Sharp HRO00201 User Manual

Cellph oneandPH Soperat orscol lectandr ecycle
unusedtelephones,batteriesandbattery
charge rsatstor esbeari ngthelo goregar dless
ofbranda ndmanuf actur ertoprot ectthe
environmentandreusevaluableresources.

BasicManual

•

The company names and product names appearing in this manual are

trademarks or registered trademarks of their respective holders.

•

For exemptions, refer to “Notes on Usage” available on the au homepage.

Forinquiries,call:

CustomerServiceCenter

Forgeneralinformationandcharges (tollfree)

Incaseabovenumbersarenotavailable,calltoll-free:

Forservicecancelingprocedureoroperationincaseoflossor
theft

(tollfree)

Fromfixed-linephones: Fromaucellphones:

areacoden otrequi red

Fromfixed-linephones: Fromaucellphones:

areacodenotrequired

KeitaiGuaranteeServiceCenter

Forloss,theftordamage

(tollfree)

Fromfixed-linephones/aucellphones:

Businesshours:9:00to21:00(7daysaweek)

0120-925-919

TappingDIALandzerowillconnectyoutoanoperatoraftercalling
157onyouraucellphone.

0120-977-033

(exceptOkinawa)

0120-977-699(Okinawa)

Soldby:KDDICORPORATION,

OKINAWACELLULARTELEPHONECOMPANY

Manufacturedby:SHARPCORPORATION

February2014,1stEdition

shl24_e.book 0 ページ ２０１４年１月３０日　木曜日　午前９時６分

1

Thank you for buying the “AQUOS PHONE SERIE mini SHL24” (simply called
the “SHL24” or the “product” from here on).
Before using the product, be sure to read the “Basic Manual” (this manual) and
“Notes on Usage”/“Setting Guide” available on the au homepage to ensure
correct use. After you have finished reading the manuals, be sure to keep them
accessible and store the printed manuals (“取扱説明書” (Basic Manual), “ご利
用にあたっての注意事項” (Notes on Usage) and “設定ガイド” (Setting Guide))
(Accessories) in safe places so that you can refer to them whenever you need
them. If you lose the printed manuals (Accessories), contact an au shop or
Customer Service Center.

■ “Basic Manual” and “Setting Guide”

The “Basic Manual” (this manual) and “Setting Guide” available on the au
homepage describe basic operations of major functions.
For detailed descriptions of various functions, refer to the “Instruction Manual
application” (Japanese version) that can be used on the product or “Full
Instruction Manual” (Japanese) available on the au homepage:

(http://www.au.kddi.com/english/support/manual/)

■ “Instruction Manual Application” (Japanese/English

Version)

You can use the “Instruction Manual application” (Japanese version) on the
product to check detailed operational procedures.
Also, you can activate intended functions from an explanation screen
depending on the functions.
On the home screen, tap [アプリ] (APPS) [[取扱説明書] (Instruction
Manual).
Also, you can use the “Instruction Manual application” (English version) on the
product to check operational procedures.
On the home screen, tap [APPS] [[Basic Manual] after switching the display
language to English (zP. 15).

• To use the application for the first time, you need to download and install it by

following on-screen instructions.

Before you start using the product, be sure to read the “Notes on Usage”
available on the au homepage to ensure correct use.
Before you assume that the product is malfunctioning, check for possible
remedies in the following au Customer Support site of au homepage:

(http://www.au.kddi.com/english/support/)

• Communication is not possible even inside the service area in places where

the signal does not reach (e.g. tunnels and basements). Also,
communication may not be possible in poor reception areas. Communication
may be interrupted if you move into a poor reception areas during
communications.

• Since this product uses radio waves, the possibility of communication

intercepts by third parties cannot be eliminated. (Though the LTE/CDMA/
GSM/UMTS system has highly secure confidential communication features.)

• The product is compatible with the international roaming service. Each

network service varies depending on the area and service content.
For details, refer to “auのネットワークサービス・海外利用” (au Network
Services/International Roaming) described in “Instruction Manual
application” (Japanese) or “Full Instruction Manual” (Japanese) available on
the au homepage.

• Since the product is a radio station under the Radio Law, you may be asked

to temporarily submit the product for inspection in accordance with the Radio
Law.

• The IMEI information of your cell phone is automatically sent to KDDI

CORPORATION for maintenance and monitoring operational status of your
cell phone.

• Since the battery is built into the product, you cannot replace it yourself. For

replacing the battery, contact an au shop or Customer Service Center.

• Take care not to inconvenience people around you when you use the product

in a public place.

Preface

Operating Instructions

Safety Precautions

When Using the Product

shl24_e.book 1 ページ ２０１４年１月３０日　木曜日　午前９時６分

2

• If you are using the product overseas, check the relevant laws and

regulations of the country/region you visit.

• When the product is used by a child, parents or guardians should thoroughly

read the “Basic Manual” (this manual) or “Notes on Usage”/“Setting Guide”/
“Full Instruction Manual” (Japanese) available on the au homepage and
teach the child how to use it.

■ Use of cell phones is not allowed in the following

places!

• Do not use a cell phone while driving a car or riding a motorbike or bicycle. It

may cause a traffic accident. Use of a cell phone while driving a car or
motorbike is prohibited by law. Use of a cell phone while riding a bicycle may
be punishable by some regulations.

• Be sure to turn off the product while you are aboard an airplane. Otherwise,

safety of your flight may be compromised.

Before you start using the product, make sure that you have all the following
packaged items with the product.

• 取扱説明書 (Basic Manual) (Japanese)

• ご利用にあたっての注意事項 (Notes on Usage) (Japanese)

• 設定ガイド (Setting Guide) (Japanese)

The following items are not included in the package.

• Purchase a specified charger (sold separately).

• Illustrations of cell phones in this manual are only for reference. They may

look different from the actual product.

au Disaster Countermeasure is an application in which you can use Disaster
Message Board, Emergency Rapid Mail (Earthquake Early Warning, Disaster
and Evacuation Information, and Tsunami Warning), Disaster Voice Messaging
Service and Disaster Information/Donation website.

A On the home screen, [APPS] [[au災害対策] (au Disaster

Countermeasure).

The au Disaster Countermeasure menu is displayed.

■ Using Disaster Message Board

Disaster Message Board is a service to enable customers in disaster areas to
register their safety information via LTE NET when large-scale disasters, such
as an earthquake whose Japan seismic scale is approximately 6-lower or
more, occur. The registered safety information can be checked by customers
using au phones, and also from other carriers’ cell phones, PCs, etc.
For details, refer to “Disaster Message Board Service” on the au homepage.

A From the au Disaster Countermeasure menu, [災害用伝言

板] (Disaster Message Board).

Follow the on-screen instructions for registration/confirmation.

Cell Phone Etiquette

List of Packaged Items

• microSD memory card

• AC adapter

• Earphone

• microUSB cable

◎ The battery is built into the product.

Using au Disaster Countermeasure
Application

SHL24

Warranty

(Japanese)

shl24_e.book 2 ページ ２０１４年１月３０日　木曜日　午前９時６分

3

■ Using Emergency Rapid Mail

Emergency Rapid Mail is a service to collectively deliver Earthquake Early
Warning and Tsunami Warning provided by the Japan Meteorological Agency,
and Disaster and Evacuation Information provided by the national government
or the local governments to au phones in the specified areas.

• At the time of purchase, receiving setting of Emergency Rapid Mail

(Earthquake Early Warning, and Disaster and Evacuation Information) is set
to “受信する” (Receive). You can receive Tsunami Warning by setting 災害・
避難情報 (Disaster and Evacuation Information).
When receiving Earthquake Early Warning, secure your safety and act
composedly according to the surrounding situations.
When receiving Tsunami Warning, leave sea coasts immediately and
evacuate to safe places such as hills and strongly-built tall buildings.

A From the au Disaster Countermeasure menu, [緊急速報メー

ル] (Emergency Rapid Mail).

The inbox is displayed.
Select a mail to check to display the details of the mail.

◎ To register the safety information, an e-mail address (〜ezweb.ne.jp) is

required. Set the e-mail address in advance.

◎ Deletion of the safety information and configurations for Safety

Notification Mail are not available during wireless LAN (Wi-Fi

®

)

connection.

◎ The Company does not guarantee the quality of this service. The

Company, regardless of the cause, shall not be liable for any problems
related to registration of safety information due to the concentration of
access to this service or equipment errors, any loss due to the damage,
ruination, etc. of safety information or any loss arising from registered
safety information.

削除 (Delete) Delete received mails.
設定

(Settings)

緊急地震速報 (Earthquake Early Warning)

Set whether to receive Earthquake Early Warning.

• Tap [受信する] (Receive)/[受信しない] (Not

receive) [[OK].

災害・避難情報 (Disaster and Evacuation
Information)

Set whether to receive Disaster and Evacuation
Information, and Tsunami Warning.

• Tap [受信する] (Receive)/[受信しない] (Not

receive) [[OK].

音量 (Volume)

Set the volume of the receiving sound.

バイブ (Vibrator)

Set whether to activate the vibrator at the time of
reception.

マナー時の鳴動 (Linkage to the manner mode)

Set whether to notify you with the manner mode
settings applied in the manner mode.

緊急地震速報 (Earthquake Early Warning)

Check the receiving sound and vibration of the
product for Earthquake Early Warning.

災害・避難情報 (Disaster and Evacuation
Information)

Check the receiving sound and vibration of the
product for Disaster and Evacuation Information,
and Tsunami Warning.

◎ This service is available only in Japan (Not available overseas).
◎ Emergency Rapid Mail is free of both information charges and

communication charges.

◎ Emergency Rapid Mail cannot be received while the power is turned off

or during a call.

◎ Emergency Rapid Mail may not be received during communication such

as while sending and receiving e-mails/SMSs and while using the
browser or when you are in a place where the signal cannot be received
(e.g. tunnels and basements) or the signal is weak, even within the
service area.

◎ Emergency Rapid Mail which failed to be received will not be able to be

received again.

shl24_e.book 3 ページ ２０１４年１月３０日　木曜日　午前９時６分

4

■ Using Disaster Voice Messaging Service

Disaster Voice Messaging Service is a service to record voices with a
smartphone and deliver them as a voice message to people to whom you want
to deliver the information that you are safe when large-scale disasters occur.

A From the au Disaster Countermeasure menu, [災害用音声お

届けサービス] (Disaster Voice Messaging Service).

Follow the on-screen instructions.

■ Using Disaster Information/Donation Website

You can check the histories of Disaster and Evacuation Information delivered
by the local governments, Disaster Information portal and donation website.

