SHARP DTE350 Technical Report

Date: Feb. 5, 1998

DUPLICATOR SD-2275

No. : DTE-350

1. Standardization of parts in the fixing drive unit

2. Correction of parts guide

1. Standardization of parts in the fixing drive unit

1. Model Name: SD-2275 (excluding European type)

2. General: In order to standardize the parts for the other export types, the following parts in the fixing drive

unit are changed.

FU drive plate D CPLTM5151FC01 → CPLTM5151FC02

Development drive shaft NSFTZ2291FCZZ → NSFTZ2291FCZ1

3. Action: 1st product in December, 1997

2. Correction of parts guide

1. Model Name: SD-2275 (*excluding Japan/USA/Canada types)

2. General: Since the following parts which were changed at the 1st mass-produced product, correct the

parts guide.

DC power supply PWB 59 -901 CPWBF1247FC31

→

CPWBF1317FC31

Coil 46 -37 RCILF0079FCZ1 → RCILF0094FCZZ

Cement resistor 46 -38 CR-WZ0464FC01 → CR-WZ0464FC03

3. Action: 1st mass-produced product

SHARP CORPORATION Reprography Division

1/2

Green

Ref.

Model

No.

name

1 SD-2275

2 SD-2275

1. Interchangeable. 4. Not interchangeable.

2. Current type can be used in place of new type. New type cannot be used in place of current type.

3. Current type cannot be used in place of new type. New type can be used in place of current type.

Parts marked with " " is important for maintaining the safety of the set. Be sure to replace these parts with specified ones for maintaining the safety and performance of the set.

Version

ALL

]

P/G No.

24 -4

24 -13

59 -901

46 -37 46 -38

Current parts

Parts code Parts code

CPLTM5151FC01 CPLTM5151FC02 AT FU drive plate D

NSFTZ2291FCZZ

CPWBF1247FC31

RCILF0079FCZ1

CR-WZ0464FC01 CR-WZ0464FC03 AW Cement resistor

New parts

NSFTZ2291FCZ1

CPWBF1317FC31

RCILF0094FCZZ

5. Interchangeable if replaced with same types of related parts in use.

6. Others.

Price

rank

Fusing drive

shaft DC power supply

PWB

BF Coil

Parts name

Effec-

tive

change-

time

1st lot ’97/12

1st lot 4

Inter-

Note

ability

2/2