SHARP dte392 Technical Report

Date : Dec. 21,1998

Duplicator: SD-2260

Increase of bearing strength

1. Model Name: SD-2060/3062/2260/2275/2175

2. General: For the bearing in the transport unit, it was changed to the resin bearing before to improve the

productivity. However, it is changed back to the bearing used before change since it is rarely damaged halfway through the production process.

No. : DTE-392

3. Action: From the middle of production in October, 1998.

SHARP CORPORATION Reprography Division

1/2

Green

Model

SD-2060 SD-3062

SD-2260 SD-2275

SD-2175 AM 3

Version P/G No.

name

15 -11

ALL

16 -11

1. Interchangeable. 4. Not interchangeable.

2. Current type can be used in place of new type. New type cannot be used in place of current type.

3. Current type cannot be used in place of new type. New type can be used in place of current type.

Parts marked with " " is important for maintaining the safety of the set. Be sure to replace these parts with specified ones for maintaining the safety and performance of the set.

Current parts New parts

Parts code Parts code

NBRGP0555FCZZ NBRGY0131FCZZ

5. Interchangeable if replaced with same types of related

6. Others.

Price

rank

EG/AM

parts in use.

Parts

name

Bearing

Effec-

tive

time

Mid-

’98/10

Inter-

change-

ability

Note

2/2