Sharp HRO00098 User Manual

First Step Guide
Before Using Handset ii
Handset Functions vii
General Notes xii
Customer Service xv
See Online User Guide for "Safety Precautions."
i
Small Light
External Device Port
Port Cover
AC 100V Outlet
Blades
AC Charger
Release Tabs
Charger Connector
Arrows
1
2
3
Notch
Battery (SHBCC1)



ii
Before Using Handset
Accessory
Remove cover
.
Press and slide as shown.
Insert battery
Close cover
Charging
Use specied AC Charger ZTDAA1 (sold separately) only.

Open Port Cover to connect AC Charger

Plug AC Charger into AC outlet
.
Small Light illuminates red while charging.
.
Small Light goes out when battery is full.

After charging, unplug AC Charger, then disconnect handset
USIM Card Installation

Slide in USIM Card with IC
4-digit code ( PIN Entry to restrict usage. Change PIN as needed.
PIN Lock & Cancellation (PUK Code*)
Entering incorrect PIN three consecutive times activates PIN Lock, limiting handset use. Enter PUK Code to unlock. For details, contact SoftBank Mobile Customer Center, General Information.
Each USIM Card has a unique Personal * Unblocking Key (PUK Code). Do not disclose it to unauthorized persons.
USIM PIN
9999
by default); activate
chip facing down

Insert battery (P.ii)
.
First power off handset and remove battery.
.
Do not force USIM Card into/out of handset.
.
USIM Card must be inserted to use handset.
iii
Before Using Handset
Manner Mode
Minding Mobile Manners
Please use handset responsibly. Inappropriate handset use can be both dangerous and bothersome. Please take care not to disturb others when using handset. Adjust handset use according to your surroundings.
Activating/Canceling Manner Mode
)
(Long)
,
Security Codes
Handset Code
9999
by default; use or change some
functions.
Center Access Code
4-digit code selected at contract; access Optional Services via landlines or change contract details.
Network Password
4-digit code selected at contract; restrict incoming/outgoing calls (Call Barring).
.
Message appears for incorrect code entries; retry.
.
If Network Password is incorrectly entered three times consecutively, Call Barring settings are locked. To resolve, Network Password and Center Access Code must be changed. For details, contact SoftBank Mobile Customer Center, General Information.
iv
Specications
g
Weight*
Continuous Talk Time*
Continuous Standby Time* (clamshell closed)
Charging Time* (power off)
Dimensions* (W
x
H x D)
Maximum Output
.
Values calculated with battery installed.
*Approximate value
●●
●●
minutes (3G)
●●
minutes (GSM)
●●
hours (3G)
●●
hours (GSM)
AC Charger: In-Car Charger:
(clamshell closed, without protruding parts)
●●
●●
●●
x ●● x ● mm
W (3G) W (GSM)
●●
minutes
minutes
Display Indicators & Key Assignments
Signal strength Manner mode active Packet transmission available (3G) Battery strength Packet transmission available (GSM) New Voicemail Unread mail Alarm set Memory Card in use
Open Messaging menu or
B
execute Softkey functions Open Shortcuts menu. In text entry windows, toggle
'
upper/lower case Delete entries, escape/
$
return to previous window Initiate/answer calls
! 1
|
Enter numbers/characters
#
Open Dictionary
~
Select handset mode
)
Multi Selector
Select menu items, move cursor, or scroll pages, etc. Multi Selector operations are indicated in this guide as shown below:
%
: Press the center
c
: Press the left side
d
: Press the right side
b
: Press the bottom
Open Yahoo! Keitai Main Menu or execute Softkey
A
functions Activate TV or switch entry
&
mode Turn handset power on/off
"
Side Key
Volume Key operation is indicated in this guide as shown below:
L
: Press E or
Activate mobile camera
|
F
v
Loading...
+ 5 hidden pages