Page 1
Date : Jun. 8, 1999
Dupplicator: SD-2175/2275
1. Partial abolishment of circuit of main harness R
2. Change of SW back motor fixing screws
1. Partial abolishment of circuit of main harness R
1. Model Name SD-2275/2175(100V System)
2. General To improve the productivity, the dry heater section circuit of main harness R used in the
overseas models is disused.
* A drawing is separately attached.
No : DTE-398
3. Action Running change from the production in March, 1999
SHARP CORPORATION Document Division I
1/3
Green
C
Page 2
2. Change of SW back motor fixing screws
1. Model Name SD-2275/2175
2. General To improve the engagement of SW back motor gear and transport gear, the fixing screw with
spring washer is changed to that with spring washer and flat washer.
(Before change)
M3x6 screw (with SP washer) XBPSD30P06K00
Q’ty: 2 → 0
(After change)
M3x6 screw (with SP washer and flat washer) XBPSD30P06KS0
Q’ty: 0 → 2
3. Action From the production in April, 1999
2/3
Page 3
Model
No
1 SD-2275
2 SD-2175 31 -69 XBPSD30P06K00 XBPSD30P06KS0 DD
<Interchange>
1. Interchangeable. 4. Not interchangeable.
2. Current type can be used in place of new type.
3. Current type cannot be used in place of new type.
Parts marked with "
for maintaining the safety and performance of the set.
Version
name
New type cannot be used in place of current type.
New type can be used in place of current type.
P/G
No.
" is important for maintaining the safety of the set. Be sure to replace these parts with specified ones
Current parts New parts
Parts code Parts code
DHAI-3028FCZZ
DHAI-3031FCZZ
5. Interchangeable if replaced with same types of related
parts in use.
6. Others.
Price
rank
RB
Parts name
Main
harness R
Screw
(3×6)
Effec-
Inter-
tive
change-
time
ability
Mar./99 4
Apr./99 4
Note
Running
change
From
production
in Apr.
3/3
Loading...