SHARP DTE353 Technical Report

Date: Feb. 10, 1998

DUPLICATOR SD-2060

No. : DTE-353

Request for correction of technical report (DTE-332)

1. Model Name: SD-2060/3062

2. General: In the technical report (DTE-332) "Subject: Countermeasure to prevent suction belt from

sticking" already issued, there is an error on the old part code of the suction belt. Correct it as follows. Moreover, along with this change, it is reported herein that the supply method of the suction belt is also changed (2-unit assembly → Single supply).

Ref.

Model

No.

name

SD-2060

SD- 3062

1. Interchangeable. 4. Not interchangeable.

2. Current type can be used in place of new type. New type cannot be used in place of current type.

3. Current type cannot be used in place of new type. New type can be used in place of current type.

Parts marked with " " is important for maintaining the safety of the set. Be sure to replace these parts with specified ones for maintaining the safety and performance of the set.

Version P/G No.

30 -16

ALL

Current parts

Parts code

CBLTH0223FC31

New parts

Parts code

NBLTH0311FCZZ

5. Interchangeable if replaced with same types of related parts in use.

6. Others.

Parts name

Price

rank

AP Suction belt Z

Effec-

tive

time

1st lot ’97/11

Inter-

change-

ability

Note

Quantity

SHARP CORPORATION Reprography Division

Green