Date: Feb. 5, 1998
DUPLICATOR SD-2260
Countermeasure as white swan type (noise standard)
1. Model Name: SD-2275 (European models)
2. General: As the countermeasure as white swan type (noise standard), the following parts are changed
and added.
No. : DTE-349
a. Addition of one screw hole (φ3.65) in the fixing drive unit
SHARP CORPORATION Reprography Division
1/4
Green
C
b. Change of fixing drive shaft in the fixing drive unit
c. Addition of fixing drive connection stay and fastening screw in the fixing drive unit
2/4
d. Addition of two paper-discharge noise insulating sheets on the right cabinet
e. Addition of molts (3 kinds) on the outer rear panel
3/4
3. Action: 1st product in December, 1997
Ref.
Model
No.
name
1 SD2275
<Interchange>
1. Interchangeable. 4. Not interchangeable.
2. Current type can be used in place of new type.
New type cannot be used in place of current type.
3. Current type cannot be used in place of new type.
New type can be used in place of current type.
Parts marked with " " is important for maintaining the safety of the set. Be sure to replace these parts with specified ones
for maintaining the safety and performance of the set.
Version P/G No.
24 -4
24 -13
24
European
type
1
Current parts New parts
Parts code Parts code
CPLTM5151FC01
NSFTZ2291FCZZ NSFTZ2291FCZ1 AN
-
CPLTM5151FC02
LSTYM0234FCZZ AF
PSHEP4584FCZZ
PMLT-1148FCZZ
PMLT-1149FCZZ
PMLT-1151FCZZ
5. Interchangeable if replaced with same types of related
6. Others.
Price
rank
AT FU drive plate D
AK
AP
AX
AZ
parts in use.
Parts name
Fusing drive
shaft
Fixing drive
connection stay
Paper-discharge
noise insulating
sheet
Outer rear mold,
left
Outer rear mold,
left upper
Outer rear mold,
right upper
Effec-
tive
time
1st lot
’97/12
change-
Inter-
Note
ability
3
6
4/4
Loading...