A From the au Disaster Countermeasure menu, [災害情報/義

援金サイト] (Disaster Information/Donation website).

Select an item to check.

◎ When you receive Emergency Rapid Mail, you will be notified by the

dedicated alarm tone and the vibrator. The alarm tone cannot be
changed.

* When you receive E arthquake Early Warning, you will be notified by the al arm

tone, voice (“地震です” (An earthquake has o ccurred)) and the vibrator.

◎ Information intended for the areas of other than your present location may

be received.

◎ As for this service, the Company shall not be liable for any damage

incurred on the users resulted from failure or delay of information delivery
due to communication disturbance or system failure, contents of the
information or other problems that are not supposed to be blamed on the
Company.

◎ For details on Earthquake Early Warning and Tsunami Warning provided

by the Japan Meteorological Agency, refer to the agency’s homepage.

(http://www.jma.go.jp/jma/indexe.html)

Earthquake Early Warning

◎ Earthquake Early Warning notifies areas where a strong shaking (Japan

seismic scale 4 or more) is expected when an earthquake whose
maximum Japan seismic scale is predicted of 5-lower or more has been
detected.

◎ This service detects an earthquake (P-wave, preliminary tremors) near

the seismic center immediately after the earthquake occurs and
automatically calculates its location, scale and predicted strength of the
shaking. After that, you will be notified of the earthquake as soon as
possible within a few seconds to dozens of seconds before a strong
shaking from the earthquake (S-wave, principal shock) occurs.

◎ In the vicinity of the seismic center, a strong shaking may reach you

before Earthquake Early Warning.

◎ The Earthquake Early Warning distribution system provided by this

service is different from that provided by TV, radio and other
communication media and thus the arriving time of Earthquake Early
Warning may be different among those media.

Tsunami Warning

◎ Tsunami Warning notifies areas including target sea coasts of Major

Tsunami Warning and Tsunami Warning provided by the Japan
Meteorological Agency.

Disaster and Evacuation Information

◎ Disaster and Evacuation Information notifies information related to the

safety of citizens, such as evacuation advisories, evacuation orders or
various alarms delivered by the national government or the local
governments.

◎ To use this service via Wi-Fi®, making initial settings via LTE/3G networks

is required.

◎ Voice messages can be recorded for up to 30 seconds.
◎ Voice messages can be exchanged among au phones as well as other

carriers’ cell phones and PHS devices.

◎ Voices may not be heard when the media sound volume is set to low.
◎ When no free space is left on the internal memory, voice messages may

not be saved or played.

◎ Some cell phones cannot receive voice messages. For details, refer to

the au homepage.

shl24_e.book 4 ページ ２０１４年１月３０日　木曜日　午前９時６分

5

■ Note on Key Illustrations

In this manual, the key illustrations are simplified as shown below.

■ Description of Operations for Selecting Item/Icon/Key

etc.

In this manual, operation procedures are described as below.

* Tapping is to sel ect a key or icon displayed on the screen by li ghtly tapping it with

your finger.

■ Notes on Illustrations/Screenshots

The screenshots in this manual are simplified and may look different from the
actual screens. Also, part of the screen may be omitted.

Illustrations and Descriptions in This
Manual

Description Explanation

On the home screen,
[APPS] [[Phone]
[Enter “141” [[Call].

Tap “APPS” at the top of the 3-Line Home screen
and tap “ Phone”. Then tap in order of
“ ”, “ ” and “ ”. Lastly, tap
“”.

f (hold down for at
least 2 seconds).

Hold f down for at least 2 seconds.

◎ Explanations of this manual are based on the case when the color of the

main unit is “Pink” as an example.

◎ Explanations of this manual are based on the case when the product is

held vertically. If you hold it horizontally, menu items/icons/on-screen
keys etc. may be different.

◎ Menu items, layers and icons described in this manual may be different

according to functions being used and conditions.

◎ In this manual, “m icroSD™ memory card (commercially available)”,

“microSDHC

™

memory card (commercially available)” and “microSDXC™
memory card (commercially available)” are abbreviated as “microSD
memory card” or “microSD”.

◎ All the prices written in this manual exclude taxes unless otherwise noted.

Actual screen

In this manual, part of the
screen such as icons are
omitted.

In this manual

shl24_e.book 5 ページ ２０１４年１月３０日　木曜日　午前９時６分

6

■ Front/Right Side

A Earpiece (Receiver)
B Proximity sensor/Light sensor

Proximity sensor prevents inadvertent operations of the touch panel during
a call.
Light sensor detects the ambient brightness and adjusts the brightness of
display.

C Display (Touch panel)
D ud Volume up/down key

Adjust the volume.
Long touch “u” on the Welcome Sheet (Lock Screen) to turn on the mobile
light.
Long touch “d” on the home screen or Welcome Sheet (Lock Screen) to
set/disable the manner mode.

E Charging/Incoming indicator
F In camera lens
G f Power key

Turn the screen on/off.
Hold it down to turn on/off the power, set the manner mode, etc.

■ Back/Top and Bottom

H TV antenna
I Wi-Fi

®

/Bluetooth® antenna

J Mobile light
K Out camera lens
L Infrared port

Names and Functions of Parts

shl24_e.book 6 ページ ２０１４年１月３０日　木曜日　午前９時６分

7

M & mark

Hold it over a reader/writer when using Osaifu-Keitai

®

/NFC.

Send and receive data via IC communication.

N Speaker
O Internal antennas
P GPS antenna
Q au Nano IC Card (LTE)/microSD memory card cover
R au Nano IC Card (LTE) tray slot
S microSD memory card slot
T IMEI tra y

Allows you to confirm the product’s IMEI.

U Mouthpiece (Microphone)

Transmits your voice to the other party during a call. It is also used for
recording sounds. Take care not to cover the microphone with your fingers
etc. when using it.

V Strap eyelet
W Earphone/Microphone jack
X External connection jack

When you connect the common AC adapter 04 (sold separately), the
microUSB cable 01 (sold separately), etc. to the product, some applications
may not function properly since the geomagnetic sensor is affected by the
magnetism of connected devices. Use the product after removing the
cable.

The au Nano IC Card (LTE) records your personal information such as phone
numbers.
The product is compatible with au Nano IC Card (LTE) only. You cannot use
the product by inserting the au IC-Card, micro au IC-Card or au Micro IC Card
(LTE) for au phones and smartphones instead.

◎ The back cover of the product cannot be removed. Removing it forcibly

may cause damage or a fault.

◎ The battery is built into the product, and cannot be removed by the

customer. To force the power off, refer to “Turning the Power Off Forcibly”
(zP. 14).

TV antenna, Wi-Fi®/Bluetooth® antenna, internal antennas, GPS antenna

◎ Antennas are built into the product. Do not cover with hand during calls or

data communication, or place stickers over antennas. Doing so may
affect call/communication quality.

Using the au Nano IC Card (LTE)

au Nano IC Card (LTE)

◎ Make sure to unplug the microUSB plug of the common AC adapter 04

(sold separately) etc. from the product when attaching or removing the au
Nano IC Card (LTE).

au Nano IC Card (LTE)

IC (metal) part

shl24_e.book 7 ページ ２０１４年１月３０日　木曜日　午前９時６分

8

Before attaching the au Nano IC Card (LTE), turn the product off and remove
the microSD memory card.

A Open the au Nano IC Card (LTE)/microSD memory card

cover.

B Slowly pull the au Nano IC Card (LTE) tray straight out by

hooking a finger on it.

C Put the au Nano IC Card (LTE) on the au Nano IC Card

(LTE) tray.

Make sure the notches on the au Nano IC Card (LTE) and au Nano IC
Card (LTE) tray face the proper orientation and put the card slowly on the
tray.

D Slowly insert the au Nano IC Card (LTE) tray into the au

Nano IC Card (LTE) tray slot, taking care not to let the tray
be caught on the metal parts on both sides of the slot.

Confirm the position of the au Nano IC Card (LTE) tray slot and the
orientation of the au Nano IC Card (LTE) tray carefully, and insert the tray
all the way into the slot in the direction of the arrow. Inserting the tray
forcibly may damage the tray.

E Close the au Nano IC Card (LTE)/microSD memory card

cover.

Attaching the au Nano IC Card (LTE)

◎ Inserting the au Nano IC Card (LTE) tray not deeply enough may prevent

the product from functioning properly.

◎ Take care not to lose or damage the removed au Nano IC Card (LTE)

tray.

au Nano IC
Card (LTE) tray

IC (metal) part up

au Nano IC Card (LTE)

Notches

au Nano IC Card (LTE) tray

au Nano IC Card (LTE)
tray slot

Metal parts

shl24_e.book 8 ページ ２０１４年１月３０日　木曜日　午前９時６分

9

Before removing the au Nano IC Card (LTE), turn the product off and remove
the microSD memory card.

A Open the au Nano IC Card (LTE)/microSD memory card

cover.

B Slowly pull the au Nano IC Card (LTE) tray straight out by

hooking a finger on it.

C Remove the au Nano IC Card (LTE) from the au Nano IC

Card (LTE) tray.

D Slowly insert the au Nano IC Card (LTE) tray into the au

Nano IC Card (LTE) tray slot, taking care not to let the tray
be caught on the metal parts on both sides of the slot.

Confirm the position of the au Nano IC Card (LTE) tray slot and the
orientation of the au Nano IC Card (LTE) tray carefully, and insert the tray
all the way into the slot in the direction of the arrow. Inserting the tray
forcibly may damage the tray.

E Close the au Nano IC Card (LTE)/microSD memory card

cover.

Removing the au Nano IC Card (LTE)

au Nano IC
Card (LTE) tray

au Nano IC Card (LTE)
tray slot

Metal parts

shl24_e.book 9 ページ ２０１４年１月３０日　木曜日　午前９時６分

10

Before attaching a microSD memory card, turn the product off.

A Open the au Nano IC Card (LTE)/microSD memory card

cover.

B Slowly insert the microSD memory card into the microSD

memory card slot.

Confirm the orientation for inserting, then insert in the direction of the arrow
until it clicks and is locked.
Releasing the microSD memory card before it is locked may cause it to
pop out.

C Close the au Nano IC Card (LTE)/microSD memory card

cover.

Before removing the microSD memory card, turn the product off.

A Open the au Nano IC Card (LTE)/microSD memory card

cover.

B Slowly push the microSD memory card in all the way.

After it clicks, let the microSD memory card come back out a little without
releasing it. Releasing the card when it is pushed deeply into the slot may
cause it to pop out.

