SHARP DTE358 Technical Report

Date:Mar. 27, 1998

DUPLICATOR SF-2050

No. : DTE-358

[Part change information]

Change of developing bearing retaining F

1. Model Name: SF-2050

2. General: In order to improve the relief of paper jammed in the developing unit of the above model, the

developing bearing retaining F is abolished along with the change of the upper hook installing plate, and the bearing retaining HPF which also works as the stopper of the upper hook installing plate is added.

3. Description:

4. Action: Production in October, 1997

Ref.

Model

No.

name

SF-2050

1. Interchangeable. 4. Not interchangeable.

2. Current type can be used in place of new type. New type cannot be used in place of current type.

3. Current type cannot be used in place of new type. New type can be used in place of current type.

Parts marked with " " is important for maintaining the safety of the set. Be sure to replace these parts with specified ones for maintaining the safety and performance of the set.

Version P/G No.

Except

Japan

16 -34 LFIX-0486FCZZ

Current parts New parts

Parts code

LFIX-0515FCZZ

5. Interchangeable if replaced with same types of related parts in use.

6. Others.

Price

rank

Bearing retaining

HPF plate

Parts name

Effec-

Inter-

tive

change-

time

ability

97/10 3

Note

SHARP CORPORATION Reprography Division

Green