SHARP DTE352 Technical Report
Date: Jan. 8, 1998
DUPLICATOR SD-3075/3076
No. : DTE-352
Change of parts in the transfer unit
1. Model Name: SD-3075/3076
2. General: In order to improve the productivity, the parts in the transfer unit are changed.(For the changed
parts, refer to the parts list.)
4. Action: 1st product in December, 1997
Ref.
Model
No.
name
SD-3075
1
<Interchange>
1. Interchangeable. 4. Not interchangeable.
2. Current type can be used in place of new type.
New type cannot be used in place of current type.
3. Current type cannot be used in place of new type.
New type can be used in place of current type.
Parts marked with " " is important for maintaining the safety of the set. Be sure to replace these parts with specified ones
for maintaining the safety and performance of the set.
3076
Version P/G No.
12 -8 CPLTM3371FC02 CPLTM3371FC06 AN
12 -18 CPLTM3371FC01 CPLTM3371FC05 AK
12 -40 LSTPF0257FCZZ LSTPF0257FCZ1 AF
12 -115 LPLTM3374FCZZ LPLTM3374FCZ1 AU
ALL
12 -117 CGIDH1168FC01
12 -125 CPLTM3378FC01 CPLTM3378FC03 AK
12 -126 CPLTM3378FC02 CPLTM3378FC04 AK
12 CGIDH1170FC02 CGIDH1170FC04 BB
Current parts New parts
Parts code Parts code
CGIDH1168FC03
5. Interchangeable if replaced with same types of related
parts in use.
6. Others.
Parts name
Price
rank
PC rotation hold
plate F2
PC rotation hold
plate F
PC rotation
stopper
Slider Pixing
plate R
AZ Paper guide PE
PC rotation hold
plate R
PC rotation hold
plate R2
Paper guide PG
N
Effec-
tive
time
1st lot
’97/12
Inter-
change-
ability
1
Note
SHARP CORPORATION Reprography Division
Green
C
Loading...