Sharp EL-6053S Owner Manual

SPACE

ENTER

SPACE

ENTER

ALARM

PREV

NAME?

harpsec.com

_

SCHEDULE?

MEMO?

NOTICE

• SHARP strongly recommends that separate
permanent written records be kept of all
important data. Data may be lost or altered in
virtually any electronic memory product under
certain circumstances. Therefore, SHARP
assumes no responsibility for data lost or
otherwise rendered unusable whether as a
result of improper use, repairs, defects, battery
replacement, use after the specified battery life
has expired, or any other cause.

In Europe:

This equipment complies with the requirements of
Directive 89/336/EEC as amended by 93/68/EEC.

Dieses Gerät entspricht den Anforderungen der EG­Richtlinie 89/336/EWG mit Änderung 93/68/EWG.

Ce matériel répond aux exigences contenues dans la
directive 89/336/CEE modifiée par la directive 93/68/
CEE.

Dit apparaat voldoet aan de eisen van de richtlijn 89/336/
EEG, gewijzigd door 93/68/EEG.

Dette udstyr overholder kravene i direktiv nr. 89/336/EEC
med tillæg nr. 93/68/EEC.

Quest’ apparecchio è conforme ai requisiti della direttiva
89/336/EEC come emendata dalla direttiva 93/68/EEC.

Note

• This model may not be available in some
countries.

ELECTRONIC ORGANIZER

EL-6053S

OPERATION MANUAL

• SHARP assumes no responsibility, directly or
indirectly, for financial losses or claims from
third persons resulting from the use of this
product and any of its functions, such as stolen
credit card numbers, loss or alteration of stored
data, etc.

• The information provided in this manual is
subject to change without notice.

Η εγκατάσταση αυτή ανταποκρίνεται στις απαιτήσεις
των οδηγιών της Ευρωπαïκής Ενωσης 89/336/ΕΟΚ,
!πως ο κανονισµ!ς αυτ!ς συµπληρώθηκε απ! την
οδηγία 93/68/ΕΟΚ.

Este equipamento obedece às exigências da directiva 89/
336/CEE na sua versão corrigida pela directiva 93/68/
CEE.

Este aparato satisface las exigencias de la Directiva 89/
336/CEE modificada por medio de la 93/68/CEE.

Denna utrustning uppfyller kraven enligt riktlinjen 89/336/
EEC så som kompletteras av 93/68/EEC.

Dette produktet oppfyller betingelsene i direktivet 89/336/
EEC i endringen 93/68/EEC.

Tämä laite täyttää direktiivin 89/336/EEC vaatimukset,
jota on muutettu direktiivillä 93/68/EEC.

3. Using World clock

1. Press

2. Press

CLOCK

once or twice to display World

clock (without “ ”).

PREV

or

desired city.

NEXT

to select the

4. Changing the cities between Home
and World clocks

You can change the home city for a city in another
time zone without adjusting the stored correct
time.

1. Press

2. Press

CLOCK

clock (without “

PREV

once or twice to display World

”).

NEXT

or

and select the

desired city to be set as the new home city.

3. Press

SHIFT SET

to change the cities

between Home and World clocks.

• The previous home city is now set as the
world city (without “

4. Press

CLOCK

to check the home city.

”).

• The selected city in step 2 is set as the home

city (with “

5. Press
press

”).

CLOCK

to recheck the world city, and

PREV

or

NEXT

to select the new

world city, if needed.

5. Setting daylight saving time (DST:

summer time)

1. Press

2. Press

Notes

• DST can be set independently in either Home or

• When DST is set for one world city, it is used

CLOCK

once or twice to display Home

or World clock.

DST

.
“#” is displayed. The time is set 1 hour ahead.
To clear DST, press

DST

to clear “#”. The time

is set 1 hour behind.

World clock.

for all cities displayed in World clock.

6. Setting alarms

The Organizer has 3 kinds of alarm:

1. Daily alarm ........ beeps every day at the alarm

2. Hourly alarm ...... beeps every hour when

3. Schedule alarm .. beeps at the time for all the

Press any key to stop the alarm beeping.

