SHARP DTE348 Technical Report

Date: Feb. 5, 1998

DUPLICATOR SD-2260

1. Shape change of hand supply paper guide, lower

2. Change of parts in the fixing drive unit

1. Shape change of hand supply paper guide, lower

1. Model Name: SD-2260

2. General: In order to increase the margin of the paper supply performance of label paper in the hand-supply

No. : DTE-348

operation, the shape of the hand-supply paper guide, lower is changed.

3. Action: Way of production in November, 1997 (running change)

SHARP CORPORATION Reprography Division

1/2

Green

2. Change of parts in the fixing drive unit

1. Model Name: SD-2260

2. General: In order to standardize the parts for common use with other models, the following parts of the

fixing drive unit are changed.

FU drive plate D CPLTM5151FC01 → SPLTM5151FC02

Fixing drive shaft NSFTZ2291FCZZ → NSFTZ2291FCZ1

3. Action: 1st product in December, 1997

Ref.

Model

No.

name

SD-2260

1. Interchangeable. 4. Not interchangeable.

2. Current type can be used in place of new type. New type cannot be used in place of current type.

3. Current type cannot be used in place of new type. New type can be used in place of current type.

Parts marked with " " is important for maintaining the safety of the set. Be sure to replace these parts with specified ones for maintaining the safety and performance of the set.

Version P/G No.

ALL

24 -4

24 -13

Current parts

Parts code Parts code

PGIDM1705FCZZ PGIDM1705FCZ1 AY

CPLTM5151FC01 CPLTM5151FC02 AT FU drive plate D

NSFTZ2291FCZZ

New parts

NSFTZ2291FCZ1

5. Interchangeable if replaced with same types of related parts in use.

6. Others.

Price

rank

Parts name

Manual paper guide lower

Fusing drive shaft

Effec-

tive

time

Mid-

’97/11

1st lot ’97/12

change-

Inter-

Note

ability

2/2