SHARP DTE385 Technical Report
Date : Aug. 5,1998
DUPLICATOR: SD-2260/2275
No. : DTE-385
Parts change for better productivity
1. Model Name: SD-2060/3062/2260/2275
2. General: In order to improve the productivity, some manufacturers of parts and the material are changed.
3. Description: m Changed parts and thier description
(1) The manufacturer of SB roller in the switch back section is changed.
(We have informed you about the change of SB roller in the discharge section by the
T/R DTE-381.)
(2) The material and shape of paper guide open/close sheet in the switch back section
are changed.
(3) The manufacturer of fusing drive shaft in the rear frame section is changed.
4. Action: From the middle of the production in July, 1998 (Running change)
Ref.
No.
(1)
(2)
Model
name
SD-2060
3062
SD-2260
2275
SD-2060
3062
SD-2260
2275
Version P/G No.
32 - 7
ALL
32 - 3
Current parts New parts
Parts code Parts code
CROLP0945FC33 CROLP0945FC36 AS SB Roller Unit
PSHEZ3325FCZZ PSHEZ3325FCZ1 AC
Price
rank
Parts name
Paper Guide
Open And
Shut Sheet
Effec-
tive
time
Mid-
’98/7
Inter-
change-
ability
1
Note
SHARP CORPORATION Reprography Division
1/2
Green
C
Ref.
Model
No.
name
SD-2060
(3)
SD-2260
<Interchange>
1. Interchangeable. 4. Not interchangeable.
2. Current type can be used in place of new type.
New type cannot be used in place of current type.
3. Current type cannot be used in place of new type.
New type can be used in place of current type.
Parts marked with " " is important for maintaining the safety of the set. Be sure to replace these parts with specified ones
for maintaining the safety and performance of the set.
Version P/G No.
3062
2275
8
ALL
9 - 36
Current parts New parts
Parts code Parts code
NSFTZ2290FCZZ NSFTZ2290FCZ1 AN
5. Interchangeable if replaced with same types of related
6. Others.
Price
rank
parts in use.
Parts name
Fusing Drive
Support Shaft
Effec-
tive
time
Mid-
’98/7
Inter-
change-
ability
Note
1
2/2
Loading...