Setting/Changing the daily alarm time

1. Press

CLOCK

clock (with “ ”).

2. Press

ALARM

display the daily
alarm screen.
(The display differs
between the 12-hour and 24-hour clock.)

3. Press

SHIFT SET

4. Enter the time.

5. Press

ENTER

• The daily alarm time is set.

Turning the alarms on and off

An alarm sounds only when the respective symbol
(

, , or ) is turned on.
Display Home clock (press
and press
screen.
Each time you press
screen is displayed, the combination of symbols
switches.

Note

• Alarms sound even when the Organizer is

turned off.

time (for 1 minute), when

“

” is turned on.

minutes reach “00”, when
“

” is turned on.

schedule entries (for 1
minute), when “
turned on. (Refer to
“Schedule Mode”.)

once or twice to display Home

to

ALARM

A12–00

.

.

CLOCK

ALARM

to display the daily alarm

while the daily alarm

” is

once or twice)

q Power ON/OFF key
w Cursor keys
e Search keys
r RESET switch
t Mode keys

The following notations are used for
key operations.

: Clear memory

CM

➝

(in Calculator mode)

: Letter “U”

U

➝

: Turn the touch

SHIFT

➝

tone on and off

: Letter “V”

V

➝

Part Names

• Purple colored functions are operated by
pressing
appropriate keys.

• In this manual, only the display symbols
necessary for explanation of this product are
shown.

SHIFT

(“SHIFT” is turned on) and the

Telephone Mode

Telephone mode is composed of two directions of
storage memory. Pressing
“1” and “2” on the display.
Use these files for convenience, e.g. business
and private files.
A telephone entry consists of name, address,
E-mail address, and number fields.

Storing telephone entries

1. Press

2. Enter the name, e.g. SMITH

3. Enter the address, e.g. 18

4. Enter the E-mail

TEL

once or
twice to display the
Telephone mode
screen.

and press

SPACE

ENTER

ROAD, and press

address, e.g.

SMBL

SROB
(to enter “@”)
SHARPSEC.COM, and press

• The E-mail address is automatically entered

in small letters.

TEL

toggles between

SPACE

ROBERT,

.

SPACE

EAST

.

ENTER

ENTER

.

5. Enter the phone
number, and then
the fax number if
needed, e.g.

NUMBER?

2–3456–7890
3456–7891

_

012-3456-7890

SPACE SPACE

F
press

ENTER

3456-7891, and

.

• “STORED!” appears briefly, then the Telephone

mode screen is displayed. The telephone entry
is now stored.

Field

The 1st line:
Name, address,
E-mail address

The 2nd and the
3rd lines:
Phone number

Number of
characters

36 characters
or under

Allowable

characters

Alphabetic letters,
numbers, symbols,
“+ – × ÷ .”, space

Numbers, space, –,
F (Fax), P (Pager)

Notes

• The symbol “NAME”, “ADDRESS”, or “E-mail”

is turned on while entering in each field.

• To skip entry of an address, E-mail address, or

number, press

when “ADDRESS?”, “E-
MAIL?”, or “NUMBER?” is displayed. However,
entering a person’s name cannot be skipped.

Using the Organizer for the First Time

Be sure to perform the following operations
before using the Organizer for the first time.

1. Remove the isolating film that is affixed to the
battery holder on the back of the unit.

2. Press the RESET switch with a ball-point pen
or similar object.
“RESET?” is displayed.

3. Press

SHIFT ENTER

to initialize the
Organizer.
After “RESET!” is displayed, Home clock is
displayed. (See “Clock Mode”.) You have
deleted all the memory contents now.

Changing the Guidance Language

Guidance messages can be displayed in 7
languages – English, Dutch, Portuguese, Italian,
German, French, and Spanish. After initializing the
Organizer, the default setting is English.

Entering Characters

• Alphanumeric letters, symbols, and “+ – × ÷ .”
can be entered into the dot display area (the 1st
line).

• Numbers and some characters (only space, –,
and F and P in Telephone mode) can be entered
into the number display area (the 2nd and the
3rd lines).

