SHARP DTE368 Technical Report
Date: Mar. 16, 1998
DUPLICATOR: SD-4085
Addition of magnet catch to the exteriors
1. Model Name: SD-4085
2. General: We informed you about the abolishment of magnet catch and fixing screws at the item 4 in the
Technical Report already issued. However, for certain reasons of production, the magnet catch
No. : DTE-368
is added at the same place again.
<P/G No.> <Parts name> <Parts code>
2 -69 Magnet catch PMAGT0072FCZZ
2 -B7 Screw XEBSD40P08000
3. Action: From the 1st unit of production in November, 1997
SHARP CORPORATION Reprography Division
1/2
Green
C
Ref.
Model
No.
name
SD-4085 ALL
<Interchange>
1. Interchangeable. 4. Not interchangeable.
2. Current type can be used in place of new type.
New type cannot be used in place of current type.
3. Current type cannot be used in place of new type.
New type can be used in place of current type.
Parts marked with " " is important for maintaining the safety of the set. Be sure to replace these parts with specified ones
for maintaining the safety and performance of the set.
Version
P/G No.
2 -69
2 -B7 XEBSD40P08000 AA Screw
Current parts
Parts code Parts code
-
New parts
Parts name
Price
rank
PMAGT0072FCZZ AF Magnet catch
5. Interchangeable if replaced with same types of related
parts in use.
6. Others.
Effec-
tive
time
1st lot
’97/11
change-
Inter-
ability
6
Note
Quantity
2
2/2
Loading...