Sharp LC-13E2U, LC-15E2U, LC-20E2U Service Manual

Page 1
LC-13E2U LC-15E2U/20E2U
SERVICE MANUAL
S13W6LC-13E2U
LCD COLOR TELEVISION
LC-13E2U LC-15E2U
MODELS
In the interests of user-safety (Required by safety regulations in some countries) the set should be restored to its original condition and only parts identical to those specified should be used.
OUTLINE
The above models are based on the LC-13E1U/UB/UW, LC-15E1U/UB/UW and LC-20E1U/UB/UW. Their desktop stand has been redesigned. This Service Manual covers the modifications only. For other technical data, refer to the Service Manuals for LC-13E1U/UB/UW and LC-15E1U/UB/UW (S72N2LC-13E1U) as well as for LC-20E1U and LC-20E1UB/UW (S72M5LC-20E1U).
CONTENTS
» SPECIFICATIONS ................................................................................................................................... 5
» OPERATION MANUAL ............................................................................................................................ 6
» DIMENSIONS .......................................................................................................................................... 9
» ADJUSTING PROCEDURE OF EACHSECTION ................................................................................. 12
» REPLACEMENT PARTS LIST............................................................................................................... 13
» PACKING OF THE SET ......................................................................................................................... 19
LC-20E2U
Page
SHARP CORPORATION
This document has been published to be used for after sales service only. The contents are subject to change without notice.
Page 2
LC-13E2U
2
2
LC-15E2U/20E2U
IMPORTANT SERVICE SAFETY PRECAUTION
Ë
Service work should be perfomed only by qualified ser vice technicians who are thor­oughly familiar with all safety checks and the servicing guidelines which follow:
WARNING
1. For continued safety, no modification of any circuit should be attempted.
2. Disconnect AC power before servicing.
LC-13/15E2U
CAUTION: FOR CONTINUED
PROTECTION AGAINST A RISK OF FIRE REPLACE ONLY WITH SAME
A V
TYPE F3701 (2.0A, 125V), F6500 (1.6A, 125V) AND F6501 (1.6A, 125V) FUSE.
LC-20E2U
CAUTION: FOR CONTINUED
PROTECTION AGAINST A RISK OF FIRE REPLACE ONLY WITH SAME TYPE F3701 (2.0A, 125V), F3702 (1.6A, 125V),
A V
F6700 (1.0A, 125V), F6701 (1.0A, 125V), F6702 (1.0A, 125V), F6703 (1.0A, 125V) AND F6704 (1.0A, 125V) FUSE.
BEFORE RETURNING THE RECEIVER (Fire & Shock Hazard)
Before returning the receiver to the user, perform the following safety checks:
Plug the AC cord directly into a 110~240 volt A C outlet, and connect the DC power cable into the receiver's DC jack. (Do not use an isolation transformer for this test).
Using two clip leads, connect a 1.5k ohm, 10 watt resistor paralleled by a 0.15µF capacitor in series with all exposed metal cabinet parts and a known earth ground, such as electrical conduit or electrical ground connected to an earth ground.
Use an AC voltmeter ha ving with 5000 ohm per volt, or higher, sensitivity or measure the AC voltage drop across the resisor.
Connect the resistor connection to all exposed metal parts having a return to the chassis (antenna, metal cabinet, screw heads, knobs and control shafts, escutcheon, etc.) and measure the AC voltage drop across the resistor. All checks must be repeated with the AC cord plug connection reversed. (If necessary, a nonpolarized adaptor plug must be used only for the purpose of completing these checks.) Any reading of 0.75V peak (this corresponds to 0.5 milliamp. peak A C .) or more is e xcessive and indicates a potential shock hazard which must be corrected before returning the monitor to the owner .
1. Inspect all lead dress to make certain that leads are not pinched, and check that hardware is not lodged between the chassis and other metal parts in the receiver.
2. Inspect all protective devices such as non-metallic control knobs, insulation materials, cabinet backs,
DVM
AC SCALE
1.5k ohm 10W
adjustment and compartment covers or shields, isolation resistor-capacitor networks, mechanical insulators, etc.
3. To be sure that no shock hazard exists, check for
0.15 µF
TEST PROBE
leakage current in the following manner.
TO EXPOSED METAL PARTS
234567890123456789012345678901212345678901234567890123456789012123456789012345678901234567890121
CONNECT TO KNOWN EARTH GROUND
SAFETY NOTICE
Many electrical and mechanical parts in LCD television have special safety-related characteristics. These characteristics are often not evident from visual inspection, nor can protection afforded by them be necessarily increased by using replacement components rated for higher voltage , w attage , etc. Replacement parts which have these special safety characteristics are identified in this manual; electrical
and shaded areas in the
Schematic Diagrams
For continued protection, replacement parts must be identical to those used in the original circuit. The use of a substitute replacement parts which do not have the same safety characteristics as the factory recommended replacement parts shown in this service manual, may create shock, fire or other hazards.
components having such features are identified by “ å”
234567890123456789012345678901212345678901234567890123456789012123456789012345678901234567890121
Replacement Parts Lists
.
and
2
Page 3
LC-13E2U
2
2
2
LC-15E2U/20E2U
PRECAUTIONS A PRENDRE LORS DE LA REPARATION
Ë
Ne peut effectuer la réparation qu' un technicien spécialisé qui s'est parfaitement accoutumé à toute vérification de sécurité et aux conseils suivants.
AVERTISSEMENT
Brancher le cordon d'alimentation directem-ent à une prise de courant de 110-240V. (Ne pas utiliser de
1. N'entreprendre aucune modification de tout circuit. C'est dangereux.
2. Débrancher le récepteur avant toute réparation.
LC-13/15E2U
PRECAUTION: POUR LA PROTECTION
CONTINUE CONTRE LES RISQUES D'INCENDIE, REMPLACER LE FUSIBLE
A V
P AR UN FUSIBLE DE MEME TYPE F3701 (2.0A, 125V), F6500 (1.6A, 125V), F6501(1.6A, 125V).
LC-20E2U
PRECAUTION: POUR LA PROTECTION
CONTINUE CONTRE LES RISQUES D'INCENDIE, REMPLACER LE FUSIBLE P AR UN FUSIBLE DE MEME TYPE F3701
A V
(2.0A, 125V), F3702 (1.6A, 125V), F6700(1.0A, 125V), F6701(1.0A, 125V), F6702(1.0A, 125V), F6703(1.0A, 125V), F6704(1.0A, 125V).
VERIFICATIONS CONTRE L'INCEN-DIE ET LE CHOC ELECTRIQUE
Avant de rendre le récepteur à l'utilisateur, effectuer
transformateur d'isolation pour cet essai).
