Sharp LC-20DV20U Installation Manual

LC-20DV20U

COMBINATION LIQUID CRYSTAL TELEVISION AND DVD/CD PLAYER COMBINÉ TÉLÉVISEUR ACL ET LECTEUR DVD/CD COMBINACION TELEVISOR CON PANTALLA DE CRISTAL LÍQUIDO CON DVD/DISCOS COMPACTOS

OPERATION MANUAL MODE D’EMPLOI MANUAL DE OPERACIÓN

ENGLISHFRANÇAISESPAÑOL

Products that have earned the ENERGY STAR® are designed to protect the environment through superior energy efﬁ ciency. Les produits agréés ENERGY STAR énergétique supérieur. Los productos que han ganado la marca ENERGY STAR ambiente mediante una eﬁ ciencia superior en el uso de la energía.

sont conçus pour protéger l’environnement par un rendement

han sido diseñados para proteger el medio

LC-20DV20U

COMBINATION LIQUID CRYSTAL TELEVISION

AND DVD/CD PLAYER

ENGLISH

OPERATION MANUAL

• The illustrations and on-screen displays in this operation manual are for explanation purposes and may vary slightly from the actual operations.

• Menu items that are not selectable are grayed out.

ENGLISH

IMPORTANT: To aid reporting in case of loss or theft, please record the TV/DVD’s model and serial numbers in the space provided. The numbers are located at the rear of the TV/DVD.

IMPORTANT INFORMATION

WARNING:

CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK,

TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK, DO NOT EXPOSE THIS PRODUCT TO RAIN OR MOISTURE.

CAUTION

RISK OF ELECTRIC SHOCK DO NOT OPEN

DO NOT REMOVE COVER (OR BACK).

NO USER-SERVICEABLE PARTS INSIDE.

REFER SERVICING TO QUALIFIED SERVICE

PERSONNEL.

Model No.: Serial No.:

The lightning flash with arrow-head symbol, within an equilateral triangle, is intended to alert the user to the presence of uninsulated “dangerous voltage” within the product’s enclosure that may be of sufficient magnitude to constitute a risk of electric shock to persons.

The exclamation point within a triangle is intended to alert the user to the presence of important operating and maintenance (servicing) instructions in the literature accompanying the product.

IMPORTANT INFORMATION

CAUTION: TO PREVENT ELECTRIC SHOCK, MATCH WIDE BLADE OF PLUG TO WIDE SLOT, FULLY

INSERT.

CAUTION:

DO NOT PLACE THIS PRODUCT ON AN UNSTABLE CART, STAND, TRIPOD, BRACKET, OR TABLE. THE PRODUCT MAY FALL CAUSING SERIOUS PERSONAL INJURY AND SERIOUS DAMAGE TO THE PRODUCT. USE ONLY WITH A CART, STAND, TRIPOD, BRACKET, OR TABLE RECOMMENDED BY THE MANUFACTURER OR SOLD WITH THE PRODUCT. FOLLOW THE MANUFACTURER’S INSTRUCTIONS WHEN INSTALLING THE PRODUCT AND USE MOUNTING ACCESSORIES RECOMMENDED BY THE MANUFACTURER. A PRODUCT AND CART COMBINATION SHOULD BE MOVED WITH CARE. QUICK STOPS, EXCESSIVE FORCE, AND UNEVEN SURFACES MAY CAUSE THE PRODUCT AND CART COMBINATION TO OVERTURN.

WARNING: FCC Regulations state that any unauthorized changes or modiﬁ cations to this equipment not expressly approved by the manufacturer could void the user’s authority to operate this equipment.

CAUTION:

This product satisﬁ es FCC regulations when shielded cables and connectors are used to connect the unit to other equipment. To prevent electromagnetic interference with electric appliances such as radios and televisions, use shielded cables and connectors for connections.

“Note to CATV system installer: This reminder is provided to call the CATV system installer’s attention to Article 820-40 of the National Electrical Code that provides guidelines for proper grounding and, in particular, speciﬁ es that the cable ground shall be connected to the grounding system of the building, as close to the point of cable entry as practical.”

This product utilizes tin-lead solder, and ﬂ uorescent lamp containing a small amount of mercury. Disposal of these materials may be regulated due to environmental considerations. For disposal or recycling information, please contact your local authorities or the Electronic Industries Alliance: www.eia.org

CAUTION:

THIS DIGITAL VIDEO PLAYER EMPLOYS A LASER SYSTEM. TO ENSURE PROPER USE OF THIS PRODUCT, PLEASE READ THIS USER’S GUIDE CAREFULLY AND RETAIN FOR FUTURE REFERENCE. SHOULD THE UNIT REQUIRE MAINTENANCE, CONTACT AN AUTHORIZED SERVICE LOCATION SEE SERVICE PROCEDURE. USE OF CONTROLS, ADJUSTMENTS OR THE PERFORMANCE OF PROCEDURES OTHER THAN THOSE SPECIFIED HEREIN MAY RESULT IN HAZARDOUS RADIATION EXPOSURE. TO PREVENT DIRECT EXPOSURE TO LASER BEAM, DO NOT TRY TO OPEN THE ENCLOSURE. VISIBLE LASER RADIATION MAY BE PRESENT WHEN THE ENCLOSURE IS OPENED. DO NOT STARE INTO BEAM.

