to select “CAN. FRENCH RATINGS”, and

press ENTER.

Press '/" to select the desired item, press \/| to select “BLOCK” and press ENTER.

Press MENU to exit.

• The setting automatically enters “BLOCK” for any ratings below your selection.

• If you set “G” to “BLOCK”, all ratings are automatically blocked.

■ Activating V-CHIP BLOCK

● Setting STATUS

You can activate “V-CHIP BLOCK” after setting Canadian English ratings or Canadian French ratings.

Press '/" to select the desired item, press \/| to select

“BLOCK” and press ENTER.

Press MENU to exit.

• The setting automatically enters “BLOCK” for any ratings below your selection.

• If you set “C” to “BLOCK”, all ratings are automatically blocked.

Repeat steps 1 to 4 of Setting V-CHIP (Canadian

English ratings).

Press '/" to select “STATUS”, and press ENTER.

Press '/" to select “ON”, and press ENTER.

• If “STATUS” is set to “OFF”, “V-CHIP BLOCK” will not be activated.

Press MENU to exit.

Useful Features (Continued)

OFF

CC1

CC2

CC/TEXT[OFF]

CC/TEXT [OFF]

CC/TEXT [T2] CC/TEXT [T1]

CC/TEXT [CC1]

CC/TEXT [CC2]

CLOSED CAPTION

■ Setting CLOSED CAPTION

• This LCD TV set is equipped with an internal Closed Caption

decoder. “Closed Caption” is a system which allows conversations, narration, and sound effects in TV programs and home videos to be viewed as captions on the TV screen (see the illustration).

• Not all programs and videos will offer closed captioning. Please look for the “ ” symbol to ensure that captions will be shown.

• The Closed Caption broadcasts can be viewed in two modes: CAPTION and TEXT. For each mode, two channels are available: CH1 and CH2. The CAPTION mode shows subscripts of dialogs and commentaries of TV dramas and news programs while allowing a clear view of the picture. The TEXT mode displays various information over the picture (such as TV program schedules and weather forecasts, etc.) that is independent of the TV programs.

Setting the CLOSED CAPTION on the MENU screen

Directly setting the CLOSED CAPTION

Press CC to display the CC/TEXT screen.

Press CC to change the setting.

• CC1: CLOSED CAPTION mode for CH1 data CC2: CLOSED CAPTION mode for CH2 data T1: TEXT mode for CH1 data T2: TEXT mode for CH2 data

Press MENU to display the Menu screen.

Press \/| to select “SETUP”.

Press '/" to select “CLOSED CAPTION ”, and press

ENTER.

Press '/" to change the CLOSED CAPTION setting,

and press ENTER.

• CC1: CLOSED CAPTION mode for CH1 data CC2: CLOSED CAPTION mode for CH2 data T1: TEXT mode for CH1 data T2: TEXT mode for CH2 data

• If a broadcast contains Closed Caption data and MUTE is pressed, the LCD TV set enters CLOSED CAPTION mode automatically. Pressing MUTE again will return the LCD TV set to its previous condition.

• Closed Caption may malfunction (white blocks, strange characters, etc.) if signal conditions are poor or if there are problems at the broadcast source. This does not necessarily indicate a problem with your LCD TV set.

• If any button is pressed to call up the On-Screen Display while viewing a Closed Caption broadcast, the closed captions will disappear momentarily.

• If no TEXT broadcast is being received while viewing in the TEXT mode, the screen may become blank for some programs. Should this occur, switch the CLOSED CAPTION mode to OFF.

• If you select “CC1”, “CC2”, “T1” or “T2” (or MUTE is pressed) while “VIEW MODE” is set to “ZOOM” or “STRETCH”, “VIEW MODE” will be changed to “4:3” or “16:9” automatically.

Press MENU to exit.

Useful Features (Continued)

OFF

AUDIO ONLY [OFF] PRESS"AUDIO ONLY"FOR VIDEO OFF

4:3

16:9

ZOOM

STRETCH

OFF

VIEW MODE

You can select the picture display size for the playback image of the DVD player from the following four modes: “4:3”, “16:9”, “ZOOM” and “STRETCH”.

Press MENU to display the Menu screen.