• Basically letters are entered in capital letters
(“CAPS” is turned on). To enter small letters,

CAPS

press

Entering symbols and letters with an accent
mark

• To enter a symbol, press
the desired symbol appears:

@#$£¥

• To enter a letter with an accent mark, press

SHIFT SHIFT

press the appropriate key repeatedly. (Refer to
the “QUICK REFERENCE GUIDE” inside the
cover.)

• To turn “SHIFT LOCK” off, press

to turn “CAPS” off.

repeatedly until

SMBL

( )~’: /\_&<>ß!?

¡¿

to turn “SHIFT LOCK” on, and

SHIFT

again.

NOTES

• If the Organizer is subjected to strong,
extraneous electrical noises or shocks during
use, an abnormal condition may occur in which
no keys (including
the RESET switch and press

OFF

) will respond. Press

ON

SHIFT ENTER

to

delete all the memory contents.

• To minimize battery consumption, the Organizer
is designed to automatically turn off when no
key has been pressed for approximately 7
minutes.

• The key touch tone is turned on and off by
pressing
on, “

To change the language, press
followed by
desired language, then press

. When the tone is turned

SHIFT

” is turned on.

PREV

or

NEXT

SHIFT LANGUAGE

to select the

ENTER

.

Making corrections

Move the cursor to the character to be corrected.
Enter the correct character to replace the previous
one.

Cursor

The cursor (_) indicates the position for entering a
character. Move the cursor with the cursor keys

).

(

Inserting characters

Each time
the cursor position to allow you to enter a
character.

Deleting characters

Press
position.
Press
have entered and not stored yet.

INS

is pressed, a space is inserted at

DEL

to delete the character at the cursor

C•CE

to clear all the characters that you

Schedule Mode

Schedule mode is used for storing schedule
details (36 characters or under), date and time
(year, month, day, hour, and minute).
In the 1st line the same characters are allowable
as in Telephone mode.

1. Storing schedule entries

1. Press

2. Enter the details and

3. Enter the date and time.

SCHEDULE

to
display the Schedule
mode screen.

ENTER

press

.

• The types of date and time are the same as

the types set for the clock.

• To enter a single-digit date or time, enter “0”

and the digit (e.g. “O2”).

Memo Mode

Notes or other pieces of information that are not
appropriate for Telephone or Schedule mode can
be entered for convenience.
In the 1st line the same characters are allowable
as in Telephone mode. In the 2nd and the 3rd
lines you can enter numbers, –, and space. (36
characters or under can be entered in each line.)

Storing memo entries

1. Press

MEMO

to
display the Memo
mode screen.

Notes for storing and recalling entries

• When the memory is full, “MEMORY FULL!”
appears briefly, and the entry cannot be stored.

• When the symbol “
more information exists. Press
switch the display.

Checking details of entries in Telephone mode

• To display each field on the 1st line, follow the
symbol “

” or “ ” and press or . (The

symbol above the 1st line shows each field.)

” or “ ” is turned on,

or to

4. Press

ENTER

to store in the memory.

Notes

• Schedules for the following dates can be stored:
January 1901 to December 2098.

• If an attempt is made to store an entry without a
date or time, or with an invalid date or time,
“ERROR!” appears briefly. Enter the correct
date and time and press

ENTER

.

2. Alarm for Schedule mode

When the schedule alarm (“ ”) is turned on, it
is set for all the schedule entries. Beeping sounds
for 1 minute when the time for a schedule entry is
reached. Press any key to stop the alarm. The
schedule alarm cannot be set for an individual
entry.

2. Enter the memo item

and numbers.
E.g. UNION

BANK
01
272-0011223

3. Press

• Pressing

ENTER

to store in the memory.

E-MAIL

on the 1st line directly.

• Press and hold
1st line. Press
scroll. Press

C•CE

UNION BANK

01
272–0011223

displays the E-mail address

to start the auto scroll on the

again to stop or restart the

to quit the auto scroll.

_

Clock Mode

Home clock

Home city (with “ ”) Day of the week

LON TUE

Date

2002– 1– 1

Time

A12–00–00

Each time you press
between Home and World clocks. (For World
clock, “

” is not displayed.)