U.S.A. ONLY

DECLARATION OF CONFORMITY

SHARP COMBINATION LIQUID CRYSTAL TELEVISION AND DVD CD PLAYER, MODEL LC-20DV20U. This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:

(1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.

RESPONSIBLE PARTY: SHARP ELECTRONICS CORPORATION Sharp Plaza, Mahwah, New Jersey 07430-2135 TEL: 1-800-BE-SHARP

For Business Customers: URL http://www. sharpusa. com

INFORMATION:

This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: —Reorient or relocate the receiving antenna. —Increase the separation between the equipment and receiver. —Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. —Consult the dealer or an experienced radio/TV technician for help.

U.S. A . O N LY

Trademarks

• Manufactured under license from Dolby Laboratories. “Dolby” and the double-D symbol are trademarks of Dolby Laboratories.

• “HDMI, the HDMI logo and High-Deﬁ nition Multimedia Interface are trademarks or registered trademarks of HDMI Licensing LLC.”

• “DTS” and “DTS Digital Out” are trademarks of Digital Theater Systems, Inc.

DEAR SHARP CUSTOMER

Thank you for your purchase of the Sharp Combination Liquid Crystal Television and DVD/CD player. To ensure safety and many years of trouble-free operation of your product, please read the Important Safety Instructions carefully before using this product.

IMPORTANT SAFETY INSTRUCTIONS

Electricity is used to perform many useful functions, but it can also cause personal injuries and property damage if improperly handled. This product has been engineered and manufactured with the highest priority on safety. However, improper use can result in electric shock and/or fire. In order to prevent potential danger, please observe the following instructions when installing, operating and cleaning the product. To ensure your safety and prolong the service life of your Liquid Crystal Television, please read the following precautions carefully before using the product.

1) Read these instructions.

2) Keep these instructions.

3) Heed all warnings.

4) Follow all instructions.

5) Do not use this apparatus near water.

6) Clean only with dry cloth.

7) Do not block any ventilation openings. Install in accordance with the manufacturer’s instructions.

8) Do not install near any heat sources such as radiators, heat registers, stoves, or other apparatus (including amplifiers) that produce heat.

9) Do not defeat the safety purpose of the polarized or grounding-type plug. A polarized plug has two blades with one wider than the other. A grounding type plug has two blades and a third grounding prong. The wide blade or the third prong are provided for your safety. If the provided plug does not fit into your outlet, consult an electrician for replacement of the obsolete outlet.

10) Protect the power cord from being walked on or pinched particularly at plugs, convenience receptacles, and the point where they exit from the apparatus.

11) Only use attachments/accessories specified by the manufacturer.

12) Use only with the cart, stand, tripod, bracket, or table specified by the manufacturer, or sold with the apparatus. When a cart is used, use caution when moving the cart/apparatus combination to avoid injury from tip-over.

13) Unplug this apparatus during lightning storms or when unused for long periods of time.

14) Refer all servicing to qualified service personnel. Servicing is required when the apparatus has been damaged in any way, such as power-supply cord or plug is damaged, liquid has been spilled or objects have fallen into the apparatus, the apparatus has been exposed to rain or moisture, does not operate normally, or has been dropped.

Additional Safety Information

15) Power Sources—This product should be operated only from the type of power source indicated on the marking label. If you are not sure of the type of power supply to your home, consult your product dealer or local power company. For products intended to operate from battery power, or other sources, refer to the operating instructions.

16) Overloading—Do not overload wall outlets, extension cords, or integral convenience receptacles as this can result in a risk of fire or electric shock.

17) Object and Liquid Entry—Never push objects of any kind into this product through openings as they may touch dangerous voltage points or short-out parts that could result in a fire or electric shock. Never spill liquid of any kind on the product.

18) Damage Requiring Service—Unplug this product from the wall outlet and refer servicing to qualified service personnel under the following conditions:

a) When the AC cord or plug is damaged, b) If liquid has been spilled, or objects have fallen into the product, c) If the product has been exposed to rain or water, d) If the product does not operate normally by following the operating instructions. Adjust only those controls that are covered by the operating instructions as an improper adjustment of other

controls may result in damage and will often require extensive work by a qualified technician to restore the

product to its normal operation, e) If the product has been dropped or damaged in any way, and f) When the product exhibits a distinct change in performance - this indicates a need for service.

19) Replacement Parts—When replacement parts are required, be sure the service technician has used replacement parts specified by the manufacturer or have the same characteristics as the original part. Unauthorized substitutions may result in fire, electric shock, or other hazards.

20) Safety Check—Upon completion of any service or repairs to this product, ask the service technician to perform safety checks to determine that the product is in proper operating condition.

21) Wall or ceiling mounting—When mounting the product on a wall or ceiling, be sure to install the product according to the method recommended by the manufacturer.

IMPORTANT SAFETY INSTRUCTIONS

• Water and Moisture — Do not use this product near water - for example, near a bath tub, wash bowl, kitchen sink, or laundry tub; in a wet basement; or near a swimming pool; and the like.

