Date: Jan. 17, 1995
ELECTRONIC TYPEWRITER: FW-600/700
No. : ETE-300
[Service information]
1. CORRECTION OF THE PARTS GUIDE
2. ADDITION OF DOUBLE-SIDED ADHESIVE TAPE TO THE
SPRING PLATE
3. CORRECTION OF THE SERVICE MANUAL
1. CORRECTION OF THE PARTS GUIDE
1) Model name: FW-600/700
2) General: Some misprints found in the parts guides have been corrected as follows.
3) Description:
No.
Model
name
P/G No.
Before changing Changed
Parts code
Price
rank
Parts name Note
1 FW-600
2 FW-700
FW-600
3
FW-700
FW-600
4
FW-700
FW-600
5
FW-700
6
FW-600
7 FW-600
FW-600
8
FW-700
2 - 1 PGUMS5053BCZZ PGUMS5053BCZA
2 - 1 PGUMS5051BCZZ PGUMS5051BCZA
2 - 5 MLEVP5107HHZA MLEVP5107HHZB
2 - 6 MSPRT5224HHZZ MSPRT5224HHZA
2 - 8 MLEVP5106HHZA MLEVP5106HHZB
2 - 17 LPLTP5119BCZZ LPLTP5119BCZA
2 - 18 PSHEZ5082HHZZ PSHEZ5082HHZB
5
—
SPAKA6018HHZZ
AB
Rubber B
AC
Rubber B
AC
Lock knob L
AB
Lock knob spring
AC
Lock knob R
Light conductive
AV
plate with side seal
AH
Scatter sheet
AA
Vinyl sheet
—
—
—
—
—
From the Sept. production in 1994
—
—
The positions of No.8 vinyl sheet (SPAKA6018HHZZ) in the above table is shown in the
following figure.
4) Application: From the 1st lot
SHARP CORPORATION
No.8 vinyl sheet (SPAKA6018HHZZ) added
Printer and Scanner Division
1/2
Orange
C
2. ADDITION OF DOUBLE-SIDED ADHESIVE TAPE TO THE SPRING PLATE
1) Model name: FW-600/700
2) General: A piece of double-sided adhesive tape has been added to the spring plate for the purpose of
preventing a possible break of the spring plate by the friction spring, which may go on the rib
of the top cabinet and lock it in assembling the display tilt mechanism, and for strengthening
the parts.
3) Description:
Double-sided adhesive tape sticking
Spring plate
Friction spring
The parts code of the spring plate LPLTM5117HHZZ remains unchanged.
4) Application: From the 1st lot
3. CORRECTION OF THE SERVICE MANUAL
1) Model name: FW-600/700
2) General: The following misprints found in the service manual have been corrected as follows.
1) [5] Disassembly and Reassembly did not have explanation of greasing in assembling.
Refer to the service manual of FW-500 on greasing parts and positions. The marks ∗ in the
[5] Disassembly and Reassembly figures are the greasing positions. The grease designated
is Floil G311S .
2) [6] ADJUSTMENTS (1) Platen unit adjustment
The platen adjusting value has been changed from 0.9 ± 0.1 mm t o 1 .3 ± 0.1 mm.
0.9 should be corrected to 1.3
2/2