Sharp HRO00082 Users Manual

Download

Cautions when using the Optical TOUCH CRUISER

Do not operate the Optical TOUCH CRUISER using a pointed

metallic object such as a pen tip. May cause scratches or a failure of the sensor.

Note that putting a sticker, etc. to the operating range may cause

a malfunction.

Because the Optical TOUCH CRUISER detects motions of the

fingerprint, it may not operate properly depending on the condition of the finger (when foreign objects, such as dust, sand, etc. are attached to the finger).

Setting whether to use Optical TOUCH CRUISER

In the Custom menu, select [Settings]/[General

settings]/[TOUCH CRUISER set]/[Usage settings].

Select the setting/t.

Setting pointer speed/scroll speed

In the Custom menu, select [Settings]/[General

settings]/[TOUCH CRUISER set]/[Pointer speed]/[Scroll speed].

Select the speed/t.

Setting and selecting menu

Set, change or save functions from the menu screens.

For details on operations in the viewer position nP. 37

The explanations in this manual are based on how to retrieve a function from the Custom menu.

Setting start menu <Menu priority>

Set the start menu that displayed when t is pressed in stand-by.

Start menu Characteristics

Custom menu

Basic menu Select the icon displayed on the menu to retrieve the

In stand-by, press t/[Settings]/[Disp/LED/

Power saver]/[Menu priority].

: In the Custom menu/Basic menu: Press C/[Menu priority].

Select the start menu/t/[Yes].

The preset Kisekae Tool (nP. 113) can be selected and set. Each Kisekae Tool consists of different functions and designs. Kisekae Tools can be downloaded from sites and used.

Preset Kisekae Tools

 White  Black  Pink  拡大メニュー(Large)  シンプル(Simple)  ダイレクトメニュー

※ Preset Kisekae Tools differ depending on the

FOMA terminal handset color.

function. Also, input the function number, which is assigned to each function, to quickly retrieve the function to be used.

Before Using the Handset

■ Switching set start menu temporarily

Stand-by

Shortcut menu

Basic menuCustom menu

(;)

Custom menu When [1Seg]

appears

When 1Seg is

activated

(;)

w t

Switch the start menu temporarily. When the stand-by display reappears, the start menu returns to the one set in Menu priority. Use the Shortcut menu to retrieve saved functions quickly. Other

Before Using the Handset

functions can also be saved in the Shortcut menu (nP. 393).

Retrieving a function from each menu

For details on operating shortcut menu nP. 393 For details on the available functions nP. 454 Use w and the Optical TOUCH CRUISER in either menu. Press the dial key corresponding to the menu item number (U, V,

W, etc.) to select a function. However, in the Custom menu, a function may not be selected by using the menu item numbers.

The method for selecting functions may differ depending on the

Kisekae Tool set for the Custom menu.

Press c to re-select a function, and the previous screen

reappears. Press H to return to stand-by.

When a stock icon (nP. 32) appears in stand-by, select G to show the each menu.

The way of activating 1Seg with Multi guide key or Optical TOUCH CRUISER is explained as an example below. For , (;), use the Optical TOUCH CRUISER to select an

item.

The following shows the screen operated with the Optical TOUCH

CRUISER.

■ Retrieving from the Custom menu

■ Retrieving from the Basic menu

(;)

Basic menu When [1Seg]

appears

When 1Seg is

activated

(;)

w t

u t

Submenu screen

Operating range of the touch panel

In the Basic menu, input the function number, which is assigned to

setting menu, to quickly retrieve the function to be used (nP. 454).

When the Custom menu image is changed by Kisekae Tool, the

operation may differ from the description in this manual. In this case, switch the menu screen to the Basic menu (nP. 35) or perform the Reset menu screen (nP. 115).

Touch panel

Operations in viewer position

In the viewer position, operate by putting the finger on the touch panel (screen).

In other than the viewer position, the touch panel is available during

Videophone (nP. 78).

Touch panel

The operations differ depending on the function and screen in use.

In addition, the message stating that the operation is not available appears when the touch panel cannot be used. Operate the touch panel inside the following operating range of touch panel. However, when a substitute image appears in the right side of the screen, operate in the left side of the screen where functions are shown.

Before Using the Handset

Selecting a function from Submenu

When [Submenu] appears in the Operation guidance, press C to display functions (Submenu) that can be used in the screen. Select the displayed Submenu with w or the Optical TOUCH CRUISER. If there are multiple pages in the Submenu, change pages with w or the Optical TOUCH CRUISER. Alternatively, press the dial key corresponding to the menu item number (U, V, W, etc.) to select a function. However, some Submenus do not have item numbers.

The notation of operation described in this manual and its meaning

are shown below.

Touch

Put the finger on the touch panel and put it off.

Double-touch

Quickly touch the same point twice.

Continued on next page

Slide

Keep the finger on the touch panel and slide it.

Before Using the Handset

Quick slide

Quickly slide the finger and put it off.

Putting the distance between two fingers apart/closer

Put two fingers on the touch panel and slide them with putting the distance between two fingers apart/ closer.

When putting the finger on the touch panel, the tone sounds and the vibrator is activated (excluding while activating Touch menu and a camera).

•

The volume can be changed (nP. 104). The tone cannot be changed.

• The vibrator can be set to ON/OFF (nP. 105).

When using the touch panel

The touch panel does not work when operated with a gloved

finger or with foreign objects placed on the operation pad.

Note that operating with a wet finger or putting a sticker to the

touch panel (display) may cause a malfunction.

Using menus or functions

Retrieve functions such as Full Browser or 1Seg from the Touch menu. Operating or changing settings with the Submemu or control key is available while using each function (touch operation is also available).

■ Touch menu

If the screen is switched from the

normal position to the viewer position in the stand-by display, Custom menu, Basic menu or others, Touch menu appears.

•

Functions to activate when setting the handset to the viewer position in the stand-by display can be changed (

Touch the touch panel while displaying Stand-by (W) in the viewer

position to display the Touch menu.

The following functions can be retrieved from the Touch menu.

Map/GPS appli Full Browser Home i-motion

1Seg LifeKit Manga&Book Camera Shoot still pic

Mail Inbox MUSIC Player

*1 “Mapping appli” (nP. 312) is started. i-appli to start can be

changed from the Map setting (nP. 277, P. 311).

*2 The music is played from the spot where the playback stopped

previously.

Bookmark 1Seg

Shoot movie Document Viewer

Outbox Unsent messages Compose

message

Data box My picture

P. 382).

Reader

To cancel/end a function, press & (q) while using the function.

Example: 1Seg Example: MUSIC Player

The images and items in the Touch menu cannot be changed.

Stand-by (W)

Stand-by (W) appears when the “CLR” key is touched or & (q) is pressed in the Touch menu. Stand-by (W) can be changed

(nP. 108).