C Slowly pull the microSD memory card straight out.
D Close the au Nano IC Card (LTE)/microSD memory card

cover.

Using a microSD Memory Card

Attaching a microSD Memory Card

◎ Make sure that the top/bottom and front/rear of the microSD memory card

are facing correctly.
Trying to force a wrongly oriented card into the slot could make it
impossible to remove the card or result in damage.

◎ Do not touch the terminal part of a microSD memory card.

Removing the microSD Memory Card

◎ Do not remove the microSD memory card forcefully. Doing so may result

in damage or data loss.

◎ The microSD memory card may become warm after a long time use, but

this is not a fault.

microSD memory
card slot

Metal part up

shl24_e.book 10 ページ ２０１４年１月３０日　木曜日　午前９時６分

11

An IMEI (international mobile station equipment identity) is a special
identification code assigned to each phone. You can pull the IMEI tray out to
confirm the IMEI of the product.

A Turn the product off and remove the microSD memory

card.

For details on removing the microSD memory card, refer to “Removing the
microSD Memory Card” (zP.10).

B Slowly pull the IMEI tray straight out by hooking a finger on

it.

When you purchase the product, the internal battery is not fully charged. Be
sure to charge the internal battery before use.

• If the performance of the battery does not recover (e.g. the usable time after

each charge has become extremely short), the internal battery may be at the
end of service life. On the home screen, tap [APPS] [[Settings] [[Device
info] [[Status] [[Battery status] to check the charging performance of the
internal battery.

• While charging, the charging/incoming indicator illuminates in red, and the

battery icon is displayed with superimposed. When the battery is
charged to approximately 95%, the charging/incoming indicator illuminates
in green. When charging is finished, the charging/incoming indicator goes
out.

Checking the IMEI

◎ The IMEI is information required when requesting servicing or repairs.
◎ The IMEI tray cannot be removed from the main unit. Take care not to

apply force when handling.

◎ You can also operate the product to confirm the IMEI.

On the home screen, tap [APPS] [[Settings] [[Device info]
[[Status] and confirm the IMEI field.

Charging

Charging

◎ Depending on the operation procedure and usage environment, the

temperature inside the product may get high and the product may even
get heated. In such case, charging may stop for security reasons.

◎ Charging the internal battery while using the camera function etc. may

lengthen the charging time.

◎ If you perform various operations with a specified charger (sold

separately) connected to the product, charging/discharging may take
place repeatedly in a short time. Frequently charging the internal battery
shortens its service life.

◎ If you charge the internal battery when the battery has run out, the

charging/incoming indicator may not illuminate soon. However, charging
is in progress.

◎ If the charging/incoming indicator flashes in red, force the power off

(zP. 14) and turn the product on again. If the indicator continues to flash,
stop charging the internal battery and contact an au shop or the Keitai
Guarantee Service Center.

◎ If you stop charging while the charging/incoming indicator still illuminates

during charging, the cell phone may be left not fully charged even if
is displayed on it. In such case, the usage times shorten.

IMEI tray

microSD memory
card slot

shl24_e.book 11 ページ ２０１４年１月３０日　木曜日　午前９時６分

12

The followings are the explanation of how to connect the common AC adapter
04 (sold separately)/common DC adapter 03 (sold separately) to charge. For
details on the specified AC adapter (sold separately)/specified DC adapter
(sold separately), refer to “Introduction of Peripheral Devices” (zP.19).

A Confirm the direction of the microUSB plug of the common

AC adapter 04 (sold separately)/common DC adapter 03
(sold separately) and insert it in the direction of the arrow
to the external connection jack of the product.

B Plug the common AC adapter 04 (sold separately) power

plug into a 100 V AC power outlet/Plug the common DC
adapter 03 (sold separately) plug into a cigarette lighter
socket.

C When charging is finished, pull the microUSB plug of the

common AC adapter 04 (sold separately)/common DC
adapter 03 (sold separately) straight out from the external
connection jack of the product.

D Unplug the common AC adapter 04 (sold separately) power

plug from the power outlet/Unplug the common DC adapter
03 (sold separately) plug from the cigarette lighter socket.

Charging with the Specified AC Adapter (Sold
Separately)/Specified DC Adapter (Sold
Separately)

◎ Although you can charge the internal battery while the power is turned on,

charging time lengthens.

External
connection jack

Protruding edges

Common AC adapter 04 (sold separately)/
Common DC adapter 03 (sold separately)

Common DC adapter
03 (sold separately)

Common AC adapter
04 (sold separately)

shl24_e.book 12 ページ ２０１４年１月３０日　木曜日　午前９時６分

13

The followings are the explanation of how to charge the internal battery by
connecting the product to a USB port of a PC through which the battery can be
charged.

A Connect the microUSB cable 01 (sold separately) to a USB

port of a PC after the PC is activated completely.

B Connect the microUSB cable 01 (sold separately) to the

product after the product is activated completely.

Charging with a PC

◎ If you use the microUSB cable to charge the internal battery, it may take

the internal battery longer to be fully charged than if you use the specified
AC adapter (sold separately).

◎ Turn the protruding side of the microUSB plug down and insert the

microUSB plug to the external connection jack of the product straightly.
Inserting the microUSB plug in the wrong direction may result in damage
to the external connection jack of the product.

◎ The product is turned on when it is connected to a PC while the power is

turned off.

◎ If you charge the internal battery when the battery has run out, the

charging/incoming indicator may not illuminate. In such case, use the
specified AC adapter (sold separately) for charging.

External
connection jack

Protruding edges

USB port of a PC

microUSB cable 01
(sold separately)

shl24_e.book 13 ページ ２０１４年１月３０日　木曜日　午前９時６分

14

■ Turning the Power On

A f (hold down for at least 2 seconds).

■ Turning the Power Off

A f (hold down for at least 2 seconds).
B [Power off] [[OK].

■ Restarting the Product

You can restart the product after turning it off.

A f (hold down for at least 2 seconds).
B [Reboot] [[OK].

■ Turning the Power Off Forcibly

You can force the product to turn off if the screen freezes or you are unable to
turn the product off.

A f (hold down for at least 8 seconds).

Release your finger after the product vibrates to turn the power off.

■ Booting in Safe Mode

Turn the product off then boot it in a state close to that at time of purchase.
If operation of the product is unstable, it may be due to applications installed
after purchasing the product. If symptoms improve when booted in safe mode,
uninstalling the applications you installed may remedy symptoms.

A f (hold down for at least 2 seconds).
B Long touch “Power off” [[OK].

“Safe mode” is displayed at the bottom of the screen when the product is
booted in safe mode.
To end safe mode, reboot the product.

Turning the Power On/Off

◎ The initial setting of the touch panel will be executed until “AQUOS

PHONE” disappears from the screen after the power is turned on. Do not
touch the screen, otherwise touch panel operations may not be
performed properly.

◎ If the power is turned off forcibly, unsaved data will be deleted. Do not

turn the power off forcibly unless you cannot operate the product.

◎ When the product is turned off, you can boot it in safe mode by f

(hold down for at least 2 seconds) to turn it on, and then long touching
“d” until the Welcome Sheet (Lock Screen) is displayed after the au
logo disappears.

◎ It is recommended that you back up your data on the product before

booting in safe mode.

◎ Widgets that you yourself created may be deleted.
◎ Safe mode is not a normal state for the product to be booted in. End safe

mode before normal use.

shl24_e.book 14 ページ ２０１４年１月３０日　木曜日　午前９時６分

15

If you press f or no operation is made for a specified time, the screen is
turned off.

■ Turning the Screen On

A f while the screen is turned off.

The Welcome Sheet (Lock Screen) is displayed if you turn the screen on.

Slide “ ” to the bottom of the screen to unlock.
Tap, long touch or slide “ ” up to display “Video tutorial”, “Welcome sheet
setting” and shortcuts.

A Wallpaper
B Owner info key

Tap to display texts according to items set for “Owner info” in “Lock &
Security”.

C Info Are a

Flick to the left/right to switch the weather, stock prices information, widgets,
media information and date and time.

You can switch the display language for function names and other items to
English.

A On the home screen, [アプリ] (APPS).
B [設定] (Settings).
C [言語と文字入力] (Language & input).
D [言語(Language)を選択] (Select language).
E [English].

Turning the Screen On/Off

◎ When you put the product in your pocket, bag, etc., turn the screen off.

Putting the product in while the screen is turned on may cause
inadvertent operations.

Welcome Sheet (Lock Screen)

Switching the Display Language to
English

《Welcome Sheet (Lock Screen)》

shl24_e.book 15 ページ ２０１４年１月３０日　木曜日　午前９時６分

16

The 3-Line Home is a home screen which consists of the Apps Sheet, the
Widgets Sheet and the Shortcuts Sheet. You can use the function by tapping
an icon/a widget/shortcut on each sheet.

• You can switch each sheet by tapping “APPS”, “WIDGETS” or

“SHORTCUTS” on the Sheet Switcher, or sliding/flicking the home screen to
the left/right.

■ Viewing the 3-Line Home

A Status bar
B Sheet Switcher

Long touch Sheet Switcher, drag it to the destination and release your finger
to move it.

C Apps Sheet/Widgets Sheet/Shortcuts Sheet
D Navigation Bar
E Scroller

Displayed when the screen is scrolled. You can scroll the screen by sliding
the displayed scroller up/down.

F Separator

Pinch out vertically on the home screen to add a separator. You can delete
the separator by pinching it in vertically.

G Social Board

Confirm information for registered SNS.

■ Arranging the Home Screen

A When the top of any sheet of the home screen is displayed,

slide the sheet down.

Alternatively, tap “e” on any sheet.

B [Home settings].

Using the 3-Line Home

◎ A separator cannot be added if there are no applications, etc. between

separators.

Switching sheets

shl24_e.book 16 ページ ２０１４年１月３０日　木曜日　午前９時６分

17

The notification icons to notify you of a missed call, a new mail message, a
running operation, etc. are displayed on the left side of the status bar, while the
status icons to show the status of the product are on the right side.

■ Main Notification Icons

■ Main Status Icons

Using the Status Bar

Icons

Icon Description

Missed call
New mail message (E-mail)
New mail message (SMS)
New mail message (PC-mail)
New mail message (Gmail)
Making a call, talking, receiving a call
Call on hold
Answering memo
Space on the internal memory available less than approx. 275
MB
Reading the internal memory/a microSD memory card
Installation of application completed, update available
Software update available
Icons collected

◎ Some icons are displayed with their number superimposed on them.