A l'aide de deux fils à pinces, brancher une résistance de 1.5k 10 watts en parallèle a v ec un condensateur de 0,15µF en série avec toutes les pièces métalliques exposées du coffret et une terre connue comme une conduite électrique ou une prise de terre branchée à la terre.
Utiliser un voltmètre CA d'une sensibilité d'au moins 5000/V pour mesurer la chute de tension en travers de la résistance.
Toucher avec la sonde d'essai les pièces métalliques exposées qui présentent une voie de retour au châssis (antenne, coffret métallique, tête des vis, arbres de commande et des boutons, écusson, etc.) et mesurer la chute de tension CA en-travers de la résistance. Toutes les vérifications doivent être refaites après avoir inversé la fiche du cordon d'alimentation. (Si nécessaire, une prise d'adpatation non polarisée peut être utilisée dans le but de terminer ces vérifications.) Tous les courants mesurés ne doivent pas dépasser 0,5 mA. Dans le cas contraire, il y a une possibilité de choc électrique qui doit être supprimée avant de rendre le récepteur au client.
les vérifications suivantes.
1. Inspecter tous les faisceaux de câbles pour s'assurer que les fils ne soient pas pincés ou qu'un outil ne soit pas placé entre le châssis et les autres pièces métalliques du récepteur.
2. Inspecter tous les dispositifs de protection comme les
VTVM
ECHELLE CA
1.5k ohm 10W
boutons de commande non-métalliques, les isolants, le dos du coffret, les couvercles ou blindages de réglage et de compartiment, les réseaux de résistance-
0.15 µF
SONDE D'ESSAI
capacité, les isolateurs mécaniques, etc.
3. S'assurer qu'il n'y ait pas de danger d'électrocution en vérifiant la fuite de courant, de la facon suiv ante:
234567890123456789012345678901212345678901234567890123456789012123456789012345678901234567890121
234567890123456789012345678901212345678901234567890123456789012123456789012345678901234567890121
AUX PIECES METALLIQUES EXPOSEES
BRANCHER A UNE TERRE CONNUE
AVIS POUR LA SECURITE
De nombreuses pièces, électriques et mécaniques, dans les téléviseurs présentent des caractéristiques spéciales relatives à la sécurité, qui ne sont souvent pas évidentes à vue. Le degré de protection ne peut pas être nécessairement augmentée en utilisant des pièces de remplacement étalonnées pour haute tension, puissance, etc. Les pièces de remplacement qui présentent ces caractéristiques sont identifiées dans ce manuel; les pièces électriques qui présentent ces particularités sont
234567890123456789012345678901212345678901234567890123456789012123456789012345678901234567890121
identifiées par la marque " å " et hachurées dans la liste des pièces de remplacement et les diagrammes schématiques. Pour assurer la protection, ces pièces doivent être identiques à celles utilisées dans le circuit d'origine. L'utilisation de pièces qui n'ont pas les mêmes caractéristiques que les pièces recommandées par l'usine, indiquées dans ce manuel, peut provoquer des électrocutions, incendies, radiations X ou autres accidents.
3
Page 4
LC-13E2U LC-15E2U/20E2U
Precautions for using lead-free solder
1 Employing lead-free solder
"All PWBs" of this model employs lead-free solder . The LF symbol indicates lead-free solder , and is attached on the PWBs and service manuals. The alphabetical character following LF shows the type of lead-free solder. Example:
L Fa
Indicates lead-free solder of tin, silver and copper.
2 Using lead-free wire solder
When fixing the PWB soldered with the lead-free solder, apply lead-free wire solder. Repairing with conventional lead wire solder may cause damage or accident due to cracks. As the melting point of lead-free solder (Sn-Ag-Cu) is higher than the lead wire solder by 40ºC, we recommend you to use a dedicated soldering bit, if you are not familiar with how to obtain lead-free wire solder or soldening bit, contact our service station or service ranch in your area.
3 Soldering
As the melting point of lead-free solder (Sn-Ag-Cu) is about 220°C which is higher than the conventional lead solder by 40°C, and as it has poor solder wettabillty, you may be apt to keep the soldering bit in contact with the PWB for extended period of time. However, Since the land may be peeled off or the maximum heat-resistance temperature of parts may be excoeded, remove the bit from the PWB as soon as y ou conurm the steady soldering condition. Lead-free solder contains more tin, and the end of the soldering bit may be easily corroded. Make sure to tum on and off the power of the bit as required. if a different type of solder stays on the tip of the soldering bit, it is alloyed with lead-free solder. Clean the bit after every use of it. When the tip of the soldering bit is blackened during use, file it with steel wool or fine sandpaper.
Becareful when replacing parts with polarity indication on the PWB silk.
Lead-free wire solder for servicing
Part No, Description Code ZHNDAi123250E J φ0.3mm 250g(1roll) BL ZHNDAi126500E J φ0.6mm 500g(1roll) BK ZHNDAi12801KE J φ1.0mm 1kg(1roll) BM
4
Page 5
SPECIFICATIONS
LC-13E2U LC-15E2U/20E2U
Items
LCD panel
Number of dots 921,600 dots VGA Video color systems N358, N443, PAL, PAL-M, PAL-N, SECAM, PAL-60
Destination USA/Latin America/Taiwan TV Standard (CCIR) NTSC/PAL-M/PAL-N
TV function TV Tuning System
STEREO MTS+SAP
CATV 125 ch. Y/C FILTER 4-LINE COMB FILTER Brightness 430 cd/m Lamp life (Fluorescent lamp) 60,000 hours Viewing angles H: 170° V: 170° Audio amplifier 2.1 W × 2 Speakers 1
AV-IN1 AV-IN1, S-VIDEO-IN
AV-IN2 AV-IN2/AV-OUT Terminals COMPONENT COMPONENT-IN, AUDIO-IN
Antenna F-Type
Headphone Mini-jack for stereo (ø3.5 mm) OSD language English/French/Spanish Power supply DC 12 V, AC 110–240 V, 50/60 Hz Weight 9.3 lbs. (4.2 kg),
Accessories Remote control, Batteries (x2), Antenna cable, AC adapter,
Model
LC-13E2U LC-15E2U
13” Advanced Super View & BLACK TFT LCD
PLL 181 ch.
2
3
/16 × 2 15/
w/o accessories
AC cord, Cable clamps (x2), Operation manual
in. (3 ×
16
15” Advanced Super View & BLACK TFT LCD
7.5 cm), 2 pcs.
10.8 lbs. (4.9 kg), w/o accessories
19.7” Advanced Super View & BLACK TFT LCD
3D Y/C FILTER
2.5 W × 2
1 37/64 × 2 3/4 in. (4 × 7 cm), 2 pcs.