1. Before setting the clock

• The default setting for the date is “YYYY/MM/
DD” (year-month-day). To change the setting to
“MM/DD/YYYY” (month-day-year) or “DD/MM/
YYYY” (day-month-year):

1. Press

Home clock (with “

2. Press

3. Press

desired type.

4. Press

• To change the 12-hour clock to the 24-hour
clock, press
Each time you press
switches.

• In the period of daylight saving time/summer
time, press

2. Setting the clock

1. Press

2. Press

CLOCK

clock (with “ ”).

SHIFT SET

The cursor starts to flash on the city name.

CLOCK

, the clock switches

CLOCK

once or twice to display

”).

SHIFT DATE TYPE

PREV

or

ENTER

to store the new setting.

12 24

in advance (“#” is displayed).

DST

.

NEXT

to select the

(“A” or “P” is cleared).

12 24

, the clock

once or twice to display Home

to start setting.

3. Press

PREV

or

NEXT

to select the
desired time zone. (Refer to the list of cities
described below.)

• Enter the city name, if needed (6 characters

or under). Only one changed name for Home
clock can be stored.

4. Press to move the cursor to the year.

5. Enter the year (4 digits), the month, and the
day (2 digits each).

• The built-in calendar extends from January

1st, 1901, to December 31st, 2098.

6. Press

to select “A” (morning) or “P”

AM/PM

(afternoon) for the 12-hour clock.

7. Enter the time (hours and minutes).

Note:

P12-00: noon, A12-00: midnight

8. Press

ENTER

. The clock starts from “00”

seconds.

Notes

• To enter a single-digit date or time, enter “0”

and the digit (e.g. “02”).

• If you enter an invalid date or time, “ERROR!”

appears briefly. Enter the correct date and time
and press

Zone Display City Zone Display City

No. No.

0 TNG TONGA 10 MOW MOSCOW
1 WLG
2 NOU NOUMEA 12 PAR PARIS
3 SYD SYDNEY 13 LON LONDON

3.3 ADL ADELAIDE 14 AZ0
4 TYO TOKYO 15 -2H
5 HKG
6 BKK BANGKOK 17 CCS CARACAS

6.3 RGN YANGON 18 NYC NEW YORK
7 DAC DHAKA 19 CHI CHICAGO

7.3 DEL
8 KHI KARACHI 21 LAX LOS ANGELES

8.3 KBL KABUL 22 ANC ANCHORAGE
9 DXB DUBAI 23 HNL HONOLULU

9.3 THR TEHRAN 24 MID MIDWAY

ENTER

.

WELLINGTON

HONG KONG

NEW DELHI

11 CAI CAIRO

AZORES ISLANDS

16 RIO

20 DEN DENVER

2hrs behind LON
RIO DE JANEIRO

Recalling entries – Telephone, Schedule, Memo –

First press the desired mode key.

: Recalls entries in forward order

NEXT

PREV

: Recalls entries in reverse order

Sequential search

Press

NEXT

or

PREV

in each mode.

Direct search

• Enter the first characters (8 characters or
under) of the person’s name, schedule details,

NEXT

NEXT

or

or

PREV

or memo item, and press

. Then press

continue performing a direct search.

Sorting order

• Telephone and memo entries are stored by the
first character of the person’s name or memo
item in the following order (case sensitive):

• Schedule entries are stored by date and time.

Note

• When there is no (further or relevant) entry to

to

be recalled, “NOT FOUND!” appears briefly, and
the display returns to the mode screen.

Editing or deleting entries – Telephone, Schedule, Memo –

Editing

1. Recall the entry to be edited.

2. Press

EDIT

. The cursor starts to flash.

• In Telephone mode press

ENTER

several
times to display each field (the address field
and so on).

3. Press , , , or to move the cursor to
the position to be edited.

4. Enter, insert, or delete characters (refer to
“Entering Characters”).

C•CE

• To cancel editing, press

.

5. Press

several times (until “STORED!”

ENTER

appears briefly) to finish editing and to store
the entry.

Deleting

1. Recall the entry to be deleted.

2. Press

DEL

.

•“DELETE?” is displayed.

• To cancel the deletion operation, press

C•CE

.

