Sharp LC-20D10, LC-32D10, LC-26D10 Part Names

Page 1
English Guide

Part Names - Main Unit

Front view
Speaker section
Stand…………
Remote sensor window……………
• When using the remote control, point its head toward this window.
Ambient illumination sensor window………………………
Power indicator……………………
192
23
142
34
Top view
B-CAS card slot…………
•Open the cover and insert the B-CAS card in the direction
shown below.
57
Headphones jack……………
Ambient illumination sensor indicator……………
Timer program indicator
……………………
90・155
LC-20D10 LC-32D10/LC-26D10
20
142
198
Volume down (–) /up (+) buttons
Channel down () /up () buttons
Adjusting the LCD panel angle
• The LCD panel can be rotated horizontally up to 20°
clockwise and counter-clockwise.
• Hold the stand firmly when you adjust the monitor’s angle.
Main power switch……
……
100
34
Page 2
Rear view
The illustrations below are those of LC-32D10. LC-26D10 / 20D10 has the same layout of jacks and terminals as LC-32D10.
LAN jack...............................................
Telephone line jack..........
AV in 7 (RGB)............................
AV in 5 (HDMI).................
TV/PC Link Terminal
66
128
104・128・160
171
i.LINK (TS) jacks.....
PC input (audio)
...................
Digital audio output jack
(optical)................
114
128・134
126
B-CAS card slot………
(LC-32D10 / LC-26D10)
•Open the cover and insert the B-CAS card in the direction
shown below.
57
.
AV in 1
AV in 4 / AV out...........
3........................
102
102・107・110
BS/CS 110 antenna input terminal........
VHF/UHF antenna input terminal..........
AV in 6 (HDMI)..........
32
31
104・160
Power cable connector
(AC 100V)...
33
PartNames-MainUnit EnglishGuide
AV in 2.........
102
199
Page 3
English Guide

Part Names - Remote Control Unit

Cover closed
Display………………………
Press to display or turn off the channel call, etc.
Active/Standby……………
Press to engage the TV set in the active or standby mode.
CATV…………………………
When selecting a CATV channel by entering the channel number, press this button first, then enter the 2-digit number with the TV channel select buttons (1-10/0).
Terrestrial digital select
Press to select the terrestrial digital network. * Use this button after the TV set is
tuned to receive terrestrial digital broadcasts.
Terrestrial analog select
Press to select the terrestrial analog network.
(linked data broadcast)
Press to call the data broadcast linked with the current digital TV program.
82
34
75
61・74
49・74
80
Volume up (+)/down (-)
Press to adjust the volume.
Mute
Press to temporarily turn off the sound. Press again to return the sound volume to the previous level.
EPG………………………
Press to display or turn off the Electronic Program Guide (EPG: 番組 ) when receiving a digital broadcast.
Program info………………
Press to display detailed information (e.g. title, genre, on-air time, cast, writer, etc.) on the current digital program.
74・82
80
Cursor (up, down, left, right)………
Use to select a menu item, column, etc.
Enter/Confirm………………
Press to confirm a selected setting or menu item.
Finish………………………
Press to end the picture freeze mode, turn off the EPG display, or finish menu operation, etc.
Note
This button can be conveniently used when you are at a loss during menu or EPG operation, etc.
40
40
40
Color (blue, red, green, yellow)
……………………………
Use to operate EPGs and data program screens.
80・82
……
4448
157
75
159
74
74
74
74
74
103
86
40
40
Sleep timer…………………………
Press to select the desired remaining time period after which the TV set is automatically turned off and enters the standby mode.
Digital channel number input
When selecting a digital channel by entering the 3-digit channel number, press this button first, then enter the channel number with the channel select buttons (1-10/0).
Familink………………………
Press to record / play using AQUOS Recorders and AQUOS Surround with Familink function via HDMI cables.
Channel select………………
• Press to select a channel after selecting the desired network (terrestrial analog [地上A], terrestrial digital [地上D], BS, CS) and media (TV, radio, or data).
• Use to input a number for various settings.
CS select………………………
Press to select the CS digital networks.
BS select………………………
Press to select the BS digital network.
Media select…………………
Press to select the desired media (TV, radio, or data).
Channel up (∧)/down (∨)
Press to select channels in the current network, media and CATV channels in the ascending or descending order. * CATV channels are factory set to be
skipped.
Input select……………………
Press to select the desired input.
Other on-air programs………
Press to display the EPG for currently on-air programs only (裏番組).
Menu……………………………
Press to display or turn off the menu screen.
The menus can be displayed in English. See page 44 for instructions on how to switch the display language.
Return…………………………
Press to go back to the previous screen. Press this button instead of the Enter/Confirm (決定) button when you have selected the wrong item or input the wrong number, etc.
200
Page 4
Cover open
Picture select………………
Press to select the desired picture when watching a digital multi-picture program.
Screen mode…………………
Press to select the desired screen mode.
Freeze………………………
Press to freeze the picture.
AV mode select……………
Press to select the picture/sound setting (dynamic [locked], dynamic, standard, cinema, game, or AV memory) that best matches the current program.
i.LINK……………………
Press to select the i.LINK mode. Press to display or turn off the D-VHS VCR, AV-HDD recorder, Blu-ray Disc recorder or Hi-Vision Video camera control panel.
Favorite channel select/register
……………………………………
Press to select a user-registered channel and to turn on/off the favorite channel register/registered channel table screen.
Familink………………………
Press to operate AQUOS Recorders and AQUOS Surround with Familink function via HDMI cables.
79
130・136
151
141
118・120
75・148
159
Caption………………………
Press to display, select, or turn off captions when watching a digital program with captions.
Audio select……………
Press to select the desired audio (e.g. Japanese or English in bilingual broadcast, the main sound or a sub sound in digital multi-sound broadcast, etc.).
166
79・146
To open the cover
Hold the cover by the projections on both sides and lift upwards.
PartNames-RemoteControlUnit EnglishGuide

Basic operation for channel selection

Selecting terrestrial analog (VHF/
UHF) channels
to select terrestrial analog broadcast.
Terrestrial analog: Conventional VHF/UHF broadcast
Terrestrial digital: Terrestrial digital broadcast
BS: BS digital broadcast
CS: CS 110 digital broadcast
Channel select buttons
Network select buttons (terrestrial analog, terrestrial digital, BS, CS)
Press
Press
Selecting digital channels
Press
digital broadcast network.
Press
Types of broadcast
•
•
•
•
For details about channel selection, see page 74.
Selecting favorite channels
-
to select the desired channel.
, or to select the desired
-
to select the desired channel.
Favorite channel select/register button
Press to display the registered channel screen.
Press - to select the desired channel.
201
Loading...