• Stand — Do not place the product on an unstable cart, stand, tripod or table. Placing the product on an unstable base can cause the product to fall, resulting in serious personal injuries as well as damage to the product. Use only a cart, stand, tripod, bracket or table recommended by the manufacturer or sold with the product. When mounting the product on a wall, be sure to follow the manufacturer’s instructions. Use only the mounting hardware recommended by the manufacturer.

• Selecting the location — Select a place with no direct sunlight and good ventilation.

• Ventilation — The vents and other openings in the cabinet are designed for ventilation. Do not cover or block these vents and openings since insufﬁ cient ventilation can cause overheating and/or shorten the life of the product. Do not place the product on a bed, sofa, rug or other similar surface, since they can block ventilation openings. This product is not designed for built-in installation; do not place the product in an enclosed place such as a bookcase or rack, unless proper ventilation is provided or the manufacturer’s instructions are followed.

• The Liquid Crystal panel used in this product is made of glass. Therefore, it can break when the product is dropped or applied with impact. Be careful not to be injured by broken glass pieces in case the panel breaks.

• Heat — The product should be situated away from heat sources such as radiators, heat registers, stoves, or other products (including ampliﬁ ers) that produce heat.

• The Liquid Crystal panel is a very high technology product with 3,147,264 thin ﬁ lm transistors, giving you ﬁ ne picture details.

Occasionally, a few non-active pixels may appear on the screen as a ﬁ xed point of blue, green or red. Please note that

this does not affect the performance of your product.

• Lightning — For added protection for this television equipment during a lightning storm, or when it is left unattended and unused for long periods of time, unplug it from the wall outlet and disconnect the antenna. This will prevent damage to the equipment due to lightning and power-line surges.

• Power Lines — An outside antenna system should not be located in the vicinity of overhead power lines or other electric light or power circuits, or where it can fall into such power lines or circuits. When installing an outside antenna system, extreme care should be taken to keep from touching such power lines or circuits as contact with them might be fatal.

• Outdoor Antenna Grounding — If an outside antenna is connected to the television equipment, be sure the antenna system is grounded so as to provide some protection against voltage surges and built-up static charges. Article 810 of the National Electrical Code, ANSI/NFPA 70, provides information with regard to proper grounding of the mast and supporting structure, grounding of the lead-in wire to an antenna discharge unit, size of grounding conductors, location of antenna-discharge unit, connection to grounding electrodes, and requirements for the grounding electrode.

EXAMPLE OF ANTENNA GROUNDING AS PER NATIONAL ELECTRICAL CODE, ANSI/NFPA 70

ANTENNA LEAD IN WIRE

GROUND CLAMP

ELECTRIC SERVICE EQUIPMENT

NEC — NATIONAL ELECTRICAL CODE

• To prevent ﬁ re, never place any type of candle or ﬂ ames on the top or near the TV set.

• To prevent ﬁ re or shock hazard, do not expose this product to dripping or splashing. No objects ﬁ lled with liquids, such as vases, should be placed on the product.

• To prevent ﬁ re or shock hazard, do not place the AC cord under the TV set or other heavy items.

• Turn off the main power and unplug the AC cord from the wall outlet before handling.

• Use a soft cloth and gently wipe the surface of the display panel. Using a hard cloth may scratch the panel surface.

• Use a soft damp cloth to gently wipe the panel when it is really dirty. (It may scratch the panel surface when wiped strongly.)

• If the panel is dusty, use an anti-static brush, which is commercially available, to clean it.

• To protect the panel, do not use a dirty cloth, liquid cleaners or chemical cloth to clean it, such materials may damage the panel surface.

• Do not display a still picture for a long time, as this could cause an afterimage to remain.

• Install the product on the place where the AC cord can be unplugged easily from the AC outlet, or from the AC INPUT terminal on the rear of the product.

• CONDENSATION — Moisture will form in the operating section of the player if the player is brought from cool surroundings into a warm room or if the temperature of the room rises suddenly. When this happens, player’s performance will be impaired. To prevent this, let the player stand in its new surroundings for about an hour before switching it on, or make sure that the room temperature rises gradually. Condensation may also form during the summer if the player is exposed to the breeze from an air conditioner. In such cases, change the location of the player.

• DISC SLOT — Keep your ﬁ ngers well clear of the disc slot as it is closing. Failure to do so may cause serious personal injury.

• LASER BEAM — Do not look into the opening of the disc slot or ventilation opening of the product to see the source of the laser beam. Doing so may cause sight damage.

• DISC — Do not use a cracked, deformed, or repaired disc. These discs are easily broken and may cause serious personal injury and product malfunction.

ANTENNA DISCHARGE UNIT (NEC SECTION 810-20)

GROUNDING CONDUCTORS

(NEC SECTION 810-21) GROUND CLAMPS POWER SERVICE GROUNDING ELECTRODE

SYSTEM (NEC ART 250, PART H)

Disc

Discs which can be played back

In this unit, use only discs that meet the standard, such as those bearing the below logo marks on the disc label surface. If you use a non-standard disc, we cannot guarantee playback. Even if such a disc can be played back, we cannot guarantee the image or sound quality. The DVD logo is a registered trademark.

