SHARP dte391 Technical Report
Date : Dec.14,1998
Duplicator: SD-2260
1. Change of fusing motor supplying manufacturer
(improvement of productivity)
2. Disuse of table glass rubber
(improvement of productivity)
1. Change of fusing motor supplying manufacturer (improvement of productivity)
1. Model Name: SD-2260
No. : DTE-391
2. General: For the purpose of improving the productivity the fusing motor supplying manufacturer is
changed, and at the same time the parts code is also changed.
3. Action: From the middle of production in December, 1998 (Running change)
2. Disuse of table glass rubber (improvement of productivity)
1. Model Name: SD-2060/3062/2260/2275/2175
2. General: For the purpose of improving the productivity the table glass rubber is partially is disused.
SHARP CORPORATION Reprography Division
1/2
Green
C
3. Action: From the 1st unit of production in November, 1998
Ref.
Model
No.
name
1 SD-2260 ALL
SD-2060
SD-3062
2
SD-2260
SD-2275
SD-2175 USA Only
<Interchange>
1. Interchangeable. 4. Not interchangeable.
2. Current type can be used in place of new type.
New type cannot be used in place of current type.
3. Current type cannot be used in place of new type.
New type can be used in place of current type.
Parts marked with " " is important for maintaining the safety of the set. Be sure to replace these parts with specified ones
for maintaining the safety and performance of the set.
Version P/G No.
9 -31
5 -59
ALL
7 -59
Current parts New parts
Parts code Parts code
RMOTP0803FCZZ RMOTP0823FCZZ LP/BQ Fusing Motor
PGUMS0236FCZZ Disuse in two places DJ/AB
5. Interchangeable if replaced with same types of related
parts in use.
6. Others.
Price
rank
Parts name
Table Glass
Rubber
Effec-
tive
time
’98/12
Running
Change
’98/11
1st lot
change-
Inter-
Note
ability
1
6
2/2
Loading...