Icon Description

Time

〜 Battery level

〜 : Battery level display : No battery

• While charging, the battery icon is displayed with

superimposed.

Airplane mode set

〜 Signal strength (Receiving electric field)

〜 : Level display : Out of service area

• The icon indicating network is displayed at the upper left.

• During a communication, the icon is displayed with

superimposed.

Manner mode status

: Standard manner mode : Drive manner mode

: Silent manner mode
During a call using hands-free
Microphone set to “Mute” during a call
Answering memo set

: No Answering memo : Answering memo (one to

nine entries) : Answering memo (ten entries)

shl24_e.book 17 ページ ２０１４年１月３０日　木曜日　午前９時６分

18

In the notification/status panel, you can check the details on notification icons
and status icons or activate an application corresponding to the icon.
You can also set the manner mode, VeilView, etc.

A Slide the status bar down.

A Function buttons

Switch settings of the frequently used function by one touch.

B Function button displaying/hiding bar

Tap it to display/hide function buttons on the second and subsequent
row.

C Music controller

Play music with LISMO.

D Notification area

Check the status of the product and contents of notifications.
Depending on the information, you can pinch out/pinch in to enlarge/
shrink notifications or tap notifications/functions to activate a
corresponding application.

• Flick a notification to the left/right to delete it. You may not be able to

delete a notification depending on the notification.

E Settings key

Tap it to make various settings for the product.

F Rearrange key

Sort function buttons.

G Clear

Tap it to clear all the notifications. You may not be able to delete a
notification depending on the notification.

H Close bar

Slide it up to hide the notification/status panel.

You can switch input methods for character entry.

• Following operation explanations use “Japanese - iWnn IME - SH edition”.

A While the keyboard is displayed, open the notification

panel.

B [Choose input method] [[English (US)]/[Japanese].

A On the character entry screen, [ ] [[Change input UI]

[[Set QWERTY keyboard]/[Set 12 keyboard].

Using the Notification/Status Panel

Switching Input Methods

Switching Software Keyboards

《Notification/Status panel》

shl24_e.book 18 ページ ２０１４年１月３０日　木曜日　午前９時６分

19

■ au Carrying Case F Black (0105FCA) (sold separately)

au Carrying Case G Black (0106FCA) (sold separately)

■ Common AC Adapter 03 (0301PQA) (sold separately)

Common AC Adapter 04 (0401PWA) (sold separately)
Common AC Adapter 03 Navy (0301PBA) (sold separately)
Common AC Adapter 03 Green (0301PGA) (sold separately)
Common AC Adapter 03 Pink (0301PPA) (sold separately)
Common AC Adapter 03 Blue (0301PLA) (sold separately)
AC Adapter JUPITRIS (White) (L02P001W) (sold separately)
AC Adapter JUPITRIS (Red) (L02P001R) (sold separately)
AC Adapter JUPITRIS (Blue) ( L02P001L) (sold separately)
AC Adapter JUPITRIS (Pink) (L02P001P) (sold separately)
AC Adapter JUPITRIS (Champagne) (L02P001N) (sold
separately)

• Illustrations and forms may not match depending on the AC adapter you

use.

■ Common DC adapter 03 (0301PEA) (sold separately)

■ Portable charger 02 (0301PFA) (sold separately)

■ microUSB cable 01 (0301HVA) (sold separately)

microUSB cable 01 Navy (0301HBA) (sold separately)
microUSB cable 01 Green (0301HGA) (sold separately)
microUSB cable 01 Pink (0301HPA) (sold separately)
microUSB cable 01 Blue (0301HLA) (sold separately)

Introduction of Peripheral Devices

◎ For the latest information about available peripheral devices, check the

au homepage (http://www.au.kddi.com/english/) or contact Customer
Service Center.

◎ The product does not support ASYNC/Fax transmission.
◎ The above-mentioned peripheral devices can be purchased from au

Online Shop.

(http://auonlineshop.kddi.com/)

au Carrying Case F Black

Common AC adapter 04

shl24_e.book 19 ページ ２０１４年１月３０日　木曜日　午前９時６分

20

Before you assume that the product is malfunctioning, check the following:

If symptoms do not improve after checking each of the above, information is
provided through au Customer Support on the au homepage below.

(http://www.au.kddi.com/english/support/)

Troubleshooting

Trouble Detail
Battery usage time is
short.

• Make sure you do not often use the product in

places where (out of service area) is
displayed. (zP. 17)

• Make sure the internal battery does not

approach the end of its service life. Check the
battery status. (zP.11)

• Is the internal battery charged enough? (zP.11)

• Suspend the functions not being used. (zP.18)

Cannot make calls. • Is an au Nano IC Card (LTE) inserted? (zP. 7)

• Is the power turned on? (zP.14)

Cannot receive calls. • Is reception good enough? (zP. 17)

• Is the product within the service area? (zP. 17)

• Is the power turned on? (zP.14)

• Is an au Nano IC Card (LTE) inserted? (zP. 7)

Cannot hear the other
party.

• Make sure you are not covering the earpiece

with your ear.

Place the earpiece over your earhole.
Cannot recognize a
microSD memory card/
Cannot find target data.

• Is a microSD memory card inserted properly?

(zP. 10)

• Make sure data is not saved on the internal

memory. Data can be saved on the internal

memory besides a microSD memory card.
Cannot operate the
keys/touch panel.

• Turn off the power and then turn it on.

• Is the power turned on? (zP.14)

Cannot charge the
battery.

• Is the power plug of the specified charger (sold

separately) securely plugged into an outlet or a

cigarette lighter socket? (zP.11)
Cannot turn on the
power.

• Is the internal battery charged? (zP.11)

• Did you hold f down? (zP. 14)

Cannot operate/The
screen does not
respond/Cannot turn off
the power.

• You can force the power off by holding down

f for at least 8 seconds and releasing your

finger after the product vibrates. Turn the

product on again after a while. (zP. 14)
Cannot operate the
touch panel as
intended.

• Make sure you are not operating with hands

wearing gloves etc.

• Make sure you are not operating with the tip of a

fingernail or with foreign object between the

screen and your fingers.

• Restart the product. (zP.14)

Screen response is
slow when you tap on
the screen/press the
keys.

• Screen response may be slowed down when a

large amount of data is stored in the product or

being transmitted between the internal memory

and a microSD memory card.
auIC card(UIM) error. is
displayed.

• Is an au Nano IC Card (LTE) inserted? (zP. 7)

The power is turned off
automatically.

• Make sure the battery has not run out. (zP.11)

The power is turned off
while the wake-up logo
is displayed.

• Make sure the battery has not run out. (zP.11)

(out of service area

icon) is displayed.

• Is reception good enough? (zP. 17)

• Is the product within the service area? (zP. 17)

• Is your hand off the area around the internal

antenna? (zP. 7)
A message indicating
that charging is
necessary is displayed.

• The battery is almost empty. (zP.11)

When making a call, a
beeping sound is heard
from the earpiece and
a connection cannot be
established.

• Is reception good enough? (zP. 17)

• Is the product within the service area? (zP. 17)

• The wireless line is busy or the other party is on

another line. Try again later.

shl24_e.book 20 ページ ２０１４年１月３０日　木曜日　午前９時６分

21

The product supports the software update.

A On the home screen, [APPS] [[Settings] [[Device info]

[[Software update].

B

■ Notes on Software Update

• You are charged for data communication when connecting to the Internet

from the product by using packet communication.

• When software update is necessary, you will be informed on au homepage,

etc. For details, contact an au shop or Customer Service Center (call toll-free

157). In addition, users of the SHL24 will receive a notice from au, when
software update is necessary to improve the functionality of the SHL24.

• It is recommended to back up your data before updating software.

• If the software update is performed, the product will restart before and after

the update.

• If the software update has failed or stopped, perform the same procedures

again.

• If the software update fails, it may become impossible to operate the product.

If this happens, bring it to an au shop or PiPit (not accepted by some shops).

• Charge the battery sufficiently before starting update. If the battery level is

insufficient or the battery runs out during the update, the software update will
fail.

• Check out the signal reception status. The software update may fail if the

product is in a place with bad signal reception status.

• Various data registered on the product (address books, mails, still pictures,

music data, etc.) and information of settings will not be changed even after
software is updated. However, note that data may not be protected
depending on the state of the product (fault, damage, getting wet with water,
etc.).

• After software is updated, the download of next update software may

automatically start (consecutive update).

• The software update is not available during international roaming.

Do not conduct the following operations during the software update

• Do not move during software update.

The following operations are not available during the software update

• Operations are not available during software update. Making a call to 110

(Police), 119 (Fire and Ambulance), 118 (Regional Coast Guard
Headquarters) or 157 (Customer Service Center) is not available either. Also,
the alarm etc. does not function.

Updating Software

Software
update

Check whether software update is necessary or not.
The confirmation starts when you tap “Yes”. When it is

necessary, you can download data for software update.
Auto-check
settings

Set whether to regularly check presence of data for

software update available.

shl24_e.book 21 ページ ２０１４年１月３０日　木曜日　午前９時６分

22

■ When Asking for Repair

For repair, contact Keitai Guarantee Service Center.

■ Performance Parts for Repair

The Company retains performance parts for repair of the SHL24 main unit and
its peripheral devices for 4 years after discontinuation of production.
“Performance parts for repair” refers to parts required for maintaining the
functions of the product.

■ Warranty Card

At the store of purchase, thoroughly check and read the name of the retailer,
date of purchase and other necessary details filled in on the warranty card,
and be sure to keep it in a safe place.

■ Keitai Guarantee Service Plus LTE

An after-sales service membership program on a monthly basis called “Keitai
Guarantee Service Plus LTE” (monthly fee: 380 yen excluding tax) is available
for using your au cell phone for a long time without worries.
This service expands coverage for many troubles including malfunction, theft
and loss. For details of this service, check on the au homepage or contact
Keitai Guarantee Service Center.

■ au Nano IC Card (LTE)

The au Nano IC Card (LTE) is lent to you by au. In case of loss or damage, the
card will be replaced at your expense. When malfunction is suspected, or in
case of theft or loss, contact an au shop or PiPit.

After-Sales Service

During the
warranty period

Repairs will be done based on the <<terms of services
of the free-of-charge repair warranty>> described on the

warranty card.
Outside the
warranty period

We shall repair the product for a charge as requested by

the customer if repair renders it usable.

◎ Before handing in the product for repair, make a backup of the contents

of memory since they may disappear during repair. Note that the
Company shall not be liable for any damages and loss of income should
the contents of memory be altered or lost.