Media type Logo mark

DVD-Video

DVD-R/RW (Video format only)

Audio CD*

CD-R/CD-RW (CD-DA, MP3, WMA or JPEG format)

* This unit is designed to playback music Compact Discs

(CD) that conform to the CD standard. CDs that contain (copy-restriction) signals to protect copyrights cannot be played back.

• Some CD-R/RWs and DVD-R/RW can not be played back depending on the recording conditions.

• 8 cm discs can be played without an adapter.

Region management information

This unit is designed and manufactured to support the region management information that is recorded on a DVD disc. If the region number written on the DVD disc does not correspond to the region number of this unit, this unit cannot play that disc.

• The region number of this unit is “1”.

• The unit will play DVD-Video discs marked with labels

containing “1” or “ALL”.

Example:

ALL

Discs which cannot be played back

The discs listed below cannot be played back in general. Even if one of these can be played back, it may not be played back correctly. If a disc is played back by mistake, extensively loud sounds may blow the speakers or may damage the hearing of those in hearing range. Do not playback the discs listed below. CDG, Photo-CD, CD-ROM, CD-TEXT, CD-EXTRA, SACD, PD, DVD-ROM, SVCD, CVD, VCD, DVD-RAM,

DVD+R/RW, DVD audio, etc.

The following DVD-Video discs may not be played back on this unit:

• DVD-Video that do not have the region number “1” or “ALL”.

• PAL or SECAM DVD-Video.

• Prohibited or business-use DVD-Video.

CD-R/CD-RWs cannot be played back for the following reasons.

• Compatibility of the disc and this unit.

• Compatibility of the disc and the recorder used.

• Unﬁ nalised discs.

Never use the following discs or accessories. It may cause serious damage to the TV/DVD.

• Irregular shaped discs such as card shaped, heart shaped

• The ring protector or other disc accessories

• The 8cm disc adapter

• Stickered or papered discs

• Discs with scotch tape, glue or other remains of labels

Title/Chapter/Track

A DVD-Video has large partitions called “Titles”, and smaller partitions within them called “Chapters”.

DVD DISC

2 ELTIT1 ELTIT

CHAPTER 1

CHAPTER 2 CHAPTER 2 CHAPTER 3CHAPTER 1

Operating DVD-Video

• Some operations of DVD-Video may be prohibited by the manufacturer, or some operation methods or functions of the DVD-Video may be different from the description in this manual.

• If you attempt an operation that is prohibited by either

the disc or the unit, a “

screen. For operations prohibited by the disc, see the information that came with the disc.

• When the menu screen or the operation guide appears

during disc playback, follow the displayed information.

” mark will appear on the TV

A audio CD has other partitions called “Tracks”. A number is allotted to each partition and these numbers are called “title numbers”, “chapter numbers” or “track numbers”.

Audio CD

TRACK 1 TRACK 2 TRACK 3 TRACK 4 TRACK 5

Disc

Handling discs

Removing the Disc from its case

Be sure to hold the edge of disc. Do not touch the surface of the disc. Pick up the disc gently from the case.

• Do not scratch the disc.

• Do not get dirt on the surface of the disc.

• Do not stick a label or adhesive tape on the disc.

• Do not drop or bend the disc.

Storing discs

• Store the disc in the case to avoid any risk of scratches, dirt or damage.

• Do not leave the disc exposed to direct sunlight or in hot or humid places.

Cleaning discs

Wipe the disc with a clean, dry cloth from the center outward toward the edges.

• Do not wipe the disc in a circular motion around the

center.

• Do not use liquid or aerosol cleaners.

Notes on copyright

• This product incorporates copyright protection technology that is protected by U.S. patents and other intellectual property rights. Use of this copyright protection technology must be authorized by Macrovision, and is intended for home and other limited viewing uses only unless otherwise authorized by Macrovision. Reverse engineering or disassembly is prohibited.

• Unauthorized recording of copyrighted television programs, ﬁ lms, video cassettes and other materials may infringe the rights of copyright owners and be contrary to copyright laws.

Supplied accessories

Make sure the following accessories are provided with the product.

Remote control unit (X1)

Page 8 Page 8

“AA” size battery (X2) Operation manual (X1)

LC-20DV20U

COMBINATION LIQUID CRYSTAL TELEVISION AND DVD/CD PLAYER COMBINÉ TÉLÉVISEUR ACL ET LECTEUR DVD/CD COMBINACION TELEVISOR CON PANTALLA DE CRISTAL LÍQUIDO CON DVD/DISCOS COMPACTOS

OPERATION MANUAL MODE D’EMPLOI MANUAL DE OPERACIÓN

QUICK REFERENCE

Ventilation & Cleaning Tips

Keep your TV/DVD in a well ventilated area and make sure not to place it by a heat source or use near water. The TV/DVD is designed for AC use only and should be used with supplied AC cord.

Clean the screen by spraying a soft lint free cloth with water to lightly moisten. Gently wipe and avoid pressing on the screen. To clean the outer cabinet, use the same method. Do not use liquid or aerosol cleaners.