Press & (q) while displaying

Stand-by (W) to activate the camera. Press & (q) for 1+ seconds to activate 1Seg.

i-appli that does not support the touch panel is not available in the

viewer position. Switch to the normal position and operate.

When the following items are displayed in Stand-by (W), touch the

displayed item and operate. Touch the area other than displayed items to operate Stand-by (W).

 Stock icon  Notice that 1Seg reservation recording is completed

■ Submenu

While using the function, quickly slide the finger from the upper right

to the lower left (or from the upper left to the lower right) to display the Submenu.

• Touch

C of the control key or D on the upper part of the

screen to display the Submenu.

• Touch the area other than the Submenu to hide the Submenu.

The Submenu in the normal position and menu in the operation

guidance are displayed in the Submenu with the handset set to the viewer position. Operate or change the settings by selecting the Submenu in the same way as in the normal position (some menu cannot be selected depending on the screen).

■ Control key

While using a function, touch the touch panel to show the control keys.

• Touch the area other than the control keys to hide the control keys (excluding 1Seg). Also, if no operations are performed for approximately 7 seconds with the control keys shown, the control keys disappear.

If there are extra keys other than those shown, touch

the next key.

For details on control keys of each function nP. 41

The control keys always appear in the shooting screen or while the

music data is played.

F to show

■ Touch operation

Easily operate with the finger without displaying the Submenu or

control keys.

For details on touch operation of each function nP. 41

For the touch operation, be careful not to touch a key shown in the

screen.

Perform touch operation after hiding control keys while e-books,

Word and Excel files, etc. are displayed.

Before Using the Handset

■ Operations for menu and function

Touch the touch menu or control keys to execute the functions.

Example: Touch menu

Before Using the Handset

In the Submenu, list and data list screens, select the menu, items,

or data by touching, moving the cursor and re-touching them.

Example: [Camera] folder data list screen (Change theme: [Visual

menu 1])

• Keep the image with cursor touched and the image appears in the center of the screen.

If there are multiple pages in the Submenu, list or data list screen,

use one of the following methods to switch the pages.

• Quickly slide the finger left/right.

• Touch A/B or $/#, etc. (when they appear).

• Touch an image behind the image currently shown (when Change theme is set to [Visual menu 1]).

When scrolling the Submenu, slide the area in which the Submenu

is displayed up/down with the finger.

In the screen activated from the Submenu, operation guidance

menu in the normal position may appear as the control keys.

When having touched the data or item by mistake, slide the finger

away from it to cancel the selection.

Touch the “CLR” key or press & (q) to return to the previous

screen.

Control key/Touch operation list

■ While Full Browser is displayed

Control key

Control keys are not shown. Operate from the Submenu.

Touch operation

Keep key touched To display a zoom bar Slide the finger up/down/left/right To scroll a screen Quickly slide the finger left/right To display next/previous page

*1 Zoom bar can also be displayed from the Submenu. Slide the

slider of zoom bar left/right or touch ＋/－ on the both ends of the zoom bar to zoom up/down the screen.

*2 Not available when there is no history.

Touch the tab on the upper part of the screen to switch windows. Touch a link to highlight and touch it again to view the linked site. Quickly slide the finger left/right or touch $/# to move the cursor

to next/previous history in the Visual history screen.

• Quickly slide the finger up/down or touch %/& to switch

windows.

■ While a PC movie is played back

Control key

*1, 2

To turn down the volume

To stop

To switch to the Full-screen

mode

To fast forward

To pause/play

To fast reverse

To turn up the volume

*1 May not appear for the PC movies which have restrictions on the

operations such as the live distribution. *2 Keep key touched to fast forward/fast reverse. *3 Keep key touched to adjust the volume continuously. Settings can be changed from the Submenu.

Touch operation

Quickly slide the finger up/down To adjust volume

■ While 1Seg is being watched

Control key

To select a station with

Keep key touched to select a station by searching a frequency. Touch

[

*2 Keep key touched to record video. Touch f to end recording.

*3 Keep key touched to adjust the volume continuously. Settings can be changed from the Submenu.

Touch operation

Quickly slide the finger up/down To adjust volume Quickly slide the finger left/right

DOWN

to cancel the selection for station by searching a frequency.

To record 1Seg programs

as a still picture

To turn up the volume

To turn down the volume

To select a station with UP/DOWN

Before Using the Handset

■ While camera is activated

Control key

Before Using the Handset

To switch to the Egao focus shutter mode

To switch to the Furimuki shutter mode

To start shooting

To end shooting

*1 Appears in the still picture shooting screen. *2 Touch

*3 Appears in the movie shooting screen. *4 Appears while shooting a movie.

Settings can be changed from the Submenu. In the preview screen after shooting still picture, the following keys

Submenu appears after shooting movie.

Touch operation

Slide the finger up/down To adjust the brightness Slide the finger left/right To adjust the zoom

* The range of zoom is changed depending on how far the finger is

Focus and shoot as follows when the AF mode is set other than

P to return to the Normal shooting mode.

appear.

To save

To clear

* Appears after shooting still pictures continuously.

slid left/right. When zooming up in a moment, double-touch the right edge of the screen.

[Center AF], [Standard] or [Closeup].

•

Select [Def (people first)]: Touch the face detection frame to focus.

• Select [Spot AF]: Touch a point to focus/touch the focus area.

Select [Manual focus]: Slide the finger left/right to focus/touch G.

•

To shoot with the normal shutter

N O

*1, 2

To save all

To delete all

■ While a message details screen is displayed

Control key

To next mail/message

]

Settings can be changed from the Submenu.

Touch operation

Slide the finger up/down To scroll a screen up/down Slide the finger left/right

* Alternatively, touch A/B to scroll a screen up/down. When touching during Decome-Anime playback screen display, a

message details screen is displayed.

Touch the highlighted data (nP. 187) or attached file to select it.

Switch the display method for message details screen (nP. 44).

To previous mail/message

To next/previous mail or message

■ While an image is displayed from My picture/1Seg

of Data box

Control key

To pause/play

To previous

* Appears for Flash movies. Settings can be changed from the Submenu.

Touch operation

Slide the finger left/right To next/previous Putting the distance between two

fingers apart/closer

If the zoomed up image is displayed, slide the finger up/down/left/

right to change the display position.

To next

]

To zoom up/down

■

While i-motion is displayed from i-motion of Data box

Control key

To previous

To pause/play

To next

To turn up the volume

To turn down the volume

*1 Keep key touched to perform Fast reverse/Fast forward. *2 Keep key touched to adjust the volume continuously. *3 Appears when attaching is available. Settings can be changed from the Submenu.

Touch operation

Quickly slide the finger up/down To adjust volume Quickly slide the finger left/right To next/previous

To stop

To switch to the Full-screen

mode

To compose a message

attached

■ While a video is played back from 1Seg of Data box

Control key

To fast reverse

To pause

To fast forward

To turn up the volume

To turn down the volume

*1 Keep key touched to increase the speed to 6/2. Touch

to play back a video while performing Fast reverse/Fast forward. *2 Keep key touched to adjust the volume continuously. While stopped/paused, the following control keys appear.