DC 13V, AC 110-240V, 50/60Hz
17.2 lbs. (7.8 kg), w/o accessories
LC-20E2U
Specifications are subject to change without prior notice.
5
Page 6
LC-13E2U
DISPLAY AND CONTROL OVERVIEW
Controls
CHVOL
MENU
TV/VIDEO MAIN POWER
CHVOL
MENU
TV/VIDEO MAIN POWER
TV/VIDEO, CH (
)/(
), VOL (–)/(+), and MENU on the main unit have the same functions as the same buttons
on the remote control. Basically, this operation manual provides a description based on operation with the remote
control.
The LC-13E2U, LC-15E2U and LC-20E2U have different external dimensions and the positions where the names
of the buttons are displayed also differ but the same operating procedures are followed for all three models.
MAIN POWER
TV/VIDEO
MENU
CH (
)/( )
VOL (–)/(+)
Speaker
SLEEP indicator
The SLEEP indicator lights up red when the
SLEEP TIMER is set.
Upper control panel
To change the vertical
angle of the LCD TV set,
tilt the screen up to 2.5
degrees forward or 10
degrees backward. The
TV set can also be
rotated 25 degrees
horizontally. Adjust the
angle so that the TV set
can be watched most
comfortably.
POWER indicator
A green indicator lights when the power is on and a
red indicator lights when in the standby mode (the
indicator will not light when the main power is off).
* The examples used throughout this manual are based
on the LC-20E2U model.
LC-20E2U
LC-13E2U
LC-15E2U
Remote control sensor
Y
P
B
C
O
M
P
O
N
E
N
T
P
R
L
L
R
AV
-
I
N
2
/
O
U
T
V
I
D
E
O
A
U
D
I
O
R
AUD
I
O
A
V
-IN 1 L
R
A
U
DIO
S-VIDEO
ANT
.
VIDEO
PO
W
ER
INPUT DC13V
HEAD
PHONE
V
I
D
E
O
A
U
D
I
O
L
Y
P
B
P
R
R
A
U
D
I
O
L
R
C
O
M
P
O
N
E
N
T
A
V
-
I
N
2
/
O
U
T
A
N
T
.
V
ID
E
O
S
-
V
ID
E
O
A
U
D
IO
L
R
H
E
A
D
P
H
O
N
E
P
O
W
E
R
IN
P
U
T
D
C
1
3
V
A
V
-IN
1
ANT. (Antenna terminal)
AUDIO (L)
AUDIO (R)
HEADPHONE
POWER INPUT
(DC12V: LC-13E2U
LC-15E2U
DC13V: LC-20E2U)
AUDIO (L)
AUDIO (R)
VIDEO
Y
P
R
P
B
AV-IN2/OUT
COMPONENT
AUDIO (L)
AUDIO (R)
VIDEO
S-VIDEO
AV-IN1
Carrying handle
Terminals
Hold the carrying handle and tilt the
screen while steadying the stand with
your other hand.
» Adjusting the screen view angle
LC-15E2U/20E2U
OPERATION MANUAL
6
Page 7
Listening with Headphones
DISPLAY AND CONTROL OVERVIEW (Continued)
Ë
Ë
Ë
Before connecting cables and cords to the rear terminals, remove the
back covers. Push in the tabs and pull out the back covers carefully.
To mount the cover, insert the 2 hooks on the bottom of the cover
into the cabinet and press on the upper part of the back cover until
the tab locks in place with a click.
Removing the Back Cover
Plug the headphone mini-plug into the HEADPHONE jack located on the rear of the TV set.
Headphones
Headphones are not included in the supplied accessories.
No sound will be heard from the main unit speakers when a headphone mini-plug is connected into the
HEADPHONE jack.
\Rear terminal
A
V
-
I
N
1
L
R
A
U
D
I
O
S
-
V
I
D
E
O
A
N
T
. V
I
D
E
O
P
O
W
E
R
I
N
P
U
T
D
C
1
3
V
H
E
A
D
P
H
O
N
E
Y
P
B
C
OM
P
O
N
E
N
T
P
R
L
L
R
A
V
-
I
N
2
/
O
U
T
V
ID
E
O
A
U
D
IO
R
A
U
D
I
O
AV
-
I
N
1
L
R
A
U
DI
O
S
-
V
I
D
E
O
A
N
T
. V
I
D
E
O
P
O
W
E
R
I
N
P
U
T
D
C
1
3
V
H
E
A
D
P
H
O
N
E
" On-screen display
20
VOLUME
Adjust the sound volume
using VOL (+)/(–) on the
remote control.
CHVOL
POWER
MENU
DISPLAY
MUTE
SLEEP PIC. FLIP
BRIGHT CC TV/VIDEO
FLASHBACK
REMOTE CONTROL
MENU/
'/"/\ /|
(Cursor control)
TV/VIDEO
POWER
DISPLAY*
1
SLEEP
BRIGHT
VOL(+)/(–)
MTS*
3
PIC. FLIP
FLASHBACK*
2
CH (
)/( )
Channel Select
*
1
Displays the receiving chan-
nel for 10 seconds.
*
2
Returns to the previous
channel.
*
3
Selects audio settings.
CC (CLOSED
CAPTION)
MUTE
LC-13E2U LC-15E2U/20E2U
7
Page 8
LC-13E2U
CONNECTING WITH EXTERNAL DEVICES
You can enjoy picture and sound by connecting a VCR or a home video game system to the terminals
located on the rear of the TV set.
When connecting an external device, turn off the power of the main unit first to prevent any possible
damage.
<Example>
Video camera
Home video game system
External devices that can be connected
to COMPONENT terminal
PC connection is not possible.
For the cable, use a commercially available audio/video cable.
Only connect audio/video signals to AV-IN1 and 2 terminals. Connecting other signals may result in a malfunction.
AV-IN1 has 2 video input terminals: VIDEO and S-VIDEO. When you connect external devices to both terminals
(and if you select AV-IN1), you can only view pictures from the S-VIDEO terminal. To view the picture from the
VIDEO terminal, do not connect any external device to the S-VIDEO terminal.
For more information about external device connections, see the manuals of your external devices.
Y
P
B
C
O
M
P
O
N
E
N
T
P
R
L
L
R
A
V
-
I
N
2
/
O
U
T
V
I
D
E
O
A
U
D
I
O
R
A
U
D
I
O
A
V
-
I
N
1
L
R
A
U
D
I
O
S
-
V
I
D
E
O
A
N
T
.
V
I
D
E
O
P
O
WE
R
I
N
P
U
T
D
C
1
3
V
H
E
A
D
P
H
O
N
E
Example of external devices that can be connected
External devices that can be connected
to AV-IN2 terminal
* If your external device has a component
terminal, COMPONENT connection is
recommended (you can view high-quality
pictures).
