DUPLICATOR : SD-2275
No. : DTE-380
MEASURE TO PREVENT PROBLEMS OF LOOSE TAB TERMINALS.
1.Model Name: SD-2260/2275
2.General: A change has been carried out in the support tab terminals for the PWB. This action
has been carried out as a measure to prevent problems of looseness in the tab
terminals of the AC circuit PWB.
3.Action: From the start of 1998 June production.
Ref.
Model
No.
SD-2260
SD-2275
<Interchange>
1. Interchangeable. 4. Not interchangeable.
2. Current type can be used in place of new type.
3. Current type cannot be used in place of new type.
Parts marked with " " is important for maintaining the safety of the set. Be sure to replace these parts with
specified ones for maintaining the safety and performance of the set.
Version P/G No.
name
All 57 -14 QTANP0193FCZZ QTANP0209FCZZ AC Tab terminal
New type cannot be used in place of current type.
New type can be used in place of current type.
Current parts New parts
Parts code Parts code
Effec-
Price
5. Interchangeable if replaced with same types of
related parts in use.
6. Others.
Parts name
rank
tive
time
1st lot
'98/6
Inter-
change-
ability
3
Note
SHARP CORPORATION Reprography Division
Green
C