Sharp HRO00077 User Manual
i
First Step Guide
See Online English Manual for "Safety Precautions."
Before Using Handset ii
Handset Functions vii
General Notes xii
Customer Service xv
Accessory
Battery (SHBCC1)
Battery Installation
Remove cover
Press and slide as shown.
.
Insert battery
Close cover
Charging
Use specified AC Charger ZTDAA1 (sold
separately) only.
Small Light
External
Device Port
Port Cover
AC 100V Outlet
Blades
AC Charger
Release
Tabs
Charger Connector
Arrows
1
2
3
Open Port Cover to connect
AC Charger
Plug AC Charger into AC
outlet
Small Light illuminates red while
.
charging.
Small Light goes out when battery is
.
full.
After charging, unplug AC
Charger, then disconnect
handset
Before Using Handset
ii
USIM Card Installation
Notch
Slide in USIM Card with IC
chip facing up
Insert battery (P.ii)
First power off handset and remove
.
battery.
Do not force USIM Card into/out of
.
handset.
USIM Card must be inserted to use
.
handset.
USIM PINs
PIN
■
4-digit code; activate PIN Entry to restrict
usage.
PIN2
■
Required to clear Call Costs and to set
Max Cost.
PIN and PIN2,
9999
by default, are
changeable.
PIN Lock & Cancellation (PUK Code*)
■
Entering incorrect PIN or PIN2 three
consecutive times locks USIM Card,
disabling handset. Enter PUK Code to
unlock. For details, contact SoftBank
Customer Center, General Information.
USIM Personal Unblocking Key (PUK *
Code) unblocks a USIM Card blocked
after the wrong PIN has been entered
three consecutive times. Each USIM
C
ard has a unique PUK Code. Do not
disclose it to unauthorized persons.
iii
iv
Manner Mode
Minding Mobile Manners
■
Please use handset responsibly. Inappropriate
handset use can be both dangerous and
bothersome. Please take care not to disturb
others when using handset. Adjust handset
use according to your surroundings.
Activating/Canceling Manner Mode
)
,
(Long)
Security Codes
Handset Code
■
9999
by default; use or change some
functions.
Center Access Code
■
4-digit code selected at contract; access
Optional Services via landlines or change
contract details.
Network Password
■
4-digit code selected at contract; restrict
incoming/outgoing calls (Call Barring).
Message appears for incorrect code
.
entries; retry.
If Network Password is incorrectly
.
entered three times consecutively, Call
Barring settings are locked. To resolve,
Network Password and Center Access
Code must be changed. For details,
contact SoftBank Customer Center,
General Information.
Specifications
Weight* 110
g
Continuous
Talk Time*
230 minutes (3G)
210 minutes (GSM)
Continuous
Standby Time*
(handset closed)
300 hours (3G)
270 hours (GSM)
Charging Time*
(power off)
AC Charger: 135 minutes
In-Car Charger: 140 minutes
Dimensions*
(W x H x D)
48 x 105 x 15.2 mm
(handset closed, without
protruding parts)
Maximum
Output
0.25 W (3G)
2.0 W (GSM)
Values calculated with battery installed.
.
*Approximate value
Before Using Handset
Display Indicators & Key Assignments
Signal strength Manner mode active
Packet transmission available (3G) Battery strength
Packet transmission available (GSM) New Voicemail
Unread mail Alarm set
Memory Card in use
B
Open Messaging menu or
execute Softkey functions
'
Open Shortcuts menu. In
text entry windows, toggle
upper/lower case
$
Delete entries, escape/
return to previous window
!
Initiate/answer calls
1
|
#
Enter numbers/characters
~
Open Dictionary
)
Select handset mode
Multi Selector
Select menu items, move cursor,
or scroll pages, etc. Multi
Selector operations are
indicated in this guide as shown
below:
%
: Press the center
c
: Press the left side
d
: Press the right side
b
: Press the bottom
A
Open Yahoo! Keitai Main
Menu or execute Softkey
functions
&
Activate TV or switch entry
mode
"
Turn handset power on/off
Side Keys
Side Key operations are indicated
in this guide as shown below:
I
(Long): Long Press
I
L
: Press E or
F
|
Activate mobile camera
v
Loading...