<Example>
DVD Player, etc.
<Example>
VCR
Laser disc player
* If your external device has an S-Video terminal,
S-VIDEO connection is recommended.
External devices that can be connected
to AV-IN1 terminal
M
ENU
SLEEP T I
M
ER
VIDEO ADJUST
PRESE T
CLOSED CAPT ION
V–CHI P BLOCK
SET UP
SELECT :
ENTER:
EXIT:
MENU
SLEEP T I
M
ER
SELECT :
ADJU ST :
EXIT:
MENU
RETURN
SLEEP T I
M
ER [–– – RE
M
AIN]
PICTURE [ 30]
TINT
COLOR
BLACK LEVEL
SHARPNESS
SELECT :
ENTER:
EXIT:
MENU
VI DEO ADJUST( TV)
RETURN
[ 0]
[ 0]
[ 0]
[ 0]
BRI GHTNESS [BR I GHT ]
AUTO PO
W
ER OFF
PICTURE FLIP
AV2 IN/OUT
SELECT :
EXIT:
MENU
RETURN
[OFF ]
[NOR
M
AL ]
[IN ]
PRESE T
ADJU ST :
CC/ T EXT
[OFF]
SELECT :
EXIT:
MENU
RETURN
ADJU ST :
CLOSED CAPT ION
INPUT SECRET NO.
– – – –
EXIT:
MENU
BLUE SCREEN [ OFF]
LANGUAGE
SELECT :
EXIT:
MENU
RETURN
ADJU ST :
SET UP
CH–SE TT I NG
COLOR SYST EM
RESET
[ N358]
SELECTING MENU ITEMS
This LCD TV set allows you to adjust the various settings using the menu screen. Select the desired
menu item by following the steps below and then refer to the indicated page for details.
1
Press MENU to display the MENU
screen.
2
Press '/
"
to select the desired
menu item.
3
Press
\
/
|
to enter.
4
Press MENU to exit.
The TINT display only appears when
the color system is set to N358 or
N443.
The displayed items differ depending
on the setting conditions.
The selected item changes to yellow.
Items in magenta cannot be se-
lected.
TV mode
This product is factory set to comply
with the color system in the United
States (NTSC-N358). For Brazil
(PAL-M), Argentina (PAL-N) and
Uruguay (PAL-N), set the color
system before using this product.
To return to the previous screen,
select RETURN.
You can adjust some settings with
the special buttons: SLEEP,
BRIGHT, PIC. FLIP and CC
Ë LC-13E2U/LC-15E2U
COLOR SYSTEM
When you set COLOR SYSTEM to
AUTO, the AUTO mode
automatically detects the receiving
signal system and adjusts the
reception system of the TV set.
When the picture or sound is not
stable, set a specific COLOR
SYSTEM (not AUTO). The picture
and sound may be improved.
Selecting Menu Items
CHVOL
P
O
W
E
R
MENU
DISPLAY
MUTE
SLEEP PIC. FLIP
BRIGHT CC TV/VIDEO
FLASHBACK
* The screen indications shown above are larger than actual for easy reading.
MENU/
/
/
/
LC-15E2U/20E2U
8
Page 9
ËLC-13E2U
DIMENSIONS
81/
16
(205)
LC-13E2U LC-15E2U/20E2U
Unit: inch (mm)
221/
VOL CH MENU TV/VIDEO MAIN POWER
(59)12
64
/
21
2
91/8 (232)
1317/
64
16
(97)
64
(59)
(366)
32
/
13
14
(372)
64
/
41
14
(337)313/
(320)
32
/
19
(180)
64
/
POWER SLEEP
5
7
(5)
16
/
3
0
(203)
8
VIDEO
AV-IN 2/OUT
AUDIO
COMPONENT
AUDIO
315/
16
(100)
VIDEO
AV-IN 1 L
AUDIO
R
L
R
Y
P
B
P
R
L
R
S-VIDEO
HEAD PHONE
ANT.
POWER INPUT DC12V
(100)
16
/
15
3
(33)
64
/
19
1
9
Page 10
LC-13E2U LC-15E2U/20E2U
ËLC-15E2U
221/
81/
Unit: inch (mm)
16
(205)
VOL CH MENU TV/VIDEO MAIN POWER
91/8 (232)
1459/
64
16
(97)
64
(59)
(365)
64
/
23
14
(384)
64
/
7
15
(379)313/
(59)13
64
/
21
2
(352)
64
/
55
8
(203)
AV-IN 2/OUT
COMPONENT
(198)
64
/
POWER SLEEP
315/
16
(100)
VIDEO
AV-IN 1
L
AUDIO
VIDEO
L
AUDIO
R
Y
P
B
P
R
L
AUDIO
R
R
S-VIDEO
HEAD PHONE
ANT.
POWER INPUT DC12V
51
7
(5)
16
/
3
0
(100)
16
/
15
3
(35.2)
8
/
3
1
10
Page 11
LC-13E2U LC-15E2U/20E2U
ËLC-20E2U
243/64 (68)
949/64 (248)
VOL CH MENU TV/VIDEO MAIN POWER
119/64 (283)
1913/32 (493)43/64 (103)
Unit: inch (mm)
/64 (68)17
43
2
21
/32 (220)
8
/64 (472)
37
18
/64 (476)
47
18
AV-IN 2/OUT
COMPONENT
/64 (440)
21
/64 (244)0
POWER SLEEP
39
9
/16 (5)
3
315/16 (100)
VIDEO
AV-IN 1 L
AUDIO
VIDEO
L
AUDIO
R
Y
P
B
P
R
L
AUDIO
R
R
S-VIDEO
HEAD
PHONE
ANT.
POWER
INPUT
DC13V
/16 (100)
15
3
/64 (51.5)
1
2
11
Page 12
LC-13E2U LC-15E2U/20E2U
ADJUSTING PROCEDURE OF EACH SECTION
Change the initial settings of the following items on the LC-13/15/20E1U adjustment process mode menus.
Page Item Initial Setting
10 N358 AVO START Change from 152 to “156”.
N358 SCIN1 Change from 1623 to “1601”.
11 N443 AVO START Change from 152 to “156”.
N443 SCIN1 Change from 1623 to “1601”.
12 PAL AVO START Change from 152 to “156”.
PAL SCIN1 Change from 1623 to “1601”.
13 SECAM AVO START Change from “152” to “156”.
SECAM SCIN1 Change from 1623 to “1601”.
14 PAL-M AVO START Change from “152” to 156”.
PAL-M SCIN1 Change from 1623 to “1601”.