◎ Recycled parts that meet the Company’s quality standards are

sometimes used for repair.

◎ au cell phones collected by Replacement cell phone delivery service

which you used before are recycled to cell phones for replacement after
repairs. Also parts replaced by au after-sales service are collected and
recycled by the Company. They are not returned to customers.

◎ You can apply for membership only at the time of purchasing your au cell

phone.

◎ Once you cancel the membership, you cannot reapply for it until you

purchase an au cell phone next time.

◎ Note that when changing the model or purchasing an extra cell phone,

this service only covers the most recently purchased au cell phone.

◎ When an au cell phone is handed over to you or someone else, the “Keitai

Guarantee Service Plus LTE” membership is also handed over to the
successor of the cell phone.

◎ When you get a new au cell phone by changing the model, purchasing

an extra cell phone, etc., the “Keitai Guarantee Service Plus” or “Keitai
Guarantee Service Plus LTE” membership for the old au cell phone is
automatically canceled.

◎ Service contents are subject to change without notice.

shl24_e.book 22 ページ ２０１４年１月３０日　木曜日　午前９時６分

23

■ After-Sales Service

If you are unsure about anything regarding after-sales service, contact the
following service counter.

Customer Service Center (for service canceling procedure or operation in
case of loss or theft)

From a fixed-line phone,  0077-7-113 (toll free)
From an au cell phone, 113 without area code (toll free)

Keitai Guarantee Service Center (for loss, theft or damage)

From a fixed-line phone/an au cell phone,

0120-925-919 (toll free)

Business hours 9:00 to 21:00 (7 days a week)

■ au After-Sales Service Information

* All the prices written a bove exclude tax.

Service contents

Keitai Guarantee
Service Plus LTE

member

Non-Keitai

Guarantee Service

Plus LTE member
Replacement cell phone
delivery service
(spontaneous failure: 1st year)

Free N/A

Replacement cell phone
delivery service
(spontaneous failure: 2nd year
and later)

Customer charge

1st: 5,000 yen

2nd: 8,000 yen

N/A

Replacement cell phone
delivery service
(partial damage, water soak,
irreparable damage, theft and
loss)

Customer charge

1st: 5,000 yen

2nd: 8,000 yen

N/A

Holding over and repair
(spontaneous failure: 1st year)

Free Free

Holding over and repair
(spontaneous failure: 2nd year
and later)

Free (three-year

warranty)

Actual cost

Holding over and repair
(partial damage)

Customer charge
Upper limit: 5,000

yen

Actual cost

Holding over and repair
(water soak and irreparable
damage)

Customer charge

10,000 yen

Actual cost

Holding over and repair
(theft and loss)

N/A

N/A

(By model

replacement)

Replacement cell phone delivery service

◎ When you have trouble with your au cell phone, you can have a cell

phone for replacement (same model and color as your old one) delivered
to any destination that you specify by calling us. Please return your old
faulty au cell phone within 14 days after the cell phone for replacement is
delivered to you.

◎ You can use this service up to twice within one year starting from the day

when you first use this service. If you have not used this service over the
past one year at the time of your application for this service, the
application will be regarded as your first time. If you have, the application
will be regarded as your second time.

* For details, check on the au homepage.

Holding over and repair

◎ Damages and malfunctions intentionally caused by the customer as well

as those due to modification (e.g. disassembly, change of parts, painting,
etc.) by the customer are not covered by this service.

◎ You cannot receive a refund for replacement of the outer casing due to

stains, scratches, paint removal, etc. on the outer casing.

shl24_e.book 23 ページ ２０１４年１月３０日　木曜日　午前９時６分

24

*1 The 1Seg conti nuous watching time varies depending on the usage.
*2 It changes a ccording to objects obstructing devices and signal reception.
*3 This is the specification provided in Bluetooth

®

standards for making

communication between Bluetooth

®

-compatible devices in accordance with their

intended use.

*4 Some contents of address books data may not be properly di splayed on the

device of the other party.

*5 This profil e supports Bluetooth

®

Standard Ver.4.0.
*6 Supported for s ome car navigation systems only. See the au h omepage for usage.
*7 Supported for Wi-Fi CERTIFIED

™

ac. Refer to the respective companies’ websites

for information on supported products.

Main Specifications

Display Approx. 4.5 inches, approx. 16.77 million colors, IGZO,

1,080×1,920 (FHD)

Weight Approx. 115 g (including the internal battery)
Size (W×H×D) Approx. 63 mm×124 mm×9.9 mm (thickest part approx.

10.3 mm)

Memory (built-in) ROM: Approx. 16 GB

RAM: Approx. 2 GB
Continuous talk
time (in Japan)

Approx. 980 min.

Continuous talk
time (overseas
(GSM))

Approx. 620 min.

Continuous
standby time (in
Japan)

Approx. 510 hours (while LTE is used)

Approx. 610 hours (while 3G is used)

Continuous
tethering time

Approx. 420 min. (LTE on WAN)

Approx. 600 min. (3G on WAN)
Maximum Wi-Fi®

tethered
connections

10 devices

Continuous
standby time
(overseas (GSM))

Approx. 600 hours

Charging time Common AC adapter 04 (sold separately): Approx. 120

min.

Common DC adapter 03 (sold separately): Approx. 260

min.
1Seg continuous

watching time

*1

Approx. 8 hours and 00 min. (earphone)

Approx. 7 hours and 30 min. (speaker)
Camera device Out camera

CMOS image sensor

In camera

CMOS image sensor

Effective pixels Out camera

Approx. 13.10 million pixels

In camera

Approx. 1.20 million pixels
Bluetooth®
function

Communication method: Bluetooth® Standard Ver.4.0
Output: Bluetooth

®

Standard Power Class 2

Communication distance

*2

: Within 10 m with no
obstacles in the range
Compatible Bluetooth

®

profiles*3: HSP (Headset Profile),
HFP (Hands-Free Profile), A2DP (Advanced Audio
Distribution Profile), AVRCP (Audio/Video Remote
Control Profile) Ver.1.3, OPP (Object Push Profile), SPP
(Serial Port Profile), PBAP (Phone Book Access
Profile)

*4

, HID (Human Interface Device Profile), HDP
(Health Device Profile), PAN (Personal Area Networking
Profile), PXP (Proximity Profile)

*5

, FMP (Find Me

Profile)

*5

, ANP (Alert Notification Profile)*5, PASP (Phone
Alert Status Profile)

*5

, TIP (Time Profile)*5, DUN (Dial-up

Networking Profile)

*6

Frequency bands: 2.4 GHz band

Network
environment

Wireless LAN (Wi-Fi®) function: IEEE 802.11a/b/g/n (2.4
GHz/5 GHz)/ac

*7

conformant

Interface microUSB jack, 3.5φ (quadrupoles) earphone/

microphone jack (supported earphones: tripolar
headphone (Lch/Rch/GND) and quadrupolar earphone
with microphone (Lch/Rch/GND/MIC))

◎ The continuous talk time and continuous standby time may drop to less

than half depending on the battery charging status, usage environment
such as temperature, reception condition at the location where the
product is used, and the function settings.

shl24_e.book 24 ページ ２０１４年１月３０日　木曜日　午前９時６分

25

This model 【SHL24】 mobile phone complies with Japanese technical
regulations and international guidelines regarding exposure to radio waves.
This mobile phone has been designed in observance of the Japanese
technical regulations regarding exposure to radio waves (*1) and limits to
exposure to radio waves recommended by equivalent international guidelines.
These international guidelines were set out by the International Commission on
Non-Ionizing Radiation Protection (ICNIRP), which is in collaboration with the
World Health Organization (WHO), and the permissible limits include a
substantial safety margin designed to assure the safety of all persons,
regardless of age and health condition. The Japanese technical regulations
and international guidelines define the limits using a unit of measurement
known as the Specific Absorption Rate (SAR), which represents the average
amount of radio frequency energy absorbed by the human head. The SAR limit
for mobile phones is 2.0 W/kg. The highest SAR value for this mobile phone
when tested for use at the ear is 0.473 W/kg. There may be slight differences in
SAR levels among individual products, but they all satisfy the limit. The actual
SAR of this mobile phone while talking on the phone can be well below that
indicated above. This is due to automatic changes in the power level of the
mobile phone to ensure it only outputs the minimum power required to
communicate with a base station. Therefore in general, the closer you are to a
base station, the lower the power output of the mobile phone.
This mobile phone can be used in positions other than against your ear. This
mobile phone satisfies the international guidelines when used with au Carrying
Case F Black (0105FCA) (sold separately)/au Carrying Case G Black
(0106FCA) (sold separately) recommended by KDDI (*2).
In case you are not using the au Carrying Case F Black (0105FCA) (sold
separately)/au Carrying Case G Black (0106FCA) (sold separately), use a
product that contains no metal parts, and one that can hold the mobile phone
at least 1.5 cm away from your body.
The World Health Organization has stated that “a large number of studies have
been performed over the last two decades to assess whether mobile phones
pose a potential health risk. To date, no adverse health effects have been
established as being caused by mobile phone use”. If you would like to know
more detailed information, please refer to the WHO website.
(http://www.who.int/docstore/peh-emf/publications/facts_press/
fact_english.htm)
Please refer to the websites listed below if you would like to know more
detailed information regarding SAR.

*1 Technical regulati ons are defined by the Ministerial Ordinance Related to the Radio

Law (Article 14-2 of Radio Equipment Regulations ).

*2 Regarding the method of measuring SAR when using mobile phon es in positions

other than against the ear, international standards (IEC6 2209-2) were set in March
of 2010.
On the other hand, regarding the technical stand ards of Japan, ministerial
ordinance to revise part of the Ministerial Ordinance related to Radio Law (Article
14-2 of Radio Equipment Regulations) has been issued in Au gust 2013, and will be
enforced on April 1, 2014.

Specific Absorption Rate (SAR) of Cell
Phones

○ Ministry of Internal Affairs and Communications website:

(http://www.tele.soumu.go.jp/e/sys/ele/index.htm)

○ Association of Radio Industries and Businesses website:

(http://www.arib-emf.org/index02.html)

○ au hom epage:

(http://www.au.kddi.com/english/)

○ SHARP homepage:

(http://www.sharp.co.jp/products/menu/phone/cellular/sar/index.html)

shl24_e.book 25 ページ ２０１４年１月３０日　木曜日　午前９時６分

26

In some countries/regions including Europe, there are restrictions on the
use of 5GHz WLAN that may limit the use to indoors only.
If you intend to use 5GHz WLAN on the device, check the local laws and
regulations beforehand.