Press \/| to select “OPTION”.

Press '/" to select “VIEW MODE”, and press ENTER.

Press '/" to select desired setting, and press ENTER.

AUDIO ONLY

When listening to music from a music program, you can set the Liquid Crystal display off and enjoy audio only.

Setting the AUDIO ONLY on the Menu screen

Repeat steps 1 and 2 of VIEW MODE.

Press '/" to select “AUDIO ONLY”, and press ENTER.

Press '/" to select “ON”, and press ENTER.

Selected item

OFF

Audio is output without screen image.

Both screen images and audio are output.

Description

Selected item

4:3

16:9

ZOOM

STRETCH

Image type 4:3 16:9 ZOOM STRETCH

(For an image

stretched vertically)

(For an image

stretched vertically

with bands at the left

and right sides)

(For a 4:3 image)

Displays the image in a 4:3 size.

Stretches the image horizontally to display it in a 16:9 size.

Displays the center part of the image by enlarging it towards the horizontal and vertical directions.

Stretches the image horizontally.

Description

Directly setting the AUDIO ONLY

Press AUDIO ONLY. ‘PRESS “AUDIO ONLY” FOR

VIDEO OFF’ is displayed on the screen.

Press AUDIO ONLY again. The screen image will disappear.

Press AUDIO ONLY again. The screen image will be

displayed again.

BLUE SCREEN

This function automatically turns the screen blue if no broadcast signal is received.

Repeat steps 1 and 2 of VIEW MODE.

Press '/" to select “BLUE SCREEN”, and press ENTER.

Press MENU to exit.

•

The 4:3 image will be distorted on the screen when the “VIEW MODE” is set to “16:9”.

• When the CLOSED CAPTION mode is set to “CC1”, “CC2”, “T1” or “T2”, “ZOOM” and “STRETCH” cannot be set for “VIEW MODE”.

Press '/" to select “ON”, and press ENTER.

Press MENU to exit.

• When received signals are weak or interfered with by some other signals, the BLUE SCREEN function may be activated. To watch the TV under such conditions, set “BLUE SCREEN” to “OFF”.

• The BLUE SCREEN function is activated when INPUT mode is selected with no signal being input.

Useful Features (Continued)

3 MIN OFF

6 MIN

9 MIN

12 MIN

15 MIN

SLEEP TIMER [OFF]

[OFF] [30MIN] [60MIN]

[90MIN][120MIN][150MIN]

(minutes)

TIMER OFF

TIME 7: AM CHANNEL 1 VOLUME 2

0 0

SLEEP TIMER

You can set the SLEEP TIMER to automatically turn off the TV.

POWER

Setting the SLEEP TIMER on the Menu screen

Press MENU to display the Menu screen.

Press \/| to select “OPTION”.

Press '/" to select “SLEEP TIMER”, and press ENTER.

Press '/"/\/| to select “30MIN”, “60MIN”, “90MIN”,

“120MIN”, “150MIN” or “OFF”, and press ENTER.

WAKE-UP TIMER

You can set the WAKE UP TIMER to automatically turn on the TV.

Repeat steps 1 and 2 of SLEEP TIMER.

Press '/" to select “WAKE-UP TIMER”, and press

ENTER.

Press '/" to select the items, and press \/| to

adjust them.

Selected item

TIMER

TIME

CHANNEL

VOLUME

To activate the WAKE-UP TIMER, set this item to “ON”.

Set the time at which you want to turn on the TV.

Set the TV channel or input mode when the TV is turned on.

Set the volume when the TV is turned on.

Description

Press MENU to exit.

• After you set the SLEEP TIMER, pressing POWER on the main unit or POWER on the remote control will cancel the SLEEP TIMER setting.

•5 minutes before the SLEEP TIMER turns off the LCD TV, “5 MIN REMAINING” is displayed on the screen for 4 seconds. The SLEEP TIMER counts down and shows a similar 4-second display for each remaining minute until the timer turns off the LCD TV set.

Directly setting the SLEEP TIMER

Press SLEEP to display the SLEEP TIMER screen.

Press SLEEP to set the sleep timer (in minutes).

Press MENU to exit.

Make sure to turn off the LCD TV with the remote

control.

