Sharp GS-XP07FR, GS-XP09FR, GS-XP12FR, GS-XP18FR, GS-XP24FR Operating Manual

...

GS-XP07FR

Air Conditioner

GS-XP09FR GS-XP12FR GS-XP18FR GS-XP24FR GS-XP27FR

FLOOR/CEILING TYPE ROOM AIR CONDITIONER

OPERATION MANUAL

TIPO DE SUELO/TECHO ACONDICIONADOR DE AIRE PARA HABITACIÓN

MANUAL DE INSTRUCCIONES

ENGLISH

ESPAÑOL

• Uses ozone layer friendly refrigerant R410A.

• Utiliza refrigerante R410A que no daña la capa de ozono.

• Utilizza il refrigerante R410A che non danneggia il buco nell’ozono.

• Usa refrigerante R410A amigo da camada de ozono.

• Utilise un réfrigérant qui n’attaque pas la couche d’ozone, le R410A.

INDOOR UNIT UNIDAD INTERIOR UNITA' INTERNA UNIDADE INTERIOR UNITE INTERIEURE

GS-XP07FR GS-XP09FR GS-XP12FR GS-XP18FR GS-XP24FR GS-XP27FR

OUTDOOR UNIT UNIDAD EXTERIOR UNITA' ESTERNA UNIDADE EXTERIOR UNITE EXTERIEURE

AE-X7FR AE-X9FR AE-X12FR GU-XR18FR GU-XR24FR GU-XR27FR

TIPO DI PAVIMENTO/SOFFITT O CONDIZIONATORE D’ARIA PER ABITAZIONI

MANUALE DI ISTRUZIONE

TIPO CHÃO/TECTO AR CONDICIONADO DE SALA

MANUAL DE INSTRUÇÕES

CLIMATISEUR DOMESTIQUE DE TYPE AU SOL/PLAFOND

NOTICE D'UTILISATION

ITALIANO

PORTUGUÊS

FRANÇAIS

* Plasmacluster is trademark of SHARP

Corporation.

Attention: Your product is marked with this symbol. It means that used electrical and electronic products should not be mixed with general household waste. There is a separate collection system for these products.

A. Information on Disposal for Users (private households)

1. In the European Union

Attention: If you want to dispose of this equipment, please do not use the ordinary dust bin!

Used electrical and electronic equipment must be treated separately and in accordance with legislation that requires proper treatment, recovery and recycling of used electrical and electronic equipment. Following the implementation by member states, private households within the EU states may return their used electrical and electronic equipment to designated collection facilities free of charge*. In some countries* your local retailer may also take back your old product free of charge if you purchase a similar new one.

*) Please contact your local authority for further details.

If your used electrical or electronic equipment has batteries or accumulators, please dispose of these separately beforehand according to local requirements .

By disposing of this product correctly you will help ensure that the waste undergoes the necessary treatment, recovery and recycling and thus prevent potential negative effects on the environment and human health which could otherwise arise due to inappropriate waste handling.

2. In other Countries outside the EU

If you wish to discard this product, please contact your local authorities and ask for the correct method of disposal.

For Switzerland: Used electrical or electronic equipment can be returned free of charge to the dealer, even if you don’t purchase a new product. Further collection facilities are listed on the homepage of

. Information on Disposal for Business Users.

www.swico.ch o r www. s e n s . c h.

1. In the European Union

If the product is used for business purposes and you want to discard it: Please contact your SHARP dealer who will inform you about the take-back of the

product. You might be charged for the costs arising from take-back and recycling. Small products (and small amounts) might be taken back by your local collection facilities.

For Spain: Please contact the established collection system or your local authority for take-back of your used products.

2. In other Countries outside the EU

If you wish to discard of this product, please contact your local authorities and ask for the correct method of disposal.

ENGLISH

Thank you for purchasing a SHARP air conditioner. Please read this manual carefully before operating the product.

CONTENTS

• IMPORTANT SAFETY INSTRUCTIONS.....E-1

•

ADDITIONAL NOTES ON OPERATION .............