■ Mobile Light

Do not point the illuminated light directly at someone’s eyes.

Be especially careful not to shoot small children from a very close distance.
Do not use Mobile light near people’s faces. Eyesight may be temporarily
affected leading to accidents.

■ AC Adapter

Any AC adapter used with this handset must be suitably approved with a 5Vdc
SELV output which meets limited power source requirements as specified in
EN/IEC 60950-1 clause 2.5.

■ Battery - CAUTION

■ Volume Level Caution

■ Headphone Signal Level

The maximum output voltage for the music player function, measured in
accordance with EN 50332-2, is 120 mV.

■ European RF Exposure Information

Your mobile device is a radio transmitter and receiver. It is designed not to
exceed the limits for exposure to radio waves recommended by international
guidelines. These guidelines were developed by the independent scientific
organization ICNIRP and include safety margins designed to assure the
protection of all persons, regardless of age and health.

The guidelines use a unit of measurement known as the Specific Absorption
Rate, or SAR. The SAR limit for mobile devices is 2 W/kg and the highest SAR
value for this device when tested at the ear is 0.287 W/kg

*

and when worn on

the body is 0.274 W/kg

*

.

For body-worn operation, this mobile device has been tested and meets the RF
exposure guidelines when used with an accessory containing no metal and
positioning the handset a minimum of 1.5 cm from the body. Use of other
accessories may not ensure compliance with RF exposure guidelines.

As SAR is measured utilizing the devices highest transmitting power the actual
SAR of this device while operating is typically below that indicated above. This
is due to automatic changes to the power level of the device to ensure it only
uses the minimum level required to reach the network.

The World Health Organization has stated that present scientific information
does not indicate the need for any special precautions for the use of mobile
devices. They note that if you want to reduce your exposure then you can do
so by limiting the length of calls or using a hands-free device to keep the
mobile phone away from the head.

CE Declaration of Conformity

Hereby, Sharp Telecommunications of Europe Ltd, declares that this
SHL24 is in compliance with the essential requirements and other relevant
provisions of Directive 1999/5/EC.
A copy of the original declaration of conformity can be found at the
following Internet address:

(http://www.sharp.co.jp/k-tai/)

Use specified Charger only.

Non-specified equipment use may cause malfunctions, electric shock or fire
due to battery leakage, overheating or bursting.

The battery is embedded inside the product. Avoid removing the embedded
battery since this may cause overheating or bursting.

Do not dispose of the product with ordinary refuse. Take the product to an au
Shop, or follow the local disposal regulations.

Charge battery in ambient temperatures between 5°C and 35°C; outside this
range, battery may leak/overheat and performance may deteriorate.

To prevent possible hearing damage, do not listen at high volume
levels for long periods.

* The tests are carried out in accordance with international guideline s for testing.

shl24_e.book 26 ページ ２０１４年１月３０日　木曜日　午前９時６分

27

- This device complies with part 15 of the FCC Rules. Operation is subject to
the following two conditions:
(1) This device may not cause harmful interference, and (2) this device must
accept any interference received, including interference that may cause
undesired operation.

- Changes or modifications not expressly approved by the manufacturer
responsible for compliance could void the user’s authority to operate the
equipment.

■ Information to User

This equipment has been tested and found to comply with the limits of a Class
B digital device, pursuant to Part 15 of the FCC Rules. These limits are
designed to provide reasonable protection against harmful interference in a
residential installation. This equipment generates, uses and can radiate radio
frequency energy and, if not installed and used in accordance with the
instructions, may cause harmful interference to radio communications.

However, there is no guarantee that interference will not occur in a particular
installation; if this equipment does cause harmful interference to radio or
television reception, which can be determined by turning the equipment off
and on, the user is encouraged to try to correct the interference by one or more
of the following measures:

1. Reorient/relocate the receiving antenna.

2. Increase the separation between the equipment and receiver.

3. Connect the equipment into an outlet on a circuit different from that to

which the receiver is connected.

4. Consult the dealer or an experienced radio/TV technician for help.

■ 5 GHz WLAN Operation in USA

Within the 5.15-5.25 GHz band, UNII devices are restricted to indoor
operations to reduce any potential for harmful interference to co-channel
Mobile Satellite Services (MSS) operations.

■ FCC RF Exposure Information

Your handset is a radio transmitter and receiver. It is designed and
manufactured not to exceed the emission limits for exposure to radio
frequency (RF) energy set by the Federal Communications Commission of the
U.S. Government.

The guidelines are based on standards that were developed by independent
scientific organizations through periodic and thorough evaluation of scientific
studies. The standards include a substantial safety margin designed to assure
the safety of all persons, regardless of age and health.

The exposure standard for wireless handsets employs a unit of measurement
known as the Specific Absorption Rate, or SAR. The SAR limit set by the FCC is

1.6 W/kg.

Highest SAR value:

This device was tested for typical body-worn operations with the back of the
handset kept 1.0 cm from the body. To maintain compliance with FCC RF
exposure requirements, use accessories that maintain a 1.0 cm separation
distance between the user’s body and the back of the handset. The use of belt
clips, holsters and similar accessories should not contain metallic components
in its assembly.

The use of accessories that do not satisfy these requirements may not comply
with FCC RF exposure requirements, and should be avoided.

The FCC has granted an Equipment Authorization for this model handset with
all reported SAR levels evaluated as in compliance with the FCC RF emission
guidelines. SAR information on this model handset is on file with the FCC and
can be found at (http://transition.fcc.gov/oet/ea/fccid/) under the Display Grant
section after searching on the corresponding FCC ID (see table above).

Additional information on Specific Absorption Rates (SAR) can be found on the
FCC website at (http://www.fcc.gov/encyclopedia/radio-frequency-safety).

FCC Notice

Model SHL24
FCC ID APYHRO00201
At the Ear 1.01 W/kg
On the Body 0.91 W/kg

shl24_e.book 27 ページ ２０１４年１月３０日　木曜日　午前９時６分

Be sure to read this manual before use

NotesonUsage

•

In this manual, the “AQUOS PHONE SERIE mini SHL24” is abbreviated as

the “SHL24” or the “product”.

•

In this manual, “microSD

™

memory card (commercially available)”,

“microSDHC

™

memory card (commercially available)” and “microSDXC™
memory card (commercially available)” are abbreviated as “microSD
memory card” or “microSD”.

•

For illustrations and descriptions in this manual, refer to “Basic Manual”

available on the au homepage and on the product.

February2014,1stEdition

shl24_pl_e.book 0 ページ ２０１４年１月３０日　木曜日　午後３時５５

分

- 1 -

• The Company is not liable for any damages arising from earthquakes,

lightning, storms, floods or other natural disasters, as well as fires, actions by
third parties, other accidents, intentional or mistaken operation by the
customer, or use under other unusual conditions outside the responsibility of
the Company.

• The Company is not liable for any incidental damages (change/

disappearance of saved content, loss of business income, disruption of
business, etc.) arising from use of or inability to use the product.
It is recommended that you keep a copy of important phone numbers etc.

• The Company is not liable for any damages arising from failure to observe

the described content of this manual.

• The Company is not liable for any damages arising, for example, from

malfunction caused by combination with connected devices or software not
related to the Company.

• Captured image data or downloaded data may sometimes be altered or lost

due to faults, repair or other handling of the product. The Company is not
liable for any damage or lost income resulting from recovery of these data.

• It is recommended you keep a copy of important data in your PC’s hard disk,

etc. Whatever the cause of fault or malfunction may be, the Company
assumes no responsibility for alteration or loss of saved information.

* “The Company” as app ears in this manual refers to the following companie s:

Sold by: KDDI CORPORATION, OKINAWA CELLULAR TELEPHONE COMPANY
Manufactured by: SHARP CORPORATION

Exemptions

◎ Reproduction of the content of this manual in part or in whole is

prohibited.

◎ The content of this manual is subject to change without notice.
◎ Every effort has been made in the preparation of this manual. Should you

notice any unclear points, omissions, etc., feel free to contact us.

shl24_pl_e.book 1 ページ ２０１４年１月３０日　木曜日　午後３時５５

分

- 2 -

■ Before using the product, thoroughly read these safety

precautions for proper use. After reading, store the precautions
in a safe place.

These “Safety Precautions” describe instructions that should be observed to
prevent damage to property or injury to the customer or others using the
product.
These instructions are divided into the following categories.

■ Explanation of Indications Used in This Manual

*1 Serious injury: This refers to loss of sight, injury, burns (high- and low-temperature),

electric shock, broken bones, i njuries with residual aftereffects from
poisoning, etc., and injuries requiring hospital admission for
treatment or long-term hospital attendance as an outp atient.

*2 Injury: This refers to injuries, burns (hi gh- and low-temperature), electric shock,

etc. that do not require hospital admission for treatment or long-term
hospital attendance as an outpatient.

*3 Physical d amage: This refers to extended damage to buildings, furniture, livestock

or pets.

Safety Precautions (Observe Strictly)

DANGER

This symbol indicates the potential
and imminent danger of death or
serious injury

*1

to a person.

WARNING

This symbol indicates the possibility
of death or serious injury

*1

to a

person.

CAUTION

This symbol indicates the possibility
of personal injury

*2

to a person or

physical damage

*3

.

shl24_pl_e.book 2 ページ ２０１４年１月３０日　木曜日　午後３時５５

分

- 3 -

■ Explanation of Graphic Symbols Used in This Manual

■ Precautions Common to the Main Unit, Charger, au

Nano IC Card (LTE), Peripheral Devices

Indicates an action that
is not allowed.

Indicates that use in a
place where the
product is likely to get
wet or allowing the
product to get wet is not
allowed.

Indicates that handling
with wet hands is not
allowed.

Indicates an action that
must be done.

Indicates that
disassembly is not
allowed.

Indicates that the power
plug must be
disconnected from the
power outlet.

DANGER

Be sure to read the following
hazards before use.

Be sure to use only the specified peripheral devices. Use of other
peripheral devices might cause overheating, ignition, rupture,
fault, or leakage of liquid.

Do not use, store or leave the product in hot places (e.g. by the
fire, near a heater, under a kotatsu, in direct sunlight, in a car in
the hot sun). Doing so might cause ignition, rupture, fault, fire or
injury.