• The WAKE-UP TIMER will not be activated if the LCD TV is turned off with POWER on the main unit.

• When you set “WAKE-UP TIMER”, the POWER indicator lights up orange while in the standby mode.

• Be sure to adjust the clock with “CLOCK” in “SETUP” before setting “SLEEP TIMER” and “WAKE-UP TIMER”.

• You can output the picture and sound of the external device with the WAKE-UP TIMER function. Make sure that the external device turns on at the time you specified.

• The CHANNEL setting for “WAKE-UP TIMER” changes in the following order: INPUT1→INPUT2→INPUT3→TV (AIR or CABLE)* * The skipped channels cannot be selected.

• When not using LCD TV set for a long period of time, either turn the main power off or set “WAKE-UP TIMER” to “OFF”.

• When “WAKE-UP TIMER” has been set to “ON”, the TV is turned on at the set time every day until it is set to “OFF”.

• After the TV has been turned “ON” by “WAKE-UP TIMER”, “SLEEP TIMER” is automatically set to 120 minutes for safety reason.

• The time that is currently set can be checked on the screen by pressing DISPLAY.

• When the time set for “WAKE-UP TIMER” is reached when the power is on, the TV changes to the set channel. The volume does not change at this time.

• The SLEEP TIMER screen automatically disappears in 3 seconds.

Useful Features (Continued)

ENABLE

DISABLE

ENABLE

DISABLE

NORMAL

MIRROR

ROTATEROTATE

UPSIDE DOWNUPSIDE DOWN

PICTURE FLIP [NORMAL]

PICTURE FLIP [UPSIDE DOWN]

PICTURE FLIP [MIRROR]

PICTURE FLIP [ROTATE]

NO SIGNAL OFF

Power control setting allows you to save energy. When set to “ENABLE”, the power will automatically shut down if no signal inputs for 5 minutes.

Press MENU to display the Menu screen.

Press \/| to select “OPTION”.

Press '/" to select “NO SIGNAL OFF”, and press

ENTER.

Press '/" to select “ENABLE”, and press ENTER.

PICTURE FLIP

You can set the orientation of the picture.

Setting the PICTURE FLIP on the MENU screen

Repeat steps 1 and 2 of NO SIGNAL OFF.

Press '/" to select “PICTURE FLIP”, and press

ENTER.

Press '/" to select the desired mode, and press

ENTER.

Press MENU to exit.

• “DISABLE” is factory preset value.

• This function can work only in TV mode.

• If interfered with by other broadcast or radio waves, “NO SIGNAL OFF” may not work properly even when the broadcast is over.

NO OPERATION OFF

When set to “ENABLE”, the power will automatically shut down if there is no operation for 3 hours.

Repeat steps 1 and 2 of NO SIGNAL OFF.

Press '/" to select “NO OPERATION OFF”, and press ENTER.

Press '/" to select “ENABLE”, and press ENTER.

•5 minutes before the power shuts down, remaining time is displayed every minute.

Press MENU to exit.

Directly setting the PICTURE FLIP

Press PIC.FLIP to display the PICTURE FLIP screen.

Press PIC.FLIP to change the setting.

[NORMAL] Normal image orientation.

[UPSIDE DOWN] To display upside down images for special uses.

[MIRROR] To display mirror images for special uses.

[ROTATE] To display rotated images for special uses.

• “DISABLE” is factory preset value.

Connecting External Devices

• DVD Player, etc.

• Digital TV tuner

To INPUT1 terminal

* If your external device has a component terminal, COMPONENT connection is recommended (you can view high-quality pictures).

To INPUT2 terminal

• Camcorder

• Home video game system

* If your external device has an S-video terminal, S-VIDEO connection is recommended.

• VCR

• Laser disc player

• Audio amplifier

To INPUT3/OUTPUT terminal

You can enjoy picture and sound by connecting a VCR or a home video game system to the terminals located on the rear of the main unit. When connecting an external device, turn off the POWER of the main unit first to prevent any possible damage.

Example of External Devices that can be Connected

ANote:

• PC connection is not possible.

• For the cable, use a commercially available audio/video cable.

• Only connect audio/video signals to INPUT2 and INPUT3/OUTPUT terminals. Connecting other signals may result in a malfunction.

