SHARP DTE370 Technical Report

Date: Mar. 13, 1998

DUPLICATOR SD-2260/2275

No. : DTE-370

Change of AC power supply PWB fixing plate

1. Model Name: SD-2260/2275

2. General: For SD-2275, the AC power supply PWB is changed as follows from the 1st unit of mass

production. Therefore, make a correction of Parts Guide.

3. Action:

<P/G No.>

46 - 13

<Old>

LPLTM5140FCZ2

<New>

LPLTM5140FCZ3
Since some errors are found in the parts guide of the above model, they are corrected.
As the above change is made, the same change is made for SD-2260 using parts in common
with SD-2275.

SD-2260 → From the middle of production in December, 1997
SD-2275 → From the 1st unit of mass production

Ref.

Model

No.

name

SD-2260

SD-2275 1st lot 3

1. Interchangeable. 4. Not interchangeable.

2. Current type can be used in place of new type.
New type cannot be used in place of current type.

3. Current type cannot be used in place of new type.
New type can be used in place of current type.

Parts marked with " " is important for maintaining the safety of the set. Be sure to replace these parts with specified ones
for maintaining the safety and performance of the set.

Version P/G No.

ALL 46 -13 LPLTM5140FCZ2 LPLTM5140FCZ3 AY

Current parts New parts

Parts code Parts code

5. Interchangeable if replaced with same types of related
parts in use.

6. Others.

Price

rank

AC power supply
PWB fixing plate

Parts name

Effec-

tive

time
Mid-

’97/12

Inter-

change-

ability

1

Note

SHARP CORPORATION Reprography Division

Green

C