The screen is glass and can be scratched or broken when dropped or impacted.

QUICK INSTALLATION TIPS

1. Attach your antenna to the back of the TV/DVD.

(See page 12.)

3. How to turn on the TV/DVD for the ﬁ rst time. A) Press POWER on TV/DVD.

sont conçus pour protéger l’environnement par un rendement

han sido diseñados para proteger el medio

ENGLISHFRANÇAISESPAÑOL

2. Connect the AC plug for the TV/DVD into the wall

outlet.

AC outlet

• Place the TV/DVD close to the AC outlet, and keep the power plug within reach.

NOTE

• TO PREVENT RISK OF ELECTRIC SHOCK, DO NOT TOUCH UN-INSULATED PARTS OF ANY CABLES WITH THE AC CORD CONNECTED.

POWER

B) POWER indicator on the front of the TV/DVD lights

GREEN.

POWER indicator

QUICK REFERENCE

If the remote control fails to operate TV/DVD functions, replace the batteries in the remote control unit.

1 Open the battery cover.

2 Insert two “AA” size batteries

3 Close the battery cover.

(supplied with the product).

• Place the batteries with their terminals corresponding to the (+) and (–) indications in the battery compartment.

NOTE

Improper use of batteries can result in chemical leakage or explosion. Be sure to follow the instructions below.

• Do not mix batteries of different types. Different types of batteries have different characteristics.

• Do not mix old and new batteries. Mixing old and new batteries can shorten the life of new batteries or cause chemical leakage in old batteries.

• Remove batteries as soon as they are worn out. Chemicals that leak from batteries that come in contact with skin can cause a rash. If you ﬁ nd any chemical leakage, wipe thoroughly with a cloth.

• The batteries supplied with this product may have a shorter life expectancy due to storage conditions.

• If you will not be using the remote control unit for an extended period of time, remove batteries from it.

16’4”(5 m)

Remote control sensor

30°30°

IMPORTANT:

The POWER indicator on the television should light GREEN indicating you have power to the TV/DVD. If the POWER indicator on the television still does not light up, press POWER on the

remote control to turn the power on.

IMPORTANT:

IF THE UNIT DOES NOT POWER ON - UNPLUG THE TELEVISION FROM THE OUTLET AND REPEAT THE INSTALLATION STEPS.

IF YOU STILL ENCOUNTER NO POWER, PLEASE CONTACT US AT 1-800-BE-SHARP. Please refer to the BASIC ADJUSTMENT SETTINGS SECTION and basic Initial setup functions and USING

EXTERNAL EQUIPMENT SECTION for other device connections (DVD, VCR, AUDIO, etc) in your operation manual.

IMPORTANT INFORMATION ................................... 2

Trademarks ..............................................................2

DEAR SHARP CUSTOMER ..................................... 3

IMPORTANT SAFETY INSTRUCTIONS .................. 3

DISC ..........................................................................5

Discs which can be played back .........................5

Discs which cannot be played back ....................5

Title/Chapter/Track ..............................................5

Handling discs ..................................................... 6

Supplied accessories ..............................................7

QUICK REFERENCE ................................................7

Contents ...................................................................9

Part names ............................................................. 10

TV/DVD (Front) .................................................10

TV/DVD (Right) .................................................10

TV/DVD (Rear) ..................................................10

Remote control unit ........................................... 11

Preparation.............................................................12

Using the remote control unit ............................12

Cautions regarding remote control unit ............. 12

Antennas ...........................................................12

Watching TV ...........................................................13

Preparation ........................................................13

Turning on the power ........................................13

Select the TV mode ........................................... 13

Turning off the power ........................................13

Changing channels ............................................13

Changing volume/sound ....................................13

Initial setup ........................................................ 14

Setting MTS/SAP stereo mode .........................15

Setting surround sound ..................................... 15

Basic adjustment settings .................................... 16

Menu operation buttons .....................................16

Menu items ........................................................ 16

Picture adjustments ........................................... 17

Color temperature .............................................17

Cinema mode .................................................... 17

Back lighting ...................................................... 17

Sound adjustment .............................................18

Labeling channels .............................................18

Using external equipment.....................................19

Displaying an external equipment image ..........19

Connecting a DVD player or a digital TV STB

(Cable) ...............................................................19

Connecting a VCR, game console or

camcorder .........................................................19

Connecting HDMI equipment ............................ 20

Displaying an image from HDMI equipment ...... 20

Selecting HDMI audio input source ................... 20

Using digital audio output .................................. 20

Useful adjustment settings ................................... 21

Input label .......................................................... 21

AV mode ............................................................21

View mode for 4:3 programs ............................. 22

View mode for HD programs ............................. 22

Picture scroll ...................................................... 22

Aspect ...............................................................22

Closed captions ................................................. 23

Password setting for parental control ................ 24

Parental control (V-CHIP) ..................................25

TV Parental Guidelines (TV Guidelines) ...........26

Voluntary movie rating system (MPAA) .............26

How to temporarily release the V-CHIP block ... 26 Reactivating the temporarily released V-CHIP