Prohibited

Wetting
with water
prohibited

Wet hands
prohibited

Instruction

Disassembly

prohibited

Disconnect

plug from

power outlet

Instruction

Prohibited

shl24_pl_e.book 3 ページ ２０１４年１月３０日　木曜日　午後３時５５

分

- 4 -

Before entering an area where flammable gas is generated such
as a gas station, be sure to turn off the product. Do not charge
the battery. Failure to observe these precautions might cause the
gas to catch fire. In addition, when using Osaifu-Keitai

®

payment
function at a gas station, be sure to turn off the power in advance.
(If Osaifu-Keitai

®

has been locked, cancel the lock before turning

off the power.)

Do not put the product in a cooking apparatus such as
microwave oven or a pressure vessel. Doing so might cause
leakage of liquid, ignition, rupture, fault, fire or injury.

Do not throw the product into a fire or heat it. Doing so might
cause ignition, rupture or fire.

Do not short-circuit the external connection jack and the
earphone/microphone jack. Do not allow conductive foreign
objects (metal fragments, pencil leads, etc.) to come into contact
with or get inside a jack. Doing so might cause fire or a fault.

When using a metal accessory etc., do not allow the metal part to
come in contact with the connection jack or power outlet. Doing
so might cause electric shock, ignition, injury or a fault.

Do not expose the camera lens to direct sunlight for an extended
period. Doing so might cause ignition, rupture or fire by the
light-collecting mechanism of the lens.

The customer is not allowed to disassemble, modify or repair the
product. Doing so might cause a fault, ignition, electric shock, or
injury. The Company is not liable even in the event of any
nonconformities arising on the product or peripheral devices as a
result of modification, etc. Modification of the product is in
violation of the Radio Law.

Instruction

Prohibited

Prohibited

Prohibited

Prohibited

Prohibited

Disassembly

prohibited

shl24_pl_e.book 4 ページ ２０１４年１月３０日　木曜日　午後３時５５

分

- 5 -

WARNING

Be sure to read the following
warnings before use.

Do not drop or subject to strong impact, such as throwing. Doing
so might cause rupture, overheating, ignition or a fault.

Do not use outside when you can hear thunder. Doing so might
risk lightning strikes and electric shock.

Do not let your hands, fingers and other parts of the body touch
the external connection jack or earphone/microphone jack. Doing
so might cause electric shock, injury or a fault.

If the product is damaged because it is dropped or something,
and its display is cracked or internal parts are exposed, do not
touch the cracked display or exposed parts with your hands.
Doing so might cause electric shock or injury from damaged
parts. Contact an au shop or Keitai Guarantee Service Center.

Never charge the product when it is wet. Doing so might cause
electric shock or short circuit/corrosion causing fire, a fault or
burns.

Although the product has waterproof capability, do not use if
liquid such as water gets inside the product from the au Nano IC
Card (LTE)/microSD memory card cover etc. Continued use of
the product in this state might cause overheating, ignition or a
fault.

If charging is not completed after the specified charging time,
stop charging. Failure to do so might cause leakage of liquid,
overheating, rupture or ignition.

Do not leave in places within the reach of small children. Small
children might swallow part of the equipment by mistake and
choke on them, or might drop them by mistake and cause
accidents or injury.

Prohibited

Prohibited

Prohibited

Prohibited

Prohibited

Wetting

with water

prohibited

Instruction

Prohibited

shl24_pl_e.book 5 ページ ２０１４年１月３０日　木曜日　午後３時５５

分

- 6 -

CAUTION

Be sure to read the following
cautions before use.

Do not store the product in places subject to direct sunlight (e.g.
in automobiles), places that get hot, places that get extremely
cold, and in humid or dusty places. Doing so might cause
overheating, ignition, deformation or a fault.

Do not leave on unstable places such as rocky stands or tilting
surfaces especially while the vibration mode is set. Dropping the
product may cause injury or damage. Also, pay sufficient
attention to impact, etc.

Do not cover or wrap the product with cloth, bedding, etc. while
using or charging the product. Doing so might cause fire, fault or
injury.

Do not touch the product or specified chargers (sold separately)
for a long time while charging. Doing so might cause
low-temperature burns.

Do not use power outlets or wiring apparatus beyond its rating.
Also, exceeding rating, for example, by connecting multiple
devices to a single power strip might cause overheating and fire.

Do not place near corrosive chemicals or in places where
corrosive gas is generated. Doing so might cause a fault or loss
of internal data.

Stop use if there is smoke, abnormal odor or noise, excessive
overheating, or other abnormalities. During charging, disconnect
the specified charger (sold separately) from the power outlet or
the socket, make sure that the product is not overheating before
turning the power off and contact an au shop or Keitai Guarantee
Service Center. Also, if you have dropped or damaged the
product, do not continue to use it in that state, and contact an au
shop or Keitai Guarantee Service Center.

Prohibited

Prohibited

Prohibited

Prohibited

Prohibited

Prohibited

Instruction

shl24_pl_e.book 6 ページ ２０１４年１月３０日　木曜日　午後３時５５

分

- 7 -

When inserting an earphone, etc. into the product, adjust the
volume to the proper level. Setting too loud a volume or using the
earphone continuously for a long period of time might adversely
affect your ears. Also, raising the volume too high might prevent
you from hearing sounds around you, which might in turn lead to
a traffic accident at a railroad crossing or pedestrian crossing.

When adjusting the volume with an earphone, etc. inserted into
the product, raise the volume a little at a time. If you raise the
volume too much from the outset, sudden loud noise from the
earphone, etc. might adversely affect your ears.

When using a charger or external device, insert/remove the
connector straight to/from the jack. Make sure the orientation of
the connector is correct. Failure to do so might cause damage or
a fault.

When small children use the equipment, have the guardian teach
them the proper handling procedures so as to avoid potential
dangerous situations. In addition, check that they are using the
equipment as directed during use. Failure to do so might cause
injury etc.

Instruction

Instruction

Instruction

Instruction

shl24_pl_e.book 7 ページ ２０１４年１月３０日　木曜日　午後３時５５

分

- 8 -

■ Main Unit

DANGER

Be sure to read the following
hazards before use.

Do not puncture the product with a nail, hit it with a hammer or
step on it.
Doing so might cause leakage, overheating, rupture or ignition of
the internal battery.

WARNING

Be sure to read the following
warnings before use.

Be careful not to have the product bitten by your pet.
Failure to do so might cause leakage, overheating, rupture or
ignition of the internal battery.

Do not use a cell phone while driving a car or riding a motorbike
or bicycle. Doing so may cause a traffic accident. Use of a cell
phone while driving a car or motorbike is prohibited by law. Use
of a cell phone while riding a bicycle may be punishable by some
regulations.

Turn off the product while you are aboard an airplane.
Otherwise, the product may affect electronic devices and safety
of your flight may be compromised. If your cell phone is permitted
to be used on an airplane, use it appropriately by following
instructions from the airline company. Do not connect the product
with a PC aboard an airplane using the microUSB cable 01 (sold
separately), since the product is automatically turned on.

The product sometimes affects high-precision electronic devices.
So, turn it off near such devices. (Examples of electronic devices
that might be affected by the product include cardiac
pacemakers, hearing aids, other electronic medical devices, fire
alarms, and automatic doors. If you are using an electronic
medical device, contact the device manufacturer or retailer for
information about the possible effects of radio waves.)

Prohibited

Instruction

Prohibited

Instruction

Instruction

shl24_pl_e.book 8 ページ ２０１４年１月３０日　木曜日　午後３時５５

分

- 9 -

When using the product near an implanted pacemaker,
implanted cardioverter-defibrillator or other electronic medical
device, radio waves might affect these units and devices. So,
please observe the following.

1. Those with an implanted pacemaker or implanted

cardioverter-defibrillator should carry or use the product at
least 15 cm away from where the implant is.

2. Change to Airplane mode on the product beforehand or turn

the product off before entering a place where it may not be
possible to maintain a distance of 15 cm, such as where
movement is restricted, since there may be people with a
cardiac pacemaker or implanted cardioverter-defibrillator
nearby.

3. Pay attention to the following points when using the product

inside medical institutions.

• Do not bring the product into operating theaters,

intensive-care units (ICU) and coronary care units (CCU).

• Turn the product off in hospital wards. Do not connect the

product with a PC in hospital wards using the microUSB
cable 01 (sold separately), since the product is automatically
turned on.

• Even if you are in a lobby, etc., be sure to turn the product off

when there are electronic medical devices nearby.

• When a medical institution has laid down designated areas

where use of the product is prohibited or is not allowed to be
brought in, abide by the instructions of that medical
institution.

4. When using electronic medical devices other than an

implanted pacemaker and implanted cardioverter-defibrillator
outside a medical institution (e.g. home medical treatment),
check individually with the manufacturer of the electronic
medical device regarding the influence of radio waves.

Instruction

shl24_pl_e.book 9 ページ ２０１４年１月３０日　木曜日　午後３時５５

分

- 10 -

Stay alert to your surroundings when calling, messaging,
browsing the Internet, shooting photos, playing games, watching
TV (1Seg) or listening to music. Failure to do so might cause a fall
or traffic accident.

Do not send data by infrared communication with the infrared
port pointing toward eyes. Doing so might affect eyes. Also,
sending data with the infrared port pointing toward some other
infrared device might cause false operation, etc.

Do not point the illuminated light directly at someone’s eyes. Be
especially careful not to shoot small children from a very close
distance. Do not use Mobile light near people’s faces.
Eyesight may be temporarily affected leading to accidents.

Do not light the mobile light toward a driver of a car, motorbike or
bicycle. If dazzled by the light, the driver might become unable to
drive and cause an accident.

Sometimes, very rarely some people demonstrate symptoms
such as temporary muscle spasms, loss of consciousness, etc.
by watching repeatedly flickering screens. Those with a past
history of this should consult with a physician beforehand.

Instruction

Prohibited

Prohibited

Prohibited

Instruction

shl24_pl_e.book 10 ページ ２０１４年１月３０日　木曜日　午後３時５

５

- 11 -

The materials of parts used on the product are as follows.

CAUTION

Be sure to read the following
cautions before use.

Use of the main unit in an automobile might sometimes affect
on-vehicle electronic devices, though this rarely happens. If this
happens, do not use since this may impair safe travel.

If you feel any abnormality with your skin, immediately consult a
dermatologist. Itching, rashes, eczema, etc. sometimes occurs
depending on your physical constitution and condition.