• INPUT2 has 2 video input terminals: VIDEO and S-VIDEO. When you connect external devices to both terminals (and if you select “INPUT2”), you can only view pictures from the S-VIDEO terminal. To view the picture from the VIDEO terminal, do not connect any external device to the S-VIDEO terminal.

• For more information about external device connections, see the manuals of your external devices.

Outputting Video and Audio (Video Output)

You can output video and audio signals from the TV set through the INPUT3/OUTPUT terminal.

• When using INPUT3/OUTPUT as an output terminal, select “SETUP” in the Menu and set “INPUT3 SELECT” to “OUT”. (See page 25.)

• The factory setting for “INPUT3 SELECT” is “IN”.

• The INPUT3/OUTPUT terminal has 2 output modes (see page 25).

• When using the S-VIDEO input for INPUT2, or Y, PB or PR input for COMPONENT, no video output will be made to the AV output terminal,

but audio output will be made for connection to external audio systems.

Connecting External Devices (Continued)

VCR

DVD Player

Camcorder

Video

Audio (L)

Audio (R)

Audio (L)

Audio (R)

Video

Audio (L)

Audio (R)

S-Video

Component cable (commercially available)

Audio cable (commercially available)

S-Video cable (commercially available)

Audio/Video cable (commercially available)

Connecting a VCR, DVD Player or a Camcorder to INPUT1/INPUT2/INPUT 3

ANote:

• If your VCR (or other external devices) has an S-video terminal, S-VIDEO connection is recommended. (Use an S-video cable.)

• When you connect external devices to both S-VIDEO and VIDEO terminals (and if you select “INPUT2”), you can only view pictures from the S-VIDEO terminal.

• You cannot view multiple or synthesized pictures by connecting two or more external devices. When connecting an external device, use care to connect the video and audio cables to the corresponding terminals.

• Only when 480I, 480P or 576I signal is received, picture can be displayed.

Troubleshooting

■ Before calling for repair services, make the following checks for possible remedies to the encountered symptoms.

LCD TV set

Sound

Problem Check item

• Make sure the AC adapter is properly inserted in the

Picture

There is no picture or sound.

power outlet.

• Reception other than those of broadcasting stations can be considered.

• Make sure the input mode is set to TV.

• Make sure the POWER switch of the main unit is on.

Picture

There is no picture. There is no picture from INPUT2 or INPUT3.

• Make sure the BRIGHTNESS is properly adjusted.

• Fluorescent lamp may have reached the end of service life.

• Make sure the S-VIDEO terminal has nothing connected.

• Make sure the AUDIO ONLY is not set to ON.

• Make sure the volume is not set to minimum.

There is no sound.

There is no picture or

• Make sure the sound is not set to mute.

• Make sure that headphones are not connected.

• Make sure the antenna cable is properly connected.

• Bad reception could be the problem.

sound, just noise.

Reference page

–

17 17

22 38

36 32

18 18 11

9, 10

–

Picture is not clear.

Picture is light or improperly tinted.

The picture is too dark.

Remote control does not work.

The clock (AUTO CLOCK) cannot be set.

• Make sure the antenna cable is properly connected.

• Bad reception could be the problem.

• Check color adjustment.

• Check COLOR SYSTEM setting.

• Press the BACKLIGHT button or set the BACKLIGHT or BRIGHTNESS settings.

• Check CONTRAST and BRIGHTNESS adjustment.

• Fluorescent lamp may have reached the end of service life.

• Check the batteries of the remote control.

• Make sure the remote sensor window is not under strong lighting.

• The broadcasted EDS signal may be weak. Check the antenna.

• Carry out EZ SETUP or Setting the CLOCK again.

• If EDS signal is not sent, set the clock using MANUAL CLOCK Setting.

9, 10

–

22 25

22 38

8 8

–

14-16, 24

Unit cannot be operated.

• External influences such as lightning, static electricity, etc., may cause improper operation. In this case, operate the unit after first turning the power off the LCD TV set, or unplugging the AC cord and re-plugging it in after 1 or 2 minutes.

–

Troubleshooting (Continued)

Antenna

Problem

Check item

• The reception may be weak. The picture is not sharp. The picture moves.