15 PAL-N AVO START Change from 152 to “156”.
PAL-N SCIN1 Change from 1623 to “1601”.
16 PAL60 AVO START Change from “152” to 156”.
PAL60 SCIN1 Change from 1623 to 1601”.
12
Page 13
LC-13E2U LC-15E2U/20E2U
Ref. No. Part No. Description Code Ref. No. Part No. Description Code
PARTS LIST
PARTS REPLACEMENT
Replacement parts which have these special safety characteristics identified in this manual; electrical components having such f eatures are identified by and Schematic Diagrams. The use of a substitute replacement part which dose no have the same safety characteristic as the factory recommended replacement parts shown in this service manual may create shock, fire or other hazards.
"HOW TO ORDER REPLACEMENT PARTS"
To have your order filled promptly and correctly, please fur nish the following informations.
1. MODEL NUMBER 2. REF. NO .
3. PART NO. 4. DESCRIPTION
in USA: Contact your nearest SHARP Parts Distributor to order.
Ref. No. Part No. Description Code
CABINET AND MECHANICAL PARTS
1 CCABAA092WJ01 J Cabinet A Ass’y BG 1-1 1-2 GCOVA2020CEZZ J R/C, LED Cover AF 1-3 1-4 PSPAGA031WJZZ J Spacer, x4 AA 1-5 PSPAGA033WJZZ J Spacer, x4 AA 1-6 PSPAH0719CEZZ J Spacer, x2 AC 1-7 PSPAH0606CEZZ J Spacer, x2 AD 1-9 PSPAHA073WJZZ J Spacer, x2 AB 1-10 QEARZ0047CEZZ J Grounding Part AC 1-11 VSP7530PB588B J Speaker(L) AS 1-12 VSP7530PB598B J Speaker(R) AS 1-13 XEBSD30P08000 J Screw, x6 AA 1-15 PSPAH0623CEZZ J Spacer, x1 AB
2 CCABBA058WJ11 J Cabinet B Ass’y BA 2-1 2-2 GLEGGA009WJSA J Leg, x2 AG 2-3 HiNDPA365WJSA J Model Label AG 2-4 LANGTA013WJFW J Reinforcement Angle AL 2-5 PSPAGA043WJZZ J Spacer, x2 AC 2-6 XEBSD30P08000 J Screw, x1 AA
3 CDAi-A031WJ01 J Stand Ass’y BN 3-1 GDAi-A031WJSA J Stand Base AX 3-2 3-3 GCOVA1945CESA J Stand Grip AK 3-4 JHNDP0105CESA J 3-5 PSPAZ0415CEZZ J Spacer, x2 AB 3-6 XESSN40P10000 J Screw, x8 AB 3-7 LX-NZ3185CEFE J Nut, x1 AC 3-8 MHNG-3051CEFW J Swivel Hinge AV 3-9 LANGG1196CEFW J Swivel Base AF 3-10 LANGG1198CEFW J Fixing Metal, Spacer-A AE 3-11 LANGG1199CEFW J Fixing Metal, Spacer-B AD 3-12 XUSSD40P20000 J Screw, x4 AB 3-13 XESSE40P14000 J Screw, x4 AA 3-14 GLEGG9093CEZZ J Leg Cushion, x8 AC
å and shaded areas in the Replacement Parts Lists
For location of SHARP Parts Distributor, Please call Toll­Free; 1-800-BE-SHARP
MARK: SPARE PARTS-DELIVERY SECTION
MODEL : LC-13E2U
Not Available Not Available
Not Available
Not Available
– Cabinet A — – "SHARP" Badge
– Cabinet B
Stand Joint Stand Handle
AW
LISTE DES PIECES
CHANGE DES PIECES
Les pi`eces de rechange qui pr élelesentent ces caract éleristiques sp éleciales de s élecurit éle, sont identifi élees dans ce manuel : les pi`eces élelectriques qui pr élesentent ces particularit éles, sont rep éler élee par la marque å et sont hachur élees dans les listes de pi`eces et dans les diagrammes sch élematiques. La substitution d'une pi`ece de rechange par une autre qui ne pr éLesente pas les m éoemes caract éLeristiques de s élecurit éle que la pi`ece recommand élee parl'usine et dans ce manuel de service, peut provoquer une éLelectrocution, un incendie ou toutautre sinistre.
"COMMENT COMMANDER LES PIECES DE RECHANGE"
Pour que votre commande soit r apidement et correctement remplie , veuillez fournir les renseignements suivants.
1. NUMERO DU MODELE 2. NO. DE REF
3. NO. DE PIECE 4. DESCRIPTION
in CANADA: Contact SHARP Electronics of Canada Limited
MARQUE: SECTION LIVRAISON DES PIECES DE RECHANGE
Ref. No. Part No. Description Code
4 CCOVAA127WJ01 J Top Cover Ass’y AR 4-1 4-2 GCOVA1943CEKA J Button Cover(VOL) AD 4-3 GCOVA1943CEKB J Button Cover(CH) AD 4-4 JBTN-2076CEKA J Operation Button AE 4-5 JBTN-A012WJKA J Power Button AE 4-6 LHLDZA027WJKZ J Power Button Holder AE 4-7 MSPRCA014WJFW J Power Button Spring AB 4-8 XEBSD30P08000 J Screw, x2 AA
5 5-1 RLCDTA012WJZZ J 13" LCD Panel Unit CV
å 5-2 KLMP-0120CEZZ J Lamp Unit BD
