![](/html/4d/4df5/4df51e187df59c100006b96e982412a1cb90914b16e6c803bf4e45d309edf62b/bg1.png)
Date: Jan. 26, 1998
DUPLICATOR SD-4085
1. Change of exposure belt tension plate in ROM unit
2. Abolishment of part in the process unit
3. Change of RDM vacuum fan unit fixing screws
4. Abolishment of magnet catch of external part
1. Change of exposure belt tension plate in ROM unit
1. Model Name: SD-4085
No. : DTE-345
2. General: In order to increase the margin for the image blurring, the thickness of the exposure belt tension
plate is changed from t1.2 to t1.6.
<Old> <New>
CPLTM5174FC01
(Plate thickness t1.2)
→
CPLTM5174FC02
(Plate thickness t1.6)
3. Action: 1st product of September, 1997
SHARP CORPORATION Reprography Division
1/4
Green
C
![](/html/4d/4df5/4df51e187df59c100006b96e982412a1cb90914b16e6c803bf4e45d309edf62b/bg2.png)
2. Abolishment of part in the process unit
1. Model Name: SD-4085
2. General: In order to increase the productivity, the following parts in the process unit are abolished.
Part name Part code Q’ty
PTL PWB cover A PCOVP 1094 FCZZ 1
PTL PWB cover B PCOVP 1095 FCZZ 1
Number label D TLABZ 2729 FCZZ 1
Screw (4 × 8)
LX-BZ 0527 FCZZ 3
Along with this change, JAM release instruction label (TLABM3019FCZZ) bonded on the
SEEG type is changed to be directly bonded at the bottom of the process frame.
3. Action: 1st product of November, 1997
2/4