SHARP DTE375 Technical Report
Date: Jun. 8, 1998
DUPLICATOR: SD-2260
1. Change of part code along with change of vendor
(for better productivity)
2. Change of part for better productivity
3. Change of part for better productivity
4. Change of screw for better productivity
1. Change of part code along with change of vendor (for better productivity)
1. Model Name: SD-2260/2275
No. : DTE-375
2. General: As the vendor is changed, the part codes of some parts used in the duplex section are
changed. For the changed parts, refer to the parts list.
3. Action: From the 1st unit of the production in April, 1998
2. Change of part for better productivity
1. Model Name: SD-2260/2275/3062
2. General: To improve the productivity, some parts used in the transfer unit section are changed.
3. Description:
Model
name
(1)
(2) Driven roller unit 16 - 2 Change of vendor
(3) Transport paper guide D 16 - 4
SD-2260
2275
(4) Transport paper guide E 16 - 21
Parts name
Transport roller 6 16 - 3 Rubber roller is abolished.
P/G
No.
Change content
Change of spot-welded area
(5) Transport stay C 16 - 82
(6) Transport lock lever 16 - 116
(7) SD-3062 Transport paper guide E 15 - 21 Change of spot-welded area
4. Action: From the 1st unit of the production in April, 1998
SHARP CORPORATION Reprography Division
Change of material
1/4
Green
C
3. Change of part for better productivity
1. Model Name: SD-2060/3062/2260/2275
2. General: To improve the productivity, some parts used in the duplex section are changed.
3. Description: (1) Abolishment of fixed upper PG connection mylar (PSHEP3503FCZZ)
(2) Abolishment of fixed upper PG sheet (PSHEP3548FCZZ)
(3) Material change of SK gear 1 (NGERH0612FCZZ)
(4) Before change After change
D frame F(LFRM-0761FCZ1)
Guide roller shaft B(NSFTZ1918FCZZ) D frame F AS(CFRM-0761FC01)
M4 nut(XNESD40-32000)
The new D frame AS is an assembly of the old guide roller shaft B and M4 nut, being interchangeable as a set.
(5) Like (4), the D frame R AS (CFRM-0762FC02) also becomes CFRM-0762FC03.
4. Action: From the 1st unit of the production in April, 1998
4. Change of screw for better productivity
1. Model Name: SD-2060/3062/2260/2275
2/4
Loading...