5-3 PGiDM0069CEZZ J Light Guide Panel AZ 5-4 PMiR-0292CEZZ J Reflection Mirror, x2 AG 5-5 PMiR-0293CEZZ J Reflection Mirror, x2 AF 5-6 PSHEP0276CEZZ J Reflection/Deflection Sheet BB 5-7 PSHEP0277CEZZ J Prism Sheet AV 5-8 PSHEP0278CEZZ J Diffusion Sheet AL 5-9 PSHEP0279CEZZ J Reflection Sheet-1 AG 5-10 PSHEP0280CEZZ J Reflection Sheet-2 AG 5-11 PSHEP0306CEZZ J Lamp Reflection Sheet AC
5-12 PSLDMA024WJFW J Back Shield Panel AP 5-13 QCNW-6064CEZZ J Connecting Cord AD 5-14 QCNW-6065CEZZ J Connecting Cord AC 5-15 QCNW-6066CEZZ J Connecting Cord AE 5-16 XBBSD30P05000 J Screw, x2 AA
6 GCOVAA129WJKA J Chassis Frame AP 7 GCOVA2103CEKA J Chassis Frame Cover AG 8 GCOVAA078WJKA J Terminal Cover(L) AL 9 GCOVAA079WJKA J Terminal Cover(S) AH 10 11 QCNW-6068CEZZ J Connecting Cord AD 12 QCNW-A699WJZZ J Connecting Cord AE 13 QCNW-A267WJZZ J Connecting Cord AK 14 LX-BZ3442CEFF J Screw, x4 AB 15 XBBSF30P05000 J Screw, x2 AB 16 XBPSN30P09JS0 J Screw, x3 AB 17 XEBSD30P06000 J Screw, x1 AA 18 XEBSD30P08000 J Screw, x10 AA 19 XEBSD30P12000 J Screw, x2 AA 20 XEBSF30P20000 J Screw, x6 AB
Phone (416) 890-2100
Not Available
Not Available
Not Available
– Top Cover
– 13" LCD Panel Unit Ass’y
(Cover), x2
– Serial No. Label
13
Page 14
LC-13E2U LC-15E2U/20E2U
Ref. No. Part No. Description Code Ref. No. Part No. Description Code
CABINET AND MECHANICAL PARTS
MODEL : LC-15E2U
1 CCABAA090WJ01 J Cabinet A Ass’y BG 1-1 1-2 GCOVA2020CEZZ J R/C LED Cover AF 1-3 1-4 PSPAGA034WJZZ J Spacer, x4 AB 1-5 PSPAGA035WJZZ J Spacer, x4 AB 1-6 PSPAHA050WJZZ J Spacer, x2 AC 1-7 PSPAHA051WJZZ J Spacer, x2 AC 1-8 PSPAHA073WJZZ J Spacer, x1 AB 1-10 QEARZ0047CEZZ J Grounding Strap AC 1-11 VSP7530PB588B J Speaker(L) AS 1-12 VSP7530PB598B J Speaker(R) AS 1-13 XEBSD30P08000 J Screw, x6 AA 1-14 XEBSD30P08000 J Screw, x2 AA
2 CCABBA056WJ11 J Cabinet B Ass’y BB 2-1 2-2 GLEGGA008WJSA J Leg, x2 AF 2-3 HiNDPA374WJSA J Model Label AG 2-4 LANGT9061CEFW J Reinforcement Angle BD 2-5 PSPAGA043WJZZ J Spacer, x2 AC 2-6 XEBSD30P08000 J Screw, x1 AA 2-7 PMLT-A039WJZZ J Spacer, x4 2-8 PSPAHA060WJKZ J Spacer, x1 AB
3 CDAi-A031WJ01 J Stand Ass’y BN 3-1 GDAi-A031WJSA J Stand Base AX 3-2 3-3 GCOVA1945CESA J Stand Grip AK 3-4 JHNDP0105CESA J Stand Handle AW 3-5 PSPAZ0415CEZZ J Spacer, x2 AB 3-6 XESSN40P10000 J Screw, x8 AB 3-7 LX-NZ3185CEFE J Nut, x1 AC 3-8 MHNG-3051CEFW J Swivel Hinge AV 3-9 LANGG1196CEFW J Swivel Base AF 3-10 LANGG1198CEFW J Fixing Metal, Spacer-A AE 3-11 LANGG1199CEFW J Fixing Metal, Spacer-B AD 3-12 XUSSD40P20000 J Screw, x4 AB 3-13 XESSE40P14000 J Screw, x4 AA 3-14 GLEGG9093CEZZ J Leg Cushion, x8 AC
Not Available Not Available
Not Available
Not Available
– Cabinet A — – "SHARP" Badge
– Cabinet B
– Stand Joint
6 GCOVA2105CEKA J Chassis Frame AP 7 GCOVA2103CEKA J Chassis Frame Cover AG 8 GCOVAA083WJKA J Terminal Cover(L) AK 9 GCOVAA082WJKA J Terminal Cover(S) AH 10 11 QCNW-A070WJZZ J Connecting Cord AD 12 QCNW-A699WJZZ J Connecting Cord AE 13 QCNW-A267WJZZ J Connecting Cord AK 14 LX-BZ3442CEFF J Screw, x4 AB 15 XBBSF30P05000 J Screw, x2 AB 16 XBPSN30P09JS0 J Screw, x3 AB 17 XEBSD30P06000 J Screw, x1 AA 18 XEBSD30P08000 J Screw, x10 AA 19 XEBSD30P12000 J Screw, x2 AA 20 XEBSF30P20000 J Screw, x6 AB 21 XEBSD30P06000 J Screw, x1 AA 22 PSPAHA077WJZZ J Spacer, x3 AB
Not Available
Serial No. Label
4 CCOVAA127WJ01 J Top Cover Ass’y AR 4-1 4-2 GCOVA1943CEKA J Button Cover(VOL) AD 4-3 GCOVA1943CEKB J Button Cover(CH) AD 4-4 JBTN-2076CEKA J Operation Button AE 4-5 JBTN-A012WJKA J Power Button AE 4-6 LHLDZA027WJKZ J Power Button Holder AE 4-7 MSPRCA014WJFW J Power Button Spring AB 4-8 XEBSD30P08000 J Screw, x2 AA
5 5-1 RLCDTA013WJZZ J 15" LCD Panel Unit DB
å 5-2 KLMP-0122CEZZ J Lamp Unit BD
5-3 PGiDM0070CEZZ J Light Guide Panel BA 5-4 PMiR-0294CEZZ J Reflection Mirror, x2 AG 5-5 PMiR-0295CEZZ J Reflection Mirror, x2 AF 5-6 PSHEP0281CEZZ J Reflection/Deflection Sheet BE 5-7 PSHEP0282CEZZ J Prism Sheet AY 5-8 PSHEP0283CEZZ J Diffusion Sheet AL 5-9 PSHEP0284CEZZ J Reflection Sheet-1 AG 5-10 PSHEP0285CEZZ J Reflection Sheet-2 AG 5-11 PSHEP0307CEZZ J Lamp Reflectin Sheet AC