To play

To turn up the volume

To stop

To return to a location of

approx. 10 seconds before

To skip to a location of

approx. 30 seconds after

To turn down the volume

* Keep key touched to adjust the volume continuously.

Settings can be changed from the Submenu.

Touch operation

Quickly slide the finger up/down To adjust volume Quickly slide the finger left/right Fast reverse/Fast forward

* Operation is not available while stopped/paused. Operate during

Fast reverse/Fast forward to increase the speed.

■ While e-book, etc. is displayed

Control key

To top

Line-by-line/

Frame-by-frame forward

Settings can be changed from the Submenu.

Touch operation

Quickly slide the finger up/down/ left/right

Touch a link to highlight and touch it again to view the linked site.

Line-by-line/

Frame-by-frame reverse

To move between lines/frames

■ While Word or Excel files are displayed

Control key

To next page

]

Settings can be changed from the Submenu.

Touch operation

Slide the finger up/down/left/right To scroll a screen Quickly slide the finger left/right To next/previous page Double-touch To fit to screen

Putting the distance between two fingers apart/closer

To previous page

To zoom up/down

Before Using the Handset

■ While music data is played

Control key

To previous song/To return

Before Using the Handset

to beginning of song

To pause/play

To next

To turn up the volume

To turn down the volume

To stop

*1 Keep key touched to perform Fast reverse/Fast forward. *2 Keep key touched to adjust the volume continuously. *3 Appears while viewing images/lyrics. *4 Appears when multiple images/lyrics are saved. Settings can be changed from the Submenu.

Touch operation

Quickly slide the finger up/down To adjust volume Quickly slide the finger left/right To next/previous

To view the list screen of

music data for playback

To display the folder list

screen

To save images/lyrics

To view next images/

lyrics

*3, 4

Other operations

■ Entering terminal security code

If the security code entry screen appears, enter the terminal security code by touching the displayed numbers.

■ Switching display method for message details

screen

In the message details screen, touch [Hori screen mode] to display the message details screen in the left side of the screen. Re-touch to display in full-screen. Selecting is not possible in the normal position. The setting is valid

only in the viewer position.

Support Book

Displaying Support Book

Use this function for unsure operations. After the Support Book appears, check the explanation and operation procedures of each function. In addition, directly start

functions that were looked up in the Support Book.

In stand-by, press $/[Support Book].

Select a menu or item/t.

: To start functions directly: Select the function to start/t/

[Yes].

FOMA card

Using FOMA card

A FOMA card is an IC card that records personal information, such as phone numbers. A FOMA card can store phonebook data and SMS. By switching FOMA cards, multiple FOMA terminals can be used for different purposes as needed.

If a FOMA card is not inserted, transmission functions such as

voice/Videophone/PushTalk calls, i-mode, mail transmission and packet transmission are not available on the FOMA terminal.

Inserting/Removing FOMA card

Before inserting or removing the FOMA card, turn off the power,

position the back facing upwards and remove the battery pack. Close and hold the FOMA terminal firmly with your both hands.

■ Inserting FOMA card

Notch

IC (gold)

Tray

Fit the notch of the FOMA card to that of the tray.

Tab

Hook a finger on the tab and pull the tray out (1).

: Pull out the tray straight until it stops.

Hold the FOMA card with the IC

facing up and set on the tray (2).

Push the tray all the way in (3).

■ Removing FOMA card

Hook a finger on the tab, pull the tray out (1) and

remove the FOMA card (2).

: Do not allow the FOMA card to fall when removing it.

Inserting or removing the FOMA card forcibly may damage the

card or deform the tray. Use caution.

Refer to the FOMA card user’s guide for more information on the

FOMA card.

Do not misplace the FOMA card once it is taken out. When the tray falls off, slide the tray in straight along the guide rail.

Security codes

The FOMA card has a “PIN1 code” and a “PIN2 code”. Both are set to [0000] by default but can be changed to a four- to eight-digit number by the user (nP. 125).

FOMA card security functions

The FOMA terminal has built-in FOMA card security functions (FOMA card restriction functions) as functions for protecting personal data and files. When data or files are retrieved using any of the following methods

or i-appli is running with the FOMA card inserted into the FOMA terminal, FOMA card security functions are automatically set in the retrieved data or files.  When a file such as an image, melody or PDF is downloaded

from a site or Internet web page

 When a site or Internet web page is saved as a screen memo  When i-mode mail with a file attached is received  When i-appli is running

Data, files or software with FOMA card security functions run only

when in use with the FOMA card inserted at time of acquisition. Display, play, attach to i-mode mail, run software, send data using Ir communication function and iC communication function, and copy to microSD Card can be executed. These operations cannot be performed if a different FOMA card is inserted.

The following indicates the data for which FOMA card security is

set.

 Melody   Screen memo  Chaku-uta®/Chaku-uta full  Chara-den  File attached to Message R/F  i-motion  ToruCa (details) image  PDF data  Image inserted to Deco-mail or signature  Kisekae Tool  Videophone picture memo

Image (including animation and Flash movie)

Continued on next page

Before Using the Handset

 Machi-chara  i-appli (including i-appli stand-by)

One’s own FOMA card security functions are set for downloaded data, files attached to received mail and i-

ppli that have been run, allowing viewing and playback of data.

When another’s FOMA card is inserted, data with one’s own FOMA card security functions set cannot be viewed or played back.

One’s own FOMA card

Another’s FOMA card

Different FOMA card

inserted

 Download dictionary  Download font

Before Using the Handset

 Contents transfer compatible data  Image in Message R/F  Music&Video Channel program  Deco-mail template with data which FOMA card security

functions are set

 Decome-Anime Template  e-book/e-dictionary/e-comic saved in the [Comic] folder  File attached to i-mode mail other than the following

• ToruCa ・Phonebook ・Schedule

• Bookmark ・Documents

※ “Chaku-uta” is a registered trademark of the Sony Music

Entertainment (Japan) Inc.

The following indicates the settings saved in the FOMA card.

 Own number  PIN setting  Select language  SSL certificates  SMS center  SMS expiry  SMS input character

The following explanation refers to the FOMA card inserted at time

of data/files retrieval as “one’s own FOMA card” and other FOMA cards as “another’s FOMA card”.

When one’s own FOMA card is replaced with another’s FOMA

card, the data or files for which FOMA card security functions are set cannot be set as stand-by displays or ring tones.

When a FOMA card is replaced with another’s FOMA card, FOMA

card security functions are activated and if data or file retrieved from a site is set as the stand-by display or ring tone, the setting is reset to the default. When one’s own FOMA card is re-inserted, the setting returns.