• The quality of the broadcast may also be bad.

• Make sure the antenna is facing the right direction.

• Make sure the outside antenna is connected.

The picture is doubled or tripled.

• Make sure the antenna is facing the right direction.

•There may be reflected electric waves from mountains or buildings.

• There may be interference from automobiles, trains, high voltage lines,

The picture is spotted.

neon lights, etc.

• There may be interference between the antenna cable and AC cord. Try

positioning them further apart.

• Is the unit receiving interference from other devices?

Transmission antennas of radio broadcasting stations, transmission antenThere are stripes on the screen or colors fade.

nas of amateur radios and cellular phones may also cause interference.

• Use the unit as far apart as possible from devices that may cause possible interference.

■ Cautions regarding use in high and low temperature environments

• When the unit is used in a low temperature space (e.g. room, office), the picture may leave trails or appear slightly delayed. This is not a malfunction, and the unit will recover when the temperature returns to normal.

• Do not leave the unit in a hot or cold location. Also, do not leave the unit in a location exposed to direct sunlight or near a heater, as this may cause the cabinet to deform and the LCD panel to malfunction. Storage temperature: –4°F to +140°F (–20°C to +60°C)

Specifications

Items

LCD panel 20" Advanced Super View & BLACK TFT LCD Number of dots 921,600 dots VGA Video color systems N358, N443, PAL, PAL-M, PAL-N, SECAM, PAL-60

TV Standard (CCIR) NTSC/PAL-M/PAL-N

TV function

Y/C FILTER 3D Y/C FILTER Brightness 450 cd/m Lamp life (Fluorescent lamp) 60,000 hours* Viewing angles H: 170° V: 170° Audio amplifier 2.1 W × 2 Speakers 1 37/

Terminals INPUT3/OUTPUT AUDIO-IN, VIDEO-IN / AUDIO-OUT, VIDEO-OUT

OSD language English/Spanish/French Power supply DC 12V, AC 110-240V, 50/60Hz (AC adapter), AC 110-125V (AC cord) Power consumption 73 W (0.15 W standby): AC 120V

Weight 15.2 lbs. (6.9 kg) w/o accessories

TV Tuning System PLL 181 ch. STEREO MTS+SAP CATV 125 ch.

INPUT1 AUDIO-IN, COMPONENT-IN INPUT2 AUDIO-IN, VIDEO-IN, S-VIDEO-IN

Antenna F-Type Headphone Mini-jack for stereo (ø3.5 mm)

Model

× 4 21/

63 W: DC 12V

in. (4 × 11cm), 2 pcs.

LC-20S4U

* Typical time for power output decrease of about one-half assuming continuous use in a room with normal lighting, normal brightness and

temperature at 77°F/25°C

Dimensional Drawings

• The dimensional drawings for each model are shown on the inside back cover.

■ As a part of policy of continuous improvement, SHARP reserves the right to make design and specification changes for product improvement without prior notice. The performance specification figures indicated are nominal values of production units. There may be some deviations from these values in individual units.

Calling for Service

For location of the nearest Sharp Authorized Service, or to obtain product literature, accessories, supplies, or customer assistance, please call 1-800-BE-SHARP.

LIMITED WARRANTY

CONSUMER LIMITED WARRANTY

SHARP ELECTRONICS CORPORATION warrants to the first consumer purchaser that this Sharp brand product (the “Product”), when shipped in its original container, will be free from defective workmanship and materials, and agrees that it will, at its option, either repair the defect or replace the defective Product or part thereof with a new or remanufactured equivalent at no charge to the purchaser for parts or labor for the period(s) set forth below.

This warranty does not apply to any appearance items of the Product nor to the additional excluded item(s) set forth below nor to any Product the exterior of which has been damaged or defaced, which has been subjected to improper voltage or other misuse, abnormal service or handling, or which has been altered or modified in design or construction.

In order to enforce the rights under this limited warranty, the purchaser should follow the steps set forth below and provide proof of purchase to the servicer.

