SHARP dte390 Technical Report

Date : Nov.17,1998

Duplicator: SD-2260

1. Disuse of tap on the lock arm fixing plate
(Improvement of productivity)

2. Material change of assistance CL roller bearing
(Improvement of productivity)

3. Screw change of intermediate tray section

1. Disuse of tap on the lock arm fixing plate (Improvement of productivity)

No. : DTE-390

1. Model Name: SD-2060/3062/2260/2275

2. General: In order to improve the productivity, the tap on the lock arm fixing plate used in the 2nd and 3rd

paper feeding tray section is disused. Moreover, the screw is changed.

3. Action: From the first unit of production in October, 1998

SHARP CORPORATION Reprography Division

1/3

Green

C

2. Material change of assistance CL roller bearing (Improvement of productivity)

1. Model Name: SD-2060/3062/2260/2275

2. General: In order to improve the productivity, the material of assistance CL roller bearing used in the

fusing unit is changed.

3. Action: From the middle of production in October, 1998 (Running change)

3. Screw change of intermediate tray section (Improvement of productivity)

1. Model Name: SD-2060/3062

2. General: In order to improve the productivity, the tap for screw hole on the intermediate tray section D

frame F was disused before. However, the screw change was omitted at that time. Therefore,
we inform you of it this time.

3. Action: From the middle of production in October, 1998

2/3