3. Press

to delete the entry.

ENTER

PRINTED IN CHINA/IMPRIMÉ EN CHINE

02BTO (TINSE0526EHZZ)

EL-6053S English Front sheet

SHIFT

Calculator Mode

Caring for Your Organizer

The Organizer can
calculate numbers of up
to 10 digits. Press

CALC/CONV

several

.

0

times to display the Calculator mode screen
(Calculator → Currency conversion → Unit
conversion → Calculator...).

Calculation

Be sure to press

C•CE, C•CE

the display and memory before performing a
calculation.

Note

• When , , , or is pressed, the respective
symbol, +, –, ×, or ÷ is displayed. (In the
examples in this manual, these symbols are not
described.)

If an error occurs

If the calculation result or the integer section in
the numerical value in the memory exceeds 10
digits or if a number is divided by zero (0), an
error occurs (“ERR” is displayed).

, and CM to clear

Currency/Unit Conversion Mode

1. Setting a currency rate

1. Press

2. Press

3. Press

4. Enter the rate (up to

5. Press

CALC/CONV

several times to
display the currency
conversion mode

EURO USD

.

0

screen (refer to “Calculator mode”).

Example:

1 CAD (Canada dollars)
= 0.66 USD (US dollars)

NEXT

NEXT NEXT

the display and press

SHIFT SET

to change

. The initial

character of “CAD” starts to flash.

• You can change each currency name by
entering characters (up to 4 in each) and
using

, if needed.

ENTER

. “0” starts to flash.

10 digits).

0.66

ENTER

to

CAD USD

.

066

store in the memory.

Calculation examples

Example Operation

(–24+2)÷4=–5.5
34+57=91 34 57
45+57=102 45

68×25=1700 68 25
68×40=2720 40

200×10%=20 200
9÷36=25% 9 36
200+(200×10%)=220
500–(500×20%)=400
46=(43)2=4096 4
1/8=0.125 8

25×5=125
–)84÷3=28 84 3
+) 68+17=85 68 17

182

앀앙앙

25–9=4 25 9
1234567890×145 1234567890 145
=179012344050

C•CE

24 2 4

(The addend becomes a
constant.)

(The multiplicand becomes
a constant.)

200 10
500 20

CM

C•CE

(17.90123440×1010=179012344000)

10

%

25 5

%

%
%

+

M

–

M

+

M
RM

앀앙

Display

–5.5

91.

102.

1700.

2720.

20.

25.

220.

400.

4096.

0.125

M

125.

M

28.

M

85.

M

182.

ERR

17.90123440

17.90123440

2. Converting currency/unit

You need to set the conversion rate before making
the currency conversion.

Example:

1. Display the screen: “CAD → USD”.

2. Enter the value to be converted.

3. Press

Convert 500 CAD into USD using the
rate that you have set.

500

to convert

CAD into USD.

• To convert in
reverse order (e.g.

CAD USD

.

330

200 USD into CAD), enter 200 and press

• You can use the unit conversion in the same
manner. You cannot change the units or the
rates for units.

• The conversion result may have a slight error
as a result of rounding off the number (e.g. up
to 2 decimal places for currency conversions).
Use the conversion result for reference.

• Do not carry the Organizer in the back pocket of
slacks or trousers.

• Do not drop the Organizer or apply excessive
force to it.

• Do not subject the Organizer to extreme
temperatures.

Battery used

Type Model Quantity

Lithium battery CR2025 1

•

Improper replacement of the battery may
change or lose the memory contents.

•

Be sure to write down any important
information stored in the memory before
replacing the battery.

•

Make sure the power is turned off before

4.

replacing the battery.

•

Do not press

OFF

until the battery replacement

ON

procedure is completed.

1. Precautions

Since improper use of the battery may cause
leakage or explosion, strictly observe the
following instructions.

• Insert the battery with the positive side (+)
correctly facing up.

• Never throw the battery into a fire because it
might explode.

• Keep the battery out of the reach of children.

Because the battery in the Organizer was installed
at the factory, it may become depleted before the
specified expiration time is reached.

