Sharp HRO00121 User Manual

Slot

Notch

IC (gold)

Tab

123

Tray

Notch

Tabs

Back cover

Lever

Before Use

Inserting UIM (FOMA card) and battery pack

1 Slide the back cover lever to unlock (1), hook a nail on the slot and

remove the back cover (2)

2 Pull out the tray straight (1). Set the UIM on the tray

with the IC (gold) side turned down (2) and push
the tray all the way in (3)

3 Turn a recycle mark side up, match tabs and

attach the battery pack

4 Insert the tab of the top of the back

cover into the FOMA terminal slot
(1), insert it in the direction of the
arrow (2) and securely push five
tab areas down with both hands
(3)

5 Slide the back cover lever to lock

Turn off the power and insert the UIM/battery pack while holding the FOMA

terminal with your both hands. Note that excessive force may damage the
FOMA terminal, UIM and battery pack.

The battery pack is not waterproof.

Securely close the back cover. If not closed securely, the back cover may

come off and the battery pack may fall out due to vibration. May damage the
waterproof performance and allow water to seep.

そ
の
他

99

Charging

Connector (Turn the
side with the arrows up)

FOMA AC
Adapter 01/02

Charging LED

1

It is recommended that the accompanying desktop holder be used for charging

to prevent water from seeping caused by forgetting to close the external
connector terminal cover.

The AC adapter and desktop holder are not waterproof. Never try to charge the

battery pack when the FOMA terminal is wet.

1 Insert the AC adapter into the connector terminal of the desktop holder
2 Insert the AC adapter power plug into an outlet
3 Place the FOMA terminal in the desktop holder in the direction of the

arrow until it clicks (1)

Charge start sound is heard, charging LED illuminates, and charging starts.

4 Hold the desktop holder and lift the FOMA terminal out when charging is

complete

Charge end sound is heard and charging LED turns off when charging is

complete.

そ
の
他

100

Pull the AC adapter out of the outlet when left unused for a long period of

time.

When charge start sound is not heard or when charging LED does not

illuminate, check that the FOMA terminal is placed securely in the desktop
holder (except when terminal is turned off, manner mode is set or charge start
sound is silent).

When placing the FOMA terminal in the desktop holder, be careful not to

catch a strap, etc.

Part Names and Functions

1 Earpiece
2 Air vent
3 Main display
4 i (,): i-mode/Operation guidance key
5 m: Mail/Operation guidance key
6 s: Start/Hands-free key
7 1 to 9, *, 0 and #: Dial/Character entry keys
8 $: Multi/Quick search/VeilView key
9 Mouthpiece/Microphone
a Sub camera
b Brightness sensor
c w&t&: Multi-guide key
d C: Camera/TV/Operation guidance key
e a: Phonebook/Operation guidance key
f c (J): i-Channel/Clear key
g H: Power/End key
h y: MAP/GPS key
i Charger termina
j Called/Charging LED
k 1Seg antenna
l Sub display
m microSD Card slot
n &: Side key
o Picture Light
p Strap hole
q FOMA antenna
r Main camera
s Speaker
t Infrared port
u Back cover
v b mark
w Back cover lever
x External connector terminal

Key illustrations are examples and may look different from actual keys.

そ
の
他

101