The limited warranty described herein is in addition to whatever implied warranties may be granted to purchasers by law. ALL IMPLIED WARRANTIES INCLUDING THE WARRANTIES OF MERCHANTABILITY AND FITNESS FOR USE ARE LIMITED TO THE PERIOD(S) FROM THE DATE OF PURCHASE SET FORTH BELOW. Some states do not allow limitations on how long an implied warranty lasts, so the above limitation may not apply to you.

Neither the sales personnel of the seller nor any other person is authorized to make any warranties other than those described herein, or to extend the duration of any warranties beyond the time period described herein on behalf of Sharp.

The warranties described herein shall be the sole and exclusive warranties granted by Sharp and shall be the sole and exclusive remedy available to the purchaser. Correction of defects, in the manner and for the period of time described herein, shall constitute complete fulfillment of all liabilities and responsibilities of Sharp to the purchaser with respect to the Product, and shall constitute full satisfaction of all claims, whether based on contract, negligence, strict liability or otherwise. In no event shall Sharp be liable, or in any way responsible, for any damages or defects in the Product which were caused by repairs or attempted repairs performed by anyone other than an authorized servicer. Nor shall Sharp be liable or in any way responsible for any incidental or consequential economic or property damage. Some states do not allow the exclusion of incidental or consequential damages, so the above exclusion may not apply to you.

THIS WARRANTY GIVES YOU SPECIFIC LEGAL RIGHTS. YOU MAY ALSO HAVE OTHER RIGHTS WHICH VARY FROM STATE TO STATE.

Model Specific Section

Your Product Model Number & Description:

Warranty Period for this Product:

Additional Item(s) Excluded from Warranty Coverage (if any):

Where to Obtain Service:

What to do to Obtain Service:

LC-20S4U LCD Color Television

(Be sure to have this information available when you need service for your Product.)

One (1) year parts and labor from the date of purchase.

Non-rechargeable batteries.

From a Sharp Authorized Servicer located in the United States. To find the location of the nearest Sharp Authorized Servicer, call Sharp toll free at 1-800-BE-SHARP.

Ship prepaid or carry in your Product to a Sharp Authorized Servicer. Be sure to have Proof of Purchase available. If you ship the Product, be sure it is insured and packaged securely.

TO OBTAIN PRODUCT INFORMATION, CALL 1-800-BE-SHARP OR VISIT www.sharpusa.com

SHARP ELECTRONICS CORPORATION

Sharp Plaza, Mahwah, New Jersey 07430-2135

SHARP CORPORATION

LIMITED WARRANTY

Consumer Electronics Products

Congratulations on your purchase!

Sharp Electronics of Canada Ltd. (hereinafter called “Sharp”) gives the following express warranty to the first consumer purchaser for this Sharp brand product, when shipped in its original container and sold or distributed in Canada by Sharp or by an Authorized Sharp Dealer:

Sharp warrants that this product is free, under normal use and maintenance, from any defects in material and workmanship. If any such defects should be found in this product within the applicable warranty period, Sharp shall, at its option, repair or replace the product as specified herein.

This warranty shall not apply to: (a) Any defects caused or repairs required as a result of abusive operation, negligence, accident, improper installation or inappropriate

use as outlined in the owner’s manual.

(b) Any Sharp product tampered with, modified, adjusted or repaired by any party other than Sharp, Sharp’s Authorized Service Centres

or Sharp’s Authorized Servicing Dealers.

(c) Damage caused or repairs required as a result of the use with items not specified or approved by Sharp, including but not li mited to

head cleaning tapes and chemical cleaning agents.

(d) Any replacement of accessories, glassware, consumable or peripheral items required through normal use of the product including but

not limited to earphones, remote controls, AC adapters, batteries, temperature probe, stylus, trays, filters, belts, ribbons, cables and

paper. (e) Any cosmetic damage to the surface or exterior that has been defaced or caused by normal wear and tear. (f) Any damage caused by external or environmental conditions, including but not limited to transmission line/power line voltage or liquid

spillage. (g) Any product received without appropriate model, serial number and CSA/cUL markings. (h) Any products used for rental or commercial purposes. (i) Any installation, setup and/or programming charges.