Example: When setting [Melody A], for which FOMA card

security functions are set, as a ring tone

When one’s own FOMA card is taken out or is replaced with another’s FOMA card, ring tone returns to default setting. When one’s own FOMA card is put back, the ring tone returns to [Melody A].

FOMA card security functions cannot be set for data received

using Ir communication or data transmission functions, and still pictures/movies, etc. shot with the FOMA terminal.

It is possible to move or delete data or files for which FOMA card

security functions are set even when another’s FOMA card is inserted.

Running i-appli by selecting highlighted text in i-mode mail details

screen cannot be performed or retrieved when FOMA card security functions are set.

If the FOMA card is replaced with another’s FOMA card after

i-appli stand-by is set, the set i-appli cannot be activated in stand-by, and the image set in Stand-by display appears.

FOMA card type

Note the following differences between “FOMA card (blue)” and “FOMA card (green/white)” used on the FOMA terminal.

Function

Number of phone number digits available in the FOMA card phonebook

Client certificate operations for FirstPass

Use of WORLD WING Not available Available P. 438 Service Numbers Not available Available P. 429

FOMA card

(blue)

Up to 20 digits Up to 26 digits P. 94

Not available Available P. 190

FOMA card

(green/white)

Page

About WORLD WING

WORLD WING is a DOCOMO’s FOMA international roaming service that makes it possible to use the mobile phone number registered in Japan to make and receive calls even overseas by the FOMA card (green/white) and supported FOMA terminal. If subscribed to the FOMA service after September 1, 2005,

subscription for “WORLD WING” is not required. However, if subscription for “WORLD WING” is canceled at or after subscription for the FOMA service, subscription for “WORLD WING” is required again.

If subscribed to the FOMA service before August 31, 2005 but not

subscribed to “WORLD WING”, subscription for “WORLD WING” is required.

Some payment plans are not available. When the FOMA card (green/white) is lost or stolen overseas,

promptly contact DOCOMO and conduct a procedure for canceling the use of service. Refer to General Inquiries on the back of this manual for inquiries. Note that transmission/calling charges after the FOMA card is lost or stolen are incurred to the subscriber.

Attaching/Removing battery pack

Use the battery pack SH20 exclusive to the FOMA terminal.

Turn off the power, close the FOMA terminal, and hold it in your

both hands before attaching or removing the battery pack.

■ Attaching battery pack

Lightly push the back cover in the direction of the

arrow (1), slide approximately 3 mm (2) and remove the back cover (3).

Before Using the Handset

Continued on next page

Before Using the Handset

Face the side with a recycle mark up

Tabs

Battery pack

Battery pack connector terminal side

Tabs

“PULL” Tag

Attach the battery pack (4).

: The battery pack has tabs that make it easy to attach. Attach the

Attach the back cover (5).

: Attach the back cover as shown in the illustration and then push

battery pack with a recycle mark side faced up.

the back cover and slide into place.

■ Removing battery pack

Follow step 1 of “Attaching battery pack” to

remove the back cover.

Remove the battery pack.

: The battery pack has a “PULL” Tag that makes it easy to

remove. Hold the “PULL” Tag between the fingers and lift up it in the direction of an arrow (45-degree from the FOMA terminal) to remove the battery pack.

Using unnecessary force when attaching or removing the battery

pack may damage the connector terminal for the battery pack (charger terminal) on the FOMA terminal.

Firmly close the back cover. If not closed firmly, the back cover

may come off and the battery pack may fall out due to vibration.

Charging

The battery pack is not fully charged at the time of purchase. Be sure to charge the battery using the exclusive AC or DC adapter (sold separately) before use.

■ Cautions while charging

Do not charge for long periods of time with the power left on. If the

FOMA terminal is left on after charging is complete, the battery pack charge decreases. In such cases, the AC or DC adapter charges the battery again. However, depending on when the FOMA terminal is disconnected from the AC or DC adapter, the battery charge level may be low, the battery alert tone may sound, or the battery may only be usable for a short time.

When the battery is empty and terminal is recharging, charging LED

may not illuminate immediately.

If the battery empty alert is displayed, the alert tone sounds and the

power cannot be turned on, charge the battery for a while.

If the battery empty alert is displayed and charging begins within 60

seconds of the alert tone, the status returns to normal.

While charging, terminal may not turn on even when charging LED

is illuminated in red. Charge longer and try turning power on again.

Frequently recharging the battery when its power is still remaining

enough may shorten the life of the battery pack. It is recommended to use the battery to a certain level before recharging.

The battery pack cannot be charged by itself.

■ Estimated charge times and LED display

The following figures are estimated times for charging an empty battery pack with the FOMA terminal turned off.

FOMA AC Adapter 01/02 Approx. $$ min FOMA DC Adapter 01/02 Approx. $$ min

Charging LED illuminates in red while charging, and it turns off

when charging is completed.

Check that the battery pack has been properly attached when

charging LED flashes red. The LED also flashes red when the battery pack has reached the end of its service life.

The battery pack can also be charged with the FOMA terminal

turned on ({ on the display flashes during charging). When charging is completed, charging LED turns off, and { on the display changes to ".

When the battery becomes warm, charging may automatically stop

even if the battery has not been fully charged. Charging resumes after the temperature lowers to an appropriate temperature. While charging is stopped, charging LED turns off ({ on the display flashes while stopped).

■ Estimated times of use when fully charged

Continuous talk time

Continuous stand-by time

1Seg watching time Approx. $$ min

Continuous talk time is estimated as the usage time at normal transmission signal strength, and continuous stand-by time is estimated as the usage time while moving with the FOMA terminal folded at normal signal strength. Using i-mode reduces talk (transmission)/stand-by time. When i-Channel is subscribed, information is automatically received and updated, so talk (transmission)/stand-by time will be reduced. In addition, when shooting or editing an image, watching 1Seg, composing i-mode mail, activating the downloaded iplayer, Bluetooth function or data communication, the talk (transmission)/ stand-by time will be reduced even if calls or i-mode transmission are not made. Some idownloading. To avoid this, set not to connect in advance.

FOMA/3G Voice call: Approx. $$ min

Videophone call: Approx. $$ min GSM Voice call: Approx. $$ min FOMA/3G3G/GSM

setting: 3G

3G/GSM setting: AUTO

GSM 3G/GSM

setting: AUTO

ppli or the i-appli stand-by, or using MUSIC Player, i-motion

ppli software may continue transmission even after

When mobile: Approx. $$ hr

At rest: Approx. $$ hr

Continued on next page

Before Using the Handset

The actual usage time is a combination of stand-by time and talk

Connector (Face the side with the arrows up)

Release buttons

External connector terminal cover

Charging LED

External connector terminal

time, and the longer the talk time, the shorter the stand-by time becomes.

1Seg watching time is estimated as the watching time at normal

Before Using the Handset

transmission signal strength with a flat-plug stereo earphone set P01 (sold separately) used.

