SHARP DV-SV97H QUICK START GUIDE
This Quick Start Guide is intended to provide easy steps regarding each stage of the setup of your DVD Player, so that
you can enjoy the exceptional audio and video quality of DVDs as soon as possible.
See the Operation Manual for full details about operational procedures, precautions, and other information.
Accessories
TV
SHARP
HDMI HDMI
DVD Player
Batteries for
Remote control
Remote control
Operation Manual
Installing batteries
a
b
c
Connecting the TV
CAUTION:
• Be sure to turn off the Player and equipment to be
connected before any connections are made.
• Read through the operation manual for the
equipment to be connected.
• Be sure that the colours of the connectors and
plugs match up when using a VIDEO/AUDIO cable.
• Be sure to keep the Player connection cables
separate from the TV antenna cable when you
install the Player, lest it should cause electrical
interference when you are watching television
programs.
• DTS audio cannot be produced with an analogue
connection.
HDMI cable (commercially available)
TV
SCART SCART
SCART cable (commercially available)
The HDMI cable and SCART cable are not
supplied with the Player. Those cables are
commercially available.
DVD Player
Turning on the Player and TV/
Selecting the AV channel on TV
Turn on the TV.
a
Turn on the Player by pressing OPERATE.
b
DVD Player
OPERATE
• If connections have been made successfully, the
startup screen will appear on your TV screen.
If the startup screen does not automatically
c
appear, select the “AV” channel on your TV by
pressing the “AV” button on your TV’s remote or
on your TV set.
Recheck all your connections.
Printed in Turkey 9JB50074835
06P02-TR-NV
Initial settings
Main operations
• PLAYER SETUP
Player setup can be achieved by pressing:
• OPEN/CLOSE and then DISPLAY
• DISPLAY when “No Disc” is displayed
• STOP twice and then DISPLAY during playback
Press
◄
or ► to select Language, Video, Audio or
others.
Press SELECT to confi rm/select and press ▲ or
for navigation.
Press DISPLAY to exit.
▼
• LANGUAGE SETUP
You can preset your language preferences in
Language Setup Menu.
Note:
Language options are not available with some discs.
TV Type
Press ◄ or ► to select Video and press SELECT.
a
Press ▲ or ▼ to select TV type and press SELECT.
b
• Select 4:3 LB, and black bars will appear at the
top and bottom of the screen.
• Select 4:3 PS for a full-height picture with both
its sides trimmed.
PS is only available on DVDs recorded with this
option. If PS is not available, LB mode will be used.
• Select 16:9 if a wide-screen TV is connected to
the Player.
• The default setting is 4:3 LB.
• AUDIO and SUBTITLE buttons
during playback:
AUDIO and SUBTITLE are used to see and set the
language for the DVD.
• MENU button during playback:
MENU is used to reach the DVD disc Content
Setup Menu. (it is also known as DVD root menu.)
• DISPLAY button during playback:
DISPLAY can be used as info button.
If you press DISPLAY during playback, some
information about disc content will be displayed.
• REPEAT button:
Play mode can be changed.
Subsequent performances differ depending on the
disc type.
• Disc menu:
After placing an MP3, DivXR, MPEG-4 or JPEG fi le
disc, the Disc menu appears.
You can navigate and select the required Repeat
mode this way.
Moving to the beginning of the title/chapter/
track
There are three ways to begin playback on a DVD,
Audio CD or VCD at a specifi c title/chapter/track.
Loading and playing a DVD
Before loading a disc, check to make sure it is of a
type supported by this Player. (See on the Operation
Manual for more informaiton about supported discs).
Getting started
•
Turn on the power of the TV, amplifi er and any other
components which are connected to the Player.
• Make sure the TV and audio receiver (commercially
available) are set to the correct channel.
• Region 2 or ALL (PAL and NTSC) discs are
supported.
Press OPERATE.
a
Press OPEN/CLOSE to open the disc tray.
b
Place the disc onto the tray, with
c
its printed title side facing up.
Press PLAY/PAUSE.
d
Press STOP to pause playback.
e
•
Press PLAY/PAUSE to resume
playback from the paused position.
Press STOP again to stop
f
playback.
Using number buttons
Press number buttons to enter the desired title/
chapter/track number.
(
Using SKIP/FRAME
Press SKIP/FRAME to move to the next one.
Press SKIP/FRAME to move to the previous one.
)
,
Using SEARCH MODE
Time or title/chapter/track numbers can be set.
Accordingly, playback can be started in the way you
like. In addition, you can bookmark any time point on
the disc.
Search mode depends on the number of times
SEARCH MODE is pressed.
Each time SEARCH MODE is pressed, the disc will
be searched in the order shown below:
DVD
Time point and title/chapter search Bookmark
CD VCD
Track search
Disc search Bookmark
without PBC function
Loading...