5-12 PSLDM4689CEFW J Back Shield Panel AR 5-13 QCNW-6064CEZZ J Connecting Cord AD 5-14 QCNW-6065CEZZ J Connecting Cord AC 5-15 QCNW-A069WJZZ J Connecting Cord AF 5-16 XBBSD30P05000 J Screw, x2 AA 5-17 XBBSD30P05000 J Screw, x2 AA
Not Available
Not Available
– Top Cover
– 15" LCD Panel Unit Ass’y
(Cover), x2
14
Page 15
CABINET AND MECHANICAL PARTS (LC-13/15E2U)
LC-13E2U LC-15E2U/20E2U
H
G
F
E
4
COTROL PWB
1-3
1-1
4-2 4-3
4-4
18
1-10
4-8
1-15
1-2
4-1
1-5
1-6
K
1-9
1-4
1-8
4-5
1-5
4-6
G
4-7
1-11
1-4
18
1-14
1-7
1-4
1-5
1-9
1-4
1-5
1-13
H
1-12
I
R/C,LED PWB
1-13
1-14
K
D
12
INVERTER PWB
5-5
18
5-4
7
5-12
22
6
18
DIGITAL PWB
C
11
F
22
C
H
16
D
16
I
16
21
L
F
13
ANALOG PWB
18
17
1
5-2
D
5
5-1
5-14
5-13
5-17
C
B
5-16
B
A
5-16
5-17
L
5-15
2-8
2-6
5-6
5-8
5-7
8
2
2-7
2-4
A
2-5
2-2
2-5
5-3 5-11
20
20
G
2-2
5-11
5-9
2-1
5-10
5-4
2-3
5-5
19
3
10
3-6
15
9
20
3-7
3-5
3-8
3-12
3-14
3-3
14
3-4
3-2
3-11
3-13
3-9
3-10
3-1
654321
15
Page 16
LC-13E2U LC-15E2U/20E2U
Ref. No. Part No. Description Code Ref. No. Part No. Description Code
CABINET AND MECHANICAL PARTS
MODEL : LC-20E2U
1 CCABAA072WJ01 J Cabinet A Ass'y BG 1-1 1-2 GCOVA2020CEZZ J R/C LED Cover AF 1-3 1-4 PSPAGA027WJZZ J Spacer, x2 AC 1-5 PSPAGA028WJZZ J Spacer, x2 AB 1-6 PSPAGA029WJZZ J Spacer, x2 AB 1-7 PSPAGA030WJZZ J Spacer, x4 AB 1-8 PSPAHA040WJZZ J Spacer, x2 AD 1-9 PSPAHA041WJZZ J Spacer, x2 AD 1-10 PSPAH0678CEZZ J Spacer, x2 AA 1-11 QCNW-A543WJZZ Connecting Cord AE 1-12 VSP7040PB578S J Speaker, x2 AR 1-13 XETSD40P12000 J Screw, x8 AB
2 CCABBA040WJ10 J Cabinet B Ass'y BC 2-1 2-2 GLEGGA007WJSA J Leg, x2 AG 2-3 HiNDPA370WJSA J Model Label AG 2-4 PSPAGA043WJZZ J Spacer, x2 AC
3 CDAi-A030WJ01 J Stand Ass’y BQ 3-1 GDAi-A030WJSA J Stand Base BB 3-2 3-3 GCOVA1945CESA J Stand Grip AK 3-4 JHNDP0103CESA J Stand Handle AX 3-5 PSPAZ0415CEZZ J Spacer, x2 AB 3-6 XESSN40P10000 J Screw, x8 AB 3-7 LX-NZA001WJFE J Nut, x1 AD 3-8 MHNG-A004WJFW J Swivel Hinge AU 3-9 LANGGA004WJFW J Fixing Metal AE 3-10 LANGFA007WJFW J Spacer for Swivel Hinge AD 3-11 XUSSD40P20000 J Screw, x4 AB 3-12 XESSE40P14000 J Screw, x4 AA 3-13 GLEGG9093CEZZ J Leg Cushion, x8 AC
Not Available Not Available
Not Available
Not Available
– Cabinet A — – "SHARP" Badge
– Cabinet B
– Stand Joint
9 GCOVAA070WJKA J Terminal Cover(L) AK 10 LANGT9032CEFW J Reinforcement Angle AR 11 QCNW-A695WJZZ J Connecting Cord AG 12 QCNW-6058CEZZ J Connecting Cord AE 13 PMLT-0404CEZZ J Spacer, x1 AD 14 PMLT-0405CEZZ J Spacer, x1 AD 15 16 LX-BZ3442CEFF J Screw, x4 AB 17 QCNW-A267WJZZ J Connecting Cord AK 18 XBBSD40P06000 J Screw, x4 AA 19 XBBSF30P06000 J Screw, x2 AA 20 XBPSD30P10JS0 J Screw, x8 AA 21 XEBSD30P08000 J Screw, x1 AA 22 XEBSD30P12000 J Screw, x6 AA 23 XEBSF40P12000 J Screw, x1 AB 24 XEBSF40P20000 J Screw, x9 AB
Not Available
– Serial No. Label
4 CCOVAA084WJ01 J Top Cover Ass'y AR 4-1 4-2 GCOVA1943CEKA J Button Cover(VOL) AD 4-3 GCOVA1943CEKB J Button Cover(CH) AD 4-4 JBTN-A012WJKA J Operation Button AE 4-5 JBTN-2076CEKA J Power Button AE 4-6 LHLDZA027WJKZ J Power Button Holder AE 4-7 MSPRCA014WJFW J Power Button Spring AB 4-8 XEBSD30P08000 J Screw, x2 AA
5 5-1 RLCDTA014WJZZ J 20" LCD Panel Unit DT 5-2 LHLDW1173CEZZ J Wire Holder, x1 AD 5-3 PMLT-0402CEZZ J Spacer, x1 AC 5-4 PSLDM4685CEFW J Back Shield Panel AX
å 5-5 KLMP-0124CEZZ J Lamp Unit-A BH å 5-6 KLMP-0125CEZZ J Lamp Unit-B BD
5-7 LHLDZ2176CEZZ J Lamp Fixing Holder, x2 AL 5-8 MSPRP1220CEFW J ITO Earth Spring AC 5-9 PCOVU0107CEZZ J Diffusion Plate AY 5-10 PMiR-0296CEZZ J Reflection Mirror AX 5-11 PMLT-0377CEZZ J Spacer AD 5-12 PSHEP0286CEZZ J Reflection/Deflection Sheet BP 5-13 PSHEP0287CEZZ J Prism Sheet BC 5-14 PSHEP0288CEZZ J Diffusion Sheet AQ 5-15 PSHEP0289CEZZ J ITO Sheet AY 5-16 QCNW-6054CEZZ J Connecting Cord AD 5-17 QCNW-6055CEZZ J Connecting Cord AD 5-18 QCNW-6056CEZZ J Connecting Cord AF 5-19 XBBSD30P08000 J Screw, x10 AA 5-20 XEBSD20P05000 J Screw, x6 AA 5-21 XEBSD30P08000 J Screw, x1 AA
Not Available
Not Available
– Top Cover
– 20" LCD Panel Unit Ass'y
6 GCOVA2106CEKA J Chassis Frame AU 7 GCOVA2103CEKA J Chassis Frame Cover AG 8 GCOVAA069WJKA J Terminal Cover(S) AL
16
Page 17