block ..................................................................26

Connecting a PC (Personal Computer) ............... 27

Viewing an image from a PC ............................. 27

Displaying an image from a PC ......................... 27

Picture and Audio adjustment in the

PC mode ...........................................................28

PC compatibility chart ........................................28

Watching the DVD .................................................29

Preparation ........................................................29

Turning on the power ........................................29

Select the DVD mode ........................................ 29

Turning off the power ........................................29

Playback procedure ...........................................30

Status display of disc .........................................30

Special playback ...............................................31

Zooming ............................................................31

Locating desired scene .....................................31

Repeat playback ................................................32

A-B Repeat playback .........................................32

Marking desired scenes ....................................32

Program playback (only CD) ............................ 33

Random playback (only CD) .............................33

Changing angles ...............................................33

Title selection ....................................................33

DVD menu ......................................................... 33

Changing soundtrack language .........................34

Subtitles .............................................................34

MP3/WMA/JPEG CD playback .............................. 35

MP3/WMA/JPEG CD information ...................... 35

MP3/WMA CD playback .................................... 36

JPEG CD playback ............................................36

About ﬁ le menu .................................................36

Setting the JPEG interval .................................. 37

Setting the select ﬁ les .......................................37

Function setup .......................................................38

Basic operation buttons ..................................... 38

Menu items ........................................................ 38

Setting the language .........................................39

Setting the aspect ratio of TV screen ................ 39

Setting on screen display .................................. 40

Setting the picture mode ...................................40

Dynamic Range Control .................................... 40

Parental control setting ......................................41

To change the parental level ............................. 41

Temporary disabling of rating level by DVD

disc ....................................................................42

Appendix ................................................................43

Language code list ............................................ 43

Troubleshooting .................................................44

Troubleshooting-PC mode ................................44

Troubleshooting-DVD ........................................45

Speciﬁ cations ....................................................46

Calling for Service ................................................. 48

LIMITED WARRANTY ........................................... 48

Dimensional Drawings

• The dimensional drawings for the LCD TV set are shown on the inside back cover.

Part names

TV/DVD (Front)

Channel buttons (CH / )

Volume buttons (VOL–/+)

MENU button

POWER button

PLAY STOP SKIP EJECT

INPUT button

POWER indicator

Remote control sensor

PLAY STOP SKIP EJECT

PLAY button

STOP button

/SKIP button

NOTE

• INPUT, CH ( )/( ), VOL (–)/(+) and MENU on the main unit have the same functions as the same buttons on the remote control. Fundamentally, this operation manual provides a description based on operation using the remote control.

• To change the vertical angle of the TV/DVD, tilt the

screen up to 5 degrees forward or 7 degrees backward. Please adjust the angle so that the TV/DVD can be watched most comfortably.

EJECT button

TV/DVD (Rear)

Listening with headphones

Plug the headphone mini-plug into the headphone jack located on the back of the main unit.

On-screen display

VOLUME 25

Adjust the sound volume using VOL (+)/(–) on the remote control.

TV/DVD (Right)

Disc slot

ANT./CABLE in

COAXIAL DIGITAL

NOTE

• Headphones are not included in the supplied accessories.

• No sound is heard from the main unit speakers when a headphone mini-plug is connected into the headphone jack.

• Do not set the volume at a high level. Hearing experts advise against extended listening at high volume levels.

AUDIO OUTPUT terminal

INPUT1 terminals

HEADPHONE terminal

INPUT2 terminals

INPUT3 terminals

INPUT4 terminals

INPUT5 terminals

Part names

Remote control unit

14 15 16

17 18

19 20

3 4

5 6

22 23

24 25

8 9

10 11

12 13

1 POWER: Switch the power on or enters standby mode.

(See page 13.)

2 0 – 9: Set the channel. (See page 13.) 3 SUBTITLE: Set subtitle. (See page 34.) 4 REV : Review playback. (See page 31.) 5 SKIP /: Skip chapter to reverse or forward

direction. (See page 31.)

6 STILL/PAUSE: Still picture of DVD / Pause CD sound.

(See page 31.)

7 SETUP/TV MENU: TV mode - Display menu of TV

/DVD mode - Call up initial setup mode. (See pages 16,

38.)

8 S/T/W/X/ENTER: Select a desired item on the

screen.

SLOW

page 31.)

9 EXIT/CANCEL: Turn off the menu screen / Reset

information in the menu.

10 PLAY MODE: Select playback mode. (See page 33.) 11 AUDIO: Display the MTS setting menu. / Change

sound track language. (See pages 15,34.)

12 RETURN: Turn off the DVD setup menu screen. 13 A-B REPEAT: Repeat playback between A and B. (See

page 32.)

: Reverse/Forward -slow motion. (See

27 28

29 30

14 DISPLAY: Display the current channel (or input

source) information on the screen. Press again to clear the display.

• Analog channel status will display on the screen for approx. 4 seconds.

15 TV/DVD: Switch between TV/AV and DVD. (See pages

13, 29.)

16 EJECT: Eject the disc. (See page 30.) 17 SLEEP: Set a time when the TV automatically switches

to standby. Each time you this button, the sleep timer automatically starts counting down.