Talk (transmission)/stand-by time may be reduced by about half or

1Seg watching time may be shortened depending on battery pack status, function used, temperature and other environmental conditions, or signal strength (no signal or weak signal).

■ Battery pack service life

Battery pack is a consumable product. Service time per charge is

gradually reduced every time the battery is charged.

When service time per charge is reduced to about half of the default

time, this means that the battery pack is approaching the end of its service life. In such a case, it is recommended to replace the battery pack as soon as possible. Depending on usage, the battery pack may swell as it approaches the end of its service life but this will not cause problems.

If i-appli, Videophone, or 1Seg is used while charging for a long

time, the service life of the battery pack may become shorter than estimated.

To protect the environment, return used batteries to

NTT DOCOMO, any DOCOMO retailer, or a recycling agency.

■ About charging batteries

Refer to user’s guide of FOMA AC Adapter 01/02 (sold separately),

FOMA AC Adapter 01 for Global use (sold separately), or FOMA DC Adapter 01/02 (sold separately).

FOMA AC Adapter 01 covers only 100V AC. FOMA AC Adapter 02/

FOMA AC Adapter 01 for Global use covers from 100 to 240V AC.

The shape of the plug for the AC adapter is for 100V AC (for

domestic use). To use the AC adapter of 100 to 240V AC overseas, a conversion plug adapter that is compatible with the voltage of your country of stay is required. Do not use a transformer for use overseas to charge the battery.

Charging by using AC adapter/DC adapter

[Read “FOMA AC adapter 01/02 (sold separately) and FOMA DC adapter 01/02 (sold separately) user’s guide” carefully.]

Battery pack can be charged even with the FOMA terminal opened

or in the viewer position.

Open the external connector terminal cover (1)

and insert the AC or DC adapter connector horizontally into the external connector terminal (2).

: Check the direction (See diagram)

of the connector, keep it parallel with the FOMA terminal and firmly push all the way in until it clicks.

When inserting the AC adapter power plug into an

100V AC outlet

For AC adapter For DC adapter

Cigarette lighter socket

outlet or inserting the DC adapter power plug into a car cigarette lighter socket, Charge start sound is heard, charging LED illuminates, and charging starts.

When Charge end sound is heard and charging

LED turns off, charging is complete.

: When removing the connector, always hold the release buttons

on both sides (1) and unplug it by pulling out horizontally (2).

Do not forcibly insert or remove. May cause damage to the

external connector terminal and the connector.

Pull the adapter out of the outlet or cigarette lighter socket if it will

not be used for a long time.

Do not forcefully pull the external connector terminal cover. May

damage the cover.

Do not place objects near the FOMA terminal when charging. May

damage the FOMA terminal. In addition, a display may be damaged when charged in the viewer position.

When using a DC adapter

The DC adapter should only be used in negative grounded

vehicles (12 and 24V DC).

Do not use with the car engine shut off. May drain the car battery. The DC adapter fuse (2A) is a consumable. For replacement,

purchase a new fuse at a local automobile supply shop.

Refer to the FOMA DC Adapter 01/02 user’s guide for details.

Charging by using desktop holder

[Read “Desktop holder SH22 (sold separately) user’s guide” carefully.]

Battery pack can be charged with the FOMA terminal opened or in

the viewer position.

Face the side with the arrows of the AC adapter

connector up and insert it into the connector terminal of the desktop holder (1).

: Keeping the connector parallel with the desktop holder, firmly

push it all the way in until it clicks.

Insert the AC adapter power plug into an outlet (2).

When placing the FOMA terminal in the desktop

holder, Charge start sound is heard, Charging LED illuminates, and charging starts.

: Place the FOMA terminal as the figure shows (3), and push it

in the direction of the arrow (4) until it clicks.

Continued on next page

Before Using the Handset

Connector

(Face the side with

the arrows up)

FOMA AC Adapter 01/02

100V AC outlet

Charging LED

Battery level is still sufficient.

Battery level is low.

Battery is almost empty. Charge the battery.

Battery is empty (Power will turn off soon).

{

Battery pack is being charged.

Battery level

Checking battery level

Checking battery level with sound and display

In the Custom menu, select [Settings]/[General

settings]/[Check status]/[Battery level].

When Charge end sound is heard and charging

LED turns off, charging is complete.

: Hold the desktop holder and lift the FOMA terminal out.

Pull the AC adapter out of the outlet when left unused for a long

period of time.

When Charge start sound is not heard or when charging LED does

not illuminate, check that the FOMA terminal is placed securely in the desktop holder (except when terminal is turned off, Manner mode is set or Charge start sound is Silent).

When placing the FOMA terminal in the desktop holder, be careful

that the strap is not caught in between the handset and the desktop holder.

When the FOMA terminal placed in the desktop holder is set to the

viewer position, operate while holding it so as not to come off from the desktop holder.

Graphic

Sound Three beeps Two beeps One beep

Battery is

Status

: Wait approximately 2 seconds and the display disappears. : The battery level sound is heard at the volume set in Key/Touch

sound (nP. 104).

sufficiently full.

Battery is running low.

Battery is almost empty. Charge the battery.

If battery runs out

Stand-by display

[Battery empty. Unsaved data will be lost. Ending current operation] appears if battery starts to run out (Press t to clear the message). After a while, an alert tone sounds. The warning screen stating that the battery runs out appears, handset operations are disabled and power turns off after approximately 60 seconds. During a voice/Videophone call, the alert tone sounds and [Battery

empty. Unsaved data will be lost. Ending current operation] appears. The call is disconnected after approximately 20 seconds. At the same time, the screen above appears and after approximately 60 seconds, the power turns off.

Alert tone does not sound when Manner mode or Public mode

(Drive mode) is set (Alert tone sounds during a call).

Power ON/OFF

Turning power ON/OFF

Turning power ON

Press H (for 2+ seconds).

: It may take some time for the wakeup screen to appear. : The wakeup screen appears followed by the initial settings

screen. Proceed to Initial setting (nP. 54).

: If initial settings have been completed, the

screen shown on the right appears when power is turned on. This screen is called the “stand-by display”.

Welcome mail

: “Welcome$デコメアニメ%&”

(Welcome$Decome-Anime%&) and “緊急速報「エリアメール」のご案内” (Information of Early Warning “Area Mail”) are saved by default.

: To check a welcome mail: In stand-by,

press t/select the stock icon C (mail message)/t.

• For details on the following operations nP. 154

If initial settings are not yet completed, the setting screen appears

every time the power is turned on.

If the FOMA card is not inserted, [Insert UIM] and a FOMA card

error appear (nP. 31). When [Enter PIN1 code] appears, enter the PIN1 code (nP. 125).

When a FOMA card is replaced with a new card, the terminal

security code (four to eight digits) must be entered after turning on the terminal. If a correct terminal security code is entered, stand-by display appears. When a wrong terminal security code is entered five times, the power is turned off. However, turning on the power again is possible.