2. Battery replacement

If the display becomes dim and difficult to read,
immediately replace the battery with a new one.
Continued use of the Organizer with an exhausted
battery can alter or clear the memory contents.

.

•

Do not use a metallic object to pry out the
battery. The Organizer will be subjected to an
electrical shock and all the memory contents
will be cleared.

•

Complete the replacement of the battery within
1 minute, otherwise all the memory contents
may be cleared.

• Since this product is not waterproof, do not use
it or store it where fluids can splash onto it.

• Clean only with a soft, dry cloth.

• Use only a SHARP approved service facility.

Replacing Battery

1. Press

2. Loosen the screw and remove the battery

3. Remove the exhausted battery by prying it out

4. Install a new battery with the positive side (+)

5. Replace the holder cover and secure it with the

6. Press

7. Set the clock.

ON

holder cover on the back of the unit.

from the holder with the corner of the holder
cover. (Fig. 1)

facing up into the holder.

screw.

ON

• If nothing appears on the display, press the
RESET switch and press

• Do not press

SHIFT ENTER

contents.

OFF

to turn the power off.

OFF

to turn the power on.

clears all the memory

When removing the
battery, use the side
opposite the curved
corner of the battery
holder cover.

Fig. 1

ENTER

C•CE

. Pressing

.

Game Mode

GAME

Press

to play the game “ALPHA ATTACK”.

ALPHA ATTACK

Type in characters (A to Z, 0 to 9) displayed on
the 1st line to clear them. The game is divided
into 20 levels in speed.

1. Press

2. Enter the level

GAME

to
display the following
Game mode screen.

number (2 digits

ALPHA ATTACK

01

Level

from 01 to 20).

• 01: slow, 20: fast

3. Press

ENTER

start a game.

to

EY3KW

01

Memory Storage

1. Checking memory storage

1. Press

TEL, SCHEDULE

“NAME?”, “SCHEDULE?”, or “MEMO?”.

2. Press

SHIFT M•CK

The number of
remaining bytes is
displayed briefly.

Notes

• The Organizer can store up to 7671 bytes in the
memory (excluding the Calculator mode
memory).

• One byte is required per character (in the 1st
line) for telephone, schedule, and memo
entries.

• One byte is required for 2 digits in the number
part (in the 2nd and the 3rd lines) of telephone
and memo entries. (When there is an odd
number of digits in a number entry, the last
digit occupies 1 byte.)

MEMO

, or

.

CAPACITY

to display

6254

4. Press the same key as the first character at the
left end of the 1st line. (In this case, press keys
in the order: E → Y → 3 → K → W.)

• Pressing the correct key in the correct order

deletes the character.

• When 12 characters are displayed in each

level, the game continues in the faster level
(up to 20).

• When no more characters can be displayed,

the game is over. The Game mode screen
with the level when the game is over is
displayed.

• In addition to the memory size for characters

(in the 1st line) and numbers (in the 2nd and
the 3rd lines), each entry requires the following
memory size:

Telephone entry ..... 5 bytes

Schedule entry ....... 8 bytes (including date

and time)

Memo entry ........... 3 bytes

2. Deleting all the memory contents

Perform steps 2 and 3 as described in the section,

“Using the Organizer for the First Time”.

• To cancel the deletion operation, press

instead of

SHIFT ENTER

in step 3.

C•CE

Specifications

• Model: EL-6053S

• Product name: Electronic Organizer

• Display: 3 lines of 12 digits

• Memory capacity: 7671 bytes

• Clock mode:

Accuracy: ± 60 seconds/month at 25°C/77°F
Display: Year, month, day, day of the

week, hour, minute, second, AM/PM
Clock function: 12-hour/24-hour format
(switchable), 3 kinds of date type
(switchable), world clock function, daylight
saving time (summer time) display, daily
alarm, hourly alarm

• Telephone mode: Entering and recalling of
telephone entry (name, address, E-mail
address, and phone number

• Schedule mode: Entering and recalling of
schedule entry (details, year, month, day, hour,
and minute), schedule alarm

• Memo mode: Entering and recalling of memo
entry

• Calculator mode: 10 digits (with calculation
status symbols), arithmetical calculations,
percentage, square root, memory calculation,
etc.