• TIPS ON SAVING ENERGY ........................E-3

• PART NAMES..............................................E-4

• USING THE REMOTE CONTROL ..............E-6

• BASIC OPERATION ....................................E-8

•

ADJUSTING THE AIR FLOW DIRECTION .........

• FULL POWER OPERATION .......................E-11

E-3

E-10

• ONE-HOUR OFF TIMER ..................... E-11

• TIMER OPERATION............................ E-12

• TIPS ABOUT PLASMACLUSTER

OPERATION........................................ E-14

• PLASMACLUSTER OPERATION ....... E-14

• AUXILIARY MODE .............................. E-15

• MAINTENANCE ................................... E-15

• BEFORE CALLING FOR SERVICE .... E-17

IMPORTANT SAFETY INSTRUCTIONS

WARNINGS FOR USE

Do not pull or deform the power supply cord. Pulling and misuse of the power supply cord

can result in damage to the unit and cause electrical shock. Be careful not to expose your body directly to the outlet air for a long time. It may affect

your physical conditions. When using the air conditioner for infants, children, elderly, bedridden, or disabled people

make sure the room temperature is suitable for those in the room.

ENGLISH

Never insert objects into the unit. Inserting objects can result in injury due to the high

speed rotation of internal fans. Ground the air conditioner without fail. Do not connect the grounding wire to gas pipe,

water pipe, lightning rod or telephone grounding wire. Incomplete grounding may cause electric shock.

If anything is abnormal with the air conditioner (ex. a burning smell), stop the operation

immediately and turn the circuit breaker OFF. The appliance shall be installed in accordance with national wiring regulations. Improper

cable connection can cause the power supply cord, plug and the electrical outlet to overheat and cause fire.

If the supply cord is damaged, it must be replaced by the manufacturer or its service agent

or a similarly qualified person in order to avoid a hazard. Use only the manufacturespecified power cord for replacement.

WARNINGS FOR INSTALLATION / REMOVAL / REPAIR

• Do not attempt to install/remove/repair the unit by yourself. Incorrect work will cause electric shock, water leak, fire etc. Consult your dealer or other qualified service personnel for the installation/removal/repair of the unit.

This equipment complies with the requirements of Directives 89/336/EEC and 73/23/ EEC as amended by 93/68/EEC.

E-1

IMPORTANT SAFETY INSTRUCTIONS

CAUTIONS FOR USE

Open a window or door periodically to ventilate the room, especially when using gas

appliances. Insufficient ventilation may cause oxygen shortage. Do not operate the buttons with wet hand. It may cause electric shock.

For safety, turn the circuit breaker off when not using the unit for an extended period of

time. Check the outdoor unit mounting rack periodically for wear and to make sure it is firmly

in place. Do not put anything on the outdoor unit nor step on it. The object or the person may fall

down or drop, causing injury. This unit is designed for residential use. Do not use for other applications such as in a

kennel or greenhouse to raise animals or grow plants. Do not place a vessel with water on the unit. If water penetrates into the unit, electrical

insulations may deteriorate and cause electric shock. Do not block the air inlets nor outlets of the unit. It may cause insufficient performance

or troubles. Be sure to stop the operation and turn the circuit breaker off before performing any

maintenance or cleaning. A fan is rotating inside the unit and you may get injured. Do not splash or pour water directly on the unit. Water can cause electrical shock or

equipment damage. This appliance is not intended for use by young children or infirm persons without

supervision. Young children should be supervised to ensure that they do not play with the appliance.

CAUTIONS FOR LOCATION / INSTALLATION

• Make sure to connect the air conditioner to power supply of the rated voltage and frequency.

Use of a power supply with improper voltage and frequency can result in equipment damage and possible fire.

• Do not install the unit in a place where inflammable gas may leak. It may cause fire. Install the unit in a place with minimal dust, fumes and moisture in the air.

• Arrange the drain hose to ensure smooth drainage. Insufficient drainage may cause wetting of the room, furniture etc.