When A appears, the handset is outside the service area or in a

place with no signal. Move to a place where the icon disappears.

Turning power OFF

Press H (for 2+ seconds).

: It may take some time for the power to be turned off (The end

screen appears on the display until the power is turned off).

Before Using the Handset

Select language

Changing screen display to English

Before Using the Handset

In the Custom menu, select [設定]/[一般設定]/

[Bilingual]/[English].

: To switch the display language from English to Japanese: In the

Custom menu, select [Settings]/[General settings]/[Select language]/[日本語].

If a FOMA card is inserted, settings are saved to the FOMA card

as well. When the setting of the FOMA terminal handset and the setting of the inserted FOMA card are different, the setting in the FOMA card is prioritized.

Initial setting

Making initial setting

The initial settings screen appears automatically when the power is turned on for the first time. Each setting item can also be set from Menu (When the initial settings are complete, the stand-by display appears).

 Date and time settings  Change terminal security code

 Key/Touch sound  Location request menu

 Font size settings

When items that have not been set remain, the setting screen

appears every time the power is turned on.

Set the date and time (nP. 54).

Set the Key/Touch sound (nP. 104).

Set GPS Location provision ON/OFF (nP. 318).

Set the font size (nP. 119).

: When the initial settings are complete, the software update

function confirmation screen appears. Read the description and select [Agree] (When the initial settings are made from the menu or the software update is set to other than [auto-update], the confirmation screen does not appear).

Press H to cancel the initial settings.

Date settings

Setting date and time

Set the date and time on the FOMA terminal.

In the Custom menu, select

[Settings]/[General settings]/ [Date settings].

Select the [Auto time correction] field/t/select

the setting.

; Select [ON]/i. ; Select [OFF]/select the [Date] field/t/enter the date/

t/select the [Time] field/t/enter the time (24-hour format)/t/i.

• When entering month, day and time, add 0 before numbers one through nine (example: 01, 02, 03, etc.).

• Set the date and time from 00:00 January 1, 2001 to 23:59 December 31, 2050.

When Limit settings is set to [Enable], the terminal security code

must be entered in the Date settings.

The date and time that are set are saved even if the battery pack is

removed, but if the battery pack remains removed for approximately 30 seconds or more, the settings are reset. Also, if the battery remains empty, the settings may be reset. When this happens, set again after charging the battery.

If the date and time are not set correctly, the following functions

cannot be used properly.

 Redial, Received calls  Auto power ON/OFF  Alarm  Schedule  SSL (authentication)  i-appli Auto start  Starting i-appliDX  Reception, Recording  Machi-chara  Software update  Pattern definitions update  Record message (voice), Record message (Videophone calls)  Camera image titles/shooting date  Playback of i-motion or music data with expiration date/period

for replay.

 View of e-books/e-dictionaries/e-comics with expiration date/

period for browse.

When Auto time correction is set to [ON]

When the power is turned on, the FOMA terminal adjusts the time

by connecting to the network’s time information.

If the FOMA terminal does not adjust the time even when the

power is turned on, turn off the power and restart.

Time may not be adjusted depending on the signal status. Time may be off by a few seconds. When time difference is adjusted overseas, the local time and date

and ! appear in Redial, Received calls, Received/Sent messages history (SMS only), and Received/Sent messages list. The received/sent messages are not displayed in order of the displayed time and date but the mail reception/send.

! does not appear in the Unsent messages for mail messages. If

the date order display is set for the Unsent messages, unsent messages are displayed in the order of the displayed time and date.

Time correction may not be performed depending on the overseas

network.

During overseas use, Japan time and local time (or time set in

City) appear in the dual display except for the following cases.  When Auto time correction is set to [ON] and time correction

information is not being received from an overseas network

 When Auto time correction is set to [OFF] and City is set to the

city in the same time zone as Japan

■ Changing time zone manually <City>

In the Date settings screen, select the [Auto time

correction] field/t/[OFF]/C. Select a time zone/t.

Select a city/t/i.

Notify caller ID

Notifying the other party of your phone number

Display your number (caller ID) on the other party’s phone (display) when making a voice/Videophone/PushTalk call.

Handset number (caller ID) is important personal information. Be

very careful about your caller ID setting.

The Notify caller ID function is available only on compatible phone

devices.

Before Using the Handset

Setting Notify caller ID/No caller ID in advance

In the Custom menu, select [Settings]/[NW

Before Using the Handset

Services]/[Notify caller ID].

Select [Activate/Deactivate].

: To check the setting: Select [Check setting].

Select the setting.

: To notify caller ID: Select [Yes]. : To not notify caller ID: Select [No].

Notify caller ID setting cannot be set from outside the service area.

Own number

Checking your own phone number

When checking your own phone number during a call nP. 59

In the Custom menu, press 0.

: Alternatively, select [Phone]/[Owner Information]. : To switch between Number A and Number B (when 2in1 [Dual

mode] is used): Press i.

When changing the Number B of 2in1, use any of the following

methods to obtain the correct Number B.  Set 2in1 function OFF and then perform 2in1 setting again to

set 2in1 function ON

 Check the 2in1 subscription

When a FOMA card exchange (2in1 subscriber b 2in1

nonsubscriber) is performed, set 2in1 function OFF.

When a FOMA card exchange (2in1 subscriber b 2in1

subscriber) is performed, check the 2in1 subscription.

For details on Owner information nP. 395

Outline of international roaming (WORLD WING)

International roaming (WORLD WING) is a service that enables you, using overseas telecommunications carrier’s networks, to make calls and use i-mode. Use this FOMA terminal for voice/Videophone calls, i-mode and SMS with the phone number and mail address used in Japan. Network services such as Voice Mail and Call Forwarding Services can also be used.

This service is available in the 3G network and GSM/GPRS network

service areas. Refer to the DOCOMO “International Services website” for details on the area.

By default, the FOMA terminal is set to automatically switch

networks (nP. 444).

Overseas Use

Country codes of major countries

The following shows “Country code” used when making international calls (nP. 65) or setting International dial assist (nP. 66). For other country codes and details, refer to the DOCOMO

“International Services website”.

Country/Region Code Country/Region Code

Australia 61 Maldives 960 Austria 43 Netherlands 31 Belgium 32 New Caledonia 687 Brazil 55 New Zealand 64 Canada 1 Norway 47 China 86 Peru 51 Czech 420 Philippines 63 Egypt 20 Russia 7 Fiji 679 Singapore 65 Finland 358 South Korea 82 France 33 Spain 34 Germany 49 Sweden 46 Greece 30 Switzerland 41 Hong Kong 852 Tahiti Hungary 36 India 91 Taiwan 886 Indonesia 62 Thailand 66 Italy 39 Turkey 90 Japan 81 U.K. 44 Macau 853 U.S.A. 1 Malaysia 60 Vietnam 84

(French Polynesia)

689

438

Available services overseas

The available communication services overseas are as follows.