Should this Sharp product fail to operate during the warranty period, warranty service may be obtained upon delivery of the Sharp product together with proof of purchase and a copy of this LIMITED WARRANTY statement to an Authorized Sharp Service Centre or an Authorized Sharp Servicing Dealer. In home warranty service may be provided at Sharp’s discretion on any Sharp television with the screen size of 27” or larger and on any Sharp Over-the-Range Microwave Oven.

This warranty constitutes the entire express warranty granted by Sharp and no other dealer, service centre or their agent or employee is authorized to extend, enlarge or transfer this warranty on behalf of Sharp. To the extent the law permits, Sharp disclaims any and all liability for direct or indirect damages or losses or for any incidental, special or consequential damages or loss of profits resulting from a defect in material or workmanship relating to the product, including damages for the loss of time or use of this Sharp product or the loss of information. The purchaser will be responsible for any removal, reinstallation, transportation and insurance costs incurred. Correction of defects, in the manner and period of time described herein, constitute complete fulfillment of all obligations and responsibilities of Sharp to the purchaser with respect to the product and shall constitute full satisfaction of all claims, whether based on contract, negligence, strict liability or otherwise.

WARRANTY PERIODS:

Parts & Labour (exceptions noted)

Audio Products 1 year Camcorder 1 year DVD Products 1 year Projector 1 year (lamp 90 days) LCD & Plasma Display TV 1 year Microwave Oven 1 year (magnetron component-4 additional years) Television Products 1 year (picture tube component-1 additional year) VCR Products 1 year Vacuum Cleaner 1 year

To obtain the name and address of the nearest Authorized Sharp Service Centre or Dealer, please contact:

SHARP ELECTRONICS OF CANADA LTD. 335 Britannia Road East, Mississauga, Ontario L4Z 1W9

For more information on this Warranty, Sharp Extended Warranty

Offers, Sharp Canada Products, Accessory Sales, Dealer or Service

Locations, please call (905) 568-7140

Visit our Web site: www.sharp.ca

VALID IN CANADA ONLY

Revision 04/22/03

Dimensional Drawings

3 15/

(100)

(117)

(310)

(483)

(403.3)

(300.8)

(294.4)

5 21/

(135)

(148)

(94)2 7/

(53.4)

(477)

(447)

(250.1)

(100)

(50)

(44.3)

8 53/

(224)

(152)

Unit: inch (mm)

SHARP ELECTRONICS CORPORATION

Sharp Plaza, Mahwah, New Jersey 07430-2135

SHARP CORPORATION

Printed in Mexico Imprimé au Mexique Impreso en México Impresso no México

TINS-B707WJZZ 05P02-MX-NM

Sharp LC-20S4U Operating Manual

Specifications and Main Features

Frequently Asked Questions

User Manual

LC-20S4U

IMPORTANT INFORMATION

DEAR SHARP CUSTOMER

IMPORTANT SAFETY PRECAUTIONS

Contents

Supplied Accessories

Preparation

Installing Batteries in the Remote Control

Using the Remote Control

Antenna Connection

Power Connection

Part Names of Main Unit

Listening with Headphones

How to Fix the Cables

Part Names of Remote Control

TV Signals in Your Region

EZ SETUP (With AUTO CLOCK Setting)

EZ SETUP during the First Power On

Setting the CLOCK

AUTO CLOCK Setting

MANUAL CLOCK Setting

TIME DISPLAY

Basic Operation

Turning On and Off the Main Power

Switching the Input Modes (INPUT1/ INPUT2/INPUT3/TV)

Standby

Sound Volume

Changing Channels

Selecting Menu Items

Basic Adjustment Settings

AV MODE

BACKLIGHT

PICTURE Adjustments

COLOR TEMPERATURE

AUDIO Adjustments

Useful Features

CH-SETTING

SETUP

V-CHIP Settings

CLOSED CAPTION

VIEW MODE

AUDIO ONLY

BLUE SCREEN

SLEEP TIMER

WAKE-UP TIMER

NO SIGNAL OFF

PICTURE FLIP

NO OPERATION OFF

Connecting External Devices

Example of External Devices that can be Connected

Outputting Video and Audio (Video Output)

Connecting a VCR, DVD Player or a Camcorder to INPUT1/INPUT2/INPUT 3

Troubleshooting

Specifications

Calling for Service

LIMITED WARRANTY