Part Material Surface treatment

Outer case (side of display) PA resin + GF45% Acrylic UV cured

coating

Back cover PC + ABS resin Acrylic UV cured

coating
External connection jack SUS None
au Nano IC Card (LTE)/
microSD memory card cover
(body)

PC resin Acrylic UV cured

coating

au Nano IC Card (LTE)/
microSD memory card cover
(hinge)

Elastomer resin None

au Nano IC Card (LTE)/
microSD memory card cover
(seal)

Silicon rubber None

au Nano IC Card (LTE) tray POM resin None
IMEI tray POM resin None
Earphone/Microphone jack PA resin None

Prohibited

Instruction

shl24_pl_e.book 11 ページ ２０１４年１月３０日　木曜日　午後３時５

５

- 12 -

Power key PC resin Acrylic UV cured

coating
Display Reinforced glass Acrylic hard coating
Camera lens cover PMMA resin Anti-smudge

coating/AR coating
Camera lens fringe ABS resin Acrylic UV cured

coating
Mobile light lens cover PMMA resin None
Infrared port cover PMMA resin None

Do not bring the product close to magnetized objects such as
cash cards, floppy disks, credit cards, and prepaid cards. Doing
so might result in loss of recorded information.

Do not allow liquids, metal objects, burnable items, and other
foreign matter to get inside the microSD memory card slot. Doing
so might cause fire, electric shock or a fault.

Do not swing the product around by holding the strap etc. Doing
so might cause an accident or damage.

Use the product with the au Nano IC Card (LTE)/microSD
memory card cover closed. If the cover is open, dirt or water may
get inside causing a fault.

If you have a weak heart, be careful when setting the incoming
vibration and ringtone volume to prevent adverse effects on your
heart.

Part Material Surface treatment

Prohibited

Prohibited

Prohibited

Instruction

Instruction

shl24_pl_e.book 12 ページ ２０１４年１月３０日　木曜日　午後３時５

５

- 13 -

Pay attention to items becoming stuck to the main unit. The
speaker uses magnets, and so thumbtacks, pins, craft knife
blades, staples, and other metal objects sometimes become
stuck to the main unit, and cause unexpected injury.

Do not put the product directly on sand at a beach, etc. Sand or
other small particles might get inside the earpiece, mouthpiece,
speaker or earphone/microphone jack causing the volume to
drop. If sand gets inside the product, it might cause overheating
or a fault.

The product may become hot by prolonged use especially in
high-temperature environment. Be careful when using the
product touching your skin for a long time, as it might cause
low-temperature burns.

When using the product for calling or data communication, do not
keep the product in direct contact with your skin for a prolonged
period, or do not cover the product with paper, cloth, bedding,
etc. The product might get hot, causing fire, burns or a fault.

Instruction

Prohibited

Instruction

Prohibited

shl24_pl_e.book 13 ページ ２０１４年１月３０日　木曜日　午後３時５

５

- 14 -

■ Internal Battery

(The internal battery of the product is a lithium-ion battery.)

The internal battery is not fully charged at the time of purchase. Charge the
battery before using the product.

DANGER

Be sure to read the following
hazards before use.

If the liquid leaking from inside gets on your skin or clothes,
immediately rinse it off with water to avoid injury. If the liquid gets
into your eyes, do not rub but wash your eyes with water, and
immediately consult a doctor to avoid the risk of losing your
eyesight.

The internal battery is a consumable item. If the performance of
the internal battery does not recover (e.g. the usable time after
each charge has become extremely short), the internal battery is
at the end of service life, so stop using it. Failure to do so might
cause overheating, ignition, rupture or leakage. Since the battery
is built-in type, the product will be kept at an au shop etc. and
charges will be incurred for repair. Also, you may not use the
product in certain period of time. Note that the length of service
life varies depending on the usage condition, etc.

Instruction

Instruction

shl24_pl_e.book 14 ページ ２０１４年１月３０日　木曜日　午後３時５

５

- 15 -

■ Charger

WARNING

Be sure to read the following
warnings before use.

Do not use at other voltages than the specified power supply
voltage. Doing so might cause ignition, fire, overheating or
electric shock.

• Specified AC adapter (sold separately): 100 V AC to 240 V AC

Do not charge with voltage converter for overseas travel.

• Specified DC adapter (sold separately): 12/24 V DC (for

negative grounded vehicles only)

Firmly insert the power plug of the specified charger (sold
separately) into the power outlet or cigarette lighter socket down
to the base of its pins. Incomplete insertion of the power plug
might result in electric shock or fire caused by overheating and
ignition. Do not use damaged specified charger (sold separately)
or loose power outlets or cigarette lighter sockets.

If the fuse in the common DC adapter 03 (sold separately) blows,
replace it with a fuse of the specified type (250 V, 1 A). Replacing
with a different type of fuse might cause overheating or ignition.
(For information about fuse replacement, carefully read the
manual for the common DC adapter 03 (sold separately).)

Do not damage, modify, twist, pull or place a heavy object on the
cable of the specified charger (sold separately). Do not use a
damaged cable. Doing so might cause electric shock or short
circuit causing fire or a fault.

If you hear thunder, do not touch the AC adapter. Doing so might
cause an electric shock as a result of a lightning strike.

Prohibited

Instruction

Instruction

Prohibited

Prohibited

shl24_pl_e.book 15 ページ ２０１４年１月３０日　木曜日　午後３時５

５

- 16 -

Before cleaning the specified charger (sold separately), unplug
its power plug from the outlet or cigarette lighter socket. If the
plug remains plugged in when you clean the charger, it might
cause electric shock or short circuit causing fire or a fault.

Wipe off dust on the power plug. Failure to do so might cause fire,
burns or electric shock.

Place the common DC adapter 03 (sold separately) where it does
not hinder driving or safety equipment such as airbags. Failure to
do so might cause a traffic accident. Place the common DC
adapter 03 (sold separately) following the instructions of its
manual.

When the charger is not to be used for a long time, disconnect
the charger’s power plug from the power outlet or cigarette lighter
socket. Failure to do so might cause electric shock, fire or a fault.

Specified chargers (sold separately) are not waterproof. Never
use in places subject to direct splashing with water, pet urine,
etc. or in humid places such as a bathroom. Doing so might
cause overheating, fire or electric shock. In the event that a
charger is splashed with liquid, immediately disconnect its power
plug.

Do not plug in or unplug the specified charger (sold separately)
with wet hands. Doing so might cause electric shock or a fault.

Disconnect

plug from

power outlet

Instruction

Instruction

Disconnect

plug from

power outlet

Wetting

with water

prohibited

Wet hands

prohibited

shl24_pl_e.book 16 ページ ２０１４年１月３０日　木曜日　午後３時５

５

- 17 -

■ au Nano IC Card (LTE)

CAUTION

Be sure to read the following
cautions before use.

When unplugging the power plug of the specified charger (sold
separately) from the outlet or cigarette lighter socket, hold the
charger to do so. If you pull the cable, it might be damaged,
causing overheating, ignition or electric shock.

WARNING

Be sure to read the following
warnings before use.

Do not put the au Nano IC Card (LTE) in a cooking apparatus
such as a microwave oven or a pressure vessel. Doing so might
cause melting, overheating, fuming, loss of data or a fault.

CAUTION

Be sure to read the following
cautions before use.

Be careful not to injure your hand or finger when attaching/
removing the au Nano IC Card (LTE).

Use only the devices specified by the Company to insert the au
Nano IC Card (LTE) in. Using a device not specified by the
Company might cause loss of data or a fault.
For the specified devices, contact an au shop or Customer
Service Center.

Disconnect

plug from

power outlet

Prohibited

Instruction

Instruction

shl24_pl_e.book 17 ページ ２０１４年１月３０日　木曜日　午後３時５

５

- 18 -

Do not disassemble or modify the au Nano IC Card (LTE). Doing
so might cause loss of data or a fault.

Do not use or leave the au Nano IC Card (LTE) in hot places such
as by a fire or a heater. Doing so might cause melting, fuming,
loss of data or a fault.

Do not throw the au Nano IC Card (LTE) into a fire or heat it.
Doing so might cause melting, fuming, loss of data or a fault.

Do not touch the IC (metal) part of the au Nano IC Card (LTE) or
short-circuit it. Doing so might cause loss of data or a fault.

Do not drop the au Nano IC Card (LTE) or subject it to strong
impact. Doing so might cause loss of data or a fault.

Do not fold, bend or place a heavy object on the au Nano IC Card
(LTE). Doing so might cause loss of data or a fault.

Do not wet the au Nano IC Card (LTE). Doing so might cause loss
of data or a fault.

Disassembly

prohibited

Prohibited

Prohibited

Prohibited

Prohibited

Prohibited

Wetting

with water

prohibited

shl24_pl_e.book 18 ページ ２０１４年１月３０日　木曜日　午後３時５

５

- 19 -

Do not scratch the IC (metal) part of the au Nano IC Card (LTE).
Doing so might cause loss of data or a fault.

Do not store the au Nano IC Card (LTE) in dusty places. Doing so
might cause loss of data or a fault.

Do not store the au Nano IC Card (LTE) in places exposed to
direct sunlight or hot and humid places. Doing so might cause
loss of data or a fault.

Store the au Nano IC Card (LTE) out of reach of small children.
Accidental swallow might cause asphyxiation, injury, etc.

Prohibited

Prohibited

Prohibited

Instruction

shl24_pl_e.book 19 ページ ２０１４年１月３０日　木曜日　午後３時５

５

- 20 -

These precautions are provided to ensure that performance can be fully
demonstrated.
Thoroughly read these precautions to ensure correct use.

■ Precautions common to the main unit, internal battery, charger,

au Nano IC Card (LTE), peripheral devices

● Do not apply excessive force to the product during use. Be sure not to put

the product into a tightly packed bag or place a heavy object on the product
in a bag. Sitting on the product in your pocket might damage the display or
internal circuit board resulting in a malfunction.
Keeping an external device connected to the external connection jack might
damage the connector resulting in a malfunction. Such damage and
malfunction are not covered by the warranty, even if there is no external
damage.

● To ensure waterproof property (equivalent to IPX5 and IPX7) of the product,

use the product with the au Nano IC Card (LTE)/microSD memory card
cover tightly closed.
Note that the waterproof property is not guaranteed in every usage
condition. Do not allow water to get inside the product or splash water on
the charger or optional accessories. Do not open/close the au Nano IC Card
(LTE)/microSD memory card cover in the rain or with water drops on the
surface of the product. Doing so might cause water intrusion resulting in
internal corrosion.
Malfunctions determined to be caused by water intrusion are not covered
by the warranty.

● Do not use the product in extremely hot, cold or humid places. (Use within

an ambient temperature range of 5°C to 35°C and humidity range of 35% to
85%.)

• Charger

• Conversion cables

Handling Precautions

shl24_pl_e.book 20 ページ ２０１４年１月３０日　木曜日　午後３時５

５