Communication

service

Voice call Make or receive calls in your

Videophone Make international Videophone

i-mode mail Send or receive i-mode mail

i-mode Use i-mode overseas. ABA i-Channel Use i-Channel overseas. ABA i-concier Use i-concier overseas. ABA i-Widget Use i-Widget overseas. ABA SMS Send or receive SMS overseas

Data communication (packet transmission)

Some communication services are not available depending on the

network/carrier. Refer to the DOCOMO “International Services website” for details.

Explanation 3G GSM

country of stay or make international calls to Japan or to other countries with the same phone number as used in Japan while abroad.

calls to users of the specified 3G telecommunications carriers overseas and FOMA users in Japan.

overseas with the same address as used in Japan.

with the same phone number as used in Japan.

Use packet transmission overseas.

GPRS

AAA

ABB

ABA

AAA

ABA

Packet transmission charges are separately incurred for the transmission included in monthly usage fees of i-Channel (

If Widget appli attempts transmission when the i-Widget screen

appears, packet transmission charges are incurred for each transmission overseas.

Unable to use 64K data communication by connecting a PC, etc.

overseas.

日英版しゃべって翻訳 for SH (J-E Speech Translation for SH) is

available overseas (nP. 280).

GPS function is not available overseas. An error screen appears

and packet transmission charges are incurred when the site of GPS Service settings is accessed overseas. Overseas packet transmission charges differ from those in Japan. When the 2in1 is used, calling from Number B is not available overseas.

When Multi Number is used, calling from Additional Number is not

available overseas.

P. 194) overseas.

Before use overseas

The following items must be checked before departure, at your country of stay, and after homecoming.

Preparation before departure

Prepare below in Japan before using the FOMA terminal overseas.

■ About contract

If subscribed to the FOMA service after September 1, 2005, a subscription for “WORLD WING” is not required. However, if a subscription for “WORLD WING” is canceled at or after a subscription for the FOMA service, a subscription for “WORLD WING” is required again.

If subscribed to the FOMA service before August 31, 2005 but not

subscribed to “WORLD WING”, a subscription for “WORLD WING” is required. Some payment plans are not available.

Overseas Use

Continued on next page

439

Insert the WORLD WING compatible FOMA card (other than blue)

to the FOMA terminal (nP. 44).

■ About charging batteries

Precautions for handling the AC adapter nP. 16 Methods for charging the AC adapter nP. 48

■ About browsing i-mode sites

To browse i-mode site overseas, the settings for overseas use must be made from iMenu in advance. i-mode site: Select [iMenu]/[English]/[Options]/[International Settings]/[i-mode services Settings]. Refer to “Mobile Phone User’s Guide [International Services]” and

“Mobile Phone User’s Guide [i-mode] FOMA version” for details.

■ About setting network service

If subscribed to network services, Voice Mail Service, Call Forwarding Service or other services can be used overseas. Some network services may not be set or checked depending on

overseas telecommunications carrier. In addition, some network services are available only in Japan. Refer to “Mobile Phone User’s Guide [International Services]” and “Mobile Phone User’s Guide

Overseas Use

[Network Services]” before departure.

To use network services overseas, set Remote Control (nP. 430,

P. 446) to “Activate”.

■ About inquiries overseas

For lost, stolen, and cost settlement, or malfunction of the FOMA terminal overseas, refer to “Loss or theft of FOMA terminal or payment of cumulative cost overseas” or “Failures encountered overseas” on the back of this manual. Note that any call or transmission charges incurred after the FOMA terminal is lost or stolen are charged to the subscriber.

Add the “International call access code (Table 1)” or “International prefix number for the universal number (Table 2)” that is assigned to your country of stay, to the head of your phone number for inquiries.

For the latest information of the international call access code and

the international prefix number for the universal number, refer to the DOCOMO “International Services website”.

International call access codes of major countries (Table 1)

The following shows the International call access codes of major countries. Communication charges to Japan will apply.

Country/Region Code Country/Region Code

Australia 0011 Monaco 00 Belgium 00 Netherlands 00 Brazil 0021/

0014

Canada 011 Philippines 00 China 00 Poland 00 Czech 00 Portugal 00 Denmark 00 Russia 810 Finland 00 Singapore 001 France 00 South Korea 001 Germany 00 Spain 00 Greece 00 Sweden 00 Hong Kong 001 Switzerland 00 Hungary 00 Taiwan 002 India 00 Thailand 001 Indonesia 001 Turkey 00 Ireland 00 U.A.E. 00 Italy 00 U.K. 00 Luxemburg 00 U.S.A. 011 Macau 00 Vietnam 00 Malaysia 00

New Zealand 00 Norway 00

440

International prefix number for the universal number (Table 2)

The following shows the International prefix number for the universal number of each country. Communication charges or other charges to your country of stay

will apply.

Communication charges to your country of stay will apply when

calling from the mobile phone.

Country/Region Code Country/Region Code

Argentina 00 Luxemburg 00 Australia 0011 Malaysia 00 Austria 00 Netherlands 00 Belgium 00 New Zealand 00 Brazil 0021 Norway 00 Bulgaria 00 Peru 00 Canada 011 Philippines 00 China 00 Portugal 00 Columbia 009 Singapore 001 Denmark 00 South Africa 09 Finland 990 South Korea 001 France 00 Spain 00 Germany 00 Sweden 00 Hong Kong 001 Switzerland 00 Hungary 00 Taiwan 00 Ireland 00 Thailand 001 Israel 014 U.K. 00 Italy 00 U.S.A. 011

Some codes may not be used. Note that the universal number may not be used for calls from a

mobile phone, payphone or hotel.

The universal number can be used only for countries listed above.

Calling from a hotel may cost you extra call charges requested by

the hotel (You are responsible for the call charges). Confirm with the hotel before making calls.

Using at your country of stay

The service is available in the 3G network and GSM/GPRS network service areas. The FOMA terminal is set to automatically search for the network when the power is turned on, and to be connected to the available telecommunications carrier in your country of stay. If the connected telecommunications carrier is changed when Auto

time correction (nP. 54) is set to [ON], a screen notifying that time difference is adjusted may appear.

When Operator name display (nP. 445) is set to [Display on], the

telecommunications carrier connected appears in stand-by.

When Clock display (nP. 109) is set to [ON(Large)], the local time

and Japan time appear (excluding regions keeping the same standard time as Japan time). The local time appears on the sub display.

Talk time or stand-by time may be reduced to half the normal time

depending on the network condition of your country of stay.

Overseas Use

Setting after homecoming

By default, the FOMA terminal is set to automatically search for the network and to be connected to the FOMA network when the power is turned on after homecoming. Reset the Network search mode to the FOMA network (DOCOMO). If the Network search mode is set to [Manual], switch to the FOMA

network (DOCOMO) manually or change to [Auto].