• If you want to adjust the sleep timer again, you can press this button repeatedly then change the time setting.

• Select “0h00m” by pressing SLEEP repeatedly to cancel the sleep timer.

• The TV will enter the standby mode when the remaining time reaches zero.

18 INPUT: Select input source. (TV, INPUT1~5) (See

page 20.)

19 VIEW MODE: Select the screen size. (See page 22.) 20 VOL +/–: Set the volume. (See page 13.) 21 CH 22 MUTE: Mute the sound. “MUTE” will be displayed on

23 FWD: Fast forward playback. (See page 31.) 24 PLAY: Playback. (See page 30.) 25 STOP: Stop. (See page 30.) 26 DVD MENU: Display DVD menu. (See page 33.) 27 TOP MENU: Select title. (See page 33.) 28 ANGLE: Change playback channel. (See page 33.) 29 ZOOM: Zoom. (See page 31.) 30 DIRECT SKIP: Locating desired scene of DVD. (See

31 MARKER: Index (DVD). (See page 32.)

• When using the remote control unit, point it at the TV/

/ : Select the channel. (See page 13.)

the screen, and the sound is silenced. The muting feature can be released by pressing this button again or one of the VOL +/– buttons.

page 31.)

NOTE

DVD. (See page 8.)

Preparation

Using the remote control unit

Use the remote control unit by pointing it towards the remote control sensor on the TV. Objects between the remote control unit and the remote control sensor may prevent proper operation.

Cautions regarding remote control unit

• Do not expose the remote control unit to shock. In addition, do not expose the remote control unit to liquids, and do not place in an area

with high humidity.

• Do not install or place the remote control unit under direct sunlight. The heat may cause deformation of the remote control unit.

• The remote control unit may not work properly if the remote control sensor on the TV is under direct sunlight or strong lighting. In such cases, change the angle of the lighting or the TV, or operate the remote control unit closer to the remote control sensor.

Antennas

To enjoy a clearer picture, use an outdoor antenna. The following is a brief explanation of the types of connections that are used for a coaxial cable. If your outdoor antenna uses a 75-ohm coaxial cable with an F-type connector, plug it into the antenna terminal at the rear of the TV set.

1. A 75-ohm system is generally a round cable with F-type connector that can easily be attached to a terminal without tools (Commercially available).

F-type connector

75-ohm coaxial cable (round)

2. A 300-ohm system is a ﬂ at “twin-lead” cable that can be attached to a 75-ohm terminal through a 300/75-ohm adapter (Commercially available).

300-ohm twin-lead cable (ﬂ at)

Connecting Antenna Cable

Cable without a

CATV converter

VHF/UHF antenna

Combination VHF/

Cable TV lead-In

75-ohm coaxial cable (round)

Home Antenna terminal (75-ohm)

Coaxial cable (commercially available)

Home Antenna terminal (75-ohm)

Coaxial cable (commercially available)

UHF antenna

75-ohm coaxial cable (round)

300/75-ohm adapter

300-ohm twin-lead (flat)

(commercially available)

F-type connector should be ﬁ nger-

NOTICE

tightened only.

When connecting the RF cable to the TV set, do not tighten F-type connector with tools. If tools are used, it may cause damage to your TV set. (The breaking of internal circuit, etc.)

F-type connector

75-ohm coaxial cable

• Connect the antenna cable to the TV using one of the methods in the illustration as shown (1, 2, 3 or 4).

4 Separate VHF/ UHF antenna

VHF ANTENNA

UHF ANTENNA

300-ohm twin-lead

75-ohm coaxial cable

Combiner (commercially available)

IN OUT

To TV antenna terminal

Watching TV

Simple operations for watching a TV program

POWER

MENU VOL +/

–

POWER indicator

TV/DVD status indicator (POWER)

ON Lighting (Green)

Lighting (Red)OFF/Standby

Turning off the power

Press POWER on the TV/DVD, or POWER on the remote control.

• The TV enters standby mode and the image on the screen disappears.

• The POWER indicator on the TV/DVD changes to Red.

NOTE

• If you are not going to use this TV/DVD for a long period of time, be sure to remove the AC cord from the power outlet.

• Weak electric power is still consumed even when POWER is turned off.

• If a station being viewed stops broadcasting, the TV will automatically shut itself off after 15 minutes.

Changing channels

You can change channels in several ways.

Method 1

Using CH TV/DVD.

Method 2

Using remote control buttons 0 for VHF/UHF/CATV.

To select a 1 or 2-digit channel number (e. g., Channel 5):

Press 5

To select a 3-digit channel number (e. g., Channel 115):

Press 1J1J5

/ on the remote control unit or on the

–9 to select channels

Preparation

Perform the following steps before you press POWER on the remote control unit.

1. Insert the batteries into the remote control unit. (See page 8.)

2. Connect the antenna cable to the TV/DVD. (See page

12.)

3. Plug in the AC cord to the AC outlet. (See page 7.)

Turning on the power

Press POWER on the TV/DVD, or POWER on the remote control.

• POWER indicator (Green): The TV/DVD is on.

Select the TV mode

Press TV/DVD to select the TV mode.

