SHARP DTE378 Technical Report
Date: Jun. 25,1998
DUPLICATOR: SD-2275
1. Countermeasure against white line on the copied
image
2. Use of recycled material
1. Countermeasure against white line on the copied image
1. Model Name: SD-2275
2. General: As both sides of DVAG seal bonded on the DV unit to prevent toner from flying out is broken or
No. : DTE-378
bent, a white line may be produced on the copied image.
As the countermeasure, R is added to the sides of the DVAG seal in order to prevent them from
being broken or bent.
3. Action: From 1st unit of the production in May, 1998
2. Use of recycled material
1. Model Name: SD-2060/2260/2275/3062/4085
2. General: As the environmental countermeasure, some resin parts of the above models are changed to
those which use the recycled materials.
For the relevant parts and part codes, also refer to the parts list.
3. Action: From the middle of the production in May, 1998(Running change)
SHARP CORPORATION Reprography Division
1/2
Green
C
Ref.
Model
No.
name
1
SD-2275
SD-2060
SD-2260
SD-2060
SD-4085 3 - 6
SD-2060
2
SD-2260
SD-2275
SD-2060
SD-4085 3 - 3
Version
3062
2275
3062
2275
ALL
3062
3062
P/G No.
15 - 76
15 - 79
10 - 55
11 - 55
33 - 1
33 - 3
13 - 6
14 - 6
13 - 1
14 - 1
13 - 3
Current parts
Parts code
PSEL-0762FCZZ PSEL-0762FCZ1
PDUC-0146FCZZ PDUC-0146FCZ1
PCOVP1173FCZZ PCOVP1173FCZ1
PDUC-0142FCZZ PDUC-0142FCZ1
PDUC-0143FCZZ PDUC-0143FCZ1
PGIDM1445FCZZ PGIDM1445FCZ1
LDAIU0466FCZZ LDAIU0466FC10
LDAIU0466FCZ1 LDAIU0466FC11
LDAIU0466FCZ2 LDAIU0466FC12
LDAIU0466FCZ3 LDAIU0466FC13
LDAIU0466FCZ4 LDAIU0466FC14
LDAIU0466FCZ5 LDAIU0466FC15
LDAIU0467FCZZ LDAIU0467FCZ2
New parts
Parts code
Parts name
Price
rank
AC Dvag Seal
AK DV Fan Duct
AR Process Cover
AQ DV Duct A
AL DV Duct B
AP Cartridg GuideSD-2260
Shutter Base
A Upper
Shutter Base
B Upper
Shutter Base
A Upper
Shutter Base
B Upper
AH
Shutter Base
A Upper
Shutter Base
B Upper
C Shutter Base
LowerSD-2260 14 - 3
Effec-
tive
time
1st lot
’98/5
Mid-
’98/5
Inter-
change-
ability
3
1
Note
2/2
<Interchange>
1. Interchangeable. 4. Not interchangeable.
2. Current type can be used in place of new type.
New type cannot be used in place of current type.
3. Current type cannot be used in place of new type.
New type can be used in place of current type.
Parts marked with " " is important for maintaining the safety of the set. Be sure to replace these parts with specified ones
for maintaining the safety and performance of the set.
5. Interchangeable if replaced with same types of related
parts in use.
6. Others.
Loading...