Set the 3G/GSM setting to [AUTO] or [3G].

441

Making a call at your country of stay

Make a call from overseas using the international roaming service.

Making a call outside your country of stay (including Japan)

Make a call from your country of stay to Japan or other countries.

In stand-by, enter [+] (press 0 for 1+ seconds),

country code, area code (city code) and other party’s phone number.

: When the area code (city code) begins with 0, omit the 0 when

dialing (However, include 0 when making a call to landline phones in some countries or regions such as Italy).

Press s (Phone)/i (V.phone).

■ Making an international call outside your country

of stay using Country code conversion

Set Country code conversion (nP. 66) to [ON] and set the country

Overseas Use

code frequently called to easily make an international call. 0 at the beginning of a phone number is automatically converted to

the country code set in Country code conversion.

Example: Make a call from phonebook

In stand-by, press a/select the other party.

Press s (Phone)/i (V.phone).

Select [Call].

: To dial a phone number as stored in the phonebook: Select

[Original number].

■ Making a call to the phone in country saved in Set

country code

Save a country code using Set country code (nP. 67) to select a country code before making an international call. The following operation is available overseas only.

In stand-by, enter a phone number/C/[Add

prefix setting]/[International Call]. Select the country code/ t.

Press s (Phone)/i (V.phone).

Making a call in your country of stay

Make a domestic call at your country of stay in the same way as you do in Japan.

In stand-by, enter a phone number.

Press s (Phone)/i (V.phone).

: Always dial the area code (city code), even when the number is

in the same area.

: When making a domestic call at your country of stay using the

phonebook, select [Original number] in step 3 of “Making an international call outside your country of stay using Country code conversion” on P. 442.

Refer to the DOCOMO “International Services website” for details

on available countries, country codes and telecommunications carriers.

Even when Notify caller ID of the network service (nP. 55) is set

to “Send ID”, [Unavailable] or [User unset] appears depending on the telecommunications carrier, and the caller ID may not be displayed correctly.

442

Making a call to a WORLD WING subscriber overseas

When making a call to a “WORLD WING” subscriber overseas, make an international call to Japan regardless of your country of stay.

In stand-by, enter [+] (press 0 for 1+ seconds),

country code 81 (Japan), the other party’s mobile phone number excluding 0.

Press s (Phone)/i (V.phone).

Receiving a call overseas

Receive a call overseas in the same way as you do in Japan.

Press s to receive an incoming call.

: Speak to the caller.

Even when a caller tried to notify of caller ID, it might not be

notified depending on the used telecommunications carrier.

When a call is received during international roaming, the call is

forwarded from Japan. Call charges to Japan are incurred by the caller and receiving charges by the receiver.

Having calls to your FOMA terminal

■ Having calls made to your FOMA terminal from

Japan

To receive an international call from Japan, have your phone number dialed just as a domestic call in Japan. 090 (or 080)-XXXX-XXXX Calling from Received calls may not be available since the phone

number may not be displayed correctly.

■ Having calls made to your FOMA terminal from

countries other than Japan

Have the international call access code and 81 (Japan) added to the beginning of your phone number, and 0 excluded as an international call to Japan regardless of your country of stay. International call access code of the country of the caller-81-90 (or 80)-XXXX-XXXX

3G/GSM setting

Setting network communication system

Set the communication system supporting your area and telecommunications carrier.

In the Custom menu, select [Settings]/[Phone

settings]/[Other settings]/[International Roam.]/[3G/GSM setting].

Select the communication method/t.

Overseas Use

443

Network search mode

Setting a search method of telecommunications carrier

Set to manually select a telecommunications carrier. Re-search a network to set another telecommunications carrier. Check that the Network search mode is set to [Auto] when A

appears even after homecoming.

In the Custom menu, select [Settings]/[Phone

settings]/[Other settings]/[International Roam.]/[Network search mode].

Select the setting.

; Select [Auto]/[Yes].

• When [Auto] is set: Select [Auto].

; Select [Manual]/select a telecommunications carrier/t.

• The telecommunications carrier is changed.

; Select [Network re-search].

• The host network is changed automatically if the Network search mode is set to [Auto]. If set to [Manual], select a

Overseas Use

telecommunications carrier and press t.

Checking communication services available

<In-area status>

Check the status whether making a call, data transmission or packet transmission is available.

In the Custom menu, select [Settings]/[Phone

settings]/[Other settings]/[In-area status]/ [Agree].

PLMN setting

Setting a telecommunications carrier to preferentially connect to

Specify the priority order of telecommunications carriers connected to when the Network search mode is set to [Auto]. Save up to 20.

In the Custom menu, select [Settings]/[Phone

settings]/[Other settings]/[International Roam.]/[Network search mode]/[PLMN setting].

: To check the saved telecommunications carrier’s detailed

information: Select the telecommunications carrier/t.

Select the number of the priority order/C.

Select the saving method.

; Select [PLMN manual select]/enter a country code

(MCC)/t/enter a network code (MNC)/t/select a communication method/t.

; Select [UPLMN by list]/select a telecommunications

carrier/t/select a communication method/t.

• To search a telecommunications carrier from country name:

Select [UPLMN by list]/C/select a country name/t/ select a telecommunications carrier/t/select a communication method/t.

; Select [Set VPLMN to PLMN].

• Save the telecommunications carrier currently connected to.

; Select [Change priority]/select a destination/t. ; Select [Delete]/[Delete one]. ; Select [Delete]/[Delete all]/enter the terminal security

code/t.

Select [Yes].

444

Operator name disp

Telecommunications carrier name

Displaying a telecommunications carrier during roaming

Set whether to display a telecommunications carrier name currently connected to in stand-by during international roaming.

In the Custom menu, select [Settings]/[Phone

settings]/[Other settings]/[International Roam.]/[Operator name disp].

Select the setting/t/[Yes].

■ When displaying a telecommunications carrier

Roaming guidance

Activating roaming guidance

When a call is received during international roaming, the caller hears the guidance stating that international roaming is activated.

Make this setting while still in Japan.

In the Custom menu, select [Settings]/[Other NW

Services]/[Roaming guidance]. Select an item/t.

Select [Yes].

Call barring

Setting incoming call to reject during roaming

Set the FOMA terminal to reject calls during roaming. Select whether to bar all incoming calls or only the Videophone and 64K data communication calls.

Depending on the overseas telecommunications carrier, the setting

cannot be made.

Unable to use 64K data communication overseas.

In the Custom menu, select [Settings]/[Phone

settings]/[Other settings]/[International Roam.]/[Call barring].

Select an item.

; Select [Activate]/[Yes]/select the barring method/t/

enter the network security code/t.

; Select [Deactivate]/[Yes]/enter the network security

code/t.

; Select [Check setting].

Overseas Use

445

Sharp HRO00082 Users Manual

Specifications and Main Features

Frequently Asked Questions

User Manual