• Make sure a leak breaker or a circuit breaker is installed, depending on the installation location, to avoid electrical shock.

E-2

ADDITIONAL NOTES ON OPERATION

OPERATING TEMPERATURE RANGE

INDOOR TEMP. OUTDOOR TEMP.

COOLING

HEATING

D.B. = Dry-bulb W.B. = Wet-bulb

• The built-in protective device may prevent the unit from operating when used out of this range.

• Condensation may form on the air outlet if the unit operates continuously in the COOL or DRY mode when humidity is over 80 percent.

upper limit lower limit upper limit lower limit

WHEN POWER FAILURE OCCURS

This air conditioner has a memory function to store settings when a power failure occurs. After power recovery, the unit will automatically re-start in the same settings which were active before the power failure, except for timer settings. If the timers were set before a power failure, they will need to be re-set after power recovery.

PREHEATING FUNCTION

In the HEAT operation, the indoor fan may not start for two to five minutes after the unit is turned on to prevent cold air from blowing out of the unit.

32˚C D.B. 43˚C D.B.

23˚C W.B. -

21˚C D.B. 21˚C D.B.

15˚C W.B. -

27˚C D.B. 24˚C D.B.

- 18˚C W.B.

20˚C D.B. -7˚C D.B.

- -8˚C W.B.

ENGLISH

DE-ICING FUNCTION

• When ice forms on the heat exchanger in the outdoor unit during the HEAT operation, an automatic de-icer provides heat for about 5 to 10 minutes to remove the ice. During de-icing, the inside and outside fans stop operating.

• After de-icing is completed, the unit automatically resumes operation in the HEAT mode.

HEATING EFFICIENCY

• The unit employs a heat pump that draws heat from the outside air and releases it into the room. The outside air temperature therefore greatly affects the heating efficiency.

• If the heating efficiency is reduced due to low outside temperatures, use an additional heater.

• It takes time to warm up and heat the entire room because of the forced air circulation system.

TIPS ON SAVING ENERGY

Below are some simple ways to save energy when you use your air conditioner.

SET THE CORRECT TEMPERATURE

• Setting the thermostat 1°C higher than the desired temperature in the COOL mode and 2°C lower in the HEAT mode will save approximately 10 percent in power consumption.

• Setting the temperature lower than necessary during cooling operation will result in increased power consumption.

BLOCK DIRECT SUNLIGHT AND PREVENT DRAFTS

• Blocking direct sunlight during cooling operation will reduce power consumption.

• Close the windows and doors during cooling and heating operations.

SET PROPER AIR FLOW DIRECTION TO OBTAIN THE BEST AIR CIRCULATION

KEEP FILTER CLEAN TO ENSURE THE MOST EFFICIENT OPERATION MAKE MOST OF THE TIMER OFF FUNCTION DISCONNECT THE POWER CORD WHEN THE UNIT IS NOT USED FOR AN

EXTENDED PERIOD OF TIME

• The indoor unit still consumes a small amount of power when it is not operating.

E-3

PART NAMES

INDOOR UNIT

(When installed on the floor)

1 2 3

6 7

1 Outlet (Air) 2 Vertical Adjustment Louvres 3 Horizontal Adjustment

Louvres

4 Indicator Panel 5 Air Filters 6 Intake Grille 7 Inlet (Air) 8 Remote Control 9 OPERATION Lamp (red ) 0 TIMER Lamp (orange ) q PLASMACLUSTER Lamp

(blue)

w RECEIVER Window e AUX. Button

(When installed on the ceiling)

OUTDOOR UNIT

AE-X7FR AE-X9FR AE-X12FR

AUX.

t y

9 0 q

GU-XR18FR GU-XR24FR GU-XR27FR

r Inlet (Air) t Interconnecting Cord and

Refrigerant Tube

y Drainage Hose u Outlet (Air)

NOTE: Actual units might vary slightly from those shown above.

E-4

+ 14 hidden pages