• Currency/unit conversion mode:

5 kinds of currency conversion (editable) and 9
kinds of unit conversion

• Game mode: 1 game

• Power consumption: 0.003 W

• Operating temperature: 0°C to 40°C

(32°F to 104°F)

• Power supply: 3V … (DC),

lithium battery

CR2025 × 1

• Auto-power off: Approx. 7 minutes

• Battery life: Approx. 2 years at ambient

temperature of 25°C/77°F, assuming the
following daily use: 30 minutes display, alarm
sounding for 20 seconds and key touch tone
turned on/off 100 times.

• Weight (including battery):
Approx. 87 g (0.19 lb.)

• Dimensions:

Open:

×

128.0 mm (W)

1

5-

/16" (W) × 6-5/8" (D) × 3/8" (H)

167.1 mm (D) × 9.0 mm (H)

Closed:

128.0 mm (W)

1

5-

/16" (W) × 3-3/8" (D) × 1/2" (H)

×

86.6 mm (D) × 12.7 mm (H)

• Accessories: 1 lithium battery (installed),
operation manual

Secret Function

1. Registering a password and storing
secret entries

Up to 6 characters can be registered as the
password.

• One password is valid for Telephone, Schedule,

and Memo modes.

If the password is forgotten, you cannot delete the
password only. You have to delete all the memory
contents. (Perform steps 2 and 3 as described in
the section, “Using the Organizer for the First
Time”.) As a safeguard, make a written record of
the password.

Registering a password

1. Press

2. Press

3. Enter the password (case sensitive), e.g. ABC.

4. Press

5. Press

Storing secret entries

1. Enter characters in Telephone, Schedule, or

2. Press

3. Press

TEL, SCHEDULE

, or

MEMO

to display
“NAME?”, “SCHEDULE?”,
or “MEMO?”.

SECRET

.

PASSWORD?

SECRET

to register it.

• The display returns to the screen in step 1

with the symbol “ ”.

• If “ERROR!” appears briefly, a password has

already been registered. Enter the correct
password or delete the password and all the
memory contents.

SECRET SECRET

function on. “

to turn Secret

” disappears.

Memo mode when “ ” is not displayed
(Secret function is on).

• When “

SECRET

store. “

” is displayed, press

to turn Secret function on.

SECRET

before pressing

” appears.

ENTER

to store a secret entry in the

SECRET

ENTER

to

memory.

•“STORED!” appears briefly, and the display

returns to the mode screen without “

”

(Secret function is on).

• You cannot display the secret entry until you

turn Secret function off.

2. Turning Secret function on and off

When Secret function is on, “ ” is not
displayed.

• You can display, edit, or delete entries
except secret entries.

• You can enter new entries as secret or
non-secret.

When Secret function is off, “

” is

displayed.

• You can display, edit, or delete secret
entries only. (You cannot display non­secret entries.)

• You cannot enter a new entry.

Turning Secret function off

that “

SECRET

TEL, SCHEDULE

” is not displayed.

. “PASSWORD?” is displayed.

1. Press

2. Press

3. Enter the password and press

•“

” is displayed and you can display

, or

MEMO

SECRET

and check

.

secret entries.

• If you enter an incorrect password,
“ERROR!” appears briefly. Follow the above

steps and enter the correct password.

• Even when Secret function is turned off, it
will be automatically turned on (“ ” will
disappear):

A)when you press

CALC/CONV

,

GAME, CLOCK

, or

or B)after the power is turned off manually

or automatically.

Turning Secret function on

1. Press
that “

2. Press

TEL, SCHEDULE

” is displayed.

SECRET

.

, or

MEMO

and check

The password is displayed. Memorize it again.

3. Press

SECRET

“

” disappears and you cannot display

again.

secret entries.

3. Changing the password

1. Turn Secret function off (“ ” appears).

2. Press

3. Press

4. Enter, or edit characters and make a new

5. Press

SECRET

. The password is displayed.

EDIT

.
The initial character of the password starts to
flash.

password.

SECRET

. The new password is now

registered.

SHARP CORPORATION

EL-6053S English Rear sheet