SHARP DTE347 Technical Report

Date: Jan. 28, 1998

DUPLICATOR SD-4085

No. : DTE-347

Skipping of parts setting in the technical report (DTE-302)

1. Model Name: SD-4085

2. General: Technical report already issued. Since two kinds of parts are skipped in "MEASURE TO

ALLEVIATE PROBLEMS OF IMAGE MISALIGNMENT AND TEARING OF THE GLASS
MYLAR IN THE RDH.", please add the following.

<Part name> <Part code> <Quantity>

Parallel φ 3 × 12

LPiNS0096FCZZ 4 pcs

E7 XRESP70-08000 4 pcs

Ref.

Model

No.

name

1 SD-4085

<Interchange>

1. Interchangeable. 4. Not interchangeable.

2. Current type can be used in place of new type.
New type cannot be used in place of current type.

3. Current type cannot be used in place of new type.
New type can be used in place of current type.

Parts marked with " " is important for maintaining the safety of the set. Be sure to replace these parts with specified ones
for maintaining the safety and performance of the set.

Version P/G No.

55

ALL

56

Current parts New parts

Parts code Parts code

- LPiNS0096FCZZ AB Parallel φ 3 × 12

XRESP70-08000

Quantity change

(16 → 20)

5. Interchangeable if replaced with same types of related

6. Others.

Price

rank

AA E7

parts in use.

Parts name

Effec-

tive

time

1st lot

’97/4

change-

Inter-

ability

6

Note

Quantity

4

SHARP CORPORATION Reprography Division

Green

C