CABINET AND MECHANICAL PARTS (LC-20E2U)
H
LC-13E2U LC-15E2U/20E2U
1-6
1-7
1-10
K
1-8
1-5
4-5
1-4
1-6
1-4
4-7 4-6
1-12
1-7
1-6
G
22
10
Inverter-A PWB
20
1-6
1-7
1-9
1-8
L
1-6
1-5
1-6
1-7
H
1-13
1-11
L
1-12
5-10
1-13
5-20
B
K
D
11
22
R/C, LED PWB
6
13
7
B
5-4
Inverter-B PWB
5-11
5-2
5-3
20
14
4-1
4-2
4
4-3
4-4
G
Control PWB
4-8
22
F
1-2
1-3
1-1
E
1
5
5-7
Digital PWB
12
17
H
Analog PWB
18
I J
D
21
20
C
20
D
5-12
A
5-1
5-17
B
C
5-19
5-16
5-19
5-9
5-19
5-15
5-21
9
5-19
5-8
2
I
J
B
A
5-18
5-13
5-14
C
5-5
5-6
5-7
A
5-20
3
24
23
2-3
15
19
8
3-6
3-5
3-8
3-11
3-3
16
3-4
3-2
3-10
3-12
3-9
3-1
B
2-1
24
3-7
3-13
2-4
2-2
2-4
2-2
G
A
654321
17
Page 18
LC-13E2U LC-15E2U/20E2U
Ref. No. Part No. Description Code Ref. No. Part No. Description Code
SERVICE JIGS
SUPPLIED ACCESSORIES
(USE FOR SERVICING)
å QACCD3097CEPA J AC Cord AQ
LHLDWA002WJSA J Cable Clamp, x1 AD QCNWG0003CEPA J Antenna Cable AM
RRMCGA077WJSA J Infrared R/C Unit AT TiNS-A652WJZZ J Operation Manual AR
å UADP-A009WJPZ J AC Adapter(LC-13/15E2U) BG å UADP-0243CEPZ J AC Adapter(LC-20E2U) BL
QCNW-A323WJZZ J Extention Cable, 5-pin AD
LC-13/15E2U
(P2004-P3702)
QCNW-A324WJZZ J Extention Cable, 50-pin AE
(SC2001-SC3100)
QCNW-A553WJZZ J Extention Cable, 30-pin BA
(SC1203-LCD)
QCNW-A555WJZZ J Extention Cable, 20-pin AU
(SC1201-LCD)
QCNW-A556WJZZ J Extention Cable, 50-pin AU
(SC1202-LCD)
LC-20E2U
QCNW-A552WJZZ J Extention Cable 5-pin AG
(P2004-P3702)
QCNW-A553WJZZ J Extention Cable 30-pin BA
(SC1203-LCD)
QCNW-A555WJZZ J Extention Cable 20-pin AU
(SC1201-LCD)
QCNW-A556WJZZ J Extention Cable 50-pin, x2 AU
(SC2001-SC3403) (SC1202-LCD)
PACKING PARTS
(NOT REPLACEMENT ITEM)
SPAKCA569WJZZ – Packing Case — SPAKFA269WJZZ – Buffer Material (Accessories) — SPAKPA138WJZZ – Wrapping Paper — SPAKXA128WJZZ – Buffer Material — SSAKA0160CEZZ – Polyethylene Bag — TLABK0001TAZZ – No. Label
SPAKCA568WJZZ – Packing Case — SPAKFA268WJZZ – Buffer Material (Accessories) — SPAKPA139WJZZ – Wrapping Paper — SPAKXA132WJZZ – Buffer Material — SSAKA0160CEZZ – Polyethylene Bag — TLABK0001TAZZ – No. Label
SPAKCA567WJZZ – Packing Case — SPAKFA267WJZZ – Buffer Material (Accessories) — SPAKPA140WJZZ – Wrapping Paper — SPAKXA252WJZZ – Buffer Material — SSAKA0160CEZZ – Polyethylene Bag — TLABK0001TAZZ – No. Label
LC-13E2U
LC-15E2U
LC-20E2U
18
Page 19
PACKING OF THE SET
Operation Manual
(TiNS-A652WJZZ)
Cable Clamp
(LHLDWA002WJSA)
"AAA" size Battery (2pcs)
Wrapping Paper
(SPAKPA140WJZZ)
Buffer Material
(SPAKXA252WJZZ)
Buffer Material
(SPAKXA252WJZZ)
Packing Case
(SPAKCA567WJZZ)
Polyethylene Bag
(SSAKA0160CEZZ)
Buffer Material (Accessories)
(SPAKFA267WJZZ)
Not Replacement Item
MODEL:LC-20E2U
No. Label
(TLABK0001TAZZ)
L
R
AC Adapter
(UADP-0243CEPZ)
Antenna Cable
(QCNWG0003CEPA)
AC Cord
(QACCD3097CEPA)
Infrared R/C Unit
(RRMCGA077WJSA)
Operation Manual
(TiNS-A652WJZZ)
Cable Clamp
(LHLDWA002WJSA)
"AAA" size Battery (2pcs)
Wrapping Paper
(SPAKPA138WJZZ:LC-13E2U)
(SPAKPA139WJZZ:LC-15E2U)
Buffer Material
(SPAKXA128WJZZ:LC-13E2U)
(SPAKXA132WJZZ:LC-15E2U)
Buffer Material
(SPAKXA128WJZZ:LC-13E2U)
(SPAKXA132WJZZ:LC-15E2U)
Packing Case
(SPAKCA569WJZZ:LC-13E2U)
(SPAKCA568WJZZ:LC-15E2U)
Buffer Material (Accessories)
(SPAKFA269WJZZ:LC-13E2U)
(SPAKFA268WJZZ:LC-15E2U)
AC Adapter
(UADP-A009WJPZ)
Antenna Cable
(QCNWG0003CEPA)
AC Cord
(QACCD3097CEPZ)
Infrared R/C Unit
(RRMCGA077WJSA)
L
R
Not Replacement Item
MODELS:LC-13/15E2U
No. Label
(TLABK0001TAZZ)
Polyethylene Bag
(SSAKA0160CEZZ)
LC-13E2U LC-15E2U/20E2U
19
Page 20
LC-13E2U LC-15E2U/20E2U
COPYRIGHT © 2003 BY SHARP CORPORATION
ALL RIGHTS RESERVED.
No part of this publication may be reproduced, stored in a retrieval system, or transmitted in any form or by any means, electronic, mechanical, photocopying, recording, or otherwise, without prior written permission of the publisher.
TQ1507-S
Mar. 2003 Printed in Japan
Design and Production Information Design : Japan Production : Japan
MI. KG
SHARP CORPORATION AV Systems Group Quality & Reliability Control Center Yaita, Tochigi 329-2193, Japan
Loading...