NOTE

• The LANGUAGE setup menu will appear automatically when TV MENU is pressed on for the ﬁ rst time.

NOTE

• When selecting a 1-digit channel number, it is not necessary to press 0 before the number.

• If you push “0” by itself, nothing will happen.

• Complete the above steps within a few seconds.

Changing volume/sound

Changing the volume

You can change the volume on the TV/DVD or on the remote control unit.

Using VOL +/

• To increase the volume, press VOL +.

• To decrease the volume, press

NOTE

• VOL+/– on the TV/DVD operates the same as VOL+/ on the remote control unit.

–

VOL

VOLUME 25

–

Watching TV

Initial setup

Language setting When you press TV MENU for the ﬁ rst time, the LANGUAGE setup menu will appear automatically.

Select from among 3 languages: English, French and Spanish.

Press / to select the desired language

from the list.

SETUP

LANGUAGE ENGLISH

ENGLISH/FRANÇAIS/ESPAÑOL

CLOCK SET 12:00AM AIR/CABLE CABLE AUTO CH MEMORY ADD/DELETE ADD

:SELECT :ADJUST

Clock setting

Please set correct time manually.

Press / to select “CLOCK SET”.

Press / to select HOUR or MINUTE, then press / to set the present time. After setting the time correctly, press ENTER.

SETUP

LANGUAGE ENGLISH

CLOCK SET 12:00AM AIR/CABLE CABLE AUTO CH MEMORY ADD/DELETE ADD

Channel search

AUTO CHANNEL MEMORY makes the TV/DVD look for all channels viewable in the set area.

Press / to select “AUTO CH MEMORY”

SETUP

LANGUAGE ENGLISH

CLOCK SET 12:00AM AIR/CABLE CABLE AUTO CH MEMORY ADD/DELETE ADD

:SELECT :ADJUST

Press /. The TV/DVD will begin memorizing all the channels available in your area.

AUTO CH MEMORY

EXIT:CANCEL

PROGRAMMING NOW PLEASE WAIT CABLE

007

Skipping stored channel

You can set channel selection disabled using CH / .

Select the channel you want to skip.

Press TV MENU and the MENU screen

displays.

:SELECT :ADJUST

Antenna setting

Make sure what kind of connection is made with your TV/DVD when selecting “AIR” or “CABLE”.

Press / to select “AIR/CABLE”, then

press / to select “AIR” or “CABLE”.

SETUP

LANGUAGE ENGLISH

CLOCK SET 12:00AM AIR/CABLE AIR/CABLE AUTO CH MEMORY ADD/DELETE ADD

:SELECT :ADJUST

Press / to select

Press / to select “ADD/DELETE”.

Press / to select “DELETE” for selected

channel. Press EXIT to return to the normal screen.

Now, skipping channel is applied.

• To skip the other channels:

Repeat steps 1-6.

• To release the skipping channel:

Select “ADD” in step 5.

(SETUP).

Watching TV

Setting MTS/SAP stereo mode

The TV/DVD has a feature that allows reception of sound other than the main audio for the program. This feature is called Multi-channel Television Sound (MTS). The TV/DVD with MTS can receive mono sound, stereo sound and Secondary Audio Programs (SAP). The SAP feature allows a TV/DVD station to broadcast other information, which could be audio in another language or something completely different like weather information.

You can enjoy Hi-Fi stereo sound or SAP broadcasts where available.

• Stereo broadcasts View programs like live sporting events, shows and

concerts in dynamic stereo sound.

• SAP broadcasts Receive TV broadcasts in either MAIN or SAP sound. MAIN sound: The normal program soundtrack (either in

mono or stereo).

SAP sound: Listen to a second language, supplementary

commentary or other information. (SAP is mono sound.)

If stereo sound is difﬁ cult to hear.

• Obtain a clearer sound by manually switching to ﬁ xed mono-sound mode.

NOTE

• MTS only operates while in TV mode.

• When the TV receives a stereo or SAP broadcast, the word “STEREO” or “SAP” displays on-screen every time you turn the TV on, change the channel, or press

DISPLAY.

Setting surround sound

The surround sound feature expands the audio listening ﬁ eld wider and deeper to create exception sound quality from the TV/DVD’s speakers.

Press TV MENU and the MENU screen

displays.

Press / to select (AUDIO).

Press / to select “SURROUND”.

Press / to select the “ON” or “OFF”.

Changing MTS

You can change MTS as shown below to match the television broadcast signal.

Press AUDIO and the (AUDIO) menu

screen displays. “MTS” will be highlighted. Press AUDIO again or / to select “STR

(STEREO)”, “SAP” or “MONO”.

AUDIO

MTS STR/SAP/MONO BASS 25 TREBLE 25 BALANCE 0 SURROUND OFF HDMI HDMI RESET ►

:SELECT :ADJUST

Press EXIT to return to the normal screen.

AUDIO

MTS STEREO BASS 25 TREBLE 25 BALANCE 0 SURROUND ON/OFF HDMI HDMI RESET ►

:SELECT :ADJUST

After your desired setting, press EXIT to

return to the normal screen.

+ 36 hidden pages