SHARP DTE360 Technical Report
Date: Feb. 26, 1998
DUPLICATOR SD-2275
1.
Change of parts in the transfer unit
2.
Change of screws which fasten the thermistor in
the developing unit
3.
Shape change of pin in the drum drive unit
1. Change of parts in the transfer unit
1. Model Name: SD-2060/2260/2275/3062
No. : DTE-360
2. General: For better productivity, the materials of the following parts used in the transfer unit are
changed.Accordingly, their part codes are also changed.
<Part name> <Old> <New>
•
Paper guide rotation support plate F1
•
Paper guide rotation support plate R2
•
PC rotation support plate RAAS2
CPLTM3371FC03 →
CPLTM3371FC04 →
CPLTM3378FC02 →
CPLTM3371FC07
CPLTM3371FC08
CPLTM3378FC04
3. Action: Production in January, 1998 (Running change)
2. Change of screws which fasten the thermistor in the developing unit
1. Model Name: SD-2060/2260/2275/3062
2. General: For better serviceability and reliability, the screws which fasten the thermistor are changed.
3. Action: 1st product in January, 1998
SHARP CORPORATION Reprography Division
1/3
Green
C
3. Shape change of pin in the drum drive unit
1. Model Name: SD-2060/2260/2275/3062
2. General: When the process unit is inserted, the drum drive gear in the drum drive unit is designed to
slide. During sliding, the parallel pin (See the illustration below.) of the drum drive gear
sometimes gets off to possibly result in the improper operation. As the countermeasure, the
parallel pin is changed to the T type pin.
3. Action: 1